Position: Embedded Software Developer Department: Research & Development Reporting To: General Manager Location: Bengaluru Key Responsibilities Embedded System Development Work with a team of developers to design, create, and implement **embedded systems and applications** for R&D projects, which will later be integrated into BFW machines. Develop embedded software from requirements gathering to production and commercial deployment. Assist an in-house team of embedded developers in the creation of **prototype boards, coding, and testing**. Demonstrate previous embedded projects, including examples and supporting audiovisual materials. Software Design & Implementation Design, develop, test, and debug **embedded system software**. Review and optimize code for efficiency, stability, and scalability. Analyze system resources and integrate new product designs into the system. Interface with hardware design and development teams to ensure seamless integration. Testing & Support Provide **post-production support** and assist in the debugging and troubleshooting of embedded systems. Support software **quality assurance (QA)** and optimize I/O performance for embedded systems. Third-Party Software Integration Assess and integrate **third-party and open-source software** solutions as needed for system functionality. Behavioral Competencies Component Selection: Ability to select appropriate components for embedded systems based on requirements. Communication: Strong written and verbal communication skills for documentation, team collaboration, and customer interaction. Problem Solving: Ability to work independently, troubleshoot issues, and optimize system performance. Skills and Expertise Core Programming Skills Proficient in **C, C++, and Python**. (**Must know**) Expertise in **QT and QML**. (**Must know**) Hardware Knowledge Experience with schematic design, PCB component placements, layouts, and artwork. (Good to know) Understanding of **EMC standards** and their application in hardware design. (Good to know) Microcontroller & Processor Expertise Working knowledge of **8, 16, and 32-bit microcontrollers**. (**Must know**) Experience with **32-bit and 64-bit microprocessors**, including ATOM, ARM, PIC, Atmel, etc. (**Must know**) Communication Protocols Proficient with communication protocols such as **RS232C, RS485, USB, TCP/IP, Modbus RTU/TCP, and shared memory (Redis)**. (**Must know**) POC & Testing Setup Proficient in creating **proof-of-concept (POC)** layouts and writing test code for available lab resources to validate designs. Qualifications Essential: Bachelor's degree in Mechanical Engineering, Computer Science, or related field (or equivalent). Experience: Minimum of **2 years of experience** working and developing embedded software for platforms. Proficiency in developing software and working with hardware in an embedded environment. Qualification : Bachelor's degree in Mechanical Engineering, Computer Science, or related field (or equivalent)

Position: Software/Embedded Developer Location: Bengaluru Employment Type: Full-Time Job Overview We are seeking a motivated and skilled Software/Embedded Developer to design, develop, and implement **embedded solutions** for our 3D printer systems. This role focuses on enhancing UI/UX interfaces, communication protocols, and hardware integration for embedded platforms. Key Responsibilities Embedded Development: Design and develop embedded applications using **Python and/or C++**. UI/UX: Build intuitive **UI/UX interfaces using Qt** for embedded platforms. Communication: Implement and maintain **web socket communication** for device connectivity. Functionality Enhancement: Develop and integrate **plugins** to enhance product functionality. Version Control: Use version control systems (**GitHub**) for code management and collaboration. Microcontroller Interfacing: Program and interface with **Raspberry Pi and Atmega-based microcontrollers**. Hardware Integration: Collaborate with hardware engineers to integrate software with 3D printer electronics. Testing & Optimization: Debug, test, and optimize embedded applications to ensure system reliability and performance. Code Quality: Participate in **code reviews** and provide feedback on system design and implementation. Required Qualifications & Skills Education: Bachelor s degree in Electronics, Computer Science, or a related field (**Freshers welcome**). Experience: Proven experience in embedded systems development. Core Programming: Proficiency in **Python and/or C++**. GUI Framework: Hands-on experience with **Qt framework** for GUI development. Design: Strong understanding of **UI/UX principles**. Technical Tools: Experience with **web sockets, plugin development, and version control systems (GitHub)**. Hardware Platforms: Practical knowledge of working with **Raspberry Pi and Atmega microcontrollers**. Domain Knowledge: Familiarity with **3D printing technology** is a strong advantage. Soft Skills: Excellent **problem-solving and debugging skills**; strong communication and teamwork abilities. Qualification : Bachelors degree in Electronics, Computer Science, or a related field

Position: Embedded Software Engineer Location: Bengaluru, Karnataka, India Reporting To: Project Manager Qualifications: Bachelor s Degree in Electronics & Communication, Electrical, or Computer Science Engineering 2 to 5 years of relevant experience in embedded software development and software design Proficiency in programming languages such as C, C++, C# and experience with RTOS Key Responsibilities: Collaborate with cross-functional teams to design and develop embedded software from initial requirements through to production and commercial deployment Write clean, efficient, and well-documented code aligned with specifications Troubleshoot, debug, and maintain existing embedded software systems Recommend and implement software improvements to enhance performance and reliability Develop technical documentation and reports to support software solutions Integrate software components and third-party libraries or tools as required Essential Skills & Experience: Proven experience as an Embedded Software Developer or Engineer Strong understanding of communication protocols such as Serial, Ethernet (TCP/IP, UDP), CAN, SPI, I2C, SQI, Parallel, EtherCAT, etc. Solid background in software design and development within a test-driven environment Proficient in embedded programming with C, C++ and RTOS Excellent analytical, problem-solving, and communication skills Desirable Skills: Experience working with microcontrollers Knowledge of PLC programming Ability and enthusiasm to quickly learn new programming languages and technologies Qualification : Bachelors Degree in Electronics & Communication, Electrical, or Computer Science Engineering

About the Role: As a Senior Embedded Engineer at SolarEdge India R&D, you will be a key player in developing embedded systems and firmware for our advanced solar energy products. You will be responsible for designing, implementing, and testing embedded software, ensuring its reliability, performance, and seamless integration with our hardware platforms. What You Will Be Doing: Lead the design and development of embedded systems and firmware for SolarEdge's solar power products, including inverters, power optimizers, energy storage solutions, and communication interfaces. Collaborate with cross-functional teams (hardware engineers, software developers, and product managers) to define system requirements and architect innovative embedded solutions. Develop and implement efficient and reliable embedded software in C/C++ for various microcontrollers and processors used in SolarEdge products. Conduct thorough testing and verification of embedded software to ensure its functionality, performance, and compliance with quality standards. Troubleshoot and debug embedded software and hardware interactions, identifying and resolving issues throughout the product development lifecycle. Participate in code reviews, providing constructive feedback to team members and ensuring code quality and adherence to coding standards. Stay abreast of industry trends and advancements in embedded systems to propose and integrate cutting-edge technologies into SolarEdge's products. Collaborate with manufacturing and validation teams to support the production and testing of embedded systems. Support the certification process by providing necessary documentation and technical inputs to comply with relevant safety and regulatory standards. Design and implement control algorithms for digital control of power electronics systems, such as DC/DC converters and DC/AC inverters operating at high switching frequencies. Develop device drivers and execute tight interrupt loops in bare metal implementations. Optimize firmware algorithms to enhance system efficiency and reliability. Job Requirements: Bachelor's (B.E./B.Tech.) or Master's (M.E./M.Tech.) degree in Electrical/Electronics Engineering, Computer Science, or a related field. 4+ years of experience in embedded systems design and firmware development. Proficiency in C and C++ programming, with hands-on experience in RTOS and bare-metal development. Strong understanding of microcontrollers, microprocessors, and embedded system architectures. Hands-on experience with ARM-based processors (e.g., TI DSP Controllers, ST, Renesas). Good knowledge of RTOS concepts. Ability to identify and troubleshoot hardware and software technical problems. Working knowledge of protocols and device drivers for SPI, I2C, UART, and CAN. Strong knowledge and proven experience in developing control algorithms for power electronics converters/inverters. Experience developing device drivers and executing tight interrupt loops in bare metal. Experience optimizing firmware algorithms for system efficiency and reliability. Working knowledge of JTAG/SWD debuggers. Experience in board bring-up, peripheral integration, and device driver development. Strong debugging and problem-solving skills. Knowledge of software development tools, version control systems, and debugging tools. Excellent communication and teamwork skills. Experience in the renewable energy or power electronics industry is a plus. Results-oriented mindset. Qualification : Bachelor's (B.E./B.Tech.) or masters degree (M.E./M.Tech.) in Electrical/Electronics Engineering, Computer Science, or a related field.

SolarEdge (NASDAQ: SEDG), is a global leader in high-performance smart energy technology, with over 4000 employees, offices in 34 countries, and millions of products installed in over 133 countries. Our diverse product offering comprises intelligent solar inverters, battery storage, backup systems, EV charging, and complete home energy management ecosystems. By leveraging world-class engineering capabilities and with a relentless focus on innovation, we strive to create a world where clean, green energy from the sun is the primary source of power for our homes, businesses, and just about everywhere we thrive. Our R&D division is growing globally, as a IoT/IoE Firmware Engineer, you will be a crucial member of the SolarEdge India R&D team in Bangalore, responsible for developing embedded systems and firmware for our advanced solar energy products. You will play a key role in designing, implementing, and testing embedded software, ensuring its reliability, performance, and seamless integration with our hardware platforms. Responsibilities: Design, develop, test and maintain code for modern embedded Linux based IOT devices, both in low level and system level development. Collaborate with cross-functional teams, including Embedded firmware/hardware engineers, software developers, and product managers, to define system requirements and architect innovative embedded solutions. Develop and deploy secure, scalable, and reliable IoT/IoE architectures. Interface with sensors, actuators, and microcontrollers, Collect, process, and analyze sensor data using advanced tools Develop and implement efficient and reliable embedded software in C and C++ for Embedded Linux system used in SolarEdge products" Troubleshoot and debug embedded software and hardware interactions, identifying and resolving issues throughout the product development lifecycle. Participate in code reviews, providing constructive feedback to team members and ensuring code quality and adherence to coding standards. Job Requirements Bachelor's (B.E./B.Tech.) or master s degree (M.E./M.Tech.) in Electrical/Electronics Engineering, Computer Science, or a related field. 2+ years of experience in IoT/IoE embedded systems design and firmware development. Strong programming skills in both C and C++ Experience with Python is desirable. Proven experience in building complex, high-performance systems and applications. Proficiency in using modern development tools and version control systems (e.g., Git, Docker) Experience in user space application development in Linux Ability to identify, troubleshoot hardware and software technical problems. Strong debugging and Analytical thinking, problem-solving skills Excellent communication and teamwork skills to collaborate effectively with cross-functional teams. Experience in the renewable energy or power electronics industry is an added advantage. Provide technical support and troubleshooting assistance during product development. Stay up to date with the latest advancements in power electronics and firmware technologies. Drive results within constraints of Product life cycle development and production at scale. Results-oriented mindset with a focus on achieving tangible and measurable results. SolarEdge recognizes its talented and diverse workforce as a key competitive advantage. Our business success is a reflection of the quality and skill of our people. SolarEdge is committed to seeking out and retaining the finest human talent to ensure top business growth and performance. Qualification : Bachelor's (B.E./B.Tech.) or masters degree (M.E./M.Tech.) in Electrical/Electronics Engineering, Computer Science, or a related field.

About the Role: As a Senior Embedded Firmware Engineer at SolarEdge India R&D, you will be a key player in developing embedded systems and firmware for our advanced solar energy products. You will be responsible for designing, implementing, and testing embedded software, ensuring its reliability, performance, and seamless integration with our hardware platforms. Responsibilities: Lead the design and development of embedded systems and firmware for SolarEdge's solar power products, including inverters, power optimizers, energy storage solutions, and communication interfaces. Collaborate with cross-functional teams (hardware engineers, software developers, and product managers) to define system requirements and architect innovative embedded solutions. Develop and implement efficient and reliable embedded software in C/C++ for various microcontrollers and processors used in SolarEdge products. Conduct thorough testing and verification of embedded software to ensure its functionality, performance, and compliance with quality standards. Troubleshoot and debug embedded software and hardware interactions, identifying and resolving issues throughout the product development lifecycle. Participate in code reviews, providing constructive feedback to team members and ensuring code quality and adherence to coding standards. Stay abreast of industry trends and advancements in embedded systems to propose and integrate cutting-edge technologies into SolarEdge's products. Collaborate with manufacturing and validation teams to support the production and testing of embedded systems. Support the certification process by providing necessary documentation and technical inputs to comply with relevant safety and regulatory standards. Key Responsibilities (Continued): Design and implement control algorithms for digital control of power electronics systems, such as DC/DC converters and DC/AC inverters operating at high switching frequencies. Develop device drivers and execute tight interrupt loops in bare metal implementations. Optimize firmware algorithms to enhance system efficiency and reliability. Job Requirements: Bachelor's (B.E./B.Tech.) or Master's (M.E./M.Tech.) degree in Electrical/Electronics Engineering, Computer Science, or a related field. 10+ years of experience in embedded systems design and firmware development. Proficiency in C and C++ programming, with hands-on experience in RTOS and bare-metal development. Strong understanding of microcontrollers, microprocessors, and embedded system architectures. Hands-on experience with microprocessors such as TI DSP Controllers, ST, and Renesas. Experience with advanced SW control methods such as SIL/HIL. Experience with test automation. Experience with PLECS/Typhoon HIL is desirable. Good knowledge of RTOS concepts. Ability to identify and troubleshoot hardware and software technical problems. Working knowledge of protocols and device drivers for SPI, I2C, UART, and CAN. Strong knowledge and proven experience in developing control algorithms for power electronics converters/inverters. Experience developing device drivers and executing tight interrupt loops in bare metal. Experience optimizing firmware algorithms for system efficiency and reliability. Working knowledge of JTAG/SWD debuggers. Experience in board bring-up, peripheral integration, and device driver development. Strong debugging and problem-solving skills. Knowledge of software development tools, version control systems, and debugging tools. Excellent communication and teamwork skills. Experience in the renewable energy or power electronics industry is a plus. Results-oriented mindset. About SolarEdge: SolarEdge recognizes its talented and diverse workforce as a key competitive advantage. Our business success is a reflection of the quality and skill of our people. SolarEdge is committed to seeking out and retaining the finest human talent to ensure top business growth and performance. Qualification : Bachelor's (B.E./B.Tech.) or masters degree (M.E./M.Tech.) in Electrical/Electronics Engineering, Computer Science, or a related field.

Software & Embedded Systems Engineer Location: Bangalore Department: Engineering Role Summary Fracktal Works is looking for a skilled and motivated Software & Embedded Systems Engineer to join our innovative engineering team in Bangalore. The ideal candidate has a strong foundation in software development, hands-on experience with embedded systems, and a keen interest in working with hardware platforms. Experience with 3D printers is a plus. This role will involve designing, developing, and maintaining embedded software solutions, collaborating closely with hardware teams, and contributing to cutting-edge projects in the field of additive manufacturing and automation. Key Responsibilities Design, develop, and maintain embedded software for various hardware platforms. Write clean, efficient, and optimized code in Python and C++ for embedded applications. Apply object-oriented programming (OOP) principles to develop modular and scalable codebases. Collaborate with hardware engineers to integrate, test, and debug embedded software with physical hardware. Build and experiment with Arduino, Raspberry Pi, and other microcontroller-based platforms. Diagnose and resolve software and hardware integration issues. Work within Linux environments for scripting, system management, and development tasks. Use Git, GitHub, and other version control tools for collaborative development and project tracking. Participate in code reviews, providing and incorporating constructive feedback to ensure code quality. Qualifications & Skills Bachelor s degree in Computer Science, Electronics/Electrical Engineering, Mechatronics, or a related field. Strong programming skills in Python and C++. Solid understanding of object-oriented programming (OOP) and software design principles. Experience with embedded systems development and working with hardware interfaces. Hands-on experience with Arduino, Raspberry Pi, or similar development boards. Proficiency with Linux systems (including shell scripting and system-level operations). Familiarity with version control systems (e.g., Git and GitHub). Prior experience with 3D printers either operating, building, or modifying them is an advantage. Excellent problem-solving skills, attention to detail, and a passion for hands-on development. Strong collaboration and communication skills both written and verbal. Knowledge of PCB design is a plus, but not required. At Fracktal Works, you ll join a team that is pioneering the future of manufacturing technology. You ll work on exciting projects in 3D printing and embedded systems, learn from a collaborative and highly skilled team, and make a tangible impact in an innovative, fast-paced environment. Qualification : Bachelors degree in Computer Science, Electronics/Electrical Engineering, Mechatronics, or a related field

Job Title: Principal Electronics Engineer Embedded Hardware Location: Bengaluru Experience: 8 14 years Industry: Automotive / EV / Manufacturing Employment Type: Full-time About Ultraviolette Join the Charge. Create the Future. At Ultraviolette, we are more than just a company we re a movement that s reshaping the future of electric mobility. From building India s fastest electric motorcycle to designing the world s most advanced electric scooter, we thrive on pushing the boundaries of what s possible. We are a team of engineers, designers, and trailblazers united by a passion to craft machines that are sustainable, intelligent, and exhilarating. Every bolt, every line of code, and every component is designed with a singular mission: to accelerate the global shift toward next-generation mobility. Role Overview We are looking for a Principal / Lead Electronics Engineer Embedded Hardware to take ownership of vehicle electronics architecture, embedded systems design, diagnostics, and system-level validation for our next-gen electric vehicles. In this role, you will be at the forefront of developing high-performance electronic control units, telematics, and connected systems for future-ready vehicles. You will drive architecture decisions, system integration, and compliance, working alongside cross-functional teams to bring innovation from concept to the street. Key Responsibilities 1. Vehicle Electronics Architecture Design and bring to production electronic hardware including ECUs, display clusters, and telematics modules. Develop high-speed embedded designs with RF, sensor integration, and communication interfaces (CAN, LIN, UART, SPI, I2C). Create and maintain system schematics, architecture documentation, and interface definitions. 2. Embedded Hardware Design Develop embedded platforms with high-performance microcontrollers/processors to support vision systems, graphics, radar/LiDAR, audio, and OS-based applications. Architect and validate connected systems involving GNSS, LTE, BLE, Wi-Fi. Lead the design and integration of vehicle subsystems like lighting, clusters, IMUs, and more. Collaborate closely with firmware teams on hardware-software integration, bootloaders, and OTA functionality. 3. Diagnostics & Compliance Implement UDS-based diagnostics, fault logging systems, and service tools. Ensure compliance with AIS-004, ISO 26262, and other automotive design standards. 4. Testing & Validation Define and execute component-level and vehicle-level validation test plans. Utilize tools like Vector CANoe, CANalyzer, ETAS INCA, oscilloscopes, and spectrum/network analyzers for debugging and validation. 5. Cross-functional Collaboration Partner with teams across mechanical, software, UX, powertrain, and wire harness for holistic system integration. Work with mobile and cloud teams to enable real-time data streaming, diagnostics, and OTA updates. Actively contribute in design reviews, DFMEAs, and root cause analyses of field issues. Required Qualifications & Skills B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines. 8+ years of embedded hardware design experience, preferably in 2W/EV/automotive domain. Strong understanding of embedded C and scripting languages (e.g., Python, MATLAB, Octave). Experience with circuit simulation tools (e.g., PSPICE, LTSPICE, SIMPLIS, Simetrix). Hands-on expertise in RF design, signal/power integrity, EMI/EMC compliant layouts. Proficiency in PCB design tools (e.g., OrCAD, Altium, Mentor Graphics). Demonstrated experience in designing systems with multi-core processors, memory chips, SoMs, and high-speed interfaces (USB, Ethernet, LVDS, MIPI). Deep knowledge of embedded communication protocols (CAN, LIN, SPI, UART, I2C). Strong debugging and problem-solving skills in hardware validation and field testing. Nice to Have Hands-on experience in vehicle electronics development for 2W, 4W, or electric vehicles. Familiarity with DFT/DFA (Design for Testing/Assembly) methodologies. Experience with manufacturing and compliance testing for embedded hardware. Background in developing connected vehicle ecosystems with OTA capabilities. Passionate about emerging technologies in mobility, EVs, and embedded systems. Be part of India s electric mobility revolution where engineering meets adrenaline. Work on world-class technologies that are pushing global boundaries. Join a culture that encourages innovation, learning, and ownership. Collaborate with passionate teams building next-gen mobility experiences. Qualification : B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines

Position: Junior/Senior Design Engineer Hardware Design Location: Bangalore Education: B.E./B.Tech. in Electronics & Communication / Electronics & Telecommunication M.E./M.Tech. in Electronics & Communication Experience: 2 to 4 years Job Overview We are looking for a passionate and detail-oriented Hardware Design Engineer (Junior/Senior level) to join our engineering team in Bangalore. In this role, you will be responsible for designing high-performance embedded hardware systems, from circuit design and schematic capture to board bring-up and testing. You ll work closely with cross-functional teams to deliver robust, scalable, and reliable hardware solutions, primarily for embedded and defense applications. Key Responsibilities Execute assigned hardware design tasks within defined timelines. Design and develop complex hardware circuits, schematics, and PCB layouts. Perform Signal Integrity (SI), Power Integrity (PI), and thermal analysis. Develop hardware test plans and execute board/system testing accordingly. Conduct board bring-up, validation, and debugging of hardware platforms. Participate in design reviews, defect prevention, and continuous improvement activities. Adhere to all QMS (Quality Management System) and project-specific processes. Prepare detailed technical documentation and maintain design records. Flag and resolve any technical challenges with guidance from tech leads. Technical Skill Set Strong expertise in circuit design, schematic capture, and PCB design. Hands-on experience with 16-bit or 32-bit processors/microcontrollers (e.g., ARM, PowerPC, IBM PPC 405, Intel x86). Experience with FPGA-based board designs. Good understanding of high-speed board design and signal integrity concepts. Familiarity with system interfaces: PCI, PCIe, VME, Compact PCI, ATCA/AMC is a plus. Exposure to embedded hardware design for defense applications. Understanding of qualification processes for industrial/defense-grade products. Proficiency in board bring-up and hardware debugging techniques. Technology Domains Storage Technologies: iSCSI, SATA, Fibre Channel Processors: MIPS, ARM, PowerPC Interfaces: USB, PCIe, PCI-X Memory: DDR, DDR2, RLDRAM Soft Skills & Attributes Strong verbal and written communication skills Excellent interpersonal and teamwork abilities Proactive and solution-oriented mindset Strong time management and organizational skills Opportunity to work on cutting-edge hardware design projects in embedded and defense domains Exposure to the complete hardware development lifecycle Collaborative and inclusive work culture Learning and development support Competitive compensation package Qualification : M.E./M.Tech. in Electronics & Communication

Position: Technical Lead / Project Lead Hardware Design Location: Bangalore Education: B.E./B.Tech. in Electronics & Communication or Electronics & Telecommunication M.E./M.Tech. in Electronics & Communication Experience: 5 to 8 years Job Overview We are seeking a dynamic and experienced Technical Lead / Project Lead Hardware Design to join our engineering team in Bangalore. In this leadership role, you will guide a team of hardware engineers through the end-to-end design and development of advanced embedded and FPGA-based systems primarily for defense and industrial applications. You'll be responsible for ensuring high-quality, defect-free, and timely project deliveries while driving technical excellence and process adherence. Key Responsibilities Technical Leadership Lead hardware design projects from specification to delivery, ensuring robust and scalable solutions. Provide technical guidance to team members in circuit design, schematic development, and board-level design. Finalize board specifications based on customer requirements and prepare detailed technical documentation. Review hardware modules and ensure compliance with design best practices and industry standards. Lead Signal Integrity (SI), Power Integrity (PI), and thermal analysis during design and validation phases. Project Management Plan, monitor, and track project schedules, resource allocation, and delivery milestones. Coordinate with the Project Manager and cross-functional teams to ensure alignment and timely progress. Conduct internal project meetings, present status updates, and recommend process or technical improvements. Ensure adherence to QMS guidelines, project processes, and quality goals. Team Development & Support Mentor junior engineers and support individual learning and development plans. Manage a small team, resolve technical and interpersonal challenges, and promote a collaborative work environment. Assist in performance reviews and team development initiatives. Quality & Process Improvement Drive defect prevention initiatives and participate in continuous improvement of design processes. Coordinate configuration management and quality control activities throughout the project lifecycle. Technical Skill Set Strong hands-on experience in FPGA-based board design and embedded hardware development. Expertise in system-level architecture, processor interfaces, DDR memory design, serial bus protocols, and networking. Proficient in board bring-up and debugging at system level. Experience with embedded hardware design for defense applications and understanding of qualification processes. Tools: Schematic capture/layout: OrCAD, Allegro Signal integrity tools for SI/PI analysis Soft Skills Excellent verbal and written communication skills Strong people management and leadership capabilities Effective time management, organization, and planning Proven ability to manage small teams and drive project success Familiarity with quality systems and engineering best practices Opportunity to work on cutting-edge, high-impact hardware projects Collaborative and technically strong work environment Competitive compensation and benefits package Focus on leadership development and continuous learning Dynamic and inclusive workplace culture Qualification : M.E./M.Tech. in Electronics & Communication

Position: Lead Design Engineer Location: Bangalore Education: B.E./B.Tech. in Computer Science or Electronics & Communication M.E./M.Tech. in Computer Science or Electronics & Communication Experience: 5 to 9 years Job Overview We are looking for a skilled and motivated Lead Design Engineer to join our embedded systems team in Bangalore. In this role, you will take ownership of designing and developing high-performance device drivers and embedded Linux applications for ARM and/or TI DSP platforms. You will play a critical role in end-to-end development from architecture and coding to testing and debugging while also supporting customer requirements and contributing to technical discussions. This role requires strong expertise in embedded Linux development, device drivers, and excellent problem-solving abilities. Key Responsibilities Design, develop, and optimize device drivers and protocol stacks for embedded Linux on ARM and/or TI DSPs. Perform kernel-level development, debugging, and performance tuning. Analyze and resolve issues reported in existing designs; provide timely support and fixes. Work on application and middleware development for embedded systems. Participate in architecture discussions, define module-level details, and write clean, efficient code. Conduct peer reviews and follow best practices in design, coding, and testing. Develop and maintain comprehensive design documents, user manuals, and test reports. Perform performance and dependency analysis of embedded components. Engage with customers in discussions, conference calls, and technical clarifications. Collaborate with technical leads and team members to ensure timely project delivery. Required Skills & Experience Strong hands-on experience in device driver development for embedded Linux on ARM and/or TI DSPs. Successfully delivered at least two embedded projects involving driver or kernel development. Solid understanding of operating system concepts, C/C++, data structures, and multithreading. Experience with Linux framework development, preferably on TI DSPs. Proficient in debugging and performance optimization in embedded environments. Knowledge of IPC mechanisms, task/thread management, and handling deadlocks. Experience working in a collaborative environment with code reviews and version control. Preferred (Nice-to-Have) Skills Familiarity with audio-video streaming technologies and codecs such as MPEG2/H.264. Understanding of high-speed interfaces like PCIe with DMA. Basic knowledge of networking protocols, especially TCP/IP stack. Soft Skills & Attributes Strong analytical and debugging skills Effective communicator, capable of working with cross-functional teams and clients Self-driven with a proactive mindset Strong organizational and documentation skills Ability to handle multiple priorities and deliver under tight deadlines Opportunity to work on cutting-edge embedded systems and real-time applications Collaborative and technically rich work environment Competitive compensation package Continuous learning and growth opportunities Exposure to high-performance embedded development in mission-critical domains Qualification : M.E./M.Tech. in Computer Science or Electronics & Communication

Position: Application Engineer, Analog & Power Job Overview: We are seeking an Application Engineer specializing in Analog & Power to join our team. In this role, you will provide advanced engineering design services and support to the regional engineering team, with a focus on power electronics and analog engineering solutions. You will be responsible for hardware engineering support, including PCB design and review, electronic simulations, and laboratory analysis, all while ensuring compliance with industry standards and customer specifications. Key Responsibilities: Provide advanced engineering design and support for power electronics and analog systems, assisting the regional engineering team. Conduct hardware engineering tasks, including PCB reviews, electronic simulations, and using lab equipment such as PCBA rework tools and oscilloscopes for product development. Lead PCB design from initial concept (block diagrams) to part selection, schematics, layout, Gerber files, and prototype testing. Develop clear and concise technical documentation, such as whitepapers, technical reports, and internal training materials. Support the development and validation of reference designs to meet customer specifications. Ensure that all designs comply with relevant industry standards and customer specifications. Attend technical and sales training to stay up to date with current technologies and trends. Maintain accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field. At least 7 years of experience in electronics/semiconductors, power management, and analog product design. Strong technical expertise in power conversion topologies (DC-DC, AC-DC, DC-AC). Experience working with WBG (Wide Bandgap) devices such as SiC and GaN. Solid experience with electrical instrumentation, including Op-Amps, signal conditioning, sensors, and data acquisition systems. Familiarity with industry standards and compliance (e.g., IEC, UL, ISO) for high-power systems. In-depth understanding of EMI/EMC standards and mitigation techniques for high-power designs. Experience in reference design development, validation, and component optimization. Strong communication and interpersonal skills to collaborate effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Access to training and professional development opportunities. Performance coaching and growth support. The chance to work with a fun and supportive team. Opportunity to be part of a growing and strong company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field.

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Job Summary: (Sr. Lead Engineer) Qualcomm Simulation platform team would be responsible for defining/prototyping/developing software s on the emulation platforms. Looking for an experienced BSP engineer for virtual platform, who can help us is developing virtual prototype software solution for snapdragon automotive products. Candidate must have an excellent understanding of the complex SoCs architecture & its Software stack. Education & Experience: Bachelor s/master s degree in computer science, electronics engineering, or relevant domain with 6~8 years relevant industry experience. Primary Responsibility: Software (BSP) Bring-up on Virtual Platforms. Understand the emulation platform SoC architecture and develop single software solution. Ability to collaborate with cross functional teams and deliver the quality product under strict timeline. Define & develop custom virtio architectures. Pre-silicon software development platform prototype development Develop solution to improve performance of software running on Virtual platform. Supporting internal & external customers on Bring up & debugging from Software & emulation side. Mandatory Skills: Knowledge in Linux/QNX BSPs & Full Boot Chain. Strong System level programming skills in C/C++. Python, Rust is a plus. Excellent knowledge of OS fundamentals, Data structures, Linux kernel and its device driver model Strong debugging, analytical and problem-solving skills. Should have knowledge on debuggers like T32,gdb, etc., Strong collaboration skills with the ability to collaborate with multiple functional teams. Able to understand and debug large complex SW. Fair understanding of CPU (ARM), subsystems, SOC architecture and its SW-layers Fair understanding of the Virtual Machines with Type1 and Type2 Hypervisors Added Advantage: Fair understanding of QEMU/KVM platforms. Fair understanding of multimedia systems (GPU/Display/CAM/VPU/etc.,) knowledge. Fair knowledge of hardware-software interface and SystemC ASPICE and ISO26262 know how is preferred. Automotive experience is preferred. Qualification : Bachelors/masters degree in computer science, electronics engineering, or relevant domain with 6~8 years relevant industry experience.

Job Title: Staff Engineer Embedded Software & Methodologies Job Overview: The Architecture and Technology Group (ATG) at Arm plays a critical role in shaping the future of Arm s architecture roadmap. ATG develops industry-leading secure CPU and system architectures, along with technologies that empower our global ecosystem to build innovative products. As part of this, ATG also creates Architecture Compliance Kits (ACK) a crucial product that ensures CPU implementations adhere to Arm architecture standards. These kits are utilized by both internal and external CPU design teams to validate compliance. The ATG team in Bangalore focuses on developing these ACK products. The Methodology Team, specifically, builds embedded software, methodologies, and tools for the latest Arm cores and system IPs. As a Staff Engineer, you will provide technical leadership and guide junior engineers while actively contributing to product development. You will leverage your software engineering expertise to build scalable, high-quality compliance kits used across Arm s internal teams and external partners. Key Responsibilities: Act as a technical expert, driving the design and development of embedded software, boot flows, and methodologies for architectural compliance. Analyze architecture specifications and define software methodologies that meet industry standards. Provide technical direction to the team while mentoring and guiding junior engineers. Collaborate with cross-functional teams to ensure successful and timely delivery of engineering commitments. Continuously enhance development efficiency through improved methodologies, automation, and process enhancements. Communicate delivery status, technical risks, and mitigation plans effectively to stakeholders. Required Skills & Experience: Bachelor s or Master s degree (or equivalent) in Computer Engineering, Computer Science, or Electronics Engineering. 10+ years of experience in embedded software development, boot flows, firmware development, driver development, or low-level operating system driver development for processors. Strong understanding of software engineering principles, along with excellent analytical, problem-solving, and debugging skills. Strong communication skills both verbal and written with the ability to convey technical information effectively across teams. Self-driven, proactive, and able to take ownership of tasks and responsibilities. Preferred Skills: Familiarity with computer architecture fundamentals, especially Arm or x86 architecture. Proficiency in at least one programming language (C or C++) and one scripting language (Perl or Python). Experience with assembly-level programming. Working knowledge of software verification methodologies, embedded software environments, and toolchains (with preference for GNU toolchains). Join a team that thrives on technical excellence and innovation. Whether it s defining cutting-edge architectures, developing advanced cores, or creating custom physical IPs, Arm offers you a platform to push boundaries and make a lasting impact. Qualification : Bachelors or Masters degree (or equivalent) in Computer Engineering, Computer Science, or Electronics Engineering.

Job Overview Qualcomm is a leading technology innovator, pushing the boundaries of what's possible to enable next-generation experiences and drive digital transformation. As a Hardware Engineer at Qualcomm, you will be responsible for planning, designing, optimizing, verifying, and testing electronic systems, circuits, mechanical systems, and various systems like Digital/Analog/RF/optical systems, FPGA, and DSP systems. You will collaborate with cross-functional teams to develop world-class products that meet performance requirements. Key Responsibilities Front-End Implementation: Develop and implement MSIP designs, including Temp/Voltage/Security Sensors and Controllers. RTL Development: Design, validate, and ensure the proper functioning of RTL for linting, clock-domain crossing, conformal low power, and DFT (Design for Test) rules. Verification: Work with the functional verification team to create test plans, debug issues, and ensure that all designs meet the required specifications. Timing Constraints: Develop timing constraints, deliver synthesized netlists to the physical design team, and provide support for Physical Design STA (Static Timing Analysis). Low Power Checks: Write UPF (Unified Power Format), perform power-aware equivalence checks, and ensure compliance with low-power design standards. DFT Insertion & Analysis: Perform DFT insertion and ATPG (Automatic Test Pattern Generation) analysis for optimal SAF (Scan Acceptance Fault) and TDF (Transition Delay Fault) coverage. SoC Integration Support: Provide support for SoC integration and pre/post-silicon debugging at the chip level. Minimum Qualifications Education: Bachelor s degree in Computer Science, Electrical/Electronics Engineering, or a related field with 3+ years of relevant experience, or Master s degree in Computer Science, Electrical/Electronics Engineering, or a related field with 2+ years of relevant experience, or PhD in Computer Science, Electrical/Electronics Engineering, or a related field. Skills & Experience Educational Background: MTech/BTech in EE/CS with 3+ years of hardware engineering experience. Technical Experience: Expertise in micro-architecture development, RTL design, front-end flows (Lint, CDC, low-power checks, etc.), synthesis/DFT/FV/STA. Experience with post-silicon bring-up and debugging is a plus. Collaboration: Ability to work effectively with teams across the globe and possess strong communication skills. Qualification : MTech/BTech in EE/CS with 3+ years of hardware engineering experience.

Engineer will be working on Embedded Firmware which involves feature development, integration, and bug fixing and maintenance. Experience in embedded architecture, external interfaces, product constraints, along with ability to develop architectures/features that meet these constraints while providing new value for the platform. Strong Experience in C\C++ Strong Experience in embedded Systems Strong Experience in RTOS System level design Experience in low level programming in ARM or ARC architecture Experience in debugging Embedded system software with Innovative techniques Experience in capturing and debugging based on HW Signals. Experience in Requirement understanding and designing solution with good presentation skills.Add-on:- Experience in USB Protocol- Experience in PCI System flows- Experience in Bluetooth Controller / Host protocols( BR\EDR) and Bluetooth Low Energy- Exposure to Python scripting.- Agile and scrum practices Qualifications Bachelor's or Master s degree in computer science, Electronics and communication Engineering or a related field with 4 years of experience. Proven experience in Embedded system software / Firmware development in RTOS environment with strong system knowledge in understanding the requirements and making the design, development and deployment in embedded products. Solid understanding of software development life cycle (SDLC) and Agile methodologies. Excellent problem-solving skills and attention to detail. Strong written and verbal communication skills. Experience in maintaining and managing codebases, ensuring high standards of code quality. Inside this Business Group The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth. Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Qualification : Bachelor's or Masters degree in computer science, Electronics and communication Engineering or a related field with 4 years of experience.

Technical Requirements: 1. Programming Experience: Proficient in C/C++ (Embedded C, Assembly programming is a plus). Experience in writing low-level firmware and drivers in C and assembly language. 2. Driver Development & Integration: Experience in driver development and integration for various protocols including: SPI, I2C, UART, DMA, CAN, PCIe, Ethernet, USB, SCSI/iSCSI. Expertise in integrating drivers for different hardware components. 3. Board-Level Development: Experience in NVMe and DDR board-level interfaces development. Working experience with board support packages (BSP) and reference platforms. 4. Bootloader Development: Proficient in developing and integrating bootloaders (PSBL, SBL). Familiarity with bare-metal driver development for various platforms. 5. HW Bring-up & Firmware Validation: Experience in hardware bring-up for ARM and x86-based platforms. Firmware design and validation, ensuring reliability and performance at the firmware level. 6. Microcontroller Programming: Hands-on experience in microcontroller programming using Assembly, C, and/or Python. Expectations from the Role: 1. Learning & Technology Adaptability: Strong ability and eagerness to learn new concepts and technologies. Openness to apply new learning to solve technical challenges. 2. Independent Work: Ability to work independently and take ownership of assigned tasks. Ensure tasks are completed on schedule and meet committed quality. 3. Ownership & Responsibility: Ownership of tasks, ensuring completion within agreed timelines and at the expected quality level. Take responsibility for the overall success of the projects. 4. Team Collaboration: Ability to collaborate effectively with team members to accomplish tasks. Work as a team player, communicating clearly and helping others as needed. 5. Experience with Development Tools: Familiarity with development, debugging, testing, and build tools. Proficiency in using IDE and debugging tools specific to embedded development.

Job Summary: Embedded Developer (Rust, Android, Embedded C) Location: Pune & Bangalore Experience: 5-10 years Skills Required: Rust, Embedded Development, Android, Embedded C Preferred Skills: SQA Knowledge, Agile, ASPICE Position Overview: We are seeking an experienced Embedded Developer proficient in Rust, Android development, and Embedded C to join our team. This role is ideal for someone with 5-10 years of experience in the embedded systems domain who is passionate about developing high-quality, scalable solutions for cutting-edge technologies. As an Embedded Developer, you will work on designing, developing, and optimizing embedded systems, particularly with Rust and Android-based platforms, while applying best practices in software quality assurance (SQA) and Agile methodologies. Key Responsibilities: Embedded Development: Design, develop, and implement embedded systems solutions using Rust and Embedded C. Ensure that solutions meet project requirements and quality standards. Android Integration: Develop and optimize Android-based applications that interface with embedded systems, ensuring seamless communication between hardware and software. Quality Assurance (SQA): Apply SQA principles to ensure the software meets the highest standards of quality and performance. Conduct rigorous testing to validate system functionality. Collaboration & Agile Methodology: Work collaboratively within an Agile framework with cross-functional teams, including hardware engineers, software engineers, and product managers, to deliver features in sprints. ASPICE Compliance: If applicable, follow ASPICE guidelines to ensure that the development process adheres to industry standards and best practices. Essential Skills: Rust Programming: Extensive experience with Rust, particularly in embedded environments. Embedded Systems Development: Proficient in Embedded C and hands-on experience with microcontrollers, system-on-chips (SoCs), and real-time operating systems (RTOS). Android Development: Strong experience with Android development, particularly in integrating embedded systems with Android apps or services. Preferred Skills: SQA Knowledge: Familiarity with Software Quality Assurance (SQA) practices and tools for testing embedded systems. Agile Methodology: Experience working in Agile teams and familiarity with Agile project management tools. ASPICE: Knowledge of Automotive SPICE (ASPICE) or similar standards in the context of embedded systems development. Work Location: Pune, Maharashtra Bangalore, Karnataka

Software Engineer Power/Thermal Software Products Team Company Qualcomm India Private Limited Job Area Engineering Group > Software Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drive digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world-class products that meet and exceed customer needs. You will collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master s degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Languages such as C, C++, Java, Python, etc. Job Description Job Overview: The Power/Thermal Software Products Team at Qualcomm focuses on delivering industry-leading power, thermal, and limit software management solutions across Qualcomm s Mobile, Automotive, Compute, IoT, and AR/VR chipsets. In this role, you will work with cross-functional teams to: Identify power optimization and performance tuning opportunities. Perform thermal/limits hardware tuning, characterization, and risk assessment. Develop optimized solutions and mitigation strategies. Conduct system-level analysis of power/thermal use cases. Collaborate with Architecture, Hardware Design, Performance, Power/Thermal Systems, and various Software teams to create optimal system-level power/thermal software solutions. Develop tools and methodologies for competitive analysis to understand competitors strengths and weaknesses. Design and implement thermal mitigation schemes that are best in the industry. Preferred Qualifications 3+ years of experience with Programming Languages such as C, C++, Java, Python, etc. Strong systems/hardware background with a solid understanding of microprocessor architecture and common SoC hardware blocks (interconnects, display, graphics, etc.). Good understanding of operating system concepts including scheduling, memory management, process management, interrupt handling, and device drivers. Experience using debug tools such as JTAG debuggers, oscilloscopes, and logic analyzers. Experience developing power/thermal management software. In-depth knowledge of embedded systems, microcontrollers, SoC power, modems, multimedia, wireless communications, and system-level debugging/analysis for SoC power optimization. Equal Opportunity Employer Statement Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, Qualcomm is committed to providing an accessible process. You may email disability-accommodations@qualcomm.com or call Qualcomm s toll-free number found on their website. Upon request, reasonable accommodations will be provided to support individuals with disabilities during the hiring process. Qualcomm is also committed to ensuring its workplace is accessible to individuals with disabilities. (Please note that this email address is exclusively for accommodation requests. Qualcomm will not respond to requests for application status updates or resume inquiries via this email.) Recruitment Policy Qualcomm s Careers Site is only for individuals seeking employment directly with Qualcomm. Staffing and recruiting agencies, as well as candidates represented by agencies, are not authorized to use this site to submit profiles, applications, or resumes. Any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies and is not responsible for any associated fees. Compliance Notice Qualcomm employees are expected to comply with all applicable policies and procedures, including but not limited to security requirements and protection of company confidential and proprietary information, in line with applicable laws. Qualification : Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience.

Job/Position Summary We are hiring for Adaptive AUTOSAR Subject Matter Expert Job Location Pune & Bangalore Experience 10+ Yrs Skills Required Proficient in C, C++ and Python programming languages. Experience in AUTOSAR Architecture Expertise in Linux, Azure DevOps, Cybersecurity, Docs-as-code, Git. Expertise in TPM - Trusted Platform Module and secure coding practices. Knowledge in ASPICE process, automation, microcontrollers. Work experience in Automotive domain industry is mandatory. Hands on experience on Communication protocol like CAN, LIN or Ethernet. Able to Mentor & Coach Junior Engineers. Requirement ESSENTIAL SKILLS /COMPETENCIES C++ Adaptive AUTOSAR CAN/LIN/Ethernet SIL Virtualization PREFFERED SKILLS /COMPETENCIES QEMU