Job Title: Principal Electronics Engineer Embedded Hardware Location: Bengaluru Experience: 8 14 years Industry: Automotive / EV / Manufacturing Employment Type: Full-time About Ultraviolette Join the Charge. Create the Future. At Ultraviolette, we are more than just a company we re a movement that s reshaping the future of electric mobility. From building India s fastest electric motorcycle to designing the world s most advanced electric scooter, we thrive on pushing the boundaries of what s possible. We are a team of engineers, designers, and trailblazers united by a passion to craft machines that are sustainable, intelligent, and exhilarating. Every bolt, every line of code, and every component is designed with a singular mission: to accelerate the global shift toward next-generation mobility. Role Overview We are looking for a Principal / Lead Electronics Engineer Embedded Hardware to take ownership of vehicle electronics architecture, embedded systems design, diagnostics, and system-level validation for our next-gen electric vehicles. In this role, you will be at the forefront of developing high-performance electronic control units, telematics, and connected systems for future-ready vehicles. You will drive architecture decisions, system integration, and compliance, working alongside cross-functional teams to bring innovation from concept to the street. Key Responsibilities 1. Vehicle Electronics Architecture Design and bring to production electronic hardware including ECUs, display clusters, and telematics modules. Develop high-speed embedded designs with RF, sensor integration, and communication interfaces (CAN, LIN, UART, SPI, I2C). Create and maintain system schematics, architecture documentation, and interface definitions. 2. Embedded Hardware Design Develop embedded platforms with high-performance microcontrollers/processors to support vision systems, graphics, radar/LiDAR, audio, and OS-based applications. Architect and validate connected systems involving GNSS, LTE, BLE, Wi-Fi. Lead the design and integration of vehicle subsystems like lighting, clusters, IMUs, and more. Collaborate closely with firmware teams on hardware-software integration, bootloaders, and OTA functionality. 3. Diagnostics & Compliance Implement UDS-based diagnostics, fault logging systems, and service tools. Ensure compliance with AIS-004, ISO 26262, and other automotive design standards. 4. Testing & Validation Define and execute component-level and vehicle-level validation test plans. Utilize tools like Vector CANoe, CANalyzer, ETAS INCA, oscilloscopes, and spectrum/network analyzers for debugging and validation. 5. Cross-functional Collaboration Partner with teams across mechanical, software, UX, powertrain, and wire harness for holistic system integration. Work with mobile and cloud teams to enable real-time data streaming, diagnostics, and OTA updates. Actively contribute in design reviews, DFMEAs, and root cause analyses of field issues. Required Qualifications & Skills B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines. 8+ years of embedded hardware design experience, preferably in 2W/EV/automotive domain. Strong understanding of embedded C and scripting languages (e.g., Python, MATLAB, Octave). Experience with circuit simulation tools (e.g., PSPICE, LTSPICE, SIMPLIS, Simetrix). Hands-on expertise in RF design, signal/power integrity, EMI/EMC compliant layouts. Proficiency in PCB design tools (e.g., OrCAD, Altium, Mentor Graphics). Demonstrated experience in designing systems with multi-core processors, memory chips, SoMs, and high-speed interfaces (USB, Ethernet, LVDS, MIPI). Deep knowledge of embedded communication protocols (CAN, LIN, SPI, UART, I2C). Strong debugging and problem-solving skills in hardware validation and field testing. Nice to Have Hands-on experience in vehicle electronics development for 2W, 4W, or electric vehicles. Familiarity with DFT/DFA (Design for Testing/Assembly) methodologies. Experience with manufacturing and compliance testing for embedded hardware. Background in developing connected vehicle ecosystems with OTA capabilities. Passionate about emerging technologies in mobility, EVs, and embedded systems. Be part of India s electric mobility revolution where engineering meets adrenaline. Work on world-class technologies that are pushing global boundaries. Join a culture that encourages innovation, learning, and ownership. Collaborate with passionate teams building next-gen mobility experiences. Qualification : B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines

Job Title: Industrialization Engineer Location: Bengaluru, India Experience Required: 5 10 years Industry: Electronics / Electric Vehicles Employment Type: Full-time Company: Ultraviolette Automotive Pvt Ltd Join the Charge. Create the Future. At Ultraviolette, we are redefining mobility. From building India s fastest electric motorcycle to developing the world s most advanced electric scooter, we thrive on innovation, bold thinking, and performance that thrills. We're a diverse, passionate team of engineers, designers, and creators united by one mission: to build machines that are not only sustainable, but exhilarating. If you re driven by purpose and ready to shape the future of mobility, this is your moment. Role Overview: We are looking for a technically strong and hands-on Industrialization Engineer (Electronics) to lead the transition from R&D prototypes to scalable, high-quality mass production. In this cross-functional role, you will work at the intersection of design, manufacturing, sourcing, and embedded systems, ensuring our products are built for scale, reliability, and performance without compromising innovation. Key Responsibilities: Technical Ownership & Industrialization: Lead industrialization from EVT (Engineering Validation Test) to DVT (Design Validation Test) and PVT (Production Validation Test), up to mass production. Translate R&D designs into production-ready documentation (BOMs, Gerbers, PCBA specs, test jigs, etc.). Conduct Design for Manufacturability (DFM) and Design for Testability (DFT) reviews. Own ramp-up metrics such as yield, test coverage, defect trends, and field return analysis. Collaborate with R&D teams on thermal design, layout optimization, and component derating strategies. Ensure compliance with voltage isolation, creepage/clearance, and relevant safety standards. Supplier & EMS Collaboration: Act as a technical bridge between internal teams and EMS vendors, ensuring alignment from design to execution. Coordinate with EMS on NPI builds, process validation, line setup, and FAI (First Article Inspection). Support firmware flashing, version control, and hardware-software integration testing at production lines. Assist in troubleshooting mechanical, electrical, or firmware-related issues during production. Component Engineering & Cost Optimization: Evaluate and qualify alternate components and suppliers. Drive cost engineering and BOM optimization without compromising on quality. Engage in component lifecycle management and ensure availability through the production lifecycle. Required Qualifications & Skills: B.E./B.Tech in Electronics, Electrical, or related field 5 10 years experience in hardware industrialization, preferably in EV or electronics manufacturing Strong knowledge of PCB design reviews, SMT/PCBA processes, and box build Hands-on with tools like Altium, OrCAD, or similar for PCB-level evaluations Experience with ICT/FCT test setups, test fixture design, and test station validation Basic embedded systems understanding firmware flashing, serial log analysis, GPIO testing Experience working directly with EMS vendors, test labs, and component suppliers Excellent cross-functional communication skills Willing to travel to EMS or supplier sites for builds and validation Nice to Have (Preferred): Familiarity with FMEA, APQP, PPAP, ISO/IATF 16949 processes Knowledge of compliance and safety standards (e.g., IEC, ISO 26262) Background in value engineering, cost-down programs, and process audits Work on industry-defining EV products with world-class engineering challenges Collaborate with cutting-edge R&D and manufacturing teams Be part of a mission-led company that s changing the landscape of mobility A workplace culture that values ownership, audacity, and excellence Apply now and be a part of something bigger. Let s create the future together. Qualification : B.E./B.Tech in Electronics, Electrical, or related field

Position: Junior/Senior Design Engineer Hardware Design Location: Bangalore Education: B.E./B.Tech. in Electronics & Communication / Electronics & Telecommunication M.E./M.Tech. in Electronics & Communication Experience: 2 to 4 years Job Overview We are looking for a passionate and detail-oriented Hardware Design Engineer (Junior/Senior level) to join our engineering team in Bangalore. In this role, you will be responsible for designing high-performance embedded hardware systems, from circuit design and schematic capture to board bring-up and testing. You ll work closely with cross-functional teams to deliver robust, scalable, and reliable hardware solutions, primarily for embedded and defense applications. Key Responsibilities Execute assigned hardware design tasks within defined timelines. Design and develop complex hardware circuits, schematics, and PCB layouts. Perform Signal Integrity (SI), Power Integrity (PI), and thermal analysis. Develop hardware test plans and execute board/system testing accordingly. Conduct board bring-up, validation, and debugging of hardware platforms. Participate in design reviews, defect prevention, and continuous improvement activities. Adhere to all QMS (Quality Management System) and project-specific processes. Prepare detailed technical documentation and maintain design records. Flag and resolve any technical challenges with guidance from tech leads. Technical Skill Set Strong expertise in circuit design, schematic capture, and PCB design. Hands-on experience with 16-bit or 32-bit processors/microcontrollers (e.g., ARM, PowerPC, IBM PPC 405, Intel x86). Experience with FPGA-based board designs. Good understanding of high-speed board design and signal integrity concepts. Familiarity with system interfaces: PCI, PCIe, VME, Compact PCI, ATCA/AMC is a plus. Exposure to embedded hardware design for defense applications. Understanding of qualification processes for industrial/defense-grade products. Proficiency in board bring-up and hardware debugging techniques. Technology Domains Storage Technologies: iSCSI, SATA, Fibre Channel Processors: MIPS, ARM, PowerPC Interfaces: USB, PCIe, PCI-X Memory: DDR, DDR2, RLDRAM Soft Skills & Attributes Strong verbal and written communication skills Excellent interpersonal and teamwork abilities Proactive and solution-oriented mindset Strong time management and organizational skills Opportunity to work on cutting-edge hardware design projects in embedded and defense domains Exposure to the complete hardware development lifecycle Collaborative and inclusive work culture Learning and development support Competitive compensation package Qualification : M.E./M.Tech. in Electronics & Communication

Position: Technical Lead / Project Lead Hardware Design Location: Bangalore Education: B.E./B.Tech. in Electronics & Communication or Electronics & Telecommunication M.E./M.Tech. in Electronics & Communication Experience: 5 to 8 years Job Overview We are seeking a dynamic and experienced Technical Lead / Project Lead Hardware Design to join our engineering team in Bangalore. In this leadership role, you will guide a team of hardware engineers through the end-to-end design and development of advanced embedded and FPGA-based systems primarily for defense and industrial applications. You'll be responsible for ensuring high-quality, defect-free, and timely project deliveries while driving technical excellence and process adherence. Key Responsibilities Technical Leadership Lead hardware design projects from specification to delivery, ensuring robust and scalable solutions. Provide technical guidance to team members in circuit design, schematic development, and board-level design. Finalize board specifications based on customer requirements and prepare detailed technical documentation. Review hardware modules and ensure compliance with design best practices and industry standards. Lead Signal Integrity (SI), Power Integrity (PI), and thermal analysis during design and validation phases. Project Management Plan, monitor, and track project schedules, resource allocation, and delivery milestones. Coordinate with the Project Manager and cross-functional teams to ensure alignment and timely progress. Conduct internal project meetings, present status updates, and recommend process or technical improvements. Ensure adherence to QMS guidelines, project processes, and quality goals. Team Development & Support Mentor junior engineers and support individual learning and development plans. Manage a small team, resolve technical and interpersonal challenges, and promote a collaborative work environment. Assist in performance reviews and team development initiatives. Quality & Process Improvement Drive defect prevention initiatives and participate in continuous improvement of design processes. Coordinate configuration management and quality control activities throughout the project lifecycle. Technical Skill Set Strong hands-on experience in FPGA-based board design and embedded hardware development. Expertise in system-level architecture, processor interfaces, DDR memory design, serial bus protocols, and networking. Proficient in board bring-up and debugging at system level. Experience with embedded hardware design for defense applications and understanding of qualification processes. Tools: Schematic capture/layout: OrCAD, Allegro Signal integrity tools for SI/PI analysis Soft Skills Excellent verbal and written communication skills Strong people management and leadership capabilities Effective time management, organization, and planning Proven ability to manage small teams and drive project success Familiarity with quality systems and engineering best practices Opportunity to work on cutting-edge, high-impact hardware projects Collaborative and technically strong work environment Competitive compensation and benefits package Focus on leadership development and continuous learning Dynamic and inclusive workplace culture Qualification : M.E./M.Tech. in Electronics & Communication

Position: Software/Embedded Developer Location: Bengaluru Employment Type: Full-Time Job Overview We are seeking a motivated and skilled Software/Embedded Developer to design, develop, and implement **embedded solutions** for our 3D printer systems. This role focuses on enhancing UI/UX interfaces, communication protocols, and hardware integration for embedded platforms. Key Responsibilities Embedded Development: Design and develop embedded applications using **Python and/or C++**. UI/UX: Build intuitive **UI/UX interfaces using Qt** for embedded platforms. Communication: Implement and maintain **web socket communication** for device connectivity. Functionality Enhancement: Develop and integrate **plugins** to enhance product functionality. Version Control: Use version control systems (**GitHub**) for code management and collaboration. Microcontroller Interfacing: Program and interface with **Raspberry Pi and Atmega-based microcontrollers**. Hardware Integration: Collaborate with hardware engineers to integrate software with 3D printer electronics. Testing & Optimization: Debug, test, and optimize embedded applications to ensure system reliability and performance. Code Quality: Participate in **code reviews** and provide feedback on system design and implementation. Required Qualifications & Skills Education: Bachelor s degree in Electronics, Computer Science, or a related field (**Freshers welcome**). Experience: Proven experience in embedded systems development. Core Programming: Proficiency in **Python and/or C++**. GUI Framework: Hands-on experience with **Qt framework** for GUI development. Design: Strong understanding of **UI/UX principles**. Technical Tools: Experience with **web sockets, plugin development, and version control systems (GitHub)**. Hardware Platforms: Practical knowledge of working with **Raspberry Pi and Atmega microcontrollers**. Domain Knowledge: Familiarity with **3D printing technology** is a strong advantage. Soft Skills: Excellent **problem-solving and debugging skills**; strong communication and teamwork abilities. Qualification : Bachelors degree in Electronics, Computer Science, or a related field

Position: Application Engineer, Analog & Power Job Overview: We are seeking an Application Engineer specializing in Analog & Power to join our team. In this role, you will provide advanced engineering design services and support to the regional engineering team, with a focus on power electronics and analog engineering solutions. You will be responsible for hardware engineering support, including PCB design and review, electronic simulations, and laboratory analysis, all while ensuring compliance with industry standards and customer specifications. Key Responsibilities: Provide advanced engineering design and support for power electronics and analog systems, assisting the regional engineering team. Conduct hardware engineering tasks, including PCB reviews, electronic simulations, and using lab equipment such as PCBA rework tools and oscilloscopes for product development. Lead PCB design from initial concept (block diagrams) to part selection, schematics, layout, Gerber files, and prototype testing. Develop clear and concise technical documentation, such as whitepapers, technical reports, and internal training materials. Support the development and validation of reference designs to meet customer specifications. Ensure that all designs comply with relevant industry standards and customer specifications. Attend technical and sales training to stay up to date with current technologies and trends. Maintain accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field. At least 7 years of experience in electronics/semiconductors, power management, and analog product design. Strong technical expertise in power conversion topologies (DC-DC, AC-DC, DC-AC). Experience working with WBG (Wide Bandgap) devices such as SiC and GaN. Solid experience with electrical instrumentation, including Op-Amps, signal conditioning, sensors, and data acquisition systems. Familiarity with industry standards and compliance (e.g., IEC, UL, ISO) for high-power systems. In-depth understanding of EMI/EMC standards and mitigation techniques for high-power designs. Experience in reference design development, validation, and component optimization. Strong communication and interpersonal skills to collaborate effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Access to training and professional development opportunities. Performance coaching and growth support. The chance to work with a fun and supportive team. Opportunity to be part of a growing and strong company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field.

Principal Systems Development Engineer Thermal Controls Location: Bengaluru, India Team: Systems Development Engineering Company: Dell Technologies Role Overview As a Principal Systems Development Engineer specializing in Thermal Controls, you ll lead the design and validation of advanced cooling algorithms for Dell s server products, especially those geared towards AI, HPC, and enterprise applications. Your role bridges hardware, firmware, and software to deliver efficient, reliable thermal management systems and uncover innovation opportunities. Key Responsibilities Design, document, implement, and validate thermal control algorithms in collaboration with Dell s global systems management software and thermal teams. Debug and validate thermal control features on live server hardware. Set up and operate servers with varying configurations to test thermal control functionality. Diagnose and route field issues, contributing to resolution strategies. Develop or enhance automation tools to support thermal design and validation workflows. Essential Requirements 5+ years of industry experience in: Mechatronics Thermal controls Electronics cooling Hardware/firmware debugging Strong programming skills in Python, C, or similar languages. Familiarity with server systems: BIOS, CPLD, BMC, device drivers. Proficiency in Linux OS and strong understanding of general OS principles. Excellent debugging, problem-solving, and communication skills. Desirable Qualifications Bachelor s or Master s degree in: Computer Engineering Mechanical Engineering with a focus on controls or mechatronics Experience designing and implementing electronic cooling solutions (hardware to firmware). Proficiency with CAD tools (especially CREO) for mechanical and thermal design. You ll work on thermal control systems that enable the latest in AI and high-performance computing, shaping the future of Dell s data center and server technologies. Dell s engineering culture offers hands-on collaboration, career development, and the opportunity to lead innovations at the intersection of hardware, firmware, and software.

Electrical Principal Engineer FPGA Team Location: Bengaluru, India Team: Electrical Engineering Company: Dell Technologies Role Overview As a Principal Electrical Engineer, you will contribute to the architecture, design, and validation of FPGA-based hardware systems for Dell s next-generation enterprise servers. This role involves working across global teams to deliver robust, scalable, and efficient PCBA (Printed Circuit Board Assembly) and logic solutions that align with industry standards and internal requirements. Key Responsibilities Architect and design next-gen hardware features in collaboration with front-end teams and partners. Analyze and recommend trade-offs in design features and costs. Guide global teams with best practices in electronic hardware design. Own and deliver system interfaces and support cross-functional development efforts. Create comprehensive documentation for testing and validation. Essential Requirements 8 12 years of experience in FPGA hardware verification using Verilog, SystemVerilog, VHDL. Expertise in UVM, ABV (Assertion-Based Verification), code coverage, and unit-level simulation. Knowledge in digital design methodologies: CDC (Clock Domain Crossing) RDC (Reset Domain Crossing) Static timing analysis Experience with x86 or ARM architectures. Familiarity with peripheral protocols: I2C, I3C, SMBus, IPMI, IPMB. Strong background in both analog and digital design. Understanding of hardware/software co-design and debugging complex systems. Desirable Qualifications Experience with Intel/AMD x86 and ARM-based systems. Hands-on with FPGA tools: Xilinx, Lattice, Altera Quartus, ModelSim/QuestaSim. Passion for mentoring and knowledge sharing. Dell Technologies offers a collaborative and innovative environment where hardware engineers work at the forefront of industry advancements. You'll be empowered to lead cutting-edge hardware projects, influence product design, and make a lasting impact on the future of enterprise technology.

Job Title: System Engineer Job Type: Full-Time Location: Bangalore Experience Required: 2 3 Years Education: B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation Job Summary: We are looking for a motivated System Engineer with a foundational understanding of RF systems and hands-on experience working with electronic hardware. The ideal candidate should be capable of interpreting schematics and working with standard lab equipment to support system integration and validation tasks. Key Responsibilities: Assist in the design, testing, and validation of RF-based systems. Interpret and analyze hardware block diagrams and schematics. Support schematic reviews and perform basic schematic design activities. Operate and utilize test equipment such as spectrum analyzers, multi-meters, and oscilloscopes. Work on basic concepts of acquisition and tracking, especially in systems like GPS satellite receivers. Collaborate with the hardware and system teams to support integration, debugging, and testing activities. Required Skills & Qualifications: Educational background in ECE, EEE, or Instrumentation. Basic knowledge of RF systems and principles. Familiarity with electronic schematics and hardware block diagrams. Ability to use electronic test instruments (Spectrum Analyzer, Oscilloscope, Multi-Meter). Understanding of GPS signal acquisition and tracking is a plus. Good communication skills and willingness to learn and grow in a technical environment. Qualification : B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Experience in micro architecture and requirements/implementation for automotive designs (focused on functional safety) and their Safety Analysis work products like concept FMEDA, DFA, DFMEA, FTA, FMEDA, etc. including FuSa compliant IP development and third-party IP compliance/deliverables/DIA. Responsibilities shall include the following: Developing a system level safety concepts and requirements for ADAS and IVI use cases with customer implementations in mind and to integrate Qualcomm s hardware in leading Automotive OEM and Tier 1 safety critical systems. Work in collaboration with 3rd party, Customer, and Automotive Stack suppliers, Hardware component suppliers (PMIC, DRAM, Sensor, etc) to ensure all aligned customer system level requirements are met Work with IP and SoC teams on the implementation of Technical Safety Concepts (TSCs) on Qualcomm s Snapdragon automotive hardware. Work with various technology teams on architectural features that would enable targeted safety levels (ASIL B to ASIL D, depending upon the technology team and system level requirements) to meet customer targets Conducting safety analyses, both quantitative and qualitative, fault campaigns on automotive hardware designs and identify areas of improvement. Responsibilities will include leading functional safety related activities for SoC development and ensure ISO 26262 compliance with respect to SoC architecture, development processes and work products. Work closely with SoC Design and IP teams, Software team, Quality teams, the functional safety manager(s) as well as customers to ensure the functional safety process is executed and documented. Working with vendors and partners to ensure functional safety requirements are fulfilled by the components that they provide Work with internal and external functional safety assessors to ensure compliance with ISO 26262 Create functional safety collateral for customers viz. Functional Safety Manual, Safety Analyses Reports, dedicated application notes etc. Supporting customer assessments of our safety features and recommending HW and SW based solutions that meet overall system targets. Working closely with customers and supporting them on various functional safety related aspects Minimum Qualifications Bachelor s degree in engineering, Information Systems, Computer Science, or related field. 8+ years Systems Engineering, SoC Integration, Verification, or related work experience. Collaborative work experience with good communication skills involving customers, vendors, and internal development teams. Structured problem-solving capability and ability to work with teams on root cause analyses. Preferred Qualifications 5+ years Automotive experience and familiarity with Safety work products, experience with Functional Safety Hardware and/or Software development in semiconductor industry meeting IS0 26262/ IEC 61508 standards. Prior automotive experience in ADAS and self-driving systems preferred. System level Functional safety analysis experience on Hardware/Software components integration preferred SoC/IP integration or verification with good understanding of SoC Architecture and IP design experience preferred Requirements Management Tools and establishing traceability for functional safety requirements e.g. DOORS, etc. Familiarity with Failure Modes and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) is required experience using tools to perform FMEA, FTA preferred Familiarity with hardware failure rate calculation (FMEDA) experience using Siemens 29500 and/or IEC 62380 preferred Relevant Safety Certification is desired e.g. CFSE, CFSP Qualification : Bachelors degree in engineering, Information Systems, Computer Science, or related field.

Hardware Engineer - Customer Hardware Design Automation Company Qualcomm India Private Limited Job Area Engineering Group > Hardware Engineering General Summary As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world-class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or a related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or a related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or a related field and 1+ year of Hardware Engineering or related work experience. Job Responsibilities Qualcomm is looking for candidates to support its customers in designing solutions using Qualcomm chipset-based solutions. The candidate will contribute to the development of Customer Hardware design automation tools. Responsibilities include: Developing, enhancing, and maintaining tools that support the design and validation of PCB platforms using Qualcomm chipsets. Collaborating with cross-functional teams to ensure tools meet high standards of quality and performance for PDN, Signal Integrity, and PCB validation tools. Working across applications including Laptops, IoT, and Automotive. Preferred Qualifications Experience in tool development for hardware design automation. Experience in platform-level automated debug solutions. Familiarity with telemetry analytics, Windows debug tools, and analyzers. Knowledge of thermal and power management. Experience in platform validation and debug tools. Proficiency in system automation. Equal Opportunity Employer Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, you may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. Important Note to Agencies Qualcomm s Careers Site is for individuals seeking employment at Qualcomm. Staffing and recruiting agencies, and individuals being represented by an agency, are not authorized to use this site to submit profiles, applications, or resumes. Unsolicited resumes/applications submitted by agencies will not be accepted. Qualcomm does not accept any responsibility for fees related to unsolicited resumes/applications.

General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Additional Job Description Additional Job Description Exciting opportunity to work on Digital Flows/Methodologies architecture and development in energetic multi-site CAD team at Qualcomm. Our team support Simulation, Emulation, Formal Verification and Post Silicon domains providing ample opportunities to grow and contribute. Responsibilities Design, develop, and maintain CAD infrastructure for silicon design teams enabling bringup, test and debug automations. Collaborate with silicon designers, architects, silicon validation engineer, and other stakeholders to to improve future CPU bringups Define and implement new infrastructure capabilities that can be used to accelerate design utilizing multi-site datacenters. Prepare for CPU bring up through pre-work on emulation and FPGA platforms Work with CPU verification teams to reproduce silicon fails on emulators and FPGAs Troubleshoot and resolve issues related to CAD infrastructure, including hardware and software problems Support design engineers on the flow setup and resolve their queries Develop test contents and testing strategies to assist validation of CPU on silicon Qualifications Must have strong object-oriented programming abilities in Python. Must have knowledge and experience with silicon bringup and debugging Must have worked on Digital flows/methodologies development in the Emulation, pre-silicon and/or post-silicon. Familiarity with firmware and software debug, Silicon bring up and validation of CPU features. MS/BS in Electrical/Computer Engineering with 10+ years of demonstrated experience in CAD or EDA tools flows architecture, development, and support. Ability to document design methodologies & provide training on tools and workflows to design teams Strong skills in debugging and analyzing techniques to understand existing scripts/flows; Ability to work independently and explore new domains Proven track record of pushing Prior experience debugging vendor tool problems Strong written and verbal interpersonal skills and track record of success in a collaborative team environment

Job Description Intel is looking for an experienced Customer Quality Engineer to play a key technical support role for Xeon platforms, acting as a primary contact for pre- and post-sales support. In this role, you will represent Intel in customer engagements, ensuring that customer needs are accurately communicated within Intel and that technical challenges are resolved efficiently. You will collaborate closely with Sales and Marketing (SMG) and internal engineering teams to drive strategic technical support and enablement. Key Responsibilities: Xeon systems technology enabling, supporting customers in hardware design and validation. Provide hardware design support, including schematic reviews, layout analysis, SI (Signal Integrity), PI (Power Integrity), mechanical, and thermal analysis. Debug and resolve hardware issues, working closely with internal and external partners. Develop and publish technical documentation, collaterals, and training materials for DCAI (Data Center and AI) platforms. Manage Field Action Customer Returns (FACR) and returns management. Support customer production challenges by offering technical expertise and resolution strategies. Enable early worldwide customer issue support, facilitating platform debug and silicon failure analysis. Provide post-sales technical support for installation, implementation, and maintenance of DCAI reference platforms. Ensure Intel solutions are fully functional and meeting customer specifications, with follow-up technical support as needed. Qualifications & Experience: Educational Requirements: B.E in Electronics & Communication Engineering or a related field. Minimum of 15 years of industry experience in relevant areas. Technical Expertise: Experience in Xeon platforms hardware design and validation. Strong knowledge of schematics, layout, mechanical, and thermal analysis. Experience in electrical validation and signal integrity (SI) analysis (desirable). Expertise in hardware issue validation and debug. Proven ability to develop technical documents and presentations for customer training and support. About Intel Validation Engineering (iVE) Group: The Intel Validation Engineering (iVE) Group plays a crucial role in Intel s product leadership, ensuring that the latest cutting-edge designs and technologies meet the highest quality standards. iVE is responsible for validating, debugging, and optimizing Intel s products, ensuring the timely delivery of Intel s annual technology roadmap. Intel s Commitment to Diversity & Inclusion: Intel is committed to providing equal employment opportunities to all qualified applicants regardless of race, gender, religion, nationality, disability, or any other protected characteristic under local laws. Intel offers a best-in-class compensation and benefits package, including: Competitive salary, stock options, and performance-based bonuses. Comprehensive healthcare, retirement plans, and paid time off. Opportunities for career growth, leadership, and professional development. Qualification : B.E in Electronics & Communication Engineering or a related field.

Position: RTL Design Engineer Location: Bangalore Education: Engineering Degree in Electronics & Communication (E&C) Experience: 3 to 6 years Job Overview We are seeking a skilled RTL Design Engineer to own the full lifecycle of FPGA design projects from understanding customer requirements to final delivery. You will define DSP, system, and board architecture, partition algorithms between FPGA and software, and lead design, simulation, and verification activities. This role requires hands-on expertise with FPGA technologies, strong problem-solving skills, and the ability to engage closely with customers and production teams. Key Responsibilities Interpret customer requirements, specifications, and tender documents to define system architecture. Take end-to-end ownership of projects including risk assessment, mitigation planning, schedule tracking, and customer discussions. Partition signal processing algorithms for FPGA and software implementation; identify key building blocks. Provide estimates for FPGA resources, computational and memory bandwidth needs. Develop detailed module-level designs including coding, simulation, and peer reviews. Apply design, verification, and validation methodologies rigorously. Prepare and maintain comprehensive project documentation, including design and analysis reports. Support customers during integration and testing phases on-site. Assist production teams with technical support. Define RTL architecture and perform HDL coding, simulation, implementation, board testing, and debugging. Professional Skills & Technical Expertise Proficient in VHDL coding; experience with Verilog or SystemVerilog is a plus. Expertise with Xilinx FPGA devices and associated synthesis and implementation tools. Strong experience in functional simulation and hardware logic design/debugging. Familiarity with FPGA synthesis and place & route (PAR) tools. Experience implementing DSP algorithms in FPGA environments, especially for Radar and Electronic Warfare applications. Skilled in modeling algorithms using MATLAB/Octave, generating test vectors, and data visualization. Working knowledge of interfacing with ADCs and DACs, and analyzing their performance. Good command of configuration and version control tools such as SVN. Excellent communication and presentation skills for technical discussions and customer interactions. What You ll Bring Strong analytical mindset and problem-solving abilities. Ability to work independently and manage multiple tasks effectively. Detail-oriented with a commitment to high-quality design and documentation. Collaborative attitude to work across teams and customer sites. Qualification : Engineering Degree in Electronics & Communication (E&C)

Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 1 Year Openings: 1 About the Role: As a DCS Engineer, you will report to the Assistant Manager Engineering Services. Your primary purpose will be to manage the complete product lifecycle for DCS applications, encompassing software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role that requires both strong analytical skills and a readiness to travel. What You'll Do: DCS Software Development: Develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Configuration: Gain hands-on experience and apply your knowledge in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Commissioning & Testing: Lead and execute the programming, commissioning, and testing of 800xA systems on-site. Customer Support: Provide excellent customer handling and support for Factory Acceptance Testing (FAT), ensuring client satisfaction. Project Lifecycle Management: Take responsibility for the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel extensively to customer sites across India for commissioning activities. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: 0 to 1 year of experience in a relevant engineering role. Technical Skills: Strong knowledge and hands-on experience with ABB 800xA Software Development. Proficiency in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Demonstrated experience in the complete project lifecycle from software development to commissioning in ABB 800xA. Excellent analytical skills to troubleshoot and optimize systems. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Good communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India.

Junior Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 2 Years Openings: 1 About the Role: As a Junior DCS Engineer, you'll report to the Assistant Manager Engineering Services. Your primary purpose will be to support the complete product lifecycle for DCS applications, focusing on software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role ideal for someone looking to build their expertise in industrial automation, requiring both analytical skills and a readiness to travel. What You'll Do: HMI Graphic Development: Develop and design Human-Machine Interface (HMI) graphics for DCS systems, ensuring intuitive and effective user interfaces. DCS Software Development: Assist with and learn to develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Programming & Commissioning: Participate in the programming, commissioning, and testing of 800xA systems on-site, gaining practical experience in live environments. Project Lifecycle Support: Support the team across the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel to customer sites across India for commissioning activities as needed. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: Candidates with 0-2 years of experience in industrial automation, control systems, or relevant project work will be considered. Technical Skills: Good analytical skills to understand and troubleshoot system functionalities. An understanding of the complete project lifecycle from software development to commissioning, especially in ABB 800xA, is highly beneficial. Willingness to learn and grow in a technical environment. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Strong communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India. If you're a recent graduate or early-career engineer with a passion for DCS systems and eager to launch your career in industrial automation, we encourage you to apply! Qualification : A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication

Job Title: Technical Support Associate Location: Bengaluru, India Company: IntouchCX Experience: Minimum 6 months (with international customers) Job Type: Full-time About IntouchCX IntouchCX delivers premium customer experiences for major global brands across voice, chat, email, and social platforms. They are known for their tech-forward support and commitment to quality-driven service. Role Overview As a Technical Support Associate, you will: Provide multi-level support for hardware, software, OS, and network issues. Troubleshoot problems using remote access, email, and phone. Deliver technical advice, resolve issues, and ensure customer satisfaction. Represent the brand with strong communication and technical expertise. Key Responsibilities Diagnose and resolve software application and hardware issues Handle installation and maintenance of operating systems and computer applications Troubleshoot network/VPN/intranet/internet connectivity problems Provide guidance and recommendations based on customers technical issues Set up and support laptops, desktops, notebooks, and related hardware Maintain high standards of technical documentation and resolution tracking Qualifications & Skills Experience: At least 6 months of technical support (international BPO/tech support preferred) Language: Fluent spoken English Skills: Excellent problem-solving and analytical thinking Strong interpersonal and customer handling skills Good knowledge of consumer electronics, IT products, OS, and networks High emotional intelligence and ability to remain calm under pressure Passion for technology and self-learning Benefits Competitive salary with performance-based incentives Medical insurance Free food and transport (for on-site shifts) Growth opportunities through training and development Strong employee recognition and engagement programs

Position: Application Engineer, IP&E Job Overview: We are looking for an Application Engineer specializing in IP&E (Interconnect, Passive, and Electro-Mechanical systems) to provide advanced engineering design services and support to our regional engineering team. In this role, you will align with suppliers and technology strategies to maximize business growth while supporting product development across a range of industries. Your expertise will help guide the team in identifying and promoting components such as connectors, terminal blocks, headers, and high-power connectors. Key Responsibilities: Provide advanced engineering design support for interconnects, passive devices, and electro-mechanical systems, collaborating with suppliers to maximize business growth. Identify and recommend component applications tailored to specific technologies and industries. Offer hardware support by identifying, cross-referencing, and promoting components like connectors, terminal blocks, headers, sockets, EV connectors, and high-power/high-speed connectors for product development. Ensure all designs comply with relevant industry standards and customer specifications. Leverage strong technical knowledge of interconnects, passives, and electro-mechanical systems to support the regional engineering team. Stay up to date with current technology trends through technical and sales training. Develop product performance specifications and product development roadmaps. Ensure the accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Mechanical, Electrical Engineering, or a related field. At least 7 years of experience in IP&E component applications and product development. Proven experience working in R&D environments and product design processes. Knowledge of interconnect technologies such as board-to-board, wire-to-board, connectors, cables, terminal blocks, headers, sockets, backplane systems, flex circuits, and high-speed or high-density systems. Experience with innovative cable products and cable assembly products. Excellent problem-solving skills with a keen attention to detail. Strong communication and collaboration skills to work effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Training and professional development opportunities. Performance coaching and growth support. Opportunity to work with a fun and supportive team. Be part of a strong and growing company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Mechanical, Electrical Engineering, or a related field.

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Job Summary: (Sr. Lead Engineer) Qualcomm Simulation platform team would be responsible for defining/prototyping/developing software s on the emulation platforms. Looking for an experienced BSP engineer for virtual platform, who can help us is developing virtual prototype software solution for snapdragon automotive products. Candidate must have an excellent understanding of the complex SoCs architecture & its Software stack. Education & Experience: Bachelor s/master s degree in computer science, electronics engineering, or relevant domain with 6~8 years relevant industry experience. Primary Responsibility: Software (BSP) Bring-up on Virtual Platforms. Understand the emulation platform SoC architecture and develop single software solution. Ability to collaborate with cross functional teams and deliver the quality product under strict timeline. Define & develop custom virtio architectures. Pre-silicon software development platform prototype development Develop solution to improve performance of software running on Virtual platform. Supporting internal & external customers on Bring up & debugging from Software & emulation side. Mandatory Skills: Knowledge in Linux/QNX BSPs & Full Boot Chain. Strong System level programming skills in C/C++. Python, Rust is a plus. Excellent knowledge of OS fundamentals, Data structures, Linux kernel and its device driver model Strong debugging, analytical and problem-solving skills. Should have knowledge on debuggers like T32,gdb, etc., Strong collaboration skills with the ability to collaborate with multiple functional teams. Able to understand and debug large complex SW. Fair understanding of CPU (ARM), subsystems, SOC architecture and its SW-layers Fair understanding of the Virtual Machines with Type1 and Type2 Hypervisors Added Advantage: Fair understanding of QEMU/KVM platforms. Fair understanding of multimedia systems (GPU/Display/CAM/VPU/etc.,) knowledge. Fair knowledge of hardware-software interface and SystemC ASPICE and ISO26262 know how is preferred. Automotive experience is preferred. Qualification : Bachelors/masters degree in computer science, electronics engineering, or relevant domain with 6~8 years relevant industry experience.

Senior Emulation Engineer Company Arm Location Bengaluru, India Job Overview Arm s Central Emulation team is excited to welcome experienced Emulation experts to join the team in Bengaluru. You will collaborate with design and verification engineers across the UK, US, India, and France to support advanced Compute Subsystems and SoC projects. Arm is building a team to develop exceptional silicon demonstrators based on Arm s IP compute sub-system solutions, targeting premium mobile, infrastructure, and automotive markets. Using the latest technology nodes (e.g., 3nm) and new 3D packaging innovations, Arm s goal is to demonstrate industry-leading performance by architecting, designing, implementing, and fabricating cutting-edge silicon test chips. This initiative brings together innovative talent and expertise from across the semiconductor industry to shape the next generation of compute on Arm devices. Responsibilities Collaborate with end users to understand system use cases and guide validation efforts. Ensure tight integration between hardware qualification and final application use models. Work in an exciting emulation environment using hybrid and virtual solutions, integrating industry-standard high/low-speed IO IPs into subsystems and SoCs. Engage from early architecture and design phases to pre-silicon validation and post-silicon validation on emulation platforms. Drive pre-silicon emulation across all SoC teams. Ensure design quality and debuggability by collaborating closely with the design team. Support architecture, verification, system validation, performance, power, and DFT teams with insights from performance and power characterization. Develop comprehensive pre and post-silicon test plans in collaboration with verification teams. Develop tests, create bare-metal drivers for industry-standard IO IPs, and build frameworks to enable scalable testing across multiple ASIC projects. Required Skills and Experience Bachelor s degree (BE/BTech) in Electronics Engineering. 8+ years of experience in Pre-Silicon Validation and Emulation/FPGA-based platforms. Experience developing C/C++/SystemC tests for HDL-HVL co-emulation platforms. Proficiency in IO bus protocols such as I2C, SPI, USB, and/or PCIe. Experience with SoC debugging tools such as JTAG and Trace32. Nice-to-Have Skills and Experience Knowledge of ASIC design and prototyping flows. Experience with SystemC/C/C++ and UVM/SystemVerilog (SV) verification languages. Familiarity with domains such as PCIe, Flash, Memory, CPU, GPU, and DRAM. Hands-on experience with emulation toolchains such as Zebu, Veloce, or Palladium. What Arm Offers Arm is committed to global talent acquisition, offering an attractive relocation package. With offices worldwide, Arm is a diverse organization of dedicated, creative, and hardworking engineers. By fostering a dynamic, inclusive, meritocratic, and open workplace where everyone can thrive, Arm encourages its people to make exceptional contributions to its global success. #LI-KR2 Qualification : Bachelors degree (BE/BTech) in Electronics Engineering.