Assistant Manager Quality Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Position: Deputy General Manager (DGM/GM) Vehicle Dynamics Functional Unit: Vehicle Dynamics Location: Pune Department: Vehicle Dynamics About SRDI: SRDI is at the forefront of automotive research, IT, and product development, shaping a safer, more efficient, and sustainable mobility future. We harness cutting-edge technologies to deliver transformative solutions from sustainable mobility innovations to connected vehicles. At SRDI, innovation and sustainability drive everything we do. At our Innovation Hub, talent meets tomorrow s mobility. We offer a dynamic environment that fosters professional growth and challenges you to redefine the future of automotive technology. About Suzuki: Join a global automotive pioneer with over a century of innovation! Founded in 1909, Suzuki employs 70,000 people worldwide and has sold over 3 million automobiles. With 31 production facilities across 21 countries, and products ranging from automobiles and motorcycles to motorized wheelchairs and electro-senior vehicles, Suzuki s impact spans 209 countries. Educational Qualifications: Graduation: B.Tech in Automobile / Mechanical / Electronics / Mechatronics Post-Graduation: M.Tech in Automobile / Mechanical / Electronics / Mechatronics Experience: Minimum: 10 years Maximum: 15 years Strong knowledge of physics (mechanics) at a B.Tech level Minimum 2 years of experience with HyperMesh and Nastran Key Responsibilities: Enhance vehicle development efficiency by visualizing specification ranges that meet target performance. Develop CAE models for ride comfort, incorporating elastic body modeling. Perform optimization calculations and CAE data analysis related to ride comfort. Lead team expansion, talent management, and skill development initiatives. Drive leadership development and plan training for team members. Deputation/training at Suzuki Motors Corporation, Japan (6 12 months). Software Knowledge: Adams MotionSolve RecurDyn SIMPACK SolidWorks Core Competencies & Skills: Expertise in vehicle dynamics modeling and mechanism analysis. Proficiency with CAE tools (HyperMesh, Nastran) for structural and ride comfort analysis. Strong analytical and conceptual thinking skills. Experience in team leadership, talent management, and skill enhancement planning. Excellent communication, presentation, and problem-solving abilities. Knowledge of AI/ML applications in vehicle development (preferred). Qualification : B.Tech in Automobile / Mechanical / Electronics / Mechatronics

Assistant Manager PMG (Project Management Group) Location: Pune Head Office Company: Gera Developments Pvt. Ltd. Experience: 7+ Years Industry: Real Estate / Construction Function: Project Management & Planning Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a leading name in real estate with a legacy of innovation, quality, and excellence. With landmark projects across Pune, Goa, and Bangalore, we are redefining spaces that elevate lifestyle and living standards. We believe in pushing boundaries, whether it s through our pioneering child-centric homes or technologically advanced workspaces. Role Overview: As an Assistant Manager PMG, you will play a critical role in project monitoring, design coordination, schedule adherence, and cross-functional alignment. You will act as a key interface between the planning, design, and execution teams to ensure timely project delivery and smooth coordination across all phases. Key Responsibilities: Project Schedule Monitoring: Review overall project timelines and provide actionable inputs to the planning team. Track deliverables and raise alerts on any deviations or delays. Design Coordination: Monitor the design delivery schedule and escalate concerns proactively. Act as a liaison between design consultants and internal stakeholders. Stakeholder Engagement: Attend weekly project meetings to understand ongoing challenges and coordinate resolutions. Maintain strong follow-ups with key project stakeholders to ensure alignment and progress. Site Interface: Conduct regular site visits to assess progress and support in resolving execution challenges. Communicate on-ground realities to the HO for timely decision-making. Execution Support: Assist the execution team during the handover stage, ensuring management support is available for swift resolution and closure. Requirements: Education: Bachelor's Degree in Civil Engineering (Mandatory) Experience: Minimum 7 years of total experience At least 4 5 years in project planning or coordination roles Exposure to design coordination will be an added advantage Technical Skills: Proficient in MS Office (Word, Excel, PowerPoint) Understanding of construction workflows, timelines, and project lifecycle Soft Skills: Excellent communication and interpersonal skills Strong follow-up and coordination abilities A go-getter attitude with a collaborative and problem-solving mindset Ability to work across functions and lead through influence Work with a forward-thinking real estate brand Exposure to industry-best practices in project delivery and design execution Be part of a culture that encourages learning, innovation, and ownership Qualification : Bachelor's Degree in Civil Engineering (Mandatory)

Assistant Manager Leasing Location: Pune Company: Gera Developments Pvt. Ltd. Department: Leasing & Property Management Experience: 3 6 Years Employment Type: Full-time About Gera Developments Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering high-quality residential and commercial projects. With a legacy of over 50 years, Gera is recognized for innovation, transparency, and a strong customer-first philosophy. Job Purpose To ensure the efficient and accurate execution of leasing operations, from documentation to payment tracking. This role will work cross-functionally with finance, legal, and operations teams to manage leasing lifecycle activities, generate reports, and support tenant coordination. Key Responsibilities Lease Management Maintain accurate records of all lease agreements, renewals, and terminations. Track key dates (renewals, expiries, notice periods) and ensure proactive re-leasing strategies. Ensure all leasing activities are conducted as per defined internal processes. Billing & Payment Oversight Prepare and issue invoices for rent, CAM charges, and other billables. Track and monitor incoming/outgoing payments, following up on delays or discrepancies. Liaise with the finance team for monthly reconciliation and collections tracking. Cross-functional Coordination Act as a central point of contact between leasing, finance, operations, and legal departments. Assist legal teams in reviewing and updating lease-related documentation. Ensure coordination for tenant onboarding and exit processes. Reporting & Analysis Generate and maintain monthly and quarterly reports on: Occupancy & vacancy status Revenue forecasts Lease expiries & upcoming renewals Provide timely updates to management for strategic decision-making. Tenant Support Address tenant inquiries related to lease terms, payments, or renewal processes. Ensure timely resolution of complaints and excellent tenant experience. Process Improvement Evaluate existing leasing workflows and propose enhancements for efficiency and compliance. Recommend automation or software improvements where applicable. Requirements Education: Bachelor s Degree in Commerce, Business Administration, Real Estate, or related field. MBA preferred (but not mandatory). Experience: 3 6 years of relevant experience in leasing operations, preferably in real estate, commercial property management, or retail leasing. Skills & Competencies Functional Skills: Strong understanding of leasing processes and real estate contracts Experience in invoice generation, payment tracking, and reconciliation Excellent command over MS Excel and working knowledge of leasing/property management software Meticulous record-keeping and documentation skills Soft Skills: Strong coordination and stakeholder management Excellent verbal and written communication Highly organized, proactive, and process-oriented Ability to handle confidential data with integrity Be part of one of Pune s most respected real estate developers Work in a dynamic, fast-paced environment Opportunity to collaborate across departments and contribute to business-critical operations If you're passionate about operational excellence and real estate leasing, Gera is the place to accelerate your career. Qualification : Bachelors Degree in Commerce, Business Administration, Real Estate, or related field

Position: Assistant Manager Marketing Location: Pune Qualification: MBA Experience: Minimum 8 Years Job Description: We are seeking an experienced and strategic Assistant Manager Marketing to lead brand promotion initiatives and execute targeted marketing campaigns that drive sales growth. The ideal candidate will have a strong understanding of market dynamics, excellent project management skills, and a proven track record of delivering impactful marketing solutions. Key Responsibilities: Plan and execute marketing strategies and brand promotion activities to generate leads and boost sales opportunities. Collaborate with sales and project teams to understand business needs and align marketing efforts accordingly. Design and implement marketing campaigns within approved budgets, ensuring ROI and performance metrics are met. Conduct market research and competitor analysis to identify trends, customer preferences, and business opportunities. Provide strategic insights and recommendations to senior management based on market data and campaign performance. Manage and coordinate with external agencies, vendors, and creative partners to ensure timely and quality deliverables. Prepare and present periodic MIS reports on marketing performance, including channel effectiveness and campaign outcomes. Qualification : MBA

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Technical Architect Designation: Assistant Manager Experience Required: 14 Years Location: Pune Role Overview: We are looking for an experienced Technical Architect to lead the architecture and design of embedded systems, specifically Electronic Control Units (ECUs). This role involves defining the overall hardware and software architecture, ensuring alignment with project goals, and managing cross-functional technical teams. Key Responsibilities: Serve as the technical leader for embedded system projects, primarily focused on ECU development. Define and govern end-to-end system architecture, covering both hardware and software components. Provide architectural guidance throughout the project lifecycle from concept to deployment. Collaborate closely with hardware, software, and validation & verification (V&V) teams to ensure cohesive integration. Manage and coordinate efforts across team leads from software, hardware, and V&V divisions. Review and approve technical documentation, design specifications, and system requirements. Ensure adherence to industry standards, scalability, and best practices in system architecture. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 14+ years of experience in embedded systems development with a strong background in system architecture. Proven experience in leading multidisciplinary technical teams. Solid understanding of both hardware and software aspects of embedded system design. CDAC certification in VLSI or a related domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Lead Hardware Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are seeking a highly skilled and experienced Technical Lead Hardware to lead our embedded hardware development projects. The ideal candidate will be responsible for designing and developing complete electronic circuits, creating prototypes, and managing the transition from design to production. This role also involves leading and mentoring a team of hardware engineers. Key Responsibilities: Lead the hardware development efforts for embedded system projects. Design and develop end-to-end electronic circuits and schematics. Create and test prototypes and sample hardware. Oversee the hardware lifecycle from concept through to mass production. Collaborate with cross-functional teams including firmware, mechanical, and testing teams. Guide and mentor a team of hardware engineers to meet project goals and timelines. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of hands-on experience in hardware design and development. Strong understanding of embedded system hardware design. CDAC certification in VLSI or a related specialization is a plus. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member Hardware Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a motivated and skilled Technical Member Hardware to join our hardware design team. The ideal candidate should have hands-on experience in PCB design, circuit simulation, and testing. This role offers an excellent opportunity to work on cutting-edge embedded systems hardware alongside an expert team. Key Responsibilities: Contribute to the design and development of hardware systems as part of the hardware design team. Design PCBs and perform component selection based on design requirements. Simulate circuit schematics and analyze performance. Operate high-end testing and debugging equipment in a lab environment. Perform precision soldering, including handling of SMD components. Assist in prototyping, validation, and troubleshooting of hardware systems. Contribute to documentation and design reviews. Preferred Skills: Experience with PCB design tools and simulation software. Proficient in using lab instruments such as oscilloscopes, multimeters, logic analyzers, etc. Knowledge of soldering techniques and handling fine-pitch components. Exposure to RF design will be considered a strong advantage. Qualifications: B.E./B.Tech in Electronics or Electrical Engineering. 4+ years of experience in hardware design and development. CDAC certification in VLSI or a related field is an added advantage. Qualification : B.E./B.Tech in Electronics or Electrical Engineering

Position: Technical Lead Software Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are looking for an experienced Technical Lead Software to lead the software development efforts for our ongoing embedded systems projects. The candidate will be responsible for designing and developing MISRA-compliant code based on architectural specifications or requirement documents, ensuring compatibility with in-house designed hardware. Key Responsibilities: Lead the software development activities for embedded systems projects. Design and implement MISRA-compliant embedded software from architecture or requirements documents. Ensure seamless integration and compatibility with in-house developed hardware. Develop both low-level (driver/firmware) and high-level software design components. Apply best practices in embedded coding standards, software architecture, and debugging techniques. Collaborate with hardware, testing, and system teams throughout the development lifecycle. Lead and mentor software engineers and coordinate with cross-functional teams. Required Skills: Strong knowledge of embedded C/C++ and MISRA coding standards. Experience with microcontrollers, communication protocols (SPI, I2C, UART, CAN, etc.). Expertise in debugging tools, IDEs, and version control systems. Understanding of real-time operating systems (RTOS) and device driver development. Familiarity with both low-level firmware and application-level code development. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of experience in embedded software development. CDAC certification in VLSI or a similar domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member (Verification & Validation) Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a dedicated Technical Member to join our Verification & Validation (V&V) team for ongoing embedded projects. The candidate will play a key role in ensuring the quality and reliability of our products through thorough testing at various levels. Key Responsibilities: Develop and design detailed test cases and test vectors for embedded products. Execute tests ranging from unit-level verification to full functional testing at the vehicle level. Participate in test planning, test execution, and defect tracking. Coordinate and oversee field testing and track testing during later stages of product development. Collaborate closely with hardware, software, and system teams to ensure comprehensive validation. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 4+ years of experience in verification and validation of embedded systems. Familiarity with embedded testing methodologies and tools. CDAC certification or VLSI knowledge is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Senior Manager Commercial After Market Location: Pune Reporting To: Assistant General Manager Commercial Education: ICWA Experience: 6 8 years Industry Preference: Heavy Engineering / Automobile Job Purpose To drive profitability and process excellence across the After Market business vertical, including spare parts, services, AMC, FMC, and rental operations. The role involves strategic commercial analysis, business partnering, process improvement, and ensuring robust internal controls through SOPs and compliance practices. Key Responsibilities Commercial Analysis & Business Structuring Analyze and structure commercial contracts related to After Market services (spare parts, AMC, FMC, rental, etc.). Evaluate business proposals such as service contracts, machine sales, and used machine valuations considering profitability, condition, usability, and documentation accuracy. Review and monitor rental contracts for adherence and timely execution. Business Partnering & Strategy Partner with cross-functional teams (Service, Sales, Finance) to identify opportunities for revenue enhancement and cost optimization. Support sustainable growth through data-backed decision-making and risk analysis. Internal Controls & SOP Development Design, implement, and strengthen internal control mechanisms to ensure process compliance and accountability. Prepare and update Standard Operating Procedures (SOPs) in alignment with organizational best practices. Process Improvement & Automation Identify repetitive or manual processes and propose automation solutions to improve efficiency. Introduce process orientation and scalable systems for commercial tasks. MIS & Reporting Develop and maintain custom MIS reports to meet evolving business needs. Provide analytical insights to management for strategic decision-making. Analyze workshop productivity and efficiency metrics monthly to drive performance improvements. Documentation & Audit Trail Ensure all commercial calculations, contract decisions, and business proposals are documented thoroughly and systematically for audit readiness and traceability. Required Skills & Competencies Strong analytical and problem-solving abilities. Excellent verbal and written communication. Proficient in commercial documentation and financial evaluation. Effective interpersonal skills with the ability to influence stakeholders. Strong presentation and reporting skills. Collaborative, assertive, and process-driven. Proficient in planning, organizing, and multitasking. Qualification : ICWA

Position: Supply Chain Senior Engineer Location: Pune Reports To: Assistant General Manager Supply Chain Educational Qualification: B.E. Mechanical / Industrial Production Experience: 4 7 years Purpose of the Role To ensure timely and efficient procurement of materials in alignment with production needs, while maintaining optimum inventory levels and driving operational excellence across the supply chain. Key Responsibilities Procurement & Inventory Management Release purchase orders and manage end-to-end procurement activities in line with ERP processes. Monitor material availability to meet production schedules while avoiding overstock and stockouts. Implement engineering changes with minimal impact on inventory, obsolescence, and scrap. Stakeholder Communication & Coordination Liaise with suppliers, service providers, and internal departments to ensure smooth material flow. Build and maintain strong, reliable supplier relationships. Escalate unresolved issues to the reporting manager in a timely manner. Compliance & Process Adherence Follow standard operating procedures (SOPs) and organizational protocols rigorously. Ensure adherence to company guidelines on sourcing processes, compliance, and ethical conduct. Key Skills & Competencies Proficient in managing A-Class procurement, including local and imported long-lead items. Strong knowledge of ERP systems and digital procurement tools. Understanding of manufacturing processes and production planning. Familiarity with supply chain principles like cycle time, lead time, JIT, Kanban, push/pull systems. Effective communication and interpersonal skills for internal and external coordination. Strong organizational and planning abilities with a problem-solving mindset. Qualification : B.E. Mechanical / Industrial Production

Job Title: Assistant Manager Accounts & Taxation Location: Pune Employment Type: Full-Time Experience Required: Minimum 8 Years Reporting To: Manager Finance & Accounts Industry: Real Estate Role Overview: We are seeking an experienced and detail-oriented Assistant Manager Accounts & Taxation to join our finance team. This role involves managing accounting operations, ensuring timely and accurate tax compliance, supporting ERP-based financial reporting, and assisting with audits and project accounting. The ideal candidate will have a strong foundation in accounting and taxation, hands-on ERP experience, and a proactive, collaborative work ethic. Key Responsibilities: 1. Accounting & General Ledger Management Record day-to-day accounting transactions, including project-specific entries Support monthly and annual closing processes Ensure accurate documentation and accounting for income, expenses, and provisions 2. Taxation (GST, TDS, Income Tax) Assist in the preparation and timely filing of GST, TDS, and other statutory returns Reconcile tax liabilities and input credits in the ERP system Manage challans, documentation, and audit support for all taxation matters 3. ERP & Financial Systems Operate within ERP platforms to input, track, and extract accounting data Contribute to ERP enhancements and user support initiatives Ensure data integrity and timely entry across financial systems 4. MIS & Financial Reporting Generate project-wise cost sheets, cash flow statements, and collection reports Prepare regular and ad-hoc financial reports using ERP and reporting tools Assist in budgeting, forecasting, and financial planning activities 5. Audit & Compliance Prepare audit schedules and support statutory and internal audits Ensure compliance with industry regulations including RERA (Form 3, Form 5) Maintain complete and organized documentation for audit trails 6. Cross-Functional Collaboration Coordinate with teams across Projects, Procurement, Legal, and HR for invoice verification, payment processing, and cost allocation Liaise with consultants for tax planning, audit support, and ERP issues Technical Skills Required: Sound understanding of GST, TDS, and direct/indirect tax provisions Proficiency in ERP systems (minimum 2 years), especially real estate ERPs like ERP-Hi Rise, FAR Vision, or Tally Prime Strong command of MS Excel, Word, and financial reporting tools Key Competencies: Technical: ERP-Based Accounting & Reporting Direct and Indirect Tax Compliance Financial Reconciliation and Documentation Project Accounting (Real Estate Focus) Audit Preparation & Support Behavioral: Attention to Detail: High accuracy in data entry and reporting Team Collaboration: Effective cross-functional coordination Organized & Proactive: Plans tasks and meets tight deadlines Analytical Thinking: Identifies and resolves discrepancies Ethical Integrity: Maintains confidentiality of financial data Qualifications: Education: MBA (Finance), B.Com, or M.Com Experience: Minimum 8 years of relevant experience in accounts and taxation, with at least 3 years in ERP-based accounting in the real estate sector Job Summary: The Assistant Manager Accounts & Taxation plays a critical role in maintaining accurate financial records, ensuring tax compliance, and generating insightful reports through ERP systems. This position supports strategic financial decision-making and enables operational excellence through structured accounting and cross-departmental collaboration within the real estate industry. Qualification : MBA (Finance), B.Com, or M.Com

Position: Deputy Manager SQI (MG3) Location: Pune Experience Required: 8 to 15 years Job Summary: We are seeking a seasoned Deputy Manager (MG3) to lead the Supplier Quality Improvement (SQI) function for Electrical & Electronics parts. This role involves driving supplier development, implementing IEC standards, conducting type testing, and spearheading quality and cost optimization projects. The position also offers cross-functional support to Kirloskar New Energy BU and Kirloskar Electrical & Electronics BU. Key Responsibilities: Supplier Quality Improvement (SQI): Manage SQI activities for Electrical & Electronics parts in new product development. Drive supplier process improvement initiatives and implement best practices. Conduct supplier evaluations, audits, and participate in the selection process. New Product Development & Type Testing: Lead vendor development for new parts aligned with product requirements. Study, interpret, and apply IEC standards to ensure compliance. Supervise and coordinate type testing of components to validate design integrity. Strategic Projects: Lead and contribute to critical quality improvement projects aimed at reducing warranty costs. Drive cost-saving initiatives without compromising quality standards. Provide SQI support across other business units GEE, Kirloskar New Energy BU, and Kirloskar Electrical & Electronics BU. Desired Candidate Profile: Bachelor s degree in Electrical, Electronics, or related Engineering discipline. 8 15 years of hands-on experience in supplier quality, vendor development, and component validation. Strong knowledge of IEC standards and experience with type testing protocols. Proven track record in quality improvement and cost reduction projects. Ability to work cross-functionally and manage multiple stakeholders. Key Skills: Supplier Quality | Electrical & Electronics | New Product Development | Vendor Development | IEC Standards | Type Testing | Quality Improvement | Cost Reduction | Warranty Analysis | Process Audit | SQI Qualification : Bachelors degree in Electrical, Electronics, or related Engineering discipline

Position: Assistant Manager Digital Marketing Location: Pune Experience: 5 10 years Qualification: MBA in Marketing or Digital Marketing (preferred, not mandatory) About the Role We are seeking an experienced and result-driven Assistant Manager Digital Marketing to lead and manage the digital marketing initiatives for Sahyadri Hospitals. This role requires a strong understanding of the digital ecosystem, with a focus on growing our online presence, driving high-quality leads, and enhancing the brand s digital footprint across multiple channels. You will be responsible for developing and executing digital strategies, overseeing content creation, managing vendor relationships, and ensuring ROI on all campaigns. Key Responsibilities Develop and execute comprehensive digital marketing strategies to enhance both organic and paid visibility across platforms Manage website development, maintenance, and performance optimization Lead and monitor the execution of social media campaigns across platforms (Facebook, Instagram, LinkedIn, etc.) Handle Online Reputation Management (ORM) by actively tracking reviews, feedback, and brand perception Run performance marketing campaigns including Google Ads, Facebook Ads, remarketing strategies, and health portal advertising Manage and source content for blogs, web pages, media releases, and digital articles in coordination with internal stakeholders and doctors Drive lead generation from digital channels and ensure conversion tracking and ROI optimization Identify and explore new digital opportunities, including co-marketing, influencer collaborations, and health-tech partnerships Coordinate with multiple vendors such as advertising agencies, web development partners, and media houses for seamless campaign execution Collaborate with internal teams across units and departments to align digital marketing deliverables with business goals Key Skills & Competencies Digital Marketing Strategy & Campaign Planning SEO & SEM (Search Engine Optimization & Marketing) Social Media Marketing & Optimization (SMM & SMO) Performance Marketing (Google Ads, Facebook Ads, Remarketing) Google Analytics & Reporting Tools Content Planning and Management Brand Building & Online Reputation Management (ORM) Vendor & Budget Management Preferred Qualifications MBA in Marketing or Digital Marketing (preferred but not mandatory) Certifications in Digital Marketing (e.g., Google Ads, HubSpot, Meta Blueprint) 5+ years of experience in digital marketing, preferably in healthcare, hospitality, or consumer-focused industries Strong communication, coordination, and analytical skills Qualification : MBA in Marketing or Digital Marketing

Position: Chief of Medical Services Location: Pune Experience: 10 15 Years (including 5+ years in a leadership role) Qualification: Mandatory: MBBS/MD Preferred: MHA / MPH / MBA in Healthcare Management License: Valid medical license and board certification About the Role We are seeking an accomplished and dynamic Chief of Medical Services to lead and oversee the clinical governance, medical operations, and quality of care across the hospital. This strategic role requires a senior medical professional with a proven track record in leadership, regulatory compliance, and operational excellence. As a key member of the leadership team, you will ensure that all medical services meet the highest standards of care, safety, ethics, and efficiency. Key Responsibilities Provide clinical leadership to guide the planning, implementation, and improvement of medical services Oversee adherence to hospital policies, protocols, and ethical practices across all clinical departments Lead the review and analysis of sentinel and adverse events to ensure continuous quality improvement Manage medical manpower planning, including recruitment, credentialing, and budgeting for consultants and junior doctors based on occupancy and hospital needs Collaborate with administrative and support departments to ensure timely execution of contracts, payments, and medical service-related processes Ensure all clinical services are delivered in line with the organization s standards, protocols, and regulatory guidelines (e.g., NABH, JCI) Conduct daily administrative rounds, engage in patient and family counselling, and address medical grievances effectively Supervise and enforce proper documentation, storage, and management of medical records in line with retention and medico-legal policies Ensure timely and accurate medico-legal documentation and follow-ups Monitor and drive statutory and regulatory compliance across all medical departments Required Skills & Competencies Strong clinical acumen backed by MBBS/MD qualification Proven leadership and team management capabilities in a healthcare setting Expertise in strategic planning, decision-making, and hospital administration In-depth knowledge of regulatory standards (e.g., NABH, JCI, MCI, statutory norms) Excellent interpersonal and communication skills for effective collaboration and conflict resolution Ability to lead multidisciplinary teams and ensure a patient-centric approach to care Eligibility Criteria MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred 10 15 years of clinical experience, including 5+ years in a senior healthcare management or leadership role Valid medical registration and board certification Qualification : MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.