Bill OF Materials BOM Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Senior Analyst TReC Costing Location: Pune, India Company: FORVIA (Faurecia Interior Systems) About FORVIA FORVIA is a global leader in automotive technology, focused on delivering innovative and sustainable mobility solutions. As the 7th largest global automotive supplier, we are shaping the future of mobility with over 157,000 employees in 43 countries. Your Mission As a Senior TReC Costing Analyst, you will be responsible for calculating and managing tooling reference costs for FORVIA Interior Systems programs. You will play a key role throughout the acquisition and development phases, working closely with cross-functional teams to ensure accurate, competitive, and optimized tooling cost estimations aligned with our program and business goals. Key Responsibilities Acquisition Phase Define the complete tooling package (in-house, bought-out parts, and assembly tools) per Program Management System (PMS) guidelines. Analyze the Bill of Materials (BOM) and process flow charts to build a detailed tooling list. Develop tooling concepts using CAD models, 2D drawings, and technical visuals (e.g., tool movements, inserts, cavities). Estimate tooling costs in alignment with the Tool & Equipment (T&E) strategy. Apply defined tooling margins and create pricing summaries in customer-specific (OEM) templates. Present and distribute cost breakdowns to internal stakeholders (Program Managers, T&E Buyers, etc.). Update and refine cost estimates across acquisition rounds, collaborating with Customer Business Units (CBUs). Contribute ideas to enhance FORVIA's competitiveness in project quotations. Development Phase Support Engineering and T&E Buyers with cost estimates for Engineering Change Requests (ECRs). During tooling RFQ (Request for Quotation) phases, calculate target costs based on part designs, technical specifications (IDS), and T&E strategies. Compare supplier cost breakdowns with TReC estimates during SNC (Supplier Nomination Committee) phases. Analyze gaps and provide justification or negotiation support to the Purchasing team. Maintain costing data for traceability and knowledge sharing post-nomination. Support tooling cost targets for engineering or program design changes. Cross-functional Collaboration Work closely with: CBU Cost Analysts (for both in-house and BOP parts), Central Costing Teams (to evolve TReC methodology), Global teams to ensure cost competitiveness and process alignment. Contribute to continuous improvement within the costing function by proposing innovative ideas and solutions. Your Profile Education & Experience Bachelor s or Master s degree in Engineering, or Diploma in Tool & Die Design. 6 10 years of experience in industrial environments, including exposure to production, tooling, or manufacturing engineering. Technical Skills Deep understanding of Injection Molding tools, post-processing tools (e.g., plastic welding, gauges, covering), and assembly processes. Familiarity with interior automotive components such as instrument panels, door panels, and center consoles. Knowledge of various supplier technologies is an advantage. Proficiency in interpreting CAD data and 2D technical drawings. Soft Skills Strong communication, analytical, and problem-solving abilities. Ability to synthesize complex technical data into actionable insights. Comfortable working cross-functionally and across international teams. Fluent in English (mandatory); basic knowledge of French or German is a plus. Global Impact: Work with a top-tier automotive supplier on industry-defining technologies. Innovation & Growth: Collaborate on high-impact projects and develop your career in a dynamic, global environment. Learning Culture: Access cutting-edge training through FORVIA University. Sustainability Leadership: Join a company committed to CO2 Net Zero and certified under the SBTi Net-Zero Standard. Inclusive Workplace: Thrive in a diverse, multicultural team that values collaboration and continuous improvement. Qualification : Bachelors or Masters degree in Engineering, or Diploma in Tool & Die Design

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

Job Title: Graphic Designer Location: Pune Experience: Minimum 3 Years Employment Type: Full-Time Reporting To: AGM Marketing Role Overview: We are seeking a creative and detail-oriented Graphic Designer with a passion for real estate marketing. This role involves conceptualizing, designing, and delivering high-quality visuals for print, digital, and on-ground branding. The ideal candidate should possess a strong design sensibility, proficiency in industry-standard tools, and the ability to transform marketing strategies into compelling visual stories that engage and convert. Key Responsibilities: 1. Creative Design & Visual Development Design brochures, flyers, hoardings, project presentations, and site branding materials. Create digital assets for social media, web banners, email campaigns, and WhatsApp creatives. Ensure brand consistency across all platforms, aligned with the company s visual identity. 2. Branding & Identity Design Develop brand identities for new real estate projects, including logos, typography, and color palettes. Design signage, event creatives, and customer-facing collaterals for project sites and marketing events. 3. Coordination & Execution Work closely with the marketing team to understand campaign objectives and deliver effective visual solutions. Coordinate with agencies, vendors, printers, and photographers for timely production and execution. Adapt designs for multiple formats and mediums (print, digital, large-format, etc.). 4. Presentation & Content Support Design investor decks, sales presentations, and pitch materials with engaging visual layouts. Collaborate with copywriters and marketing managers to enhance storytelling through visuals. 5. Real Estate-Specific Design Tasks Design formatted layouts for floor plans, master plans, and elevation renders (based on 3D inputs). Assist in preparing RERA-compliant ads, brochures, and statutory marketing materials. Maintain a centralized repository of all design assets and project creatives. Qualifications & Experience: Education: Bachelor s Degree or Diploma in Graphic Design, Visual Communication, Fine Arts, or a related field. Experience: Minimum 3 years of experience in graphic design, preferably within the real estate industry. Key Skills & Competencies: Technical Skills Proficiency in Adobe Creative Suite: Photoshop, Illustrator, InDesign (mandatory) Knowledge of CorelDRAW, Canva, and basic video editing using Premiere Pro or After Effects (preferred) Understanding of layout principles, color theory, typography, printing techniques, and brand consistency Familiarity with design specifications for digital and social media platforms Behavioural Skills Strong creativity and attention to detail Effective communication and teamwork Ability to manage multiple projects under tight deadlines Receptive to feedback and committed to continuous learning Self-motivated, organized, and quality-conscious Job Summary: As a Graphic Designer, you will play a key role in shaping the visual identity of our residential and commercial real estate projects. You will collaborate with the marketing team to bring campaigns to life through high-impact, brand-consistent designs that drive engagement and business growth. Your work will directly contribute to how the Tejraj Group is perceived across the market both online and offline. Qualification : Bachelors Degree or Diploma in Graphic Design, Visual Communication, Fine Arts, or a related field

Position: Sr. Engineer / Deputy Manager / Sr. Deputy Manager EIC Sales (Infra Projects) Experience: 3 8 Years Location: Pune Employment Type: Full-Time Role Overview We are seeking a results-oriented sales professional with experience in infrastructure projects and electronic industrial components. The ideal candidate will be responsible for developing government and contractor accounts, building strategic relationships, and driving sales growth through effective planning and execution. Key Responsibilities Maintain clear and consistent communication with the reporting manager; execute visit plans aligned with customer potential. Identify and develop a pipeline of prospective government departments and contractors through strategic account planning. Conduct regular sales calls to introduce products, applications, and new solutions to clients. Monitor and report on competitor activities, pricing strategies, and new product launches, sharing actionable insights with management. Develop and implement an annual sales plan aligned with company objectives and key customer accounts. Engage directly with government officials at all levels to promote products and solutions; distribute promotional materials and product literature. Provide timely and accurate reporting on daily activities, weekly plans, competitor actions, and market trends to support decision-making. Conduct technical sales calls, design consultations, and troubleshooting sessions with support from internal engineering teams. Coordinate high-impact visits and presentations to key accounts involving senior management. Propose innovative ideas to enhance sales meetings, client engagement, and training seminars. Ensure compliance with company policies, budgets, and standards of professionalism. Candidate Profile 3 8 years of experience in B2B or institutional sales, preferably with infrastructure or industrial electrical components. Strong understanding of government procurement processes and contractor relationship management. Strategic thinking with strong planning, reporting, and execution skills. Excellent communication and interpersonal abilities. Willingness to travel as required for client meetings and project discussions. Perks & Benefits Attractive performance-based incentives 5-day work week Flexible working hours

Tableau Architect Location: Pune Role Overview: We are looking for an experienced Tableau Architect to lead the design, development, and optimization of scalable data visualization solutions. The ideal candidate will bring deep expertise in Tableau, strong data architecture skills, and a passion for mentoring and guiding teams. You will play a pivotal role in delivering impactful analytics and ensuring best practices are followed across the organization. Key Responsibilities: Lead and mentor junior Tableau developers and analysts in Pune, fostering skill development and enforcing adherence to data visualization best practices. Architect, design, and implement scalable, high-performing Tableau dashboards and data models to support business analytics needs. Optimize Tableau environments to ensure efficient performance with large datasets and complex visualizations. Guide and support data integration efforts from diverse data sources into Tableau, ensuring data consistency and reliability. Conduct training sessions, hands-on workshops, and provide one-on-one mentorship to upskill team members. Collaborate with cross-functional teams including data engineers, business analysts, and IT to align on data and reporting requirements. Troubleshoot and resolve technical issues related to Tableau workbooks, data connections, and server performance. Create and maintain clear, user-friendly documentation for internal and external stakeholders, including architecture diagrams, user guides, and training materials. Technical Skills: Advanced proficiency in Tableau Desktop, Tableau Prep, and Tableau Server. Strong background in data modeling, ETL processes, and data architecture. Expertise in SQL and experience working with relational databases (e.g., SQL Server, Oracle). Hands-on experience in data integration from multiple sources and ensuring data quality. Proven ability to optimize dashboard performance for speed and responsiveness with large-scale datasets. Familiarity with cloud platforms such as AWS or Azure for data storage and analytics. Soft Skills & Additional Requirements: Experience in training and mentoring junior analysts, with a focus on building local talent in Pune. Excellent communication skills, especially when working with distributed and cross-functional teams. Strong problem-solving abilities to diagnose data and performance issues effectively. Commitment to producing high-quality documentation and reusable templates.

Job Title: Graphic Designer Job Summary We see graphic design as visual storytelling that engages, informs, and inspires. As a Graphic Designer, your role is crucial in developing creative designs that communicate the company s brand and vision. You will collaborate with various teams to produce visually compelling and brand-consistent materials across digital and print platforms. Key Responsibilities Lead and manage the design process from concept to final output. Collaborate with teams to understand project needs and develop effective design solutions. Create visuals for digital platforms, print materials, packaging, and marketing assets. Maintain a consistent brand identity across all design materials. Stay updated on design trends and emerging technologies. Review and refine designs based on feedback to ensure high quality. Work with the marketing team to create promotional graphics. Required Skills & Qualifications Bachelor s degree in Graphic Design, Visual Communication, or a related field. 6 months to 1 year of professional design experience. A strong portfolio showcasing creative and diverse design work. Proficiency in design tools such as CorelDRAW, Canva, and Photoshop. Good understanding of current design trends and visual best practices. Strong communication and collaboration skills. Attention to detail and ability to manage multiple projects. Qualification : Bachelors degree in Graphic Design, Visual Communication, or a related field.

Job Title: Content Writer Required Experience: 2+ Years Job Location: Pune (Work from Office) Educational Qualifications: A graduate degree in Communications, Marketing, English, Journalism, or a related field is preferred. Job Description: Zymr is seeking a skilled Content Writer to help drive our marketing initiatives. You will be responsible for transforming technical content into engaging narratives that connect with our audience. By finding opportunities to improve the customer journey, you will create compelling marketing materials that generate demand and build our brand presence. Key Responsibilities: Content Creation: Develop engaging, clear, and SEO-optimized content, including blogs, articles, website copy, and marketing collaterals. Support content needs for technical topics such as DevOps, AI, testing, cloud, and digital transformation. Content Support for Campaigns: Write engaging social media posts, email campaigns, and landing page copy. Collaborate with marketing teams to ensure content aligns with ongoing campaigns and is delivered on time. SEO & Best Practices: Write with SEO principles in mind, balancing keyword optimization and user experience. Understand audience personas to align content with their specific journeys and needs. Editing & Research: Research and simplify complex technical concepts for a global audience. Ensure content is error-free, well-structured, and consistent with Zymr s brand tone. Cross-team Collaboration: Work closely with designers, marketers, and subject matter experts (SMEs) to align content goals with larger campaigns and objectives. Requirements: 4+ years of experience in content writing, ideally within technology or software services. Strong command of American English and excellent storytelling skills. Familiarity with SEO principles, digital content trends, and audience-targeting strategies. Experience in writing both technical and business-oriented content. Ability to meet deadlines, multitask, and adapt to shifting priorities. Why Zymr: Join a high-growth technology services company with exciting opportunities. Make a real impact by creating content that influences global clients. Be part of a collaborative work culture with opportunities for skill enhancement and growth. Qualification : A graduate degree in Communications, Marketing, English, Journalism, or a related field is preferred.

Designation: Design Engineer Education: Diploma in Plastic Mould Technology / Tool & Die Making from CIPET, IGTR, GTTC, NTTF, or CITD. Experience: 1-2 years of experience in Mould Design or Tool Room. Job Location: Viman Nagar, Pune Preferred Joining: December 2024 Job Responsibilities: Understand mould design concepts and processes. Design hot runner accessories and systems. Review and interpret customer mould data. Interact with customers to finalize system designs. Create 3D and 2D system designs. Deliver project files within customer timelines. Manage design revisions based on customer feedback. Schedule systems for production. Collaborate with the production team during system manufacturing. Key Requirements: Basic understanding of injection moulding machines and processes. Knowledge of mould construction and basic mould design. Understanding of plastic engineering and manufacturing processes. Familiarity with geometrical dimensions, tolerances, steel materials, and heat treatment processes. Software Skills: Proficiency in SolidWorks (or similar CAD software). Experience in 3D modelling and 2D drafting. Technical Knowledge: Mould design and tooling expertise. Working knowledge of SolidWorks. Proficiency in English (reading, writing, and communication). General computer skills. Personal Attributes: Precision, flexibility, and a problem-solving mindset. Strong communication skills, with clear and professional written and verbal English. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve key industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance performance, functionality, and sustainability in their products and processes. With over 11,800 employees representing 93 nationalities, Oerlikon operates in more than 38 countries and across 207 locations worldwide. We value diversity, innovation, and excellence, making us a trusted partner globally.

Job Title: Senior Technical Consultant (ABAP/ODATA) Location: Pune, India Experience: 6 to 8 years Education: Bachelor's or Master s degree in Computer Science, Information Technology, or related fields About Tietoevry At Tietoevry, we help businesses realize their digital ambitions through innovative IT solutions, fostering efficiency, agility, and growth. As a trusted partner for organizations across industries and the public sector, we specialize in modernizing IT landscapes. Join us to work in a collaborative, inclusive, and innovation-driven environment where you can make a meaningful impact. Role Overview We are seeking an experienced Senior ABAP/ODATA Consultant to join our dynamic team in Pune. In this role, you will be responsible for the design, development, and implementation of ABAP and ODATA services within SAP S/4HANA environments. You will also play a critical role in troubleshooting, performance optimization, and supporting the technical integration with UI5 screens and other connected systems. Key Responsibilities Develop and maintain ABAP programs and ODATA services within SAP S/4HANA. Perform debugging and troubleshooting, especially in UI5 interfaces and integrated workflows. Design and implement SAP Workflows, ensuring seamless process automation. Develop and maintain Web Services, IDOCs, and system interfaces to support business processes. Implement and enhance SmartForms, customer exits, and enhancement frameworks. Collaborate with functional teams to understand requirements and provide technical solutions aligned with SD and MM modules. Independently manage assigned deliverables, ensuring adherence to timelines and quality standards. Document technical designs, configurations, and development processes comprehensively. Support performance optimization, root cause analysis, and continuous improvement initiatives. Required Skills & Experience 6 to 8 years of hands-on experience in ABAP development and ODATA service implementation. Proven expertise in S/4HANA environment. Strong understanding of debugging functionality from UI5 screens. Proficiency in developing and troubleshooting SAP Workflows. Experience working with Web Services, IDOCs, and interfaces. Hands-on experience with SmartForms, customer exits, enhancement techniques, and BADIs. Conceptual understanding of SD (Sales & Distribution) and MM (Materials Management) modules. Strong problem-solving and analytical skills. Excellent communication skills, with the ability to engage effectively with global teams and customers. Preferred Qualifications Exposure to Fiori/UI5 development is a plus. Experience with Agile methodologies and DevOps tools for SAP development. Ability to work independently and proactively in a global delivery environment. Opportunity to work in a global team with exposure to international projects. Professional development through continuous learning and certification opportunities. Collaborative and inclusive work culture based on trust, transparency, and respect. Work-life balance and flexible work arrangements. Diversity & Inclusion Commitment At Tietoevry, we believe that diversity, equity, and inclusion drive innovation and creativity. We welcome applications from candidates of all backgrounds, genders (m/f/d), and life experiences. Our open, inclusive, and collaborative culture empowers every individual to contribute and thrive. Qualification : Bachelor's or Masters degree in Computer Science, Information Technology, or related fields

Join the Entrata Team: Be a Part of Transforming Property Management Position: Back Office Executive Location: Pune, India / Remote At Entrata, we re not just rewriting the book on property management we re completely reimagining it. From our humble beginnings in 2003, created by visionary college students, we ve grown into a global leader in the property tech industry. Our award-winning software suite has revolutionized everything from rent payments to leasing, maintenance, insurance, and beyond. Today, we re proud to serve property owners, managers, and residents worldwide, and we need bright minds like you to help us grow. Who We Are: We re a diverse, innovative global team of 2200+ people across Utah, Texas, India, Israel, and the Netherlands. Whether you're in an office or working remotely, at Entrata, we believe in transparent communication, boldness, and excellence. Our commitment to reshaping the property management experience drives everything we do, and we re looking for driven professionals like you to join us on this exciting journey. What You ll Do: As a Back Office Executive, you will be at the heart of our operations, ensuring that the behind-the-scenes processes run smoothly. From data entry to analysis, your attention to detail and problem-solving skills will help Entrata maintain its high standards of efficiency and excellence. Data Mastery: Review, verify, and update source materials for accuracy. You ll enter and record data, update records, and keep things running efficiently. Process Improvement: Keep an eye on best practices, continuously improving processes and communicating changes to the team. Fast-Paced Execution: Meet key performance metrics like working hours, CPA, absenteeism, and defect rate. Deliver results even in a high-pressure environment. Collaboration & Communication: Keep the team informed and engaged. Regular updates, scrums, and emails ensure smooth communication across all departments. Trend Spotting: Dive deep into data, analyze trends, and generate insights that drive actionable results. You ll use your analytical skills to make sure we re on track. Project Ownership: Manage your own tasks and projects, balancing deadlines with quality execution. What You Bring: Education & Experience: A graduate in any field, with 1-4 years of back-office or corporate experience. Bill processing experience is a bonus. Attention to Detail: You re meticulous about accuracy and data integrity no detail goes unnoticed. Technical Skills: Basic proficiency with MS Office (Excel is a must) and computer operations. Advanced Excel skills will set you apart. Problem-Solving Mindset: You love diving into challenges, identifying solutions, and making an impact. Adaptability: You re a self-starter who thrives with minimal direction and can quickly adapt to new systems and changes. Team Player: You re a professional who works well independently and as part of a team. You bring your positive attitude and energy to everything you do. Communication Skills: Strong business communication skills in English (both written and verbal) are essential to your success. Shifts: Ready to work night shifts or even 24/7 if needed. Flexibility is key! Bonus Points For: Client Services: Experience in delivering value-added services to clients and businesses. Training: Ability to evaluate training needs and help improve soft skills and process understanding within the team. Advanced Excel & Testing: Advanced Excel skills, or certification in manual/automated testing, will be a bonus! Career Growth: A Be valued, Create value approach to personal and professional development. Work-Life Balance: Enjoy generous time off to care for yourself and your family. Health & Wellness: Access to world-class medical, dental, vision insurance, and life assistance programs. Financial Planning: Benefit from RSU equity programs, ESPP, retirement plans, and more! Work Environment: An ergonomic WFH setup, snacks, and a culture built around team collaboration. Global Impact: Be part of a company shaping the future of property management with cutting-edge software that s used by clients across the globe. At Entrata, we don t just believe in innovation we believe in people. We re a team that thrives on excellence, boldness, and the belief that diversity fuels creativity. If you re ready to join an award-winning team and make your mark on the property management industry, we want to hear from you! Qualification : Graduate in any Stream.

About Aera Technology Aera Technology is a leader in Decision Intelligence, helping enterprises operate more efficiently, intelligently, and sustainably. Our Aera Decision Cloud seamlessly integrates AI-driven innovations with enterprise systems to automate and enhance decision-making in real time. Product Marketing Manager (AI & IT) We are looking for a Product Marketing Manager with expertise in AI and IT to craft compelling narratives, engage CIOs, and showcase the transformative power of Decision Intelligence. In this role, you will translate complex AI capabilities into clear, impactful messaging that resonates with technical and business audiences. Key Responsibilities Define and execute an AI and IT-focused product marketing strategy. Develop product positioning, value propositions, and messaging. Create content that demystifies AI concepts and highlights Aera s capabilities. Collaborate with marketing and product teams to produce technical content and whitepapers. Design and execute data-driven marketing campaigns. Develop competitive comparison guides. Work closely with Product Management on product launches. Provide AI market insights for campaign strategies. Success Metrics Product revenue performance Win/loss rates Product pipeline and forecast accuracy Sales adoption of enablement materials About You 8+ years of experience in product marketing or customer-facing roles. Technical expertise in AI and IT, with knowledge of machine learning and automation. Strong storytelling and content development skills. Experience defining go-to-market strategies and executing data-driven campaigns. Ability to assess market trends and competitive positioning. Collaborative mindset with strong communication skills. Customer-centric approach to marketing. Preferred: MBA and a degree in Engineering, Computer Science, or Applied Sciences. Aera Technology fosters an innovative and inclusive work environment where employees thrive. We offer: Competitive salary and stock options Comprehensive benefits Professional development programs A flexible work environment Equal Opportunity Employer Aera Technology is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, veteran status, or disability status. Join us and help shape the future of Decision Intelligence! Qualification : MBA and a degree in Engineering, Computer Science, or Applied Sciences.

About this job As a Robotics Trainer, you will train school students in robotics concepts and applications. Design and deliver training programs on robotics principles, including programming languages such as Python and C++, and hardware platforms like Arduino and Raspberry Pi. Develop curriculum materials, hands-on exercises, and assessments to facilitate learning and skill development. Responsibilities Design and deliver engaging robotics workshops and training sessions for students of all ages and skill levels. Develop and adapt curriculum materials to meet the needs of diverse learners and educational settings. Provide guidance and support to students as they work on robotics projects, troubleshooting technical issues and fostering creativity and problem-solving skills. Skills Requirement Strong technical skills and knowledge of robotics platforms, programming languages (e.g., Python, C++, Java), and hardware components (e.g., Arduino, Raspberry Pi). Excellent communication and interpersonal skills, with the ability to engage and inspire students from diverse backgrounds. Passion for robotics education and a commitment to promoting STEM literacy. Qualification BTech in Electronics & Telecommunication / BSc in Electronics Qualification : BTech in Electronics & Telecommunication / BSc in Electronics