Job Title: 3D Modeler Plant Engineering (Third Party Contractual) Location: Vadodara Department: Engineering Employment Type: Contractual Experience Required: 5 7 Years Job Purpose: We are seeking a skilled 3D Modeler to support the development and maintenance of high-quality, intelligent 3D models for various projects, including the Polycarbonate Plant Relocation (D3 Project) and upcoming greenfield and brownfield expansions (Phenol, Cumene, IPA, CHN, Offsites & Utilities). This role involves integrating laser-scanned data with engineering inputs and existing documentation to generate models that support engineering, procurement, and construction workflows. Key Responsibilities: Develop and update detailed 3D models using AVEVA E3D, SmartPlant 3D (SP3D), and IDS Viewer. Integrate laser scan point clouds with P&IDs, equipment layouts, and isometrics to model existing and new plant infrastructure. Generate and extract piping layouts, isometrics, general arrangement (GA) drawings, and support drawings from 3D models in accordance with piping specifications and catalog data. Validate and update equipment, instrument, and line tagging in line with P&IDs, site data, and engineering documents. Produce 2D deliverables including equipment layouts, piping plans, cable tray layouts, and civil/structural GAs across multidisciplinary teams. Collaborate with EPCM partners, dismantling contractors, and site teams during model reviews and updates. Work with digital tool vendors (e.g., ASETS) to implement model enhancements and integrations. Assist in the preparation of area-wise MTOs, barcoding interfaces, and modular packaging documentation. Required Skills & Competencies: Proficiency in AVEVA E3D, SmartPlant 3D (SP3D), and IDS Viewer. Strong knowledge of piping specifications, including supports, insulation, and special components (e.g., strainers, steam traps, vents). Experience in equipment, structural, and electrical & instrumentation (E&I) modeling. Familiarity with laser-scanning techniques and transforming point cloud data into intelligent models. Ability to interpret P&IDs, isometric drawings, and equipment datasheets accurately. Competency in creating multi-disciplinary 2D deliverables from 3D models. Understanding of PMS/VMS systems and catalog-based modeling practices. Strong coordination and communication skills to work with cross-functional engineering teams. Educational Qualifications: Diploma / BE / B.Tech in Mechanical Engineering, Piping Design, or related technical field. Experience: 5 10 years of relevant experience in 3D modeling for petrochemical, chemical, or refinery projects. Minimum 3 years of hands-on experience with E3D or SP3D platforms. Prior exposure to laser-scanned model development, particularly in projects with limited or outdated documentation, is highly preferred. Role: 3D Modeler Plant Engineering (Contractual Assignment) Qualification : Diploma / BE / B.Tech in Mechanical Engineering, Piping Design, or related technical field

Job Title: Packaging Development Executive Location: Vadodara Experience: 8 10 Years Job Type: Full-time Role Overview We are seeking an experienced and innovative Packaging Development Executive to lead the end-to-end development of packaging solutions that align with product, brand, regulatory, and operational requirements. The ideal candidate will have a strong background in packaging design, material selection, supplier management, and cross-functional project execution. Key Responsibilities New Requirement Analysis Collaborate with internal teams (R&D, Marketing, Production) to gather and define packaging requirements for new and existing products. Evaluate feasibility of proposed packaging solutions based on technical specifications, product handling, regulatory compliance, and market needs. Design & Development Lead the design and prototyping of packaging materials, structures, and solutions. Select appropriate packaging materials that meet durability, sustainability, and cost-efficiency goals. Ensure packaging meets performance criteria such as protection, shelf appeal, and functionality. Collaborate with engineering and creative teams to ensure design integrity and manufacturability. Supplier Coordination & Procurement Identify, engage, and manage packaging vendors for material sourcing and custom development. Obtain quotations, negotiate pricing and lead times, and manage vendor relationships. Oversee development of packaging components, tooling, and fixtures ensuring quality and timely delivery. Vendor Compliance & Quality Evaluate and audit suppliers to ensure they comply with company quality standards and relevant regulatory guidelines. Address non-compliance or quality issues with corrective actions and improvement plans. Foster long-term, performance-based vendor relationships. Project Management Manage packaging development projects from concept through commercialization. Monitor timelines, deliverables, and coordinate with cross-functional teams to ensure smooth execution. Identify and resolve risks or bottlenecks affecting delivery or quality. Documentation & Reporting Maintain comprehensive records of packaging specifications, development processes, vendor communications, and compliance documentation. Generate regular reports on project progress, cost analysis, material performance, and supplier evaluations for internal stakeholders. Preferred Candidate Profile Bachelor's degree in Packaging Technology, Mechanical Engineering, Industrial Design, or a related field. 8 10 years of experience in packaging development, ideally within FMCG, pharmaceuticals, or consumer electronics. Strong understanding of packaging materials, manufacturing processes, and regulatory standards. Hands-on experience with 3D modeling/design software and prototyping tools is a plus. Excellent project management, communication, and negotiation skills. Strong analytical mindset with a problem-solving approach and attention to detail. Be part of a dynamic team driving innovation in product and packaging development. Opportunity to work with cross-functional departments and industry-leading vendors. Play a key role in delivering packaging solutions that enhance product value, sustainability, and customer experience. Qualification : Bachelor's degree in Packaging Technology, Mechanical Engineering, Industrial Design, or a related field

Sr. Design Engineer Job Summary : The Design Engineer will be responsible for creating detailed designs, specifications, and documentation for control panels that meet clients' specific requirements and industry standards. This role involves working closely with clients to understand their needs, project managers, electrical engineers, and technicians to ensure the successful implementation and integration of control panel designs into larger systems. Required Qualifications : BE/B.Tech in Electrical Experience : 5+ years No of Vacancy : 1 Responsibilities Prepare GA drawings, schematic/wiring diagrams, fabrication drawings, and termination drawings. Select appropriate switchgear for related panels, including PLC Panels, VFDs, MCCs, PCCs, APFCs, and custom-built panels based on performance, cost, and reliability considerations. Obtain customer approval for all prepared drawings to ensure alignment with project requirements. Delegate tasks effectively within the team to ensure project milestones are met. Lead and manage the team, providing training and guidance to junior members. Coordinate closely with Project Team, Clients and suppliers to ensure smooth project execution and delivery. Qualification : BE/B.Tech in Electrical

Job Title: Quality Control Trainee Location: Vadodara Experience: 0 1 Year Job Type: Full-time Role Overview We are looking for motivated and detail-oriented Quality Control Trainees to join our team. This entry-level position is ideal for fresh diploma graduates in mechanical or related fields who are eager to gain hands-on experience in quality control and inspection processes within a manufacturing environment. Key Responsibilities Perform visual and dimensional inspections of components using VMM (Video Measuring Machine) and other precision instruments to ensure compliance with quality specifications. Assist in new product development by providing feedback on design improvements, material selections, and quality compliance. Create and maintain accurate documentation for inspection processes, test protocols, and product evaluation reports, ensuring alignment with internal standards and industry regulations. Support Statistical Process Control (SPC) efforts by collecting production data and performing basic trend analysis to monitor quality and process stability. Contribute to process improvement initiatives by identifying quality-related issues and providing data-driven insights. Participate in Measurement System Analysis (MSA) activities to evaluate the accuracy, repeatability, and reproducibility of inspection equipment. Review and interpret engineering drawings, ensuring products meet dimensional and tolerance requirements. Assist in revising or updating technical drawings as part of product changes or improvements. Preferred Candidate Profile Diploma in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related discipline. Fresh graduates or candidates with up to 1 year of experience are welcome to apply. Basic understanding of engineering drawings and technical specifications. Familiarity with VMM or other precision measurement tools is a plus (training will be provided if needed). Proficiency in Microsoft Office tools (Excel, Word, etc.) for documentation and reporting. Strong attention to detail, willingness to learn, and ability to work as part of a team. A structured training and onboarding program to develop core QC/QA skills. Exposure to modern manufacturing practices and quality systems. Opportunity to grow into permanent roles in quality assurance, manufacturing, or product development. A collaborative work environment with experienced mentors. Qualification : Diploma in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related discipline

Mechanical Welder Experience: 3+ years Location: Vadodara, Gujarat Role & Responsibilities: We are seeking a skilled Mechanical Welder to join our team. The ideal candidate should possess hands-on experience with various welding and fabrication techniques and should be proficient with various hand tools and machines. Welding & Fabrication: Perform MIG welding and other welding techniques as required for different projects. Demonstrate strong fabrication skills for various mechanical components and assemblies. Machine Operation: Operate grinders and drilling machines effectively for different fabrication tasks. Ensure the proper use of hand tools for mechanical work and welding. Measuring & Quality Control: Understand and work with different measuring units and instruments to ensure precision in fabrication. Ensure that all welded and fabricated materials meet the required specifications and standards. Work Environment & Safety: Maintain a safe work environment by following all safety guidelines and protocols. Ensure that tools and equipment are used in a safe manner to avoid accidents and injuries. Inventory & Store Management: Visit local stores to purchase necessary materials and items as per project requirements. Ensure timely availability of required materials and supplies for fabrication and welding tasks. Requirements: Experience: Minimum 3+ years of hands-on experience in welding and fabrication, specifically with MIG welding. Education: ITI or equivalent qualification in a related field. Skills: Proficient in using hand tools for welding and mechanical tasks. Strong experience with MIG welding and a good understanding of welding techniques. Ability to handle grinding machines, drilling machines, and other mechanical tools. Knowledge of measuring instruments and ability to read and interpret technical drawings. If you have a passion for welding and fabrication and have the skills to ensure high-quality mechanical work, we encourage you to apply. Join our team and contribute to our success in creating top-notch mechanical components. Qualification : ITI or equivalent qualification in a related field.

Assembler Executive Location: Vadodara, Gujarat Experience: 1+ year Role Type: Full-time Role & Responsibilities: We are seeking a detail-oriented and skilled Assembler Executive to join our team. The ideal candidate will have a strong understanding of electronics assembly and troubleshooting, along with the ability to work with hardware components, tools, and diagnostic equipment. As an Assembler Executive, you will play a crucial role in assembling, inspecting, and ensuring the quality of electronic systems and subassemblies. Assembly of Electronics Components: Assemble subassemblies and systems, including POS (Point of Sale), computers, development boards, custom hardware items, following specifications and procedures. Use manufacturing tools such as screwdrivers and other hand tools to assemble various electronic parts. Electronics Troubleshooting: Basic hardware troubleshooting skills to diagnose and fix issues related to electronics hardware parts like RAM, SSD, motherboard, SMPS, Wi-Fi, etc. Use multimeters to measure and troubleshoot electrical components. Hardware Knowledge: Good understanding of the working of computer hardware parts, such as RAM, SSD, Motherboard, and SMPS. Basic knowledge of microcontrollers and microprocessors, and their functionalities in hardware systems. Quality Inspection: Inspect final products to ensure they meet the required quality and specification standards. Ensure products are assembled correctly, paying attention to wire colors, tabs, and electronic components. Documentation & Inventory Management: Maintain documentation for inventory and manufacturing orders within the system. Basic knowledge of Microsoft Office (Word, Excel, PowerPoint) and other operating systems (Windows, Android). Firmware Installation and Diagnostics: Install various types of firmware onto hardware components. Run diagnostics and identify any potential issues with assembled products. Understanding Electrical Terminology: Basic understanding of electrical terminology such as power, voltage, and current. Knowledge of DC and AC motors, their types, and the nature of supply. Team Collaboration & Communication: Work effectively with team members to ensure smooth assembly processes. Communicate technical issues and solutions with other team members and supervisors. Requirements: Experience: Minimum 1+ year of experience in assembly and troubleshooting of electronic hardware parts. Educational Qualifications: Diploma/B.Tech in Electronics & Communication, Electrical Engineering, Mechatronics, IC, or ITI. Skills: Assembly Skills: Ability to assemble various electronic components and subassemblies. Electronics Troubleshooting: Basic troubleshooting skills for hardware issues. Hardware Knowledge: Understanding of various electronic components such as RAM, SSD, motherboard, SMPS, and microcontrollers. Tools & Equipment: Proficient in using hand tools and multimeters. Firmware Installation: Basic knowledge of installing and running diagnostics on firmware. Documentation: Knowledge of basic documentation processes and inventory management. Communication: Strong verbal and written communication skills. If you are a hands-on individual with a passion for electronics and have the skills to troubleshoot and assemble electronic components, we encourage you to apply for this Assembler Executive role. Join our team and contribute to the development of high-quality electronic products. Qualification : Diploma/B.Tech in Electronics & Communication, Electrical Engineering, Mechatronics, IC, or ITI.

Job Description: PHP Developer - Lead Position: PHP Developer - Lead Experience: 3-4 years of overall experience, with 1-2 years in team leadership Location: Vadodara, Gujarat Employment Type: Full-time About the Role: We are looking for a highly skilled PHP Developer to join our team as a Lead Developer. The ideal candidate should have extensive experience in PHP development, with strong coding and problem-solving skills. As a lead, you will be responsible for mentoring and guiding team members, ensuring the successful execution of projects, and staying updated on the latest technology trends. Key Responsibilities: Software Development: Design, develop, and maintain PHP-based applications, following industry best practices for coding and software engineering. Team Leadership: Lead a team of developers, providing guidance, mentorship, and support. Ensure the team adheres to project timelines and quality standards. Requirement Gathering & Analysis: Work with clients or stakeholders to gather and analyze project requirements. Convert business needs into technical solutions. Project Execution: Oversee the successful execution of projects, ensuring that development milestones are met, and all issues are promptly addressed. Quality Assurance: Ensure that the code written by the team is optimized, secure, and follows best practices. Collaboration & Communication: Work closely with other developers, designers, and stakeholders to ensure the smooth execution of projects. Maintain good communication across teams and with clients. Continuous Learning: Stay up-to-date with the latest developments in PHP and web technologies to keep your skills sharp and relevant. Required Skills: PHP Fundamentals: Strong knowledge of PHP and its frameworks (Laravel, CodeIgniter, etc.) and experience with developing dynamic, database-driven websites. MySQL Database: Proficient in MySQL database management and optimization. Knowledge of designing and managing databases for high-traffic applications. Problem Solving & Coding Skills: Excellent problem-solving abilities and a passion for writing clean, efficient, and scalable code. Web Technologies: Prior experience with web technologies like HTML, CSS, JavaScript, and frameworks (e.g., React, Angular) is a plus. Mentoring & Leadership: Proven experience in leading and mentoring a development team, ensuring high-quality work and fostering a collaborative work environment. Communication & Interpersonal Skills: Strong verbal and written communication skills. Ability to collaborate with cross-functional teams and stakeholders effectively. Qualifications: Educational Background: A B.E./B.Tech/MCA in Information Technology, Computer Science, or Computer Engineering with a minimum of 60% aggregate in the preceding semesters. Experience: At least 3-4 years of overall experience in PHP development, with 1-2 years in a leadership or mentoring role. What We Offer: Collaborative Environment: Join a team that values innovation and teamwork. Work in an environment that encourages growth and development. Competitive Salary: A competitive salary, based on your skills and experience. Career Growth: Opportunities for career advancement and professional development. Work-Life Balance: Flexible working hours and a positive work culture that promotes work-life balance. If you are an experienced PHP developer with leadership skills and a passion for technology, we would love to hear from you. Apply today to join a dynamic and growing company! Qualification : A B.E./B.Tech/MCA in Information Technology, Computer Science, or Computer Engineering with a minimum of 60% aggregate in the preceding semesters.

Job Title: Supplier Quality Engineer Location: Vadodara, India Employment Type: Full-Time Job Family: Supply Chain Management About Schaeffler Schaeffler is a globally recognized technology leader whose success is built on a foundation of entrepreneurial spirit and a long-standing commitment to innovation. As a trusted partner to leading automobile manufacturers as well as key players in the aerospace and industrial sectors, Schaeffler offers exciting opportunities for professional growth and development. Key Responsibilities Supplier Assessment & Approval Conduct assessment and initial approval of suppliers based on quality and technology standards at both global and regional levels. Provide guidance to local Supplier Quality Engineers (SQE) to ensure smooth supplier onboarding and performance. Supplier Strategy Development Collaborate with Category Management Professionals to develop and implement qualitative and technology-specific supplier strategies. Ensure alignment of supplier development plans with business objectives. Supplier Quality Performance Improvement Drive reduction in supplier complaints through proactive monitoring, feedback, and corrective action implementation. Conduct supplier quality audits to assess performance and compliance with Schaeffler standards. New Product & Process Development Work closely with suppliers on new product introduction and process development, ensuring quality and technology alignment from the start. Supplier Selection & Approval Play a critical role in evaluating, selecting, and approving new suppliers to enhance Schaeffler s supply chain reliability and performance. Qualifications Education: B.E. / Diploma in Mechanical Engineering (DME) or equivalent. Experience: 10+ years of relevant experience in supplier quality management, supply chain management, or quality assurance within a manufacturing or automotive environment. At Schaeffler, we believe innovation thrives in an environment of mutual respect and diverse ideas. Our collaborative culture fuels creativity, allowing us to deliver cutting-edge solutions that drive sustainable value for our stakeholders and society. Together, we advance how the world moves. Qualification : B.E. / Diploma in Mechanical Engineering (DME) or equivalent.

Job Title: Quality Operator Location: Vadodara, India Employment Type: Full-Time Job Family: Quality/Testing About Schaeffler Schaeffler is a dynamic global technology company driven by its entrepreneurial spirit and a long history of private ownership. As a trusted partner to leading automotive manufacturers, aerospace companies, and industrial players, Schaeffler offers diverse career development opportunities in an environment that values innovation and collaboration. Key Responsibilities Machine Operation & Inspection Operate Flexi Test Machines and generate G-codes for parts. Inspect parts for burn marks and conduct further analysis as needed. Etching & Burn Analysis Perform etching processes to detect burn marks on components. Metallurgical Testing Conduct metallurgical tests on incoming materials in line with inspection plans and group standards. Chemical Testing Execute chemical testing for incoming materials following defined procedures and standards. Production Support Support production by verifying laser marking depth and assisting with internal complaints and customer complaint investigations. Participate in field failure part analysis related to metallurgical issues. Equipment Verification & Calibration Perform daily plausibility tests for hardness testers and spectrometers. Coordinate and maintain records of calibration activities. Continuous Improvement & Training Take part in improvement projects and training programs to enhance processes and skills. Qualifications Education: Diploma in Engineering (Mechanical/Metallurgy/Materials Science preferred) Experience: Minimum 3 years of experience in a quality testing role in the manufacturing or automotive industry. Skills: Strong analytical and problem-solving abilities. Clear and effective communication skills. At Schaeffler, we believe that diverse ideas and perspectives drive innovation and create a strong foundation for sustainable growth. We encourage collaboration, creativity, and continuous learning, making Schaeffler an exciting place to build your career. Qualification : Diploma in Engineering (Mechanical/Metallurgy/Materials Science preferred)

MRO Engineer Location: Vadodara Role Overview As an MRO Sales Engineer based in Vadodara, you will play a crucial role in driving business growth through proactive management of steam systems and instrumentation products. You will be responsible for comprehensive customer coverage within your assigned grid, conducting regular onsite inspections, health assessments, and detailed performance analyses of installed assets. Your focus will be on maximizing uptime by identifying operational issues, performing root cause analysis (RCA), and delivering tailored solutions that convert non-operational assets back to full functionality. Purpose of the Role To boost business performance by enhancing the operational efficiency and reliability of steam systems and instrumentation across the designated customer base. This role involves proactive customer engagement, thorough asset health monitoring, and solution-oriented strategies to ensure high uptime and customer satisfaction. Key Responsibilities Conduct regular, proactive onsite inspections of steam systems and instrumentation assets Generate detailed health mapping reports aligned with each inspection Develop and submit well-documented proposals based on asset assessments Maintain consistent client follow-up to convert assessments into confirmed orders Produce an average of 8-10 health mapping reports and offers weekly Organize training and knowledge-sharing sessions aimed at improving customer operation and maintenance practices Aim to achieve and sustain an asset uptime of 95% across the assigned grid Focus on steam system components and instrumentation products within the Steam System division Eligibility & Requirements Bachelor s degree in Mechanical Engineering 1-2 years of relevant experience in maintenance, repair, and operations or a related field Strong customer relationship and rapport-building skills Sharp observational skills with an objective, analytical mindset Ability to identify solutions and confidently drive initiatives to completion Effective selling and negotiation skills Knowledge of boilers, steam systems, and steam accessories Qualification : Bachelors degree in Mechanical Engineering

Sr. Project Engineer Job Summary : The Engineer will be responsible for managing and executing industrial automation projects from conception through to completion. This role involves working closely with clients to understand their needs, designing automation solutions using Siemens products, and overseeing the installation and commissioning of these solutions. The candidate must have a strong background in industrial automation, in-depth knowledge of Siemens automation products, and excellent project management skills. Required Qualifications : BE/B.Tech in Electrical, Electronics, Instrumentation, Mechatronics Experience : 3-5 years No of Vacancy : 4 Responsibilities Lead site services and commissioning activities to ensure successful project delivery. Develop and manage project schedules, ensuring effective planning and execution. Drive projects to completion with a focus on customer satisfaction. Oversee project documentation, maintaining accuracy and completeness. Delegate tasks within the team to optimize efficiency and meet deadlines. Provide training and mentorship to junior team members. Offer comprehensive service and site support to both team members and clients. Coordinate effectively with clients to ensure smooth project operations. Manage and facilitate Kick Off Meetings (KOM) to align project goals and expectations. Working Conditions This role may require travel to client sites, including industrial and manufacturing facilities. The Project Engineer must be able to work in a variety of settings, including office environments and on-site locations. Safety precautions must and will be taken seriously, especially when working in industrial settings. Qualification : BE/B.Tech in Electrical, Electronics, Instrumentation, Mechatronics

Power Electronics Engineer Experience: 2+ years Location: Vadodara, Gujarat Role & Responsibilities: We are seeking an experienced Power Electronics Engineer to join our team. The ideal candidate will have strong hands-on experience in the design, development, and selection of power electronics components and systems. Component Design & Selection: Design and select semiconductor components, cooling mechanisms, passive components, and protection circuits. Experience in AC-AC, AC-DC, DC-DC power conversion and motor driver/controllers. Expertise in Battery Management Solutions, LED drivers, and various power-related products. Power Electronics Development: Design and develop power electronics components like converters, inverters, filters, and battery chargers as per the specifications. Develop and verify digital and analog power electronics control hardware. Experience in designing power converters/inverters for Variable Frequency Drives (VFD) and harmonic solutions. Component Knowledge: Experience with electrical components such as temperature sensors, actuators, solenoids, motors, drives, batteries, contactors, and controllers. Understanding of analog circuits, protection circuits, and controller hardware is an advantage. Experience in magnetic design and selection of MOSFETs, IGBTs, and SCRs for high-power applications. Simulation & Circuit Design: Experience with circuit simulation tools like Matlab, PSIM, or LTspice. Experience in PCB layout design with high-voltage ranges (1kV functional). Safety & Compliance: Familiarity with typical safety norms and requirements for power converter systems. Understanding hardware-mechanical and hardware-software interfaces. Testing & Verification: Experience in using test equipment like CRO, Frequency Meters, Signal Generators, Power Supplies, Data Loggers, and Electronic Loads for system verification. Design Principles: Understanding of fundamental analytical equations and design principles for inductors and transformers. Knowledge of converter controls and specifications. Requirements: Experience: Minimum 2+ years of experience in power electronics design and development. Education: B.Tech / M.Tech in Electronics & Communication or Electrical Engineering or a related field. Skills & Knowledge: In-depth knowledge of power electronics components, design principles, and simulation tools. Hands-on experience with high-power designs and converters, inverters, and control systems. Strong analytical and problem-solving skills. If you have a strong passion for power electronics and the expertise to design and develop high-quality power systems, we encourage you to apply. Join our team and contribute to the innovation and development of cutting-edge power solutions. Qualification : B.Tech / M.Tech in Electronics & Communication or Electrical Engineering or a related field.

Robotics Engineer Experience: 2+ years Location: Vadodara, Gujarat Role & Responsibilities: We are seeking a highly skilled Robotics Engineer to join our team. The ideal candidate will have hands-on experience in designing, developing, and optimizing robotic systems, and will be proficient in integrating them with existing systems. The responsibilities will include: Research & Design: Conduct research to determine the parameters and specifications of a robotic application. Design robotic systems from concept to completion, ensuring integration with existing systems as needed. Design and develop robotic arms, mechanical mechanisms, electromechanical systems, and electrical systems based on project requirements. System Integration & Optimization: Integrate robotic systems with other technologies and optimize the functionality of robotic systems post-deployment. Develop cost-effective processes for producing robotic systems and ensure efficient production. Documentation: Create comprehensive documentation for all robotic systems, including design specifications, manuals, and maintenance instructions. Monitoring & Improvement: Monitor the use of robotic systems in real-time and make adjustments as needed to improve their performance and reliability. CAD/CAM Expertise: Utilize CAD/CAM software to create detailed designs and prototypes for robotic systems. Use tools and perform mechanical tasks like soldering, welding, and metal cutting with precision. Software & Algorithm Development: Work on implementing ROS packages and algorithms for mapping, localization, sensor fusion, and navigation. Develop multi-threaded applications and work with technologies like Simultaneous Localization and Mapping (SLAM) and Virtual SLAM (VSLAM). Implement and work with Light Detection and Ranging (LIDAR) technologies. Electrical & Communication Knowledge: Extensive knowledge of electrical wiring, computer software engineering, and IO communication with different peripheral devices. Ability to work with communication systems between devices and robotic systems. Requirements: Experience: Minimum 2+ years of experience in the robotics field, with a focus on robotic system design, development, and integration. Education: Diploma or B.Tech in Electronics & Communication, Electrical, or Mechatronics. Skills & Knowledge: Excellent knowledge of CAD/CAM software. Well-versed in robotics, including ROS, SLAM, VSLAM, and LIDAR technologies. Strong mathematical and problem-solving abilities. Ability to use tools for soldering, welding, and metal cutting with precision. Experience working on multi-threaded applications and software development for robotics. Knowledge of electrical wiring and IO communication with peripheral devices. If you have a strong background in robotics and a passion for designing and developing cutting-edge robotic systems, we encourage you to apply. Join our team and contribute to building innovative and efficient robotic solutions. Qualification : Diploma or B.Tech in Electronics & Communication, Electrical, or Mechatronics.

PCB Design Engineer Location: Vadodara, Gujarat Experience: 4+ years Role Type: Full-time Role & Responsibilities: We are seeking a highly skilled PCB Design Engineer to join our dynamic team. The ideal candidate will have a strong background in PCB design, electronics, and electrical systems. As a PCB Design Engineer, you will be responsible for designing and developing PCB layouts, ensuring optimal component placement, and troubleshooting electronic circuits. PCB Design & Layout: Develop detailed PCB layouts, perform component placements, and determine wire routings. Create libraries for PCB designs, ensuring that all components used in designs are appropriately represented. Work with PCB manufacturers to ensure design feasibility and communicate specifications. Schematic Creation & Documentation: Create schematic symbols and ensure proper documentation for all PCB designs. Prepare documents for PCB assembly, including test documentation and BOMs (Bill of Materials). Write electrical parameters and specifications for PCB design (Gerber generation, stencils). Design Troubleshooting & Problem-Solving: Analyze and resolve any design-related issues in PCB layouts and circuit functionality. Troubleshoot and debug electronic circuits and resolve any performance or design issues. Thermal & Transmission Line Analysis: Perform thermal analysis of PCB designs and ensure the layout supports heat dissipation. Analyze and design transmission lines in PCBs to ensure signal integrity. Product Development & New Design: Lead new product development and evaluate driver development. Collaborate with cross-functional teams to ensure all designs meet electrical, mechanical, and functional requirements. Manufacturing Support & Collaboration: Prepare the necessary documents for PCB manufacturing and ensure the timely completion of BOMs and drawings. Coordinate with PCB manufacturers to ensure smooth fabrication and assembly processes. Support the PCB assembly process, including understanding SMD, through-hole, and BGA technologies. Provide input for PCB assembly and troubleshooting. Test & Measurement: Have a basic understanding of test and measurement equipment used for PCB testing. Perform quality checks and validation of PCB assemblies and components. Requirements: Experience: 4+ years of experience in PCB design, including component selection, layout, and troubleshooting. Experience with PCB design software (e.g., Altium, Eagle, KiCad, etc.). Educational Qualifications: B.Tech/M.Tech in Electronics & Communication or Electrical Engineering. Skills: Strong knowledge of electronics fundamentals, including an understanding of electronic components and systems. In-depth knowledge of PCB layout, schematics, component packages, and sizes. Expertise in PCB thermal analysis and understanding of transmission line theory in PCB design. Strong background with through-hole, SMT, and BGA technologies. Experience in PCB assembly, soldering techniques for both through-hole and SMD components. Strong troubleshooting, problem-solving, and circuit development skills. Excellent written and verbal communication skills. If you have a passion for electronics and PCB design, and are looking for an exciting opportunity to contribute to cutting-edge technology, apply now to join our team as a PCB Design Engineer. Qualification : B.Tech/M.Tech in Electronics & Communication or Electrical Engineering.

Job Title: Maintenance Engineer Transformers Business Location: Vadodara, India Company: Hitachi Energy About Hitachi Energy: Hitachi Energy is a global leader in sustainable energy technologies, transforming energy systems to deliver social, environmental, and economic value. Our Transformers Business Unit (BU) leverages diverse and innovative technologies to enable a sustainable energy future for generations to come. Our portfolio includes power transformers, traction transformers, insulation and components, digital sensors, and transformer services, which are deployed across power generation, transmission, distribution, and various other industries, such as metals, mining, oil & gas, commercial infrastructure, and mobility. With the energy grid becoming increasingly complex, transformers play a vital role in enhancing power quality and network management. Hitachi Energy is advancing the digitalization of transformers through our TXpert Ecosystem, pushing the boundaries of innovation and sustainability. We are seeking a Maintenance Engineer to join our team. If you thrive in a dynamic and fast-paced environment, have the ability to multitask, and are adaptable to business needs, we encourage you to apply. Role Overview: The Maintenance Engineer will be responsible for overseeing the execution of breakdown maintenance, preventive maintenance, and planned maintenance for equipment used in the transformer manufacturing production lines. This role requires managing technical documentation, resolving equipment issues, and optimizing operational performance while ensuring a safe and efficient work environment. Key Responsibilities: Maintenance Operations: Oversee breakdown maintenance, preventive maintenance, and planned maintenance of equipment in the transformer manufacturing production lines. Solve major technical and equipment issues to improve the performance and reliability of production lines. Maintain tools and equipment to ensure they remain in optimal working condition. Documentation & Reporting: Keep technical documentation of equipment up to date and accurate. Propose and implement improvement projects aimed at reducing both ordinary and extraordinary maintenance needs. Emergency & Troubleshooting: Respond promptly to emergencies, breakdowns, and malfunctions, minimizing disruptions to the production process. Monitor progress against the maintenance plan, identifying and resolving operational issues to maintain smooth operations. Safety & Compliance: Implement health, safety, and environmental guidelines to ensure the safety of people and resources within the workplace. Collaboration & Continuous Improvement: Work closely with the production team to define maintenance plans for equipment and suggest ways to improve equipment reliability, maintainability, and safety. Contribute to improving the efficiency and energy optimization of the manufacturing process. Key Performance Indicators (KPIs): Focus on key performance indicators such as machine availability, Overall Equipment Efficiency (OEE), Mean Time to Repair (MTTR), Mean Time Between Repairs (MTBR), and energy management. Living Core Values: Uphold Hitachi Energy's core values of safety and integrity, ensuring responsibility for your actions and caring for colleagues and the business. Qualifications and Experience: Education: Diploma or Degree in Electrical Engineering. Experience: Minimum of 3-5 years of experience in maintaining plant machinery, preferably in a transformer manufacturing or continuous processing plant. Familiarity with hydraulic and pneumatic systems, vacuum pumps, EOT cranes, drying ovens, and winding machines. Skills: Strong understanding of electrical equipment drawings and operation, including power and control circuits. Proficiency in both spoken and written English is required. Join us at Hitachi Energy and help drive the transformation of the energy landscape. Be part of a team that is committed to innovation, sustainability, and safety. Qualification : Diploma or Degree in Electrical Engineering.

Job Title: Logistics Executive Location: Vadodara Department: Supply Chain Management Experience Required: 3 5 Years Employment Type: Full-time Role Objective: To effectively manage outbound logistics operations by ensuring on-time deliveries, optimizing transportation costs, and coordinating with internal departments and external partners. The role demands a strong understanding of logistics processes, regulatory compliance, and data-driven decision-making to support operational efficiency and business growth. Key Responsibilities: Assist the Lead Logistics in implementing outbound logistics strategies. Coordinate all logistics activities including transportation, freight forwarding, import/export, and overall freight management. Monitor logistics performance to ensure uninterrupted and cost-effective material movement. Audit freight bills for accuracy and ensure compliance with contractual terms and internal controls. Work closely with internal teams Operations, Engineering, Security, Marketing for seamless loading and unloading. Engage and negotiate with suppliers, transporters, and customers to optimize logistics cost and improve efficiency. Analyze logistics and transportation data to recommend cost-saving opportunities. Track inbound/outbound truck movements and ensure material dispatches align with inventory and production plans. Ensure all shipments are documented correctly with ERP codes and material details. Address and resolve any logistics issues such as missed pickups, route errors, or documentation gaps promptly. Key Performance Indicators (KPIs): Turnaround Time (TAT) On-Time In-Full (OTIF) Deliveries Transportation Cost Savings (%) Logistics Cost as a % of Sales (Month-over-Month, Year-over-Year) Billing Accuracy Stakeholder Interactions: Internal: Stores Procurement Production External: Transporters Vendors Qualifications & Experience: Education: Graduate in any discipline Experience: 3 5 years in logistics, transportation, or supply chain management Geographical Knowledge: In-depth knowledge of Indian transportation routes, hubs, and freight corridors Required Exposure: Inventory Management Practices Internal & External Logistics Audits Preferred Exposure: Contract and Vendor Negotiation Inventory Control Systems (LIFO/FIFO) Skills & Competencies: Strong understanding of invoicing, freight auditing, and compliance standards (domestic & international) Familiarity with ERP systems and inventory tracking Knowledge of taxation, permits, documentation, and classification of goods (slow, fast, non-moving) Proficient in MS Office and logistics-related automation tools Ability to manage multiple stakeholders and prioritize under pressure Analytical mindset with data interpretation skills to support process improvement Working knowledge of production and warehouse operations Qualification : Graduate in any discipline

Job Title: SAP ABAP Developer Location: Vadodara Department: IT Services Employment Type: Permanent Experience Required: 3 4 Years Role Summary: We are looking for a skilled SAP ABAP Developer with 3 4 years of experience to join our IT team. The ideal candidate will be responsible for designing, developing, and supporting custom SAP solutions that align with evolving business needs. You will collaborate closely with functional teams and stakeholders to ensure seamless integration and performance across SAP platforms including SAP ECC, S/4HANA, Fiori, and CPI. Key Responsibilities: Design, develop, test, and maintain SAP ABAP programs, reports, enhancements, forms, and interfaces. Collaborate with functional consultants and end-users to gather and analyze requirements. Debug and troubleshoot existing programs to resolve issues and improve performance. Develop custom workflows and perform data migration/conversion using ABAP. Work across SAP modules and platforms: SAP ECC, S/4HANA, Fiori, UI5, CPI, and API integrations. Ensure code quality and documentation standards are followed. Provide technical support during SAP implementations, upgrades, and post-go-live support. Stay updated with SAP trends, ABAP best practices, and new technologies to continuously improve solutions. Technical Skills: Strong command of ABAP programming with proven hands-on experience. Expertise in SAP data models, tables, and performance optimization. Proficient in SAP Smart Forms, SAPscript, and report development. Hands-on experience with SAP Fiori, UI5, and OData services. Knowledge of enhancement techniques (e.g., User Exits, BAdIs). Experience working with SAP S/4HANA environments is essential. Familiar with SAP integration tools and working on REST APIs and CPI. Understanding of SAP security concepts related to development. Soft Skills: Strong analytical and problem-solving mindset. Excellent communication and collaboration skills. Detail-oriented with a commitment to delivering high-quality solutions. Self-motivated and adaptable to evolving technologies. Team player with the ability to work independently when required. Qualifications: Bachelor s degree in Computer Science, Information Technology, or related discipline. SAP ABAP certification is mandatory. If you're passionate about SAP development and eager to work on modern enterprise-grade systems, we d love to hear from you. Qualification : Bachelors degree in Computer Science, Information Technology, or related discipline

Job Title: Java Developer Location: Vadodara Department: IT Services Employee Type: Permanent Experience Required: 3 6 Years Reporting To: Assistant General Manager IT Services Position Overview: We are seeking a highly motivated and skilled Java Developer to join our IT Services team in Vadodara. The ideal candidate will have 3 6 years of hands-on experience in Java development, with a strong understanding of application design, development, and deployment. You will work collaboratively with cross-functional teams to deliver robust, scalable, and efficient software solutions. Educational Qualification: Bachelor s degree in Computer Science, Information Technology, or a related field. Key Responsibilities: Develop high-quality Java applications using Core Java and Spring Framework (Boot, MVC, Data, Security). Design and build RESTful APIs and web services. Participate in the full software development lifecycle (SDLC) including planning, development, testing, and deployment. Write efficient, testable, and maintainable code. Work with SQL/NoSQL databases and ORM frameworks like Hibernate/JPA. Perform unit and integration testing. Collaborate with QA and frontend teams to ensure seamless integration and delivery. Participate in code reviews and follow coding standards. Troubleshoot and debug application issues in a timely manner. Contribute to technical documentation and support deployment activities. Engage in Agile/Scrum development practices. Utilize tools such as Postman, Git/SVN, and CI/CD pipelines. Technical Skills: Proficient in Java SE/EE, OOP concepts, and core features like collections, exceptions, multithreading, I/O, lambdas, streams. Experience with Spring Boot, Spring MVC, Spring Security, Spring Data JPA. Good knowledge of Hibernate/JPA for ORM. Strong understanding of API design principles; experience with Postman and Swagger/OpenAPI. Basic knowledge of frontend technologies: HTML, CSS, JavaScript. Familiarity with CI/CD tools like Jenkins or GitLab CI. Exposure to Docker, containerization, and Kubernetes is a plus. Experience with version control systems: Git/SVN. Familiarity with Agile methodologies, SDLC, and TDD. Behavioral Competencies: Problem-Solving & Analytical Thinking Breaks down complex problems into manageable solutions. Approaches issues logically and resolves bugs efficiently. Team Collaboration Works effectively in cross-functional teams. Shares knowledge and supports colleagues. Communication Skills Communicates clearly with both technical and non-technical stakeholders. Documents work thoroughly. Accountability & Ownership Takes full responsibility for deliverables. Meets deadlines and follows through on commitments. Adaptability & Learning Agility Embraces new tools and changing requirements. Eager to upskill and adopt new technologies. Attention to Detail Writes clean, reliable code. Considers edge cases and ensures test coverage. Time Management & Prioritization Balances multiple tasks effectively. Prioritizes based on urgency and business value. Initiative & Proactivity Proactively identifies risks or areas for improvement. Contributes ideas to enhance codebase and processes. Customer/End-User Focus Understands user needs and business impact. Builds applications with usability and performance in mind. If you're passionate about coding, enjoy solving real-world challenges, and want to grow in a dynamic environment we d love to have you on board. Qualification : Bachelors degree in Computer Science, Information Technology, or a related field

Corporate Account Manager Location: Vadodara Experience: 1 - 3 Years Openings: 1 About the Role: As a Corporate Account Manager, you'll be a key player in expanding our life insurance footprint within designated HDFC Bank branches. Reporting to the Territory Sales Manager, your primary focus will be to support the sales of life insurance products to bank customers, fostering strong alliances with bank staff, and ensuring that business targets are not just met, but exceeded. This is a hands-on role where your ability to collaborate, motivate, and manage relationships will directly contribute to our success. What You'll Do: Drive Sales & Achieve Targets: Boost Performance: Increase wallet share for life insurance products within assigned HDFC Bank branches, focusing on a profitable product mix. Target Achievement: Consistently meet and surpass business targets for Annualized New Premium (ANP), case count, active branches, active sales staff, and other key performance indicators (KPIs). Strategic Partnership: Work collaboratively with Branch Managers to develop and execute effective business implementation plans. Empower Bank Teams: Motivate and support bank branch staff and Relationship Managers (RMs) in logging applications and actively participating in sales. Customer Engagement: Proactively identify and engage with the right customer database within the branch and conduct joint sales calls with bank teams to achieve shared business goals. Build Pipeline: Prospect and meet customers both within and outside the branch as required. Planning & Execution: Develop and implement effective short-term and long-term sales strategies. Cultivate Strong Relationships: Channel Partner Excellence: Manage and nurture the relationship between our internal teams and HDFC Bank as a channel partner, ensuring seamless collaboration and responsiveness. Brand Ambassador: Act as the face of our company, providing comprehensive support to the channel partner. Marketing & Service: Effectively execute all marketing activities tailored to the partner's requirements and ensure prompt post-sales service across all domains. Customer & Portfolio Management: Adhere to customer touch-point engagement to service your portfolio of customers and maintain the desired persistency ratio. Strategic Alignment: Interact closely with bank RMs to strategize and execute business plans. Ensure Compliance & Reporting: Process Adherence: Uphold strict adherence to internal sales processes, compliance standards, and our company's code of conduct. Knowledge Hub: Be a product and process champion, ensuring policies and procedures are followed to cultivate a strong compliance culture. Reporting: Provide timely and accurate reports to your supervisor as required and adhere to the training roadmap. What We're Looking For: Experience: 1 to 3 years of proven sales experience, preferably within the Banking, Financial Services, and Insurance (BFSI) sector, or a similar customer-facing sales role. Education: A Graduate degree from a recognized institution. Skills & Competencies: Sales Acumen: Strong understanding of sales processes, business planning, and achieving targets. Product Knowledge: Ability to quickly grasp and articulate product/subject matter expertise within the finance/insurance industry. Exceptional Communication: Fluent in English and the local language (Gujarati), with strong interpersonal skills to build rapport and influence effectively. Relationship Building: Proven ability to establish and maintain strong professional relationships with internal and external stakeholders. Problem-Solving & Decision Making: Resourceful in addressing challenges and making informed decisions. Teamwork: A collaborative mindset, working effectively with bank sales and operations teams. Self-Management: Highly organized, proactive, and able to manage a dynamic work environment. Qualification : A Graduate degree from a recognized institution

React Native Developer Location: Vadodara, Gujarat Job Type: Full-Time Experience: 1 3 years We re looking for a skilled and passionate React Native Developer to join our team in Vadodara. If you re excited about building high-performance mobile applications that work seamlessly across platforms, and you're driven by innovation and user experience, this opportunity is for you. Qualifications: Proven experience as a React Native Developer or in a similar mobile development role. Proficient in JavaScript, React, and React Native frameworks. Experience with state management libraries such as Redux or Context API. Familiarity with mobile development best practices and UI/UX principles. Strong understanding of RESTful APIs and asynchronous programming. Comfortable with version control systems like Git. Excellent problem-solving, debugging, and communication skills. Key Responsibilities: Mobile App Development Build and maintain cross-platform mobile apps for iOS and Android using React Native. Work closely with designers to implement beautiful, user-centric interfaces that align with project goals. Code Quality & Optimization Write clean, scalable, and maintainable code with performance and responsiveness in mind. Conduct and participate in code reviews to ensure high-quality development standards. API Integration Integrate mobile applications with RESTful APIs and third-party services. Ensure smooth and secure data flow between the client side and backend systems. Testing & Debugging Identify, track, and fix bugs and performance issues. Collaborate with QA teams to ensure smooth, high-quality app releases. Cross-Platform Consistency Ensure a consistent user experience across different devices and operating systems. Stay up to date with the latest trends, technologies, and updates in mobile development. Team Collaboration Collaborate with product managers, backend developers, and designers throughout the development lifecycle. Contribute to brainstorming sessions and propose innovative ideas for new features or improvements. Preferred Skills: Experience with native development (iOS/Android) is a strong plus. Familiarity with CI/CD pipelines and automated testing. Contributions to open-source projects or an active GitHub portfolio. Work on exciting and meaningful mobile app projects. Be part of a collaborative, innovative, and tech-driven environment. Great opportunity to grow your skills, take ownership, and shape digital experiences. If you re ready to create high-performing, cross-platform mobile apps and bring great ideas to life, apply today and join our growing development team!