Circuit Assembly Jobs in Coimbatore

Position: Technician Assembly (Air Intake) Location: Coimbatore Department: Assembly Air Intake Employee Type: Staff Purpose of the Role Execute **assembly activities for metallic parts** as per daily production plan. Ensure responsiveness to customer needs and **timely delivery**. Maintain quality standards to achieve **zero-defect output**. Optimize **resource utilization**, including materials, tools, and machinery. **100% adherence to standard operating procedures (SOPs)** for defect-free component delivery. Key Responsibilities & Accountabilities Assembly Operations & Quality Execute assembly tasks for **on-time delivery of defect-free products**. Follow assembly processes and **suggest improvements** for quality, delivery, and cost reduction. Maintain **Cost of Poor Quality (COPQ)** within acceptable limits. Analyze and resolve customer complaints using **QC story methodology**. Execute daily workloads, adhering to **cycle times**. Collect **BOM parts** and verify against router & MTS for operations. Manufacture **FAI and production parts with 100% quality**. Perform **Bush & Helicoil, pin installation**, and other specialized assembly operations. Training & Supervision Guide and provide **on-the-job training** to fresh technicians to improve skill levels. Track operator performance, provide feedback, and drive **continuous skill development**. Equipment & Tools Management Ensure machines and tools are **functioning correctly** to meet production targets. Follow assembly work instructions using **pneumatic hand tools and cutting tools**. Maintain knowledge of **consumables specifications**, preparation, application, shelf life, and expiry. Check **jigs & fixtures calibration** before starting work. Ensure inspection parameters are adhered to as per MTS, recording in **SIR reports** with calibrated instruments. Process & Systems Compliance Update **ERP** with stage completion after finishing work order operations. Achieve **OLE (Work Order Scanning) above 90%** as planned. Follow **PPE guidelines**, identify **near-miss incidents**, and implement monthly **Kaizen initiatives**. Continuous Improvement & Learning Collaborate with the automation team to identify use cases and implement **process improvement initiatives**. Stay updated on latest technologies and tools in assembly; suggest and implement them where applicable.

Job Title: Technical Manager Electronics NPD Quality Department: ETG Location: Coimbatore Experience Required: 10 15 Years Education: B.E / B.Tech in ECE, EEE, or EIE M.E / M.Tech in ECE, EEE, or EIE Job Summary: We are seeking an experienced and detail-oriented Technical Manager Electronics NPD Quality to lead quality assurance activities for instrument clusters and driver information systems. The ideal candidate will ensure robust implementation of automotive quality standards throughout the product development lifecycle, serve as a key liaison with customers, and drive continuous improvement in product and process quality. Key Responsibilities: Act as the primary point of contact for customer quality concerns, managing complaints, identifying root causes, and ensuring effective resolution. Oversee and implement quality systems including APQP, PPAP, and core tools, ensuring compliance with automotive industry standards. Perform detailed root cause analysis (RCA) and implement corrective and preventive actions for issues arising during new product development (NPD). Apply quality methodologies such as 7QC Tools, 8D, and structured problem-solving techniques to improve product quality and reliability. Collaborate with cross-functional teams (CFTs) and customers to ensure smooth and successful new product introductions (NPIs) for electronic displays and clusters. Ensure design quality by enforcing best practices such as Design for Manufacturability (DFM) and Design for Assembly (DFA). Lead failure analysis and circuit troubleshooting for PCBAs and electronic components during development and validation phases. Support hardware and software validation, with specific focus on instrument clusters and driver information system technologies. Maintain a strong customer-centric mindset, aligning quality deliverables with customer expectations and program milestones. Technical Skills & Requirements: Proven expertise in NPD Quality Systems, including APQP, PPAP, IATF 16949, and the 5 Core Tools. Deep understanding of instrument cluster and driver information system technologies. Strong background in failure analysis, circuit analysis, and electronic troubleshooting. Hands-on experience in software and hardware validation of automotive electronics. Familiarity with DFM, DFA, and product integration into automotive dashboards. Excellent communication and interpersonal skills with a demonstrated ability to manage customer quality expectations effectively. Strong analytical and problem-solving skills, with a structured approach to quality improvement initiatives. Qualification : M.E / M.Tech in ECE, EEE, or EIE

Job Title: Case Assembly PED Engineer Company Name: Titan Job Type: Full-Time Job Category: Watches & Wearables-ISCM Department: Engineering Location: Coimbatore, Tamil Nadu, India Additional Parameters: Titan, a leading manufacturer of watches and wearables, is seeking a highly skilled and motivated Case Assembly PED Engineer to join our team in Coimbatore, Tamil Nadu, India. As a Case Assembly PED Engineer, you will be responsible for overseeing the assembly process of our watch cases, ensuring the highest quality standards are met. Key Responsibilities: - Oversee the assembly process of watch cases, including monitoring and maintaining production schedules, ensuring timely delivery of products - Collaborate with cross-functional teams, including design, production, and quality control, to ensure smooth and efficient production processes - Conduct regular quality checks to ensure all watch cases meet our strict quality standards - Troubleshoot and resolve any issues that may arise during the assembly process - Develop and implement process improvements to increase efficiency and reduce waste - Train and mentor junior engineers and production staff on assembly processes and procedures - Stay updated on industry trends and advancements in watch case assembly techniques and technologies Qualifications: - Bachelor's degree in Mechanical Engineering or a related field - Minimum of 3 years of experience in watch case assembly or a similar role - Strong knowledge of assembly processes and techniques, particularly in the watch industry - Experience with quality control and assurance processes - Excellent problem-solving and troubleshooting skills - Strong communication and interpersonal skills - Ability to work independently and in a team environment - Willingness to work flexible hours and travel as needed If you are a highly motivated and skilled engineer with a passion for watches and wearables, we want to hear from you! Join our dynamic team at Titan and be a part of creating high-quality products that our customers love. Work Experience Job RequirementsEducationAny Graduation in a reputed Inst.Relevant Experience1~2 Years of exp. In Manufacturing/ AssemblyBehavioural SkillsCustomer orientation People management Drive for outputs Accountability KnowledgeLanguages known Tamil & English Understanding of SAP Case Assembly process knowledge Knowledge in AutoCAD Design knowledge on Watch case components Knowledge on Ms office / Excel / Word Good Communication Skills Qualification : Bachelor's degree in Mechanical Engineering or a related field

Position: Technician Sheet Metal Location: Coimbatore Department: Sheet Metal Value Concept Forming Employee Type: Staff Job Overview We are seeking a skilled and detail-oriented Sheet Metal Technician with experience in **blacksmithing** to join our team. The ideal candidate will be proficient in metal shaping, forging, and processing, with strong technical knowledge of **furnaces, welding, and metalworking tools**. Key Responsibilities Furnace Operation: Operate furnaces and metal heating equipment to achieve desired metal temperatures. Shaping & Forging: Shape and forge metal using anvils, blacksmithing hand tools, and power tools. Welding: Perform welding and join metals accurately. Preparation: Measure and prepare metals for heating and processing. Material Selection: Select and apply appropriate filler metals as needed. Monitoring: Monitor furnace operations to prevent damage and maintain consistent temperature. Smithing Techniques: Apply smithing techniques for shaping and forming metals. Safety & Maintenance: Load and handle raw materials into furnaces safely. Maintain and operate machinery while following safety protocols and wearing protective gear. Quality Control: Ensure metal processing aligns with production specifications and quality standards. Required Skills & Competencies Technical Proficiency: Machine Control, Tool Management, Metal Cutting, Metal Processing. Temperature Control: Ability to ensure correct metal temperature and prevent damage during processing. Forging Expertise: Expertise in forging techniques and blacksmithing hand tools. Aptitude: Strong visualization, originality, and fluency of ideas. Precision: Arm-hand steadiness and precision in metalwork. Process Knowledge: Knowledge of production processes, quality control, and material handling. Required Knowledge Fine Arts: Understanding of composition, design, and visual aesthetics. Design: Ability to read and interpret **blueprints, technical drawings, and models**. Computers & Electronics: Basic knowledge of electronic tools and equipment for process monitoring. English Language: Effective communication and understanding of technical instructions. Production & Processing: Knowledge of raw materials, manufacturing processes, and cost-effective production techniques. Required Experience & Education Experience: Prior work experience as a **Blacksmith or in sheet metal forming**. Education: Master of Engineering (MEng), Bachelor of Engineering (BE), Master of Science (MS), Associate of Science (AS), or Associate of Arts & Sciences (AAS). Personal Attributes Attention to detail and precision in execution. Creative problem-solving abilities. Ability to work safely under high-temperature conditions. Strong teamwork and communication skills. Qualification : Master of Engineering (MEng), Bachelor of Engineering (BE), Master of Science (MS), Associate of Science (AS), or Associate of Arts & Sciences (AAS)

Position: Sheet Metal Technician 80T Punch Press Location: Coimbatore Department: Sheet Metal Value Concept 80T Punch Press Employee Type: Staff Experience: 3 7 years Purpose of the Role Complete **shift-wise production targets** efficiently. Maintain **machine performance, utilization, and uptime**. Achieve **100% quality** for all manufactured parts. Implement and follow **Total Quality Management (TQM)** initiatives. Key Responsibilities Production & Operations Ensure all materials and resources are ready for manufacturing. Operate machines efficiently to meet production targets. Observe, identify, and report **abnormalities** through supervisors. Ensure **first-part self-inspection** and approval before QA submission. Record process details accurately in machine log registers. Ensure finished products match router quantity and quality requirements. Stack each finished part correctly in zip-lock covers or bins. Achieve **machine utilization of over 90%** consistently. Equipment & Maintenance Maintain machines in **proper working condition**, including lubrication. Arrange and set up material handling equipment and machinery. Ensure measuring instruments are in **good condition and calibrated**. Allocate work to employees during machine breakdowns or idle time. Quality & Continuous Improvement Study drawings, customer specifications, and tools to understand requirements. Develop and **improve manufacturing processes** based on product requirements. Ensure strict adherence to **TQM initiatives and quality standards**. Support process improvement activities to enhance efficiency and reduce scrap. Safety & Compliance Maintain a **safe and clean workplace** at all times. Follow all **safety rules, regulations, and company policies**.

Job Title: Mechanical Design Engineer Department: ETG Location: Coimbatore Experience Required: 5 10 Years Education: B.E / B.Tech in Mechanical Engineering or related fields M.E / M.Tech in Mechanical Engineering or related fields Job Summary: We are looking for a skilled and experienced Mechanical Design Engineer to lead the design and development of fuel, oil, and water pumps for automotive applications. The ideal candidate should have strong CAD skills, hands-on experience with prototyping and validation, and a deep understanding of component manufacturing and system integration. Key Responsibilities: Lead the design and development of mechanical pump systems for automotive applications (fuel, oil, water). Create detailed 3D and 2D CAD designs using Creo; manage design data using PLM systems. Support prototype builds and testing at bench and vehicle levels. Conduct FEA and CFD simulations to optimize performance, durability, and design integrity. Collaborate with cross-functional teams to ensure timely and efficient project execution. Coordinate with suppliers for component feasibility, tooling, and manufacturing processes (die casting, plastic injection, etc.). Prepare BOMs, perform cost estimations, and explore opportunities for cost reduction. Manage product validation, resolve issues, and implement corrective actions effectively. Interact with customers to gather requirements, conduct design reviews, and provide technical support. Ensure all designs comply with industry standards and drive continuous improvement in design quality and cost efficiency. Technical Expertise Required: Strong understanding of Fuel Pump, Oil Pump, and Water Pump design principles. Proficiency in 3D CAD tools Creo preferred. Experience with aluminium die casting, pressure casting, plastic injection moulding, and gravity casting (GI). Skilled in GD&T, tolerance stack-up analysis, and Design for Manufacturability & Assembly (DFMA). Familiarity with APQP, PPAP, DFMEA, DVP&R, and PLM/SAP systems. Qualification : M.E / M.Tech in Mechanical Engineering or related fields

Job Title: Mechanical Design Lead Department: ETG Location: Coimbatore Experience Required: 5 15 Years Education: B.E / B.Tech in Mechanical or Mechatronics M.E / M.Tech in Mechanical or Mechatronics Job Summary: We are seeking a highly skilled and detail-oriented Mechanical Design Lead to drive the design and development of automotive components and systems. The ideal candidate will have extensive experience in Creo, a strong background in mechanical design principles, and a solid understanding of manufacturing processes for plastics, sheet metal, and die casting. Key Responsibilities: Develop and refine 3D models of automotive components such as engines, transmissions, chassis, body panels, and enclosures using Creo. Assemble individual components into larger vehicle modules or systems within the CAD environment. Create and evaluate conceptual designs based on customer requirements and engineering standards. Optimize designs for manufacturability, performance, and cost using Creo s advanced design tools such as Behavioral Modeling. Perform FEA and CFD simulations using Creo to validate mechanical performance under stress, thermal, and dynamic conditions. Design complex sheet metal parts and freeform surfaces for bodywork, enclosures, and aerodynamic structures. Create detailed 2D manufacturing drawings with accurate dimensions, GD&T, and annotations. Apply robust design methodologies including DFMEA, DFA, and DFM to ensure product quality and manufacturability. Collaborate with cross-functional teams during product development and lead design reviews. Support the design and development of plastic components, especially for instrument clusters, infotainment systems, and display housings. Technical Skills & Requirements: Expert-level proficiency in Creo and strong working knowledge of AutoCAD. Deep understanding of plastic component design, sheet metal, and die casting processes. Proven experience in product design and development, including: Design calculations Design of Experiments (DoE) GD&T and stack-up analysis Design validation and optimization Knowledge of LCD/TFT instrument clusters, infotainment systems, and related mechanical packaging. Strong command of design for manufacturing and assembly principles. Excellent communication and collaboration skills to work with internal teams and external stakeholders. Qualification : M.E / M.Tech in Mechanical or Mechatronics

Position: Technician QA In Process Inspection Location: Coimbatore Department: QA In Process Inspection Employee Type: Staff Purpose of the Role Responsible for **in-process, dimensional, and final inspection** of products. Ensure timely stage-wise, final inspection, and **First Article Inspection (FAI)**. Prepare and maintain quality documentation and reports. Conduct product and process audits. Ensure adherence to **Quality Management System (QMS)** and customer quality requirements. Handle **non-conformances** and ensure corrective and preventive actions are implemented. Key Responsibilities & Accountabilities Inspection & Quality Control Perform **in-process, dimensional, and final inspections** to achieve quality targets. Execute QC activities to reduce **COPQ (Cost of Poor Quality)** and scrap. Ensure highest quality output that meets customer expectations in a cost-effective manner. Carry out critical inspections and ensure job closure by technicians, accurately recorded in **route cards/Oracle system**. Quality Documentation & Reporting Prepare and maintain **quality plans** complying with drawings, process documents, and customer requirements. Prepare **FAI documents (Form 1, 2, and 3) as per AS9102** for allocated projects. Inspect full and partial FAI parts and verify associated documents and reports. Maintain records as per **TQM, AS9100, Nadcap**, and customer standards. Audits & Continuous Improvement Conduct **product and process audits** as per audit schedules. Raise alerts for non-conformance/deviations and ensure resolution. Verify implementation of **Corrective Actions and Preventive Actions (CAPA)**. Analyze quality data to identify trends and participate in **New Product Development (NPD)** to identify quality requirements. Team Coordination & Training Allocate work to technicians and monitor shift-wise progress. Provide **on-the-job training and guidance** to new joiners. Track operator performance, provide feedback, and support skill development. Dimensional & Material Inspection Conduct **dimensional inspections** of composite parts, metallic parts, and tooling as per inspection plans. Prepare, review, and maintain inspection reports for composites, metallic parts, and tooling. Required Skills & Competencies Knowledge of **dimensional inspection techniques** for composites, metallic parts, and tooling. Familiarity with quality standards such as **AS9100, Nadcap**, and customer-specific requirements. Strong **documentation and reporting skills**. Ability to identify process improvements and implement corrective actions. **Team coordination, mentoring, and training** capabilities. **Analytical thinking** and proficiency in using advanced quality control tools.