Drawing Review Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Job Title: Senior Software Engineer Firmware Development Location: Pune Experience: 5 to 7 Years Qualification: B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, Telecommunication, or Electrical Engineering Job Summary We are looking for an experienced and innovative Senior Software Engineer to lead the firmware development for embedded systems across our product lines. This role involves designing and developing embedded software architectures, conducting design validations, and collaborating closely with cross-functional teams to ensure robust, scalable, and high-performance solutions that meet product requirements and quality standards. Key Responsibilities 1. New Product Development Analyze customer requirements and conduct technical feasibility studies. Design product architecture (SW, HW, FW) and finalize key components and tools. Create detailed block diagrams, signal flows, class diagrams, and DFMEAs. Develop firmware for embedded systems including GUI, drivers, communication protocols, etc. Perform code reviews, debugging, and unit testing. Validate designs through simulation and field testing. Prepare all technical documentation for engineering release. Collaborate with testing teams to address test feedback and implement corrective actions. 2. Standards & Documentation Define and maintain software design guidelines, SOPs, and coding standards. Ensure adherence to product standards, including both Indian and International codes. Maintain comprehensive documentation including schematics, flowcharts, and technical manuals. 3. Project Monitoring & Reporting Participate in project review meetings and provide regular updates. Maintain timesheets and project tracking tools in accordance with project timelines and SPI targets. 4. Customer Support & RCA Address and resolve firmware-related customer complaints. Conduct root cause analysis (RCA) and implement corrective firmware releases. 5. Knowledge Sharing & Innovation Contribute to internal knowledge bases and reusable component libraries. Propose improvements to design methodologies, tools, or processes as part of continuous innovation. Actively contribute to the organization s technology roadmap with new ideas and solutions. Key Skills & Competencies Technical Skills: Strong experience in firmware development for embedded systems. Expertise in .NET platform, C/C++, and object-oriented programming. Experience with GUI development, communication protocols (UART, I2C, SPI, CAN, etc.). Familiarity with design simulation, debugging tools, and unit testing frameworks. Knowledge of design for manufacturability (DFM) and design for testability (DFT). Understanding of DFMEA, IPC standards, and product lifecycle management. Experience in compliance with Indian and International product standards. Behavioral & Leadership Skills: Strong analytical and problem-solving capabilities. Excellent written and verbal communication skills. Highly accountable, dependable, and self-motivated. Customer-focused with a drive for results. Collaborative mindset with the ability to work across multidisciplinary teams. Willingness to innovate and share knowledge for team and organizational growth. Performance Indicators Timely delivery of assigned modules (Schedule Performance Index) Adherence to design and coding standards Reduction in post-release bugs Quality and completeness of documentation Effectiveness in RCA and bug resolution Contributions to knowledge sharing and innovation Be part of a forward-thinking engineering team working on cutting-edge embedded and software technologies. Collaborate with industry experts in a high-performance environment. Access to continuous learning, upskilling programs, and certification support. If you re passionate about embedded systems and software architecture and ready to make an impact, we d love to hear from you. Apply now! Qualification : B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, Telecommunication, or Electrical Engineering

Job Title: Engineering Manager Software Location: Pune Experience: 12+ Years Education: B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering Job Summary We are seeking an experienced Engineering Manager Software to lead our embedded and application software development team. The ideal candidate will have deep technical expertise in software architecture, strong leadership capabilities, and a proven track record of delivering high-quality embedded solutions. You will drive new product development, process adherence, project execution, and team development while ensuring innovation, scalability, and customer satisfaction. Key Responsibilities 1. New Product Development Collaborate with Product Management to define software specifications and finalize GATE sign-offs. Lead the design and development of scalable and modular software architectures. Benchmark competitor products to identify differentiation opportunities. Implement latest technology trends and best practices. Ensure timely and high-quality software releases in coordination with engineering and operations teams. Drive automation in testing for operational efficiency. Review and approve design documentation, validation plans, and test reports. 2. Design Process & Standards Ensure adherence to NPD (New Product Development) process up to mass production. Enforce software coding standards, quality assurance, and documentation protocols. Set up and run structured design and code review mechanisms. Foster a culture of technical excellence, innovation, and continuous improvement. 3. Project Management Create detailed project plans and communicate timelines, milestones, and risks to all stakeholders. Track progress, manage scope, and ensure projects are delivered on time and within budget. Define and monitor project costs and resource allocations. Work with Product Management to develop product roadmaps and promotional content. Proactively identify risks and implement mitigation strategies. 4. People Management Define skill matrices and identify training needs for the software engineering team. Provide mentorship, coaching, and career development for team members. Conduct regular performance reviews with actionable feedback. Foster an open, collaborative, and engaging team culture that promotes knowledge sharing and innovation. 5. Customer Support & Technical Documentation Support application and service teams in resolving customer issues and technical queries. Provide inputs for product manuals, sample applications, and user documentation. Key Skills & Competencies Technical Skills Embedded systems software architecture Expertise in C/C++, .NET, or relevant programming platforms Familiarity with product life cycle management and design standards Strong understanding of test automation, validation, and release processes Exposure to modern DevOps tools and Agile methodologies Leadership & Managerial Skills Strategic planning and project execution Risk assessment and mitigation Strong communication and stakeholder management Talent development, mentoring, and team leadership Cross-functional collaboration and decision-making Performance Indicators On-time project delivery (Schedule Performance Index) Code quality and design defect rates Budget adherence and cost optimization Team engagement and retention metrics Customer issue resolution time Knowledge sharing and innovation contributions Lead a high-performing team at the forefront of embedded and intelligent system development. Work on impactful products with real-world applications across industries. Enjoy a collaborative culture with continuous learning, innovation, and career growth opportunities. Qualification : B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Mechanical Engineer (BIM) Location: Pune Experience: 1 5 Years Qualification: B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering Role Overview: We are seeking a highly motivated Mechanical Engineer (BIM) with hands-on experience in Revit MEP and BIM coordination to join our Pune-based team. The ideal candidate will work on a variety of domestic and international projects, handling mechanical services modeling, coordination, documentation, and BIM standards compliance across all stages of the project lifecycle. Key Responsibilities: Review project specifications and technical documents to support BIM execution. Assist in Revit model setup and input data validation. Perform mechanical services modeling using Autodesk Revit MEP and ensure coordination with architecture, structure, electrical, and other disciplines. Support creation of Revit content, parametric families, and detailed mechanical models including HVAC, plumbing, and fire protection systems. Manage project tasks, allocate daily responsibilities, and ensure timely delivery of project milestones. Participate in internal team discussions and client coordination meetings. Create, review, and QA/QC mechanical drawings, fabrication/shop drawings, and builder s work/spool drawings. Conduct clash detection and coordination using tools like Navisworks, BIM 360, BIMTrack, or Revizto. Perform BOQ and quantity take-offs, and contribute to drawing documentation and sheet setup. Adhere to client-specific BIM standards and ensure quality across all project deliverables. Provide technical support and feedback throughout different project phases. Required Skills & Experience: Mandatory: Proficiency in Autodesk Revit MEP and Autodesk Navisworks. Familiarity with AutoCAD is an added advantage. Working knowledge of pipe and duct sizing, pressure drop, and basic mechanical design calculations. Experience working in Common Data Environments such as BIM 360, Bluebeam, Dropbox, or ProjectWise. Hands-on experience with clash coordination tools like BIMTrack, Revizto, or BIM 360 Issues. Experience across diverse project types including residential, commercial, institutional, healthcare, transportation, and data centers. Prior experience with international projects is essential. Strong understanding of Revit modeling tools, including views, sheets, schedules, filters, and family creation. Ability to work on fabrication models, perform hanger/support modeling, and generate shop and spool drawings. Proficiency in mechanical services coordination and QA/QC review of 3D models and documentation. Knowledge of project phases and required deliverables at each stage. Soft Skills & Attributes: Strong oral and written communication skills. Ability to manage and prioritize multiple tasks in a fast-paced environment. Proactive, self-motivated, and adaptable to changing project requirements. Positive attitude with excellent teamwork and interpersonal skills. Professionalism in communication with team members, clients, and stakeholders at all levels. Qualification : B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering

Job Title: Senior Rebar Checker Designation: Sr. Engineer Location: Pune Experience: 5 10 Years Mode: On-site Qualification: Diploma / B.E. / B.Tech in Civil Engineering Role Overview: We are looking for an experienced Senior Rebar Checker to join our on-site team in Pune. The ideal candidate will have a strong background in civil/structural engineering with expertise in rebar detailing and checking, particularly in cast-in-place reinforced concrete structures for US/Canada projects. Key Responsibilities: Review and verify rebar shop drawings and Bar Bending Schedules (BBS) for accuracy and compliance with project specifications and codes. Check RC drawings for completeness, clarity, and constructability. Ensure all reinforcement detailing aligns with structural requirements and cast-in-place reinforcement standards. Coordinate with the detailing team and provide feedback to ensure corrections are implemented effectively. Assist in resolving technical queries related to rebar design and detailing. Work closely with engineers and project stakeholders to ensure project timelines and quality standards are met. Required Skills & Experience: Strong technical understanding of reinforced concrete structures. In-depth knowledge of cast-in-place reinforcement detailing practices. Hands-on experience working on US/Canada-based rebar projects. Proficiency in RebarCAD and working knowledge of AutoCAD. Proven experience in checking RC drawings and Bar Bending Schedules (BBS) for medium to large-scale projects. Qualification : Diploma / B.E. / B.Tech in Civil Engineering

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Position: Senior Data Scientist Location: Pune Employment Type: Full-Time Company: vConstruct (Construction Technology Company) About vConstruct vConstruct is a Pune-based construction technology company focused on revolutionizing the construction industry through advanced AI and ML solutions. Our Data Science and Analytics team comprises Data Scientists, AI Engineers, Data Analysts, and Data Engineers working collaboratively to drive innovation across all construction project phases from pre-construction to post-construction. Our mission is to harness the power of data and AI to improve predictability, automate processes, and enhance efficiency in construction domains such as scheduling, planning, supply chain, safety, quality control, site management, financials, and virtual design construction. Role Overview We are seeking a highly skilled Senior Data Scientist to lead the development of innovative AI and machine learning solutions focused on construction data. You will work on cutting-edge projects involving Computer Vision, Predictive Analytics, Generative AI, and Large Language Models (LLMs) using technologies such as MS Azure AI Services, OpenAI, and various ML frameworks. Key Responsibilities Collaborate strategically with cross-functional teams to identify and solve business problems through scalable AI/ML solutions. Analyze construction project data to develop predictive models using traditional methods and generative AI. Apply machine learning algorithms to enhance project execution, safety, risk assessment, and other core construction processes. Lead end-to-end development of scalable predictive and ML models, including hypothesis generation, development, deployment, and monitoring. Build, validate, and optimize machine learning and statistical models; review and quality control models developed by junior team members. Partner with engineering and business teams to deeply understand data, processes, and business requirements, and implement appropriate solutions. Stay updated on advances in data science and machine learning to continuously enhance vConstruct s capabilities. Use statistical techniques to detect anomalies and optimize workflows to ensure timely, cost-effective project delivery. Collaborate with product managers and business leaders to drive data-driven decision-making and communicate insights effectively. Visualize insights using BI tools to support stakeholders in understanding data outcomes. Key Projects Include Developing GPT-based language models customized for construction industry data (structured and unstructured). Utilizing computer vision for object detection on 2D drawings and 3D BIM models. Applying statistical frameworks to predict construction site losses, win/loss opportunities, and quantity forecasts. Integrating AI models deeply into construction operations to automate and improve efficiency. Qualifications Bachelor s or Master s degree in Computer Science, Data Science, Statistics, Mathematics, or a related field. 8-10 years of professional experience, including at least 6 years in data science, machine learning, and analytics. Proven track record of delivering impactful, production-ready AI/ML solutions. Experience managing multiple projects in fast-paced, dynamic environments. Strong business acumen with the ability to translate technical insights into actionable business strategies and communicate effectively with stakeholders. Experience with construction data or related industries (engineering, manufacturing) is a plus. Technical Skills Expertise in Python, R, or Scala programming. Proficiency with ML, AI, and statistical frameworks and libraries such as TensorFlow, PyTorch, scikit-learn. Strong experience in predictive analytics, clustering, classification, regression, and multivariate techniques. Hands-on experience with data visualization tools such as Tableau, Power BI, Matplotlib. Familiarity with cloud platforms (preferably Azure), Azure ML Services, and Snowflake is a plus. Strong SQL skills and experience working with relational databases. Knowledge of NLP and Computer Vision technologies is advantageous. If you re passionate about transforming the construction industry through AI/ML innovation and want to work with a talented, motivated team, apply now to join vConstruct s visionary journey. Qualification : Bachelors or Masters degree in Computer Science, Data Science, Statistics, Mathematics, or a related field

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Title: Software Tester Job Summary We are looking for a results-driven software tester to design and run tests on software usability. The tester will conduct tests, analyze results, and report findings to the design team. You may also interact with clients to understand product requirements. Key Responsibilities Review software requirements and prepare test scenarios. Detect and track software defects and inconsistencies. Execute tests on software usability. Provide timely solutions for any issues found. Analyze test results on database impacts, errors, and usability. Prepare detailed reports on testing activities and findings. Collaborate with other team members and departments. Interact with clients to understand product requirements. Participate in design reviews and provide feedback on requirements and potential issues. Required Skills & Qualifications Bachelor s degree in computer programming, software development, or related fields. 6 months to 2 years of experience as a Software Tester or similar role. Ability to handle multiple tasks simultaneously. Ability to work in a fast-paced environment with minimal supervision. Strong problem-solving and critical thinking skills. Team player with good time-management skills. Excellent interpersonal and communication skills. Qualification : Bachelors degree in computer programming, software development, or related fields.

Designation: Design Engineer Education: Diploma in Plastic Mould Technology / Tool & Die Making from CIPET, IGTR, GTTC, NTTF, or CITD. Experience: 1-2 years of experience in Mould Design or Tool Room. Job Location: Viman Nagar, Pune Preferred Joining: December 2024 Job Responsibilities: Understand mould design concepts and processes. Design hot runner accessories and systems. Review and interpret customer mould data. Interact with customers to finalize system designs. Create 3D and 2D system designs. Deliver project files within customer timelines. Manage design revisions based on customer feedback. Schedule systems for production. Collaborate with the production team during system manufacturing. Key Requirements: Basic understanding of injection moulding machines and processes. Knowledge of mould construction and basic mould design. Understanding of plastic engineering and manufacturing processes. Familiarity with geometrical dimensions, tolerances, steel materials, and heat treatment processes. Software Skills: Proficiency in SolidWorks (or similar CAD software). Experience in 3D modelling and 2D drafting. Technical Knowledge: Mould design and tooling expertise. Working knowledge of SolidWorks. Proficiency in English (reading, writing, and communication). General computer skills. Personal Attributes: Precision, flexibility, and a problem-solving mindset. Strong communication skills, with clear and professional written and verbal English. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve key industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance performance, functionality, and sustainability in their products and processes. With over 11,800 employees representing 93 nationalities, Oerlikon operates in more than 38 countries and across 207 locations worldwide. We value diversity, innovation, and excellence, making us a trusted partner globally.

Job Title: Sales Support Engineer Qualifications: Post Diploma / Diploma in Plastic Mold Technology or related field Experience: 3-4 years in hot runner design, mold maintenance, or related fields Job Location: Viman Nagar, Pune Note: Immediate joining required Job Summary The Sales Support Engineer plays a vital technical role by ensuring customer requests are fulfilled with accuracy and precision. This role involves close collaboration with the sales team and customers to understand project specifications, analyze CAD files, and design preliminary hot runner systems using 3D modeling software and AutoCAD. The Sales Support Engineer also supports the CAE team in optimizing designs and assists service engineers in diagnosing and resolving system issues. Effective communication, attention to detail, and problem-solving abilities are essential to succeed in this role. Key Responsibilities Design preliminary hot runner systems using 3D modeling software and AutoCAD. Analyze customer requests and CAD files to identify critical technical aspects. Collaborate with Sales and Application Engineering teams to clarify project specifications. Ensure all necessary specifications are gathered and documented accurately. Conduct CAE simulations to optimize hot runner designs and interpret mold flow analysis results (pressure, injection times, flow rates, etc.). Verify compliance with internal standards and evaluate any deviations or process criticalities with the Mold Flow team before finalizing quotes. Prepare and submit mold flow requests with complete technical data. Communicate all design information accurately to the design department via the planning team and Sales Assistant. Provide technical support to service engineers for diagnosing and resolving hot runner system issues. Review alignment between technical specifications and commercial offers made to customers. Ensure technical accuracy of system configurations and maintain clear communication with sales and customers. Collaborate across departments to ensure customer and company requirements are met. Manage site visits to customer premises when needed, including supporting system trials, troubleshooting, and performance monitoring. Stay updated on industry trends and technological advancements in hot runner systems. Required Knowledge & Skills Basic knowledge of injection mold design, technical drawings, and plastic processing. Proficiency in 3D modeling software (SolidWorks) and AutoCAD. Strong communication and problem-solving abilities. Willingness to travel when required. Ability to manage multiple projects under tight deadlines. Team player with a customer-focused approach. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance the performance, functionality, and sustainability of their products and processes. With over 11,800 employees across 93 nationalities, operating in 38 countries and 207 locations, Oerlikon values diversity, innovation, and excellence, making us a trusted partner worldwide.

Role Summary Product Design Engineer (Refrigerator Design) As a Product Design Engineer at Whirlpool, you will lead the design and development of parts for refrigerator products, focusing on plastics, sheet metal, and associated processes. You will leverage your expertise to drive the product lifecycle, from conceptualization to successful market delivery, ensuring that designs are manufacturable, reliable, and meet stringent safety standards. This role involves managing multiple projects, applying technical tools, and ensuring comprehensive project execution in a global engineering team environment. Educational Qualifications B.Tech in Mechanical Engineering or M.Tech in Design Engineering. Experience: B.E: 15-18 years M.Tech: 12-15 years Technical Expertise Design & Engineering: Proficiency in plastics and sheet metal design, specifically for refrigerator products. Solid understanding of engineering principles, including design for assembly, reliability, manufacturability, and safety. Expert in GD&T (Geometric Dimensioning & Tolerancing), design standards, and variation analysis. Strong skills in conceptualization, analytical thinking, and project planning/management. Ability to interpret simulation/test results to validate and improve designs. Project Management & Methodologies: Demonstrated ability to manage multiple projects simultaneously. Proficient in using APQP, OPEX/Six Sigma methodologies, and Lean tools for process improvement. Expertise in project planning, scope management, and risk management. Experience with tools like Concept Selection Matrix, DFMEA, Tolerance Stack-Ups, DVP, etc. Strong communication (written and verbal) and presentation skills. Managerial Expertise Global Team Experience: Exposure to working within a global engineering team, collaborating across diverse cultures and regions. Leadership Skills: Ability to coach, mentor, and direct engineers in subgroups, fostering an environment of growth and innovation. Flexibility & Adaptability: Skilled in adapting to fast-changing business needs and project priorities. Structured & Self-Organized: Ability to stay organized and structured in a dynamic, fast-paced work environment. Key Responsibilities Design and Documentation: Lead the design and release of product/subsystem/module/component designs and drawings as per project timelines and targets. Develop Design Validation & Verification Reports (Lab requests, Prototyping requests, Simulation requests). Document design guides, key suppliers, subsystem roadmaps, and ensure IP creation with an innovation-driven approach. Project Management: Drive projects using established product development processes across cross-functional teams. Manage project scope, schedule, and risk management to ensure execution aligns with agreed plans and cost targets. Lead and own cross-functional projects, coordinating with internal and external stakeholders. Develop and implement best practices for project management and work package management techniques. Technical Application & Tools: Apply Six Sigma tools (Certified Green/Black Belt), RCA, 8D, A3, DFMEA, and APQP methodologies. Utilize CAD tools (Creo 4.0/6.0), PLM Software (Windchill), and GD&T for tolerance stack-up analysis and design for variation. Conduct Value Analysis/Value Engineering (VAVE) and apply techniques to optimize designs and reduce costs. Additional Skills and Qualifications Certifications: PMP certification or equivalent project management training. Proven track record in leading product development projects, ensuring successful product integration across functions. In-depth experience working with global technology centers, vendors, manufacturing, and procurement teams to implement projects in production. At Whirlpool, you ll have the opportunity to work on innovative products that impact lives around the world. We value diversity and are committed to fostering an inclusive and supportive work environment where all employees are empowered to thrive.

About Apexon Apexon is a digital-first technology services firm that specializes in accelerating business transformation and delivering human-centric digital experiences. We work with clients across the digital lifecycle, helping them outperform their competition through speed and innovation. With deep expertise in AI, analytics, app development, cloud, commerce, CX, data, DevOps, IoT, mobile, quality engineering, and UX, Apexon is at the forefront of helping businesses capitalize on the limitless opportunities digital offers. Backed by Goldman Sachs Asset Management and Everstone Capital, Apexon has a global presence with 15 offices and 10 delivery centers across four continents. We re committed to enabling #HumanFirstDigital. Role: Software Engineer As a Software Engineer at Apexon, you will play a pivotal role in developing innovative technology solutions, particularly focused on improving cancer diagnostics. Your work will directly contribute to saving and improving lives globally. You will be working with a fast-paced, collaborative team of top-tier engineers. Key Responsibilities: Software Development: Propose and evaluate design options, review code, and analyze requirements. Implement high-quality code and tests in areas such as web APIs, databases, cloud components, and analysis pipeline execution. Process & Operations: Ensure test automation and regulatory compliance are embedded into software development practices. Apply Lean principles in activities to drive continuous improvement in team operations and product quality. Who You Are: You are an experienced software engineer with a passion for working in innovative technology that makes a difference in the healthcare industry. You thrive in a collaborative environment and have a strong leadership skillset that drives successful project execution. You are committed to continuous improvement and have experience delivering high-quality software solutions. Qualifications: Bachelor s degree in Computer Science or a related technical discipline. 4+ years of hands-on experience designing, developing, and deploying scalable web applications and services. Experience in building software products using Java, REST APIs, Microservices, and modern web frameworks like Angular/React. Proficient in data structures (e.g., Stack, Queue, LinkedList) and algorithms. Experience with cloud infrastructure, preferably AWS. Ability to collaborate on architectural discussions and take ownership of projects to deliver high-quality software. Experience with relational and NoSQL databases. Dedication to Agile/Lean practices and scalable architecture. Ability to develop reusable inner- or open-sourced components for multiple projects. Experience with behavior or test-driven development. Experience working closely with security and compliance teams to ensure software meets requirements. Ability to work with globally distributed, multicultural teams. Nice to Have: Experience developing regulated products under design control. Familiarity with virtualization, containers, and orchestration platforms (Docker, Kubernetes). Experience with tools like Datadog, Helm, and GitHub Actions. A passion for continuous improvement in software development processes and frameworks. Our Commitment to Diversity & Inclusion: Apexon is a proud equal opportunity employer, certified by Great Place to Work in the USA, India, and the UK. We are dedicated to fostering a diverse and inclusive work environment and strictly prohibit discrimination and harassment. We offer equal opportunities to employees and applicants without regard to gender, race, ethnicity, national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or other protected characteristics. Our Perks and Benefits: We provide a comprehensive benefits program designed to recognize your contributions and support your personal growth, learning, and well-being. Our offerings include: Group Health Insurance covering family of 4. Term Insurance and Accident Insurance. Paid Holidays & Earned Leaves. Paid Parental Leave. Learning & Career Development opportunities. Employee Wellness programs.

Job Summary: We are looking for an Engineering Systems Support Manager to oversee the installation, support, and improvement of engineering software and systems. The ideal candidate will have a strong background in providing technical support, managing system changes, and ensuring the effective operation of engineering tools. This role combines managerial responsibilities with hands-on technical expertise in supporting and improving engineering software. Managerial Responsibilities (30%): 1. Software Installation & Licensing: Assist with the installation and troubleshooting of engineering software and resolve any licensing or access control issues. 2. Helpdesk Support: Resolve helpdesk tickets and provide customer support for installations, training, and ongoing application support for assigned products. 3. System Changes & Implementations: Support major system changes, including new hardware and software implementations, ensuring smooth transitions and minimal disruption. 4. Engineering Systems Development: Coordinate engineering systems development by managing planning, scheduling, ordering, and tracking related tasks. 5. Improvement Projects: Participate in improvement projects and conduct team audits, taking corrective actions when necessary to ensure process and product quality. General Professional Practice (GPP) Responsibilities (70%): 1. Technical Support: Maintain a mid-level understanding of Windows or UNIX operating systems and interfaces to provide effective support for engineering tools. 2. Cross-functional Reviews: Participate in cross-functional reviews, collecting data and metrics using tools like Six Sigma to identify areas for improvement. 3. Process Improvement Tools: Track processes, monitor system performance, and utilize tracking systems and other improvement tools to identify areas of improvement. 4. Corrective Actions: Implement corrective actions based on problem reports and change requests, ensuring that software products meet high-quality standards. 5. Customer & Supplier Interface: Serve as the point of contact between customers, suppliers, engineers, and other functions to ensure smooth operations and communication. 6. Documentation & Reporting: Document tasks and report progress on systems and tools such as CGT Windchill, CREO, and AutoCAD. Create assemblies and drawings in CREO, ensuring adherence to GD&T standards and product knowledge. Competencies & Skills: Engineering Software Application: Ability to support and certify engineering software to enable efficiency for engineering users. Customer Focus: Build and maintain strong customer relationships, delivering customer-centric solutions. Collaboration: Effectively work with cross-functional teams to achieve shared objectives. Problem-Solving: Take corrective actions based on problem reports and change requests to improve system quality. Communication Skills: Develop and deliver communications that are clear and tailored to different audiences. Interpersonal Savvy: Relate comfortably with diverse groups and build strong relationships both within and outside the organization. Trust & Integrity: Gain the confidence and trust of others through honesty and authenticity. Values Differences: Recognize and appreciate diverse perspectives within the organization. Qualifications: Education: High school diploma or equivalent required. A two-year associate s degree or relevant certification from an accredited institution in a STEM field is preferred. Experience: Intermediate-level work experience in engineering systems support or related roles, gained through education, training, or hands-on experience. Experience in managing engineering software, providing helpdesk support, and implementing systems changes is a plus. Licensing Requirements: May require licensing for compliance with export controls or sanctions regulations. Benefits: Competitive salary and benefits package. Opportunity for professional growth and career advancement. Supportive, collaborative work environment. Flexible working hours and work-life balance initiatives. This role provides a unique opportunity to combine technical expertise with managerial responsibilities in a dynamic engineering environment. Apply today to be part of a team focused on innovation and continuous improvement!