Electrical Calibration Jobs in Bengaluru

Job Title: Calibration Technician Location: Bangalore Experience Required: 1 2 Years Education Qualification: Diploma in Electronics & Communication (ECE) or Electrical Engineering Job Summary: We are seeking a detail-oriented and organized Calibration Technician to support the calibration of electronic equipment in accordance with industry standards. The ideal candidate will manage internal and external calibration processes, ensure equipment reliability, and maintain accurate documentation, while adhering to AS9100 and ISO9001 standards. Key Responsibilities: Monitor, witness, and review calibration activities conducted by external calibration houses; verify and approve calibration certificates against defined tolerance limits. Manage the internal calibration process, including scheduling, witnessing, documentation, and obtaining approvals from authorized personnel. Maintain an up-to-date calibration database, ensuring that all equipment is calibrated at specified intervals. Act as the single point of contact for communication between the calibration house and internal design or engineering teams. Ensure all calibrated equipment is protected from unauthorized adjustments, damage, or deterioration that could affect measurement accuracy. Monitor and log environmental conditions of equipment to support calibration integrity. Evaluate equipment reliability and escalate issues when abnormalities or failures are observed. Ensure adherence to AS9100 and ISO9001 standards for all calibration processes. Exhibit an understanding of engineering and technical work disciplines and maintain professional interactions. Required Skills & Competencies: Understanding of equipment calibration principles and tolerance analysis. Experience in working with electronic testing and measuring instruments. Proficient in maintaining calibration records and scheduling tools. Strong attention to detail and analytical mindset. Familiarity with AS9100 and ISO9001 calibration compliance requirements. Good communication and coordination skills for liaising with calibration vendors and internal teams. Qualification : Diploma in Electronics & Communication (ECE) or Electrical Engineering

Electrical System Installation (ESI) Engineer Experience: 3 12 Years Location: Bangalore Role Overview: We are looking for an experienced Electrical System Installation Engineer / Technical Leader to support electrical harness design and installation projects, primarily in aerospace programs such as Airbus A320. This role requires managing design synchronization, modification processes, and ensuring compliance with Airbus design standards and processes. The candidate will work closely with cross-functional teams and design offices to deliver consistent, high-quality electrical system installations. Key Responsibilities: Coordinate and synchronize design activities with various design offices and project teams (e.g., DDMS projects) Manage the complete modification process from Change Request initiation to drawing delivery Establish and maintain design-related processes, methods, and tools to ensure full consistency and coherence Provide accurate and timely reporting to the Head of Project Support system installation design, follow-up, and validation checks Create and maintain drawing sets for Harness Design, Installation, VKE, Equipment Installation, Heater Installation, VU/VE Design Ensure compliance with Airbus installation rules and processes throughout the project lifecycle Qualifications: 3 to 12 years of hands-on experience in Electrical System Installation with strong DMU skills for harness modeling and installation analysis within A320/SA projects Good understanding of Airbus-specific tools and processes including Configuration Management, EHI Concept Design, Electrical Bracket Positioning, IP and UID proposals Experience in system installation design and support activities (design follow-up, installation checks) Knowledge of Functional Electrics (FE) including Configuration Management, Design, RDR & DQN instructions, and support on delivery checks is a plus Familiarity with Design Organization Approval (DOA) is advantageous Technical Skills: Expertise in Catia V5, VPM, PDMLink, PASS SSI / CCD, TAKSY, AIRINA, IPM4Legacy, and other Airbus customized tools Proficient in MS Office applications (Word, PowerPoint, Excel)

Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 1 Year Openings: 1 About the Role: As a DCS Engineer, you will report to the Assistant Manager Engineering Services. Your primary purpose will be to manage the complete product lifecycle for DCS applications, encompassing software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role that requires both strong analytical skills and a readiness to travel. What You'll Do: DCS Software Development: Develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Configuration: Gain hands-on experience and apply your knowledge in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Commissioning & Testing: Lead and execute the programming, commissioning, and testing of 800xA systems on-site. Customer Support: Provide excellent customer handling and support for Factory Acceptance Testing (FAT), ensuring client satisfaction. Project Lifecycle Management: Take responsibility for the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel extensively to customer sites across India for commissioning activities. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: 0 to 1 year of experience in a relevant engineering role. Technical Skills: Strong knowledge and hands-on experience with ABB 800xA Software Development. Proficiency in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Demonstrated experience in the complete project lifecycle from software development to commissioning in ABB 800xA. Excellent analytical skills to troubleshoot and optimize systems. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Good communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India.

Junior Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 2 Years Openings: 1 About the Role: As a Junior DCS Engineer, you'll report to the Assistant Manager Engineering Services. Your primary purpose will be to support the complete product lifecycle for DCS applications, focusing on software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role ideal for someone looking to build their expertise in industrial automation, requiring both analytical skills and a readiness to travel. What You'll Do: HMI Graphic Development: Develop and design Human-Machine Interface (HMI) graphics for DCS systems, ensuring intuitive and effective user interfaces. DCS Software Development: Assist with and learn to develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Programming & Commissioning: Participate in the programming, commissioning, and testing of 800xA systems on-site, gaining practical experience in live environments. Project Lifecycle Support: Support the team across the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel to customer sites across India for commissioning activities as needed. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: Candidates with 0-2 years of experience in industrial automation, control systems, or relevant project work will be considered. Technical Skills: Good analytical skills to understand and troubleshoot system functionalities. An understanding of the complete project lifecycle from software development to commissioning, especially in ABB 800xA, is highly beneficial. Willingness to learn and grow in a technical environment. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Strong communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India. If you're a recent graduate or early-career engineer with a passion for DCS systems and eager to launch your career in industrial automation, we encourage you to apply! Qualification : A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication

Position: Production Engineer Department: Production Location: Bengaluru Role Overview: We are seeking a skilled Production Engineer to manage and optimize the operation of press machines within our production facility. The ideal candidate will ensure smooth, efficient production processes by maintaining equipment, troubleshooting issues, and driving continuous improvement in machine performance and product quality. Key Responsibilities: Oversee the day-to-day operation of press machines, ensuring they run efficiently and meet production targets. Perform routine preventive maintenance to keep press equipment in peak operating condition. Troubleshoot and resolve mechanical, electrical, or operational problems promptly to minimize production downtime. Calibrate and adjust machinery to maintain adherence to quality standards and product specifications. Analyze production data to identify opportunities for enhancing press performance, reducing cycle times, and improving product quality. Respond quickly to mechanical and electrical faults, implementing effective corrective measures. Qualifications & Skills: Bachelor s degree (B.E/B.Tech) in Mechanical Engineering or a relevant diploma. Practical experience in machine operation, maintenance, and troubleshooting in a manufacturing environment. Strong problem-solving skills with the ability to diagnose and fix mechanical and electrical issues efficiently. Knowledge of quality standards and machine calibration techniques. Qualification : Bachelors degree (B.E/B.Tech) in Mechanical Engineering or a relevant diploma.

Position: Electrical Engineer Location: Bengaluru, Karnataka, India Reporting To: Project Manager Industry: Semiconductor / Automation Qualifications: Education: Bachelor of Engineering (BE) in Electrical Engineering (Mandatory) Experience: 2 to 5 years in related fields (Control Panels, Power Calculations, Circuit Breakers) Software: Proficient in AutoCAD Electrical 2018 or later Candidate Profile: Preferably from Semiconductor Industry or Automation Sector. Hands-on experience in electrical design and control panel schematics. Essential Skills and Experience: Minimum 1 year experience creating detailed point-to-point schematics for Control Panels, Motor Control Centres, Power Distribution Panels. Minimum 2 years of electrical design experience including: Power calculations Component selection Schematic and Bill of Materials (BOM) creation I/O list creation Wire, cable, and harness selection/design Sensor selection (voltage, current, arc, temperature, etc.) Working knowledge of circuit components such as circuit breakers, contactors, relays, protection relays, push buttons, indicators, connectors, terminal blocks, cable routing accessories, and sensors. Desirable Skills: Familiarity with various process sensors: pressure, vacuum, flow, distance, displacement, proximity, limit, rotary and linear position sensors. Knowledge of EMI/EMC principles and panel design. Working knowledge of motor control systems. Responsibilities: Conduct professional electrical engineering research, design, development, modification, and testing related to electrical systems and power distribution/generation. Collaborate with a multidisciplinary engineering team (electrical, mechanical, software, technical support, productivity engineers, suppliers) on design and modifications. Maintain and develop process checkpoints to ensure compliance with design standards and project schedules. Drive process improvements in collaboration with leadership peers. Create electrical schematics and systems based on requirements; generate and release engineering drawings and BOMs. Assist in developing and refining functional specifications for electrical systems and power distribution. Qualification : Bachelor of Engineering (BE) in Electrical Engineering (Mandatory)

Job Title: Automation & Instrumentation Engineer Location: Bengaluru Role and Responsibilities Electrical Integration: Integrate CyRo s electrical systems (power supplies, sensors, actuators) with customer equipment and facilities, ensuring seamless compatibility and reliability. Design and implement custom electrical interfaces such as harnesses, connectors, and junction boxes to connect CyRo systems with customer-specific infrastructure (e.g., conveyors, AMRs, SCADA). Configure and validate CyRo s Industrial PC (IPC) and control systems to enable smooth communication with customer devices and networks. Sensor and Actuator Configuration: Configure, calibrate, and optimize CyRo s sensors (vision systems, force-torque sensors) and actuators (grippers, motion controllers, robotic arms) to fulfill application-specific needs. Troubleshoot sensor and actuator performance during integration to ensure alignment with customer workflows. Safety and Compliance: Design and implement safety-rated electrical systems including emergency stop circuits, light curtains, and safety interlocks, adhering to industry standards such as ISO 13849 and IEC 61508. Conduct risk assessments and incorporate protective components like fuses, circuit breakers, and relays to guarantee system safety and reliability. Deployment and Commissioning Support: Support deployment and commissioning of CyRo systems in customer environments, ensuring proper electrical integration and functionality. Diagnose and resolve electrical issues onsite, collaborating with customer teams and internal stakeholders. Assist in validation tests to confirm system performance and compliance in real-world scenarios. Documentation and Training: Prepare detailed documentation including electrical schematics, wiring diagrams, and integration guides for customers. Develop and conduct training sessions for customer teams on operation, maintenance, and troubleshooting of CyRo electrical systems. Maintain accurate records of integration designs, test results, and customer feedback to drive continuous improvement. Skills and Experience Strong proficiency in electrical system design covering wiring, connectors, and power distribution. Experience integrating robotic and automation machinery within industrial customer environments. Hands-on expertise with industrial sensors (vision, force-torque) and actuators (grippers, motion controllers, robots). Solid understanding and implementation experience of industrial communication protocols such as EtherCAT, Modbus, TCP/IP. Familiarity with safety-rated electrical systems and relevant industry standards (ISO, IEC, OSHA). Experience configuring and integrating IPCs, PLCs, and similar control hardware. Proven troubleshooting and optimization skills in live industrial settings. Excellent communication and teamwork abilities for cross-functional collaboration and client interactions. Required Qualifications Bachelor s or Master s degree in Electrical Engineering, Mechatronics, or related disciplines. Minimum 3 years experience in electrical systems design, automation, and system integration. Strong knowledge of industrial communication protocols, safety compliance, and electrical design fundamentals. Demonstrated success in deploying and integrating automation systems in industrial environments. Additional Preferred Qualifications Experience with cobots and industrial robotic arms. Familiarity with LabVIEW and C++ programming. Knowledge of integration with enterprise systems such as WMS, OMS, ERP. Experience with IIoT devices and SCADA systems. Qualification : Bachelors or Masters degree in Electrical Engineering, Mechatronics, or related disciplines.

Job Title: Mechanical System Engineer - Robotics Location: Bengaluru Role and Responsibilities System Design & Integration: Analyze customer production lines to break down requirements and design mechanical systems integrating the CyRo platform. Ensure mechanical designs meet customer-specific constraints such as space, payload, and environmental conditions. Develop systems including CyRo, feeding mechanisms, sensors, fixtures, and other mechanical components for tailored automation solutions. Perform tolerance analysis to validate dimensional and functional requirements. Collaborate closely with electrical, software, and systems engineering teams to ensure seamless subsystem integration. Design mounting systems, fixtures, and interface components to facilitate integration into customer facilities when required. Mechanical Optimization: Optimize system designs by integrating mechanisms and sensors to enhance performance, modularity, and scalability. Select and design mechanisms for part presentation, feeding, reorientation, and manipulation considering space and performance constraints. Develop automation cells with modularity and scalability for current and future applications. Continuously refine workflows to improve cycle times, reduce errors, and increase operational efficiency. Modelling: Create and integrate detailed mechanical designs, including CAD layouts and fixtures, supporting customer automation solutions. Validate designs through tolerance analysis and develop calibration fixtures for robotic systems. Work cross-functionally to ensure mechanical designs integrate effectively with instrumentation, software, and controls. Documentation: Produce comprehensive documentation such as design specifications, validation reports, and scalability guidelines to ensure reproducibility. Develop detailed installation guides, maintenance manuals, and troubleshooting documentation for customer use. Skills and Experience Proficient in CAD software such as SolidWorks, CATIA, or AutoCAD. Strong grasp of mechanical engineering principles, materials science, and manufacturing processes. Experience in robotics, automation, or mechatronics is highly preferred. Familiarity with relevant industry standards and safety regulations (ISO, ANSI, OSHA). Excellent analytical, problem-solving, communication, and teamwork skills. Understanding of manufacturing processes, assembly lines, and automation cell design. Prior experience designing and integrating automation systems in production or process lines. Required Qualifications Bachelor s or Master s degree in Mechanical Engineering, Mechatronics, or related fields. Minimum 3 years of experience in mechanical design and automation systems integration. Strong knowledge of manufacturing processes and mechanical systems integration. Skilled in CAD and simulation tools. Additional Preferred Qualifications Experience with robotic automation systems and integration into manufacturing workflows. Familiarity with designing feeding mechanisms, part presentation systems, and end-of-arm tooling (EOAT) for robotics. Exposure to Autonomous Mobile Robots (AMRs) and other robotic mobility solutions. Understanding of sensors and actuators commonly used in automation (vision systems, force-torque sensors, linear actuators). Experience with plant simulation tools such as Siemens Plant Simulation or FlexSim. Qualification : Bachelors or Masters degree in Mechanical Engineering, Mechatronics, or related fields.

Electrical Principal Engineer FPGA Team Location: Bengaluru, India Team: Electrical Engineering Company: Dell Technologies Role Overview As a Principal Electrical Engineer, you will contribute to the architecture, design, and validation of FPGA-based hardware systems for Dell s next-generation enterprise servers. This role involves working across global teams to deliver robust, scalable, and efficient PCBA (Printed Circuit Board Assembly) and logic solutions that align with industry standards and internal requirements. Key Responsibilities Architect and design next-gen hardware features in collaboration with front-end teams and partners. Analyze and recommend trade-offs in design features and costs. Guide global teams with best practices in electronic hardware design. Own and deliver system interfaces and support cross-functional development efforts. Create comprehensive documentation for testing and validation. Essential Requirements 8 12 years of experience in FPGA hardware verification using Verilog, SystemVerilog, VHDL. Expertise in UVM, ABV (Assertion-Based Verification), code coverage, and unit-level simulation. Knowledge in digital design methodologies: CDC (Clock Domain Crossing) RDC (Reset Domain Crossing) Static timing analysis Experience with x86 or ARM architectures. Familiarity with peripheral protocols: I2C, I3C, SMBus, IPMI, IPMB. Strong background in both analog and digital design. Understanding of hardware/software co-design and debugging complex systems. Desirable Qualifications Experience with Intel/AMD x86 and ARM-based systems. Hands-on with FPGA tools: Xilinx, Lattice, Altera Quartus, ModelSim/QuestaSim. Passion for mentoring and knowledge sharing. Dell Technologies offers a collaborative and innovative environment where hardware engineers work at the forefront of industry advancements. You'll be empowered to lead cutting-edge hardware projects, influence product design, and make a lasting impact on the future of enterprise technology.

Key Responsibilities: QMS Documentation & Activities: Expertise in preparing and managing QMS (Quality Management System) documentation related to facility and engineering activities, including writing SOPs for lab instruments, equipment, and utilities, as well as preparing qualification documents (DQ, IQ, OQ, PQ), deviation handling, change control, risk assessment, CAPA, and commissioning documents. Cross-functional Collaboration: Work closely with both internal teams and external stakeholders to ensure the smooth implementation and execution of engineering maintenance activities. This includes document preparation, process review, implementation, and follow-ups with various functional teams and vendors. Facility Modification & Commissioning: Manage facility modification projects, including overseeing commissioning and qualifications documentation to ensure that changes are aligned with regulatory and operational standards. Lab Equipment Operations & Maintenance: Oversee the operation and maintenance of lab equipment, including CO2 incubators, deep freezers, autoclaves, biosafety cabinets, LAF, stability chambers, cooling incubators, lab centrifuges, water baths, hot air ovens, incubator shakers, water purification systems, bioreactors, cold rooms, and liquid nitrogen systems. Analytical Instrument Operations & Maintenance: Manage the operation and maintenance of analytical instruments such as flow cytometers, spectrophotometers, multimode microplate readers, chemical image systems, gel image systems, osmometers, pH & conductivity meters, weighing balances, and western blot instruments. Utility Equipment Maintenance: Manage the operation and maintenance of HVAC systems (including air handling units, chillers, cooling towers, and BMS monitoring systems), utility equipment such as transformers, DG sets, air compressors, nitrogen generators, and LT panels. Preventive Maintenance Planning: Prepare and review schedules for periodic maintenance of lab instruments, utility equipment, and facility infrastructure. Ensure that all maintenance activities are conducted timely and in accordance with operational needs. Corrective and Preventive Actions: Coordinate and oversee corrective and preventive actions related to observations during internal and external audits, ensuring continuous compliance with quality standards. Vendor and OEM Coordination: Serve as the primary point of contact for external vendors and OEM service providers for periodic preventive maintenance (PM), calibration activities, and addressing breakdown issues. Project & Facility Modification Support: Coordinate and support the execution, verification, and successful completion of new projects or facility modification activities. Safety and Sustainability: Ensure compliance with safety practices and procedures, sustainability programs, and hygiene maintenance standards across the facility. Key Skills: QMS Documentation: In-depth experience in writing and managing SOPs and qualification documents (DQ, IQ, OQ, PQ) for lab instruments and utility systems. Proficient in handling deviations, change controls, risk assessments, CAPA, and commissioning documentation. Lab Equipment Expertise: Strong knowledge in the operation and maintenance of various lab equipment, including incubators, freezers, autoclaves, biosafety cabinets, stability chambers, centrifuges, and water purification systems. Analytical Instruments Management: Expertise in handling and maintaining analytical instruments like flow cytometers, spectrophotometers, microplate readers, and various other lab-based instruments used for experiments and analysis. Utility Systems & HVAC Management: Strong knowledge of utility equipment management, including HVAC systems, transformers, DG sets, air compressors, and nitrogen generators. Preventive & Corrective Maintenance: Ability to plan, schedule, and execute preventive and corrective maintenance tasks for lab instruments and utility systems, ensuring minimal downtime. Vendor Management: Expertise in coordinating with external vendors and OEMs for service contracts, maintenance, calibration, and addressing equipment failures or breakdowns. Project Coordination: Ability to manage and execute facility modification projects, ensuring timely delivery and alignment with operational needs. Safety & Compliance: Sound knowledge of safety practices, hygiene, sustainability programs, and regulatory compliance within facility and equipment operations. Competencies: Attention to Detail: High level of attention to detail in handling documentation, operational processes, and safety practices. Problem Solving: Strong analytical skills to troubleshoot and resolve issues in equipment, systems, and processes. Interpersonal & Communication Skills: Excellent communication and interpersonal skills to effectively collaborate with internal teams, external vendors, and service providers. Project Management: Ability to manage projects efficiently, ensuring all modifications, installations, and maintenance activities are completed on time and within scope. Team Collaboration: Team-oriented mindset with a collaborative approach to work alongside internal departments and external contractors/service providers. Adaptability: Ability to adapt to changing priorities, work in dynamic environments, and manage multiple tasks simultaneously. Qualification : Diploma/BE in electrical and electronics, with QMS related certifications with 10+Years of experience.

General Summary: Qualcomm is at the forefront of technology innovation, enabling next-generation experiences and driving digital transformation to create a smarter, connected future. As a Qualcomm Systems Engineer, you will research, design, develop, simulate, and validate systems-level solutions, collaborating across functional teams to meet and exceed system-level requirements. The Automotive System Performance team optimizes multimedia performance on Snapdragon Automotive chipsets, covering technologies like Camera, Video, Graphics, and Display. Responsibilities: System Optimization: Support profiling and optimization of system use cases related to multimedia performance on automotive platforms. Hardware Understanding: Set up and manage hardware configurations in lab environments and conduct performance testing. Multimedia Performance Validation: Work on IP hardware functional and performance validation for multimedia domains such as Camera, Video, Display, GPU, and Audio. Debugging and Issue Resolution: Passionately debug system-level issues, utilizing Android system tools, JTAG, scripting, and other debugging tools. Cross-Team Collaboration: Work with global, cross-functional teams to meet project milestones and ensure successful execution of performance-related tasks. Pre-Silicon and Emulation Work: Leverage expertise to work in pre-silicon/emulation environments as needed. Required Skills and Experience: Experience: 6 8 years in embedded systems with expertise in multimedia hardware architecture and device driver development. Hardware Fundamentals: Strong knowledge of display, video, and camera basics; DDR, SMMU, NOC; system interconnects; and bus protocols like AXI/AHB. SoC Architectures: Deep understanding of Auto/Mobile SoC architectures and multimedia subsystems' data flows. Processor Expertise: Basics of ARM architecture, including multicore/multiprocessor systems with SMP/heterogeneous cores. Programming Skills: Proficiency in C programming for embedded platforms. Operating Systems: Familiarity with Linux kernel internals, scheduling policies, locking mechanisms, MMU/paging, and RTOS concepts. Validation Experience: Prior experience in silicon or emulation-based validation of hardware performance in multimedia domains. Debugging Tools: Experience with Android system tools, debugging tools, and scripting. Cross-Functional Skills: Ability to collaborate across geographies and teams, demonstrating excellent communication and problem-solving skills. Preferred Skills: Exposure to working in emulation/pre-silicon environments. Experience with system QoS, performance monitoring, and profiling tools. Familiarity with Android/Linux kernel fundamentals and multimedia technology stack. Educational Requirements: Required: Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, or related fields. Preferred: Master's degree in Computer Engineering, Computer Science, Electrical Engineering, or related fields. Why Join Qualcomm? Cutting-Edge Innovation: Be part of a team driving next-generation automotive multimedia technologies. Global Collaboration: Work alongside talented professionals from diverse geographies and functional areas. Professional Growth: Opportunities to develop and advance within a company leading the technology sector. Impactful Work: Contribute to the development of automotive platforms that redefine connectivity and multimedia performance. Qualification : Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, or related fields.

Position: Control Design Lead Department: Automation Department Reporting To: Senior Manager - Automation Location: Bengaluru Key Responsibilities Project Involvement: Actively participate in the Preliminary Stage Meeting (PSM) to evaluate existing sites, equipment, components, processes, and collaborate with customer representatives alongside the Project Leader (PL). System Requirements: Work closely with the PL to understand mechanical and application system requirements and ensure they align with project objectives. Control System Design: Design complete electrical and control systems, including: Wiring diagrams Panel diagrams Flowcharts of operational sequences (CNC & PLC) Operating logic, I/O assignments, sequence of operation, error & exception conditions, and safety interlocks. Program Development: Develop CNC/Robot programs, HMI, and PLC ladder logic based on project needs. Design Documentation: Prepare DAP (Design Approval Package) drawings in accordance with the provided checklist. Ensure the creation of detailed Bill of Materials (BOM) and Critical Bought Out Material (CBOM) lists, adhering to target costs. Release panel and machine wiring diagrams for manufacturing. Generate and track micro-schedules and sub-milestones in design activities to meet timelines. Design Review & Compliance: Review designs individually or with a competent team for correctness, completeness, and suitability, ensuring compliance with application-specific checklists. Proactive Project Support: Provide support during the build, testing, and trials. Address design modifications and handle User Requirement Change Requests (UCR), System Change Requests (SCR), and Engineering Change Requests (ECR). Documentation and Manuals: Develop panel layouts, field wiring diagrams, and basic user manuals (including startup/shutdown sequences, diagnostics, and programmed cycles). Collaboration: Work closely with assembly and design engineers to guide and support throughout the design and manufacturing phases. Skills and Expertise PLC Programming: Expertise in PLC code development with experience in multi-PLC systems (e.g., AB, Siemens, Mitsubishi, etc.). Motion Control Systems: Experience with motion control and CNC Gantry GCode software development. User Interface Development: Ability to design and develop user interfaces for operational ease. System Design: Proficiency in flowchart creation and application development. Professional Expertise: Experience in control systems including CNC, PLC, robotics, drives, servo systems, HMI, IoT, etc. Qualifications Essential: Bachelor s degree or Diploma in Electrical, Mechatronics, Instrumentation, or related fields. Experience: 6-10 years total professional experience. 3-6 years of relevant experience in control system design, automation, or related fields. Qualification : Bachelors degree or Diploma in Electrical, Mechatronics, Instrumentation, or related fields

Engineer MEP (Mechanical, Electrical, Plumbing) Education: BE (Electrical/Mechanical) Experience: 2 6 years Location: Bangalore Job Overview We are looking for a dedicated MEP Engineer to join our team and ensure the successful execution of mechanical, electrical, and plumbing works on our projects. You will be responsible for overseeing the installation, testing, and commissioning of MEP systems, ensuring they meet the project s technical specifications, safety standards, and schedule. You will collaborate with contractors, consultants, and internal teams to ensure the highest quality of work and efficient progress throughout the project lifecycle. Key Responsibilities MEP Installation & Supervision: Oversee the installation, inspection, and testing of MEP equipment, fittings, and systems, ensuring compliance with project specifications and consultant requirements. Quality & Schedule Control: Ensure that MEP work is carried out according to approved drawings and within the designated timeframes, aligning with the overall construction program. Coordination & Execution: Coordinate with contractors and agencies to ensure that MEP work is executed efficiently, maintaining high standards of quality, speed, economy, and safety. Drawing Analysis & Feedback: Study and review project drawings and provide feedback or suggestions for improvement, if necessary. Material Management: Prepare bills for materials and services raised by contractors on-site, and raise requisitions for any additional materials needed. Site Supervision: Conduct daily site walk-throughs and closely monitor the progress of subcontractor work, ensuring it adheres to standards. Installation Methods & Sequence: Stay informed of best practices for installation methods and ensure the correct sequence of MEP work is followed on-site. Reporting & Documentation: Prepare technical reports, drawings, and specifications related to MEP work and ensure all documentation is accurate and up-to-date. Material Inspection: Inspect incoming MEP materials for quality and compliance with IS codes, BOQs, and project specifications. Required Skills Strong knowledge of Electrical & Fire Systems, HVAC (Heating, Ventilation, and Air Conditioning), and Plumbing systems. Familiarity with IS codes and BOQs for MEP materials and construction standards. Proficiency in reviewing and interpreting technical drawings, specifications, and project documentation. Excellent site supervision and coordination skills with the ability to manage multiple tasks simultaneously. Ability to handle material requisitions and ensure timely procurement of necessary supplies. Good communication skills to work effectively with contractors, consultants, and internal teams. Qualifications BE in Electrical Engineering or Mechanical Engineering. 2 6 years of experience in MEP systems, preferably in construction or infrastructure projects. Qualification : BE in Electrical Engineering or Mechanical Engineering

MEP Engineer Location: Bengaluru Qualification: B.Tech (Mechanical / Electrical) Experience: 6+ years Job Description We are looking for a skilled and detail-oriented MEP Engineer to oversee the Mechanical, Electrical, and Plumbing systems for our construction and infrastructure projects. The ideal candidate should have hands-on experience in MEP design coordination, execution, and site supervision, ensuring quality, safety, and compliance with project specifications. Key Responsibilities Plan, review, and manage the execution of MEP works (HVAC, electrical, plumbing, fire-fighting, etc.) at project sites. Coordinate with architects, structural engineers, consultants, and contractors to ensure seamless integration of MEP services. Review technical drawings, specifications, and BOQs for accuracy and alignment with project requirements. Monitor MEP installation activities to ensure compliance with design, quality, and safety standards. Conduct regular site inspections and testing of MEP systems. Identify and resolve any on-site technical issues related to MEP services. Assist in procurement of MEP materials and ensure timely delivery. Support project managers in preparing progress reports and documentation. Required Skills & Experience B.Tech in Mechanical or Electrical Engineering. Minimum 6 years of experience in MEP coordination and execution in construction or infrastructure projects. Good understanding of HVAC, electrical systems, water supply, drainage, and fire safety systems. Proficient in reading technical drawings and using AutoCAD or related software. Strong problem-solving, coordination, and communication skills. Knowledge of applicable building codes and safety regulations. Qualification : B.Tech in Mechanical or Electrical Engineering

Position: Quality Supervisor Quality Assurance Department: Quality Assurance Location: Bengaluru Role Overview: We are seeking a detail-oriented Quality Supervisor to conduct in-process and final inspections, ensuring products meet all required standards and specifications. The role involves inspecting raw materials, components, and finished goods, maintaining accurate records, and enforcing quality standards. Key Responsibilities: Perform in-process and final inspections based on drawings, standards, and specifications. Inspect raw materials, components, sub-assemblies, and finished products using precision measuring instruments. Maintain thorough records of inspections, test results, and non-conformance reports. Identify and segregate defective materials or products to prevent quality issues. Ensure compliance with ISO standards, customer-specific requirements, and internal quality guidelines. Qualifications: Diploma or B.Tech in relevant engineering or quality discipline. Strong attention to detail and understanding of quality assurance processes. Proficient in using measuring instruments and inspection tools. Ability to maintain accurate documentation and communicate quality issues effectively. Qualification : Diploma or B.Tech in relevant engineering or quality discipline.

Position: Draftsman Design & Build Location: Bangalore Experience: 3 5 Years (Preferably in Commercial Interior Fit-Outs Design & Build / General Contracting) Role Overview: We are looking for a detail-oriented and skilled Draftsman with experience in commercial interior design and build projects. The ideal candidate will be responsible for preparing accurate layout plans, detailed construction drawings, and coordinating interior drawings with structural and service teams. Proficiency in AutoCAD and a strong understanding of interior design principles are essential. Key Responsibilities: Conduct onsite measurements and prepare accurate "as-built" layout plans. Create detailed furniture layout presentation drawings using AutoCAD. Prepare comprehensive drawings including plans, sections, elevations, and built drawings with design details. Coordinate and integrate architectural and engineering inputs into final drawings. Align interior drawings with structural and MEP (Mechanical, Electrical, Plumbing) service drawings. Develop demolition and construction layouts, including all types of partitions. Prepare reflected ceiling plans (RCP) with detailed light sections. Generate detailed drawings for loose furniture as reflected in 3D views. Break larger projects into actionable tasks with realistic timeframes. Maintain clear communication with architects, engineers, and design teams throughout the project lifecycle. Qualifications & Skills Required: Diploma in Architecture or Interior Design, or B.Sc. in Engineering. Degree from a technical college will also be considered. 3 5 years of relevant experience in commercial interior design & build projects. Proficiency in AutoCAD is a must. Strong coordination and visualization skills. Good interpersonal and communication abilities. Manual drawing skills are a plus, though not mandatory. Ability to handle feedback constructively and maintain a positive attitude. Capable of working both independently and collaboratively within a team. Qualification : Diploma in Architecture or Interior Design, or B.Sc. in Engineering.

Position: Application Engineer, Analog & Power Job Overview: We are seeking an Application Engineer specializing in Analog & Power to join our team. In this role, you will provide advanced engineering design services and support to the regional engineering team, with a focus on power electronics and analog engineering solutions. You will be responsible for hardware engineering support, including PCB design and review, electronic simulations, and laboratory analysis, all while ensuring compliance with industry standards and customer specifications. Key Responsibilities: Provide advanced engineering design and support for power electronics and analog systems, assisting the regional engineering team. Conduct hardware engineering tasks, including PCB reviews, electronic simulations, and using lab equipment such as PCBA rework tools and oscilloscopes for product development. Lead PCB design from initial concept (block diagrams) to part selection, schematics, layout, Gerber files, and prototype testing. Develop clear and concise technical documentation, such as whitepapers, technical reports, and internal training materials. Support the development and validation of reference designs to meet customer specifications. Ensure that all designs comply with relevant industry standards and customer specifications. Attend technical and sales training to stay up to date with current technologies and trends. Maintain accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field. At least 7 years of experience in electronics/semiconductors, power management, and analog product design. Strong technical expertise in power conversion topologies (DC-DC, AC-DC, DC-AC). Experience working with WBG (Wide Bandgap) devices such as SiC and GaN. Solid experience with electrical instrumentation, including Op-Amps, signal conditioning, sensors, and data acquisition systems. Familiarity with industry standards and compliance (e.g., IEC, UL, ISO) for high-power systems. In-depth understanding of EMI/EMC standards and mitigation techniques for high-power designs. Experience in reference design development, validation, and component optimization. Strong communication and interpersonal skills to collaborate effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Access to training and professional development opportunities. Performance coaching and growth support. The chance to work with a fun and supportive team. Opportunity to be part of a growing and strong company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field.

Position: Application Engineer, IP&E Job Overview: We are looking for an Application Engineer specializing in IP&E (Interconnect, Passive, and Electro-Mechanical systems) to provide advanced engineering design services and support to our regional engineering team. In this role, you will align with suppliers and technology strategies to maximize business growth while supporting product development across a range of industries. Your expertise will help guide the team in identifying and promoting components such as connectors, terminal blocks, headers, and high-power connectors. Key Responsibilities: Provide advanced engineering design support for interconnects, passive devices, and electro-mechanical systems, collaborating with suppliers to maximize business growth. Identify and recommend component applications tailored to specific technologies and industries. Offer hardware support by identifying, cross-referencing, and promoting components like connectors, terminal blocks, headers, sockets, EV connectors, and high-power/high-speed connectors for product development. Ensure all designs comply with relevant industry standards and customer specifications. Leverage strong technical knowledge of interconnects, passives, and electro-mechanical systems to support the regional engineering team. Stay up to date with current technology trends through technical and sales training. Develop product performance specifications and product development roadmaps. Ensure the accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Mechanical, Electrical Engineering, or a related field. At least 7 years of experience in IP&E component applications and product development. Proven experience working in R&D environments and product design processes. Knowledge of interconnect technologies such as board-to-board, wire-to-board, connectors, cables, terminal blocks, headers, sockets, backplane systems, flex circuits, and high-speed or high-density systems. Experience with innovative cable products and cable assembly products. Excellent problem-solving skills with a keen attention to detail. Strong communication and collaboration skills to work effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Training and professional development opportunities. Performance coaching and growth support. Opportunity to work with a fun and supportive team. Be part of a strong and growing company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Mechanical, Electrical Engineering, or a related field.

Job Description: MEP Manager Experience: 4+ Years Qualification: B.TECH (Mandatory), M.TECH (Preferred) Job Description: We are seeking an experienced MEP Manager with at least 4 years of experience to manage and oversee Mechanical, Electrical, and Plumbing (MEP) works in various construction projects. The ideal candidate will have strong knowledge of MEP drawings and works, excellent project management and coordination skills, and experience in planning, scheduling, and managing material procurement. The role requires someone who has completed at least three projects, including residential and commercial buildings, and is capable of managing all phases of MEP works. Key Responsibilities: Project Management: Lead MEP operations for construction projects, ensuring timely delivery of work across all stages. Oversee and manage the MEP team to ensure adherence to project timelines, budgets, and quality standards. Handle the complete process from planning, coordination, and execution of MEP activities to final handover. MEP Drawings and Works: Ensure strong knowledge of all MEP-related drawings and coordinate their execution. Prepare and review MEP shop drawings and obtain necessary approvals from clients and authorities. Monitor and manage all MEP works, including electrical, mechanical, and plumbing systems, ensuring they align with the design specifications. Tender Analysis and Worker Orders: Analyze the tender Bill of Quantities (BoQ) and worker orders, ensuring accurate estimation and cost management for MEP systems. Planning & Scheduling: Create and manage project schedules in MSP (Microsoft Project), ensuring the timely execution of tasks at each stage of the project. Monitor the progress of MEP works, identifying potential delays, and implementing corrective actions when necessary. Material Management: Prepare material requisitions and manage procurement processes. Ensure proper material tracking, handling, and inventory management, reducing wastage and delays. Documentation & Reporting: Prepare and maintain project documentation, including MIR (Material Inspection Reports), RPI (Request for Inspection), ECR (Engineering Change Requests), DPR (Daily Progress Reports), DLR (Daily Log Reports), and other critical documents. Review and track method statements, micro work schedules, cash flow statements, and other documents as required. Approval and Certification: Prepare and submit client bills for certification, ensuring timely processing and approval. Liaise with clients and vendors to ensure smooth project execution and approval of materials and works. Coordination: Coordinate with other departments and project teams, ensuring the timely completion of all tasks and proper integration of MEP systems with other construction activities. Handle communication with client teams, subordinates, vendors, and project management office (PMO) teams. Leadership and Communication: Provide leadership and guidance to subordinates, ensuring high team performance and adherence to project goals. Act as the primary point of contact for all MEP-related issues, ensuring effective communication and collaboration across the project team. Qualifications and Skills: Experience: Minimum 4 years of experience as an MEP Manager, with a proven track record of completing and handing over at least 3 projects (1 residential + 1 commercial). Technical Skills: Expertise in all MEP drawings and works, with hands-on experience in planning, scheduling, and executing MEP systems. Proficiency in MS Office, CAD, and MSP (Microsoft Project) for planning and scheduling. Strong analytical skills for reviewing tenders, BoQs, worker orders, and material management. Documentation and Compliance: Experience in preparing and reviewing various project documents such as MIR, RPI, ECR, DPR, DLR, JMS, Pre-commissioning & Post-commissioning reports, and handling method statements. Communication Skills: Excellent communication skills to interact with various stakeholders, including clients, subordinates, vendors, and project management teams. Qualification: A B.TECH degree is mandatory. M.TECH is preferred. Other Skills: Ability to mentor and manage teams effectively. Strong organizational and multitasking abilities. Ability to work under pressure and meet project deadlines. What We Offer: Competitive salary and benefits. Opportunity to work on high-profile construction projects. A collaborative work environment focused on innovation and continuous improvement. Qualification : A B.TECH degree is mandatory. M.TECH is preferred.

Key Responsibilities: Operation & Maintenance of HVAC Systems: Oversee and maintain HVAC systems, including AHU (Air Handling Units), BMS (Building Management System), chillers, and other associated components. Project Management: Plan, schedule, coordinate, and monitor assigned engineering modification projects. Assess project requirements, calculate timelines, and sequence project elements for optimal efficiency. Infrastructure Planning & Design: Lead the planning and design of new infrastructure requirements, specifically lab spaces, ensuring compliance with operational needs. Prepare BOQs (Bills of Quantities) and issue tenders to potential vendors, in coordination with the Supply Chain Management (SCM) team. Coordination with Contractors: Manage relationships with external contractors and service providers for executing new construction works, lab renovations, and facility enhancements. Compliance & Safety: Ensure adherence to safety, health, and environmental policies. Work alongside various stakeholders to maintain compliance with GMP standards and guidelines related to infrastructure and equipment. Development of SOPs: Develop, implement, and maintain Standard Operating Procedures (SOPs) to ensure compliance with GMP (Good Manufacturing Practices) principles for facility and equipment operations. Training & Development: Train the contract maintenance team on site operations, ensuring that all maintenance activities comply with safety and operational standards. Facility Maintenance & Upkeep: Oversee the maintenance of electrical and safety fixtures like UPS & batteries, panels, lighting fixtures, fire detection systems, fire hydrants, public address systems, and lifts, with minimal disruption to daily operations. Preventive & Breakdown Maintenance: Plan and implement preventive, periodical, and breakdown servicing of machinery and equipment, ensuring minimal downtime and efficient operation of facilities. Key Skills: HVAC System Management: Expertise in managing the operation and maintenance of HVAC systems, including high and low-side components such as AHUs, chillers, and BMS. Project Management: Ability to manage engineering projects from planning to execution, ensuring alignment with schedules and budgets. Proficient in preparing project schedules and monitoring progress. Infrastructure Design & Planning: Strong knowledge of infrastructure planning, especially in lab design, and expertise in preparing BOQs and issuing tenders. Contractor Coordination: Skilled at liaising with contractors and service providers for construction, renovation, and facility upgrades. Safety & Compliance Knowledge: Understanding of safety, health, and environmental policies, and expertise in adhering to GMP standards for infrastructure and equipment. Maintenance Planning: Expertise in developing and executing maintenance schedules for electrical and safety systems, ensuring operational continuity and minimal disruptions. SOP Development: Proficient in developing and implementing SOPs related to equipment and facility management in compliance with industry standards. Training & Team Management: Ability to train and manage maintenance teams, ensuring high standards of operation and maintenance. Competencies: Presentation & Communication Skills: Strong verbal and written communication abilities, capable of presenting complex information clearly and effectively to different stakeholders. GMP Standards & Procedures: Knowledge of Good Manufacturing Practices (GMP) and familiarity with industry standards and regulatory requirements for facility management and equipment maintenance. Interpersonal Skills: Ability to interact effectively with various stakeholders, including contractors, vendors, and internal teams. Team Player: Collaborative mindset, working well within cross-functional teams and with external partners to achieve common goals. Project Schedule Preparation & Management: Competence in preparing, updating, and managing project schedules, ensuring deadlines and milestones are met. Qualification : Diploma/ITI 4- 6 years experience.