Electrical Engineer Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Hardware Design Engineer Location: Pune Experience: 4+ Years Qualification: B.E. / B.Tech in Electronics, Electrical, Telecommunication, or Instrumentation Engineering Job Summary We are seeking a skilled and experienced Hardware Design Engineer to join our R&D team in Pune. The ideal candidate will have a strong background in designing electronic control modules, embedded hardware, power electronics, and sensor interfacing. This role requires a hands-on engineer capable of taking designs from concept through to prototyping, testing, and production readiness. Key Responsibilities Analyze and interpret product and system requirements to define hardware architecture. Design analog and digital circuits, including microcontroller-based systems. Develop schematics using tools like OrCAD Capture or Altium Designer. Design and simulate power supplies (Buck, Boost, Linear) using tools like LTspice, PSpice, etc. Ensure EMI/EMC compliance in PCB design and overall system architecture. Develop multilayer PCBs with proper signal integrity, grounding, and thermal design practices. Interface with various digital communication protocols: UART, I2C, SPI, RS485, CAN, Ethernet. Conduct board-level debugging using tools like DSO, logic analyzers, and multimeters. Perform signal integrity analysis using Hyperlynx or Cadence SI tools. Coordinate prototyping, testing, and design validation activities. Create and maintain design documentation including schematics, BOMs, test reports, and revision control. Apply DFM/DFT principles for production-ready designs and support certification activities. Key Competencies & Skills Technical Expertise Embedded hardware design (MCU/MPU based control boards) Analog front-end and sensor interface circuits Power supply design (SMPS Buck, Boost, Linear regulators) EMI/EMC compliant PCB design (Multilayer) High-speed PCB layout understanding and design review Design simulations and circuit behavior modeling Hands-on debugging and validation Tools & Technologies Design Tools: Altium Designer, OrCAD Capture Simulation: PSpice, LTspice Debugging: DSO, Logic Analyzer, Multimeters Signal Integrity: Hyperlynx, Cadence SI Protocols: UART, I2C, SPI, CAN, RS485, Ethernet Additional Expectations Strong analytical thinking and problem-solving skills Ability to work independently and collaboratively across cross-functional teams Excellent documentation and communication skills Passion for innovation, continuous learning, and product excellence Be part of an innovative and growing hardware design team Work on advanced electrification and control systems Contribute to real-world, high-impact projects from concept to launch Qualification : B.E. / B.Tech in Electronics, Electrical, Telecommunication, or Instrumentation Engineering

Job Title: Senior Software Engineer Firmware Development Location: Pune Experience: 5 to 7 Years Qualification: B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, Telecommunication, or Electrical Engineering Job Summary We are looking for an experienced and innovative Senior Software Engineer to lead the firmware development for embedded systems across our product lines. This role involves designing and developing embedded software architectures, conducting design validations, and collaborating closely with cross-functional teams to ensure robust, scalable, and high-performance solutions that meet product requirements and quality standards. Key Responsibilities 1. New Product Development Analyze customer requirements and conduct technical feasibility studies. Design product architecture (SW, HW, FW) and finalize key components and tools. Create detailed block diagrams, signal flows, class diagrams, and DFMEAs. Develop firmware for embedded systems including GUI, drivers, communication protocols, etc. Perform code reviews, debugging, and unit testing. Validate designs through simulation and field testing. Prepare all technical documentation for engineering release. Collaborate with testing teams to address test feedback and implement corrective actions. 2. Standards & Documentation Define and maintain software design guidelines, SOPs, and coding standards. Ensure adherence to product standards, including both Indian and International codes. Maintain comprehensive documentation including schematics, flowcharts, and technical manuals. 3. Project Monitoring & Reporting Participate in project review meetings and provide regular updates. Maintain timesheets and project tracking tools in accordance with project timelines and SPI targets. 4. Customer Support & RCA Address and resolve firmware-related customer complaints. Conduct root cause analysis (RCA) and implement corrective firmware releases. 5. Knowledge Sharing & Innovation Contribute to internal knowledge bases and reusable component libraries. Propose improvements to design methodologies, tools, or processes as part of continuous innovation. Actively contribute to the organization s technology roadmap with new ideas and solutions. Key Skills & Competencies Technical Skills: Strong experience in firmware development for embedded systems. Expertise in .NET platform, C/C++, and object-oriented programming. Experience with GUI development, communication protocols (UART, I2C, SPI, CAN, etc.). Familiarity with design simulation, debugging tools, and unit testing frameworks. Knowledge of design for manufacturability (DFM) and design for testability (DFT). Understanding of DFMEA, IPC standards, and product lifecycle management. Experience in compliance with Indian and International product standards. Behavioral & Leadership Skills: Strong analytical and problem-solving capabilities. Excellent written and verbal communication skills. Highly accountable, dependable, and self-motivated. Customer-focused with a drive for results. Collaborative mindset with the ability to work across multidisciplinary teams. Willingness to innovate and share knowledge for team and organizational growth. Performance Indicators Timely delivery of assigned modules (Schedule Performance Index) Adherence to design and coding standards Reduction in post-release bugs Quality and completeness of documentation Effectiveness in RCA and bug resolution Contributions to knowledge sharing and innovation Be part of a forward-thinking engineering team working on cutting-edge embedded and software technologies. Collaborate with industry experts in a high-performance environment. Access to continuous learning, upskilling programs, and certification support. If you re passionate about embedded systems and software architecture and ready to make an impact, we d love to hear from you. Apply now! Qualification : B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, Telecommunication, or Electrical Engineering

Job Title: Engineering Manager Software Location: Pune Experience: 12+ Years Education: B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering Job Summary We are seeking an experienced Engineering Manager Software to lead our embedded and application software development team. The ideal candidate will have deep technical expertise in software architecture, strong leadership capabilities, and a proven track record of delivering high-quality embedded solutions. You will drive new product development, process adherence, project execution, and team development while ensuring innovation, scalability, and customer satisfaction. Key Responsibilities 1. New Product Development Collaborate with Product Management to define software specifications and finalize GATE sign-offs. Lead the design and development of scalable and modular software architectures. Benchmark competitor products to identify differentiation opportunities. Implement latest technology trends and best practices. Ensure timely and high-quality software releases in coordination with engineering and operations teams. Drive automation in testing for operational efficiency. Review and approve design documentation, validation plans, and test reports. 2. Design Process & Standards Ensure adherence to NPD (New Product Development) process up to mass production. Enforce software coding standards, quality assurance, and documentation protocols. Set up and run structured design and code review mechanisms. Foster a culture of technical excellence, innovation, and continuous improvement. 3. Project Management Create detailed project plans and communicate timelines, milestones, and risks to all stakeholders. Track progress, manage scope, and ensure projects are delivered on time and within budget. Define and monitor project costs and resource allocations. Work with Product Management to develop product roadmaps and promotional content. Proactively identify risks and implement mitigation strategies. 4. People Management Define skill matrices and identify training needs for the software engineering team. Provide mentorship, coaching, and career development for team members. Conduct regular performance reviews with actionable feedback. Foster an open, collaborative, and engaging team culture that promotes knowledge sharing and innovation. 5. Customer Support & Technical Documentation Support application and service teams in resolving customer issues and technical queries. Provide inputs for product manuals, sample applications, and user documentation. Key Skills & Competencies Technical Skills Embedded systems software architecture Expertise in C/C++, .NET, or relevant programming platforms Familiarity with product life cycle management and design standards Strong understanding of test automation, validation, and release processes Exposure to modern DevOps tools and Agile methodologies Leadership & Managerial Skills Strategic planning and project execution Risk assessment and mitigation Strong communication and stakeholder management Talent development, mentoring, and team leadership Cross-functional collaboration and decision-making Performance Indicators On-time project delivery (Schedule Performance Index) Code quality and design defect rates Budget adherence and cost optimization Team engagement and retention metrics Customer issue resolution time Knowledge sharing and innovation contributions Lead a high-performing team at the forefront of embedded and intelligent system development. Work on impactful products with real-world applications across industries. Enjoy a collaborative culture with continuous learning, innovation, and career growth opportunities. Qualification : B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Job Title: Lead Engineer BIM Electrical Location: Pune Qualification: B.E. (Electrical or related field) Experience: 8 12 Years Role Overview: We are seeking an experienced Lead Engineer BIM Electrical to take full ownership of BIM-related electrical deliverables across diverse MEP projects. The ideal candidate will bring deep expertise in Revit MEP, strong coordination capabilities, and a proven track record of working on international, multidisciplinary projects. This is a leadership role focused on technical excellence, BIM implementation, and cross-functional collaboration. Key Responsibilities: Lead and manage the BIM Electrical function, ensuring high-quality modeling, coordination, and documentation across all projects. Oversee the implementation and management of BIM software tools relevant to Electrical systems. Assist project teams with BIM project setup, model configuration, and adherence to organizational standards. Support active project work including Revit MEP 3D modeling, detailing, and clash coordination. Liaise and coordinate directly with clients, consultants, and other engineering disciplines for seamless project delivery. Troubleshoot and resolve BIM design or modeling issues to maintain workflow efficiency. Develop, document, and update BIM implementation strategies, standards, and best practices. Conduct technical onboarding and training for new team members on BIM tools and workflows. Required Skills & Experience: Proven expertise in Revit MEP Electrical 3D modeling and detailing. Strong experience in BIM coordination, particularly across MEP disciplines. Exposure to international projects and understanding of global BIM standards and workflows. Experience in multidisciplinary coordination, especially in large-scale projects such as commercial, residential, mixed-use, and institutional buildings. Good understanding of 3D electrical systems, components, and layouts typically used in building projects. Strong visualization and spatial coordination skills, with the ability to work on complex architectural and MEP projects. Effective communication skills, with the ability to lead and mentor junior engineers and collaborate with cross-functional teams. Qualification : B.E. (Electrical or related field)

Job Title: Head Resource Management Location: Pune Experience: 15 to 20 Years Job Description We are seeking an experienced and strategic Head of Resource Management to lead resource planning and allocation across our wind and solar energy projects. This leadership role is critical to ensuring efficient workforce deployment, supporting project timelines, and aligning with business goals in the renewable energy sector. Key Responsibilities 1. Resource Planning & Allocation Develop and oversee a centralized resource management system for renewable energy (wind and solar) projects. Align resource planning with project schedules, client requirements, and budget constraints. Optimize resource allocation by collaborating with cross-functional teams across engineering, operations, and site execution. 2. Team Leadership & Development Lead a team of resource planners, site coordinators, and logistics professionals. Partner with HR to drive recruitment, onboarding, training, and workforce development programs in line with Suzlon s sustainability and people-first values. Foster a culture of continuous improvement and accountability within the team. 3. Project Coordination Collaborate with Project Heads, Site Managers, and Engineering teams to accurately forecast resource needs across all project phases. Ensure the timely mobilization and demobilization of manpower and equipment at multiple project sites. Resolve on-ground resource bottlenecks to maintain smooth project execution. 4. Reporting & Analytics Monitor and report on resource utilization, efficiency, and deployment costs. Leverage data-driven insights and analytics to enhance resource planning, minimize delays, and drive operational excellence. Qualifications Bachelor s Degree in Civil, Mechanical, or Electrical Engineering 15 20 years of experience in resource or operations management, preferably within infrastructure, EPC, or renewable energy sectors Proven leadership in managing cross-functional teams across geographically dispersed sites Strong project coordination, analytical, and stakeholder management skills Working knowledge of project scheduling tools, ERP systems, and analytics dashboards is a plus Qualification : Bachelors Degree in Civil, Mechanical, or Electrical Engineering

Job Title: CM - Officer EHS (Environment, Health & Safety) Location: Pune Department: Construction Management EHS Cell Employment Type: Full-Time Experience: 5 to 8 Years Role Objective To ensure the effective implementation of Environment, Health & Safety (EHS) policies and procedures across construction, operations, and maintenance activities, promoting a safe and compliant work environment at project sites. Key Responsibilities Ensure EHS compliance across all construction, operation, and maintenance activities on assigned projects. Conduct daily safety inspections to enforce safe work practices and identify unsafe conditions. Monitor and ensure proper storage and disposal of hazardous waste in line with statutory norms. Oversee the maintenance and availability of firefighting systems and personal protective equipment (PPE). Maintain and update Material Safety Data Sheets (MSDS) for raw materials and chemicals on site. Deliver site-specific training programs for employees and contractors on: EHS regulations and compliance Safe handling of hazardous substances Proper usage of PPE Fire prevention and response Develop and maintain emergency contingency plans for the site. Issue safety alerts and communicate unsafe acts or conditions to project management promptly. Prepare and submit regular safety reports and documentation to relevant stakeholders. Design and conduct site-specific training modules and safety presentations for workers and supervisory staff. Carry out periodic audits of construction zones, labor camps, and material storage areas. Oversee health monitoring initiatives within labor camps and ensure hygienic living conditions. Ensure strict adherence to PPE protocols, display of safety signages, and compliance across all project levels and locations. Qualifications & Experience Education Mandatory: BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering Preferred Additional Certifications: Advanced Diploma in Industrial Safety Diploma in Fire & Safety Postgraduate Program in HSE Management NEBOSH General Certificate M.Tech in Safety or related field Experience 5 to 8 years of relevant EHS experience, preferably in: Real Estate Infrastructure Projects Large-Scale Construction Firms Skills & Competencies In-depth knowledge of EHS standards, safety regulations, and construction site risk mitigation Proficiency in safety audits, hazard identification, and preventive action planning Strong training and communication skills across multiple levels of workforce Proficiency in working languages: English, Hindi, and Marathi Qualification : BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering

Position: Technical Architect Designation: Assistant Manager Experience Required: 14 Years Location: Pune Role Overview: We are looking for an experienced Technical Architect to lead the architecture and design of embedded systems, specifically Electronic Control Units (ECUs). This role involves defining the overall hardware and software architecture, ensuring alignment with project goals, and managing cross-functional technical teams. Key Responsibilities: Serve as the technical leader for embedded system projects, primarily focused on ECU development. Define and govern end-to-end system architecture, covering both hardware and software components. Provide architectural guidance throughout the project lifecycle from concept to deployment. Collaborate closely with hardware, software, and validation & verification (V&V) teams to ensure cohesive integration. Manage and coordinate efforts across team leads from software, hardware, and V&V divisions. Review and approve technical documentation, design specifications, and system requirements. Ensure adherence to industry standards, scalability, and best practices in system architecture. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 14+ years of experience in embedded systems development with a strong background in system architecture. Proven experience in leading multidisciplinary technical teams. Solid understanding of both hardware and software aspects of embedded system design. CDAC certification in VLSI or a related domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Lead Hardware Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are seeking a highly skilled and experienced Technical Lead Hardware to lead our embedded hardware development projects. The ideal candidate will be responsible for designing and developing complete electronic circuits, creating prototypes, and managing the transition from design to production. This role also involves leading and mentoring a team of hardware engineers. Key Responsibilities: Lead the hardware development efforts for embedded system projects. Design and develop end-to-end electronic circuits and schematics. Create and test prototypes and sample hardware. Oversee the hardware lifecycle from concept through to mass production. Collaborate with cross-functional teams including firmware, mechanical, and testing teams. Guide and mentor a team of hardware engineers to meet project goals and timelines. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of hands-on experience in hardware design and development. Strong understanding of embedded system hardware design. CDAC certification in VLSI or a related specialization is a plus. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member Hardware Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a motivated and skilled Technical Member Hardware to join our hardware design team. The ideal candidate should have hands-on experience in PCB design, circuit simulation, and testing. This role offers an excellent opportunity to work on cutting-edge embedded systems hardware alongside an expert team. Key Responsibilities: Contribute to the design and development of hardware systems as part of the hardware design team. Design PCBs and perform component selection based on design requirements. Simulate circuit schematics and analyze performance. Operate high-end testing and debugging equipment in a lab environment. Perform precision soldering, including handling of SMD components. Assist in prototyping, validation, and troubleshooting of hardware systems. Contribute to documentation and design reviews. Preferred Skills: Experience with PCB design tools and simulation software. Proficient in using lab instruments such as oscilloscopes, multimeters, logic analyzers, etc. Knowledge of soldering techniques and handling fine-pitch components. Exposure to RF design will be considered a strong advantage. Qualifications: B.E./B.Tech in Electronics or Electrical Engineering. 4+ years of experience in hardware design and development. CDAC certification in VLSI or a related field is an added advantage. Qualification : B.E./B.Tech in Electronics or Electrical Engineering

Position: Technical Lead Software Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are looking for an experienced Technical Lead Software to lead the software development efforts for our ongoing embedded systems projects. The candidate will be responsible for designing and developing MISRA-compliant code based on architectural specifications or requirement documents, ensuring compatibility with in-house designed hardware. Key Responsibilities: Lead the software development activities for embedded systems projects. Design and implement MISRA-compliant embedded software from architecture or requirements documents. Ensure seamless integration and compatibility with in-house developed hardware. Develop both low-level (driver/firmware) and high-level software design components. Apply best practices in embedded coding standards, software architecture, and debugging techniques. Collaborate with hardware, testing, and system teams throughout the development lifecycle. Lead and mentor software engineers and coordinate with cross-functional teams. Required Skills: Strong knowledge of embedded C/C++ and MISRA coding standards. Experience with microcontrollers, communication protocols (SPI, I2C, UART, CAN, etc.). Expertise in debugging tools, IDEs, and version control systems. Understanding of real-time operating systems (RTOS) and device driver development. Familiarity with both low-level firmware and application-level code development. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of experience in embedded software development. CDAC certification in VLSI or a similar domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member (Verification & Validation) Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a dedicated Technical Member to join our Verification & Validation (V&V) team for ongoing embedded projects. The candidate will play a key role in ensuring the quality and reliability of our products through thorough testing at various levels. Key Responsibilities: Develop and design detailed test cases and test vectors for embedded products. Execute tests ranging from unit-level verification to full functional testing at the vehicle level. Participate in test planning, test execution, and defect tracking. Coordinate and oversee field testing and track testing during later stages of product development. Collaborate closely with hardware, software, and system teams to ensure comprehensive validation. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 4+ years of experience in verification and validation of embedded systems. Familiarity with embedded testing methodologies and tools. CDAC certification or VLSI knowledge is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Automation Engineer Location: Pune About the Role: At Acelirate, you will play a key role in designing, developing, and implementing automation solutions using UiPath. As an Automation Engineer, you ll collaborate with clients to deliver intelligent automation solutions that improve business efficiency and reduce operational costs. Key Responsibilities: Design, develop, and test automation workflows using UiPath. Utilize UiPath components such as Robots, Studio, and Orchestrator effectively. Collaborate with clients to provide automation solution designs during POCs, project implementation, and deployment of new initiatives. Modify and enhance bot code as required during implementation. Build custom activities and workflows using VB.NET or C#. Manage end-to-end testing cycles to ensure robust automation delivery. Conduct technical training sessions, deliver demos and blueprints, and provide post-deployment support to clients. Required Qualifications & Skills: Bachelor's degree in Computer Science, Information Technology, or a related field. 3+ years of experience in the IT industry with a focus on software development. At least 1.5 years of hands-on experience in designing and implementing UiPath automation workflows. Strong command of UiPath tools and offerings, with proficiency in REFramework. UiPath Advanced Developer Certification is mandatory. Strong verbal and written communication skills. Proficiency in programming/scripting languages such as VBA, VB.NET, Java, or C#. Python is a plus. Knowledge of cognitive automation tools (OCR, AI/ML) is advantageous. Experience with Document Understanding, Computer Vision, AI Center, or Action Center is a plus. Familiarity with automating legacy systems (Mainframe, SAP, Citrix) is beneficial. Exposure to other RPA tools is an added advantage. Qualification : Bachelor's degree in Computer Science, Information Technology, or a related field.

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Job Requirements Join our Engineering team We are the leading energy technology company. We are designing, assembling, and testing the latest products to help take energy forward. We collaborate with our development teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools. Partner with the best As a Function Development Engineer for Embedded Software, you will be fully involved in design, testing and deployment of new algorithms for systems operating in challenging environments. Your will be responsible for: Development of functions for data acquisition and digital signal processing Design, modelling, and simulation of mechatronic systems & controls Design of systems- and software architecture Process optimization and automation Testing of functions and systems Specification of requirements Documentation and change management processes for new product development Fuel your passion To be successful in this role you will have: Above-average university degree in Electrical Engineering, Mechanical Engineering or similar Knowledge in at least one of the following fields: Digital signal processing Measurement and control systems Communication systems engineering Experience in modelling and simulation Skilled with Matlab / Simulink Programming skills e.g. C, C++, Python Independent, proactive, self-motivated, and able to work well as part of an interdisciplinary team Good written and verbal English skills due to an international work environment, and strong interest in working with other cultures At Baker Hughes we are always searching for great talent. While we may not have a specific job for you today, we want to know about you when we do. As actual openings become available, you may be contacted to discuss a potential opportunity.

Role: Software Engineer Embedded Systems Company: Whirlpool Corporation About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, driving innovation to enhance life at home. Our iconic brands include Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2023, Whirlpool reported approximately $19 billion in annual sales, with 59,000 employees and 55 manufacturing and technology research centers worldwide. Key Highlights: #1 Fortune 500 Consumer Durable company Market leader in North America, Latin America & leading western brand in Asia Annual sales turnover of $21 billion globally 70 manufacturing & technology centers globally 3 manufacturing locations in India Role Summary We are seeking a talented software engineer with expertise in embedded software development to join Whirlpool s global software development team. This role focuses on developing software for smart and connected home appliances, contributing to next-generation IoT innovations. Key Responsibilities Design and develop embedded software for Whirlpool products, with a strong focus on IoT integration. Analyze system requirements and translate them into software architecture and development tasks. Apply state-of-the-art industry solutions and best practices in embedded development. Develop and integrate software adhering to coding standards, design documentation, and unit testing. Collaborate across functional, technical, and code reviews. Provide creative and scalable solutions to complex software challenges. Minimum Requirements Bachelor s Degree in Electronics & Telecommunication (E&TC). 10+ years experience in embedded software development and microcontroller software design. Preferred Skills & Experience Bachelor s Degree in Electrical Engineering, Computer Engineering, or Computer Science. Strong expertise in IoT systems including TCP/IP stacks, WiFi networks, BLE, and RESTful protocols. Knowledge of network protocols (HTTPS, MQTT, JSON, XML). Understanding of encryption and OTA security protocols (TLS). Proficiency in C/C++, JavaScript, Java, Python, and Shell Scripting. Experience working in resource-constrained embedded environments. Solid understanding of data structures, algorithms, object-oriented design, operating systems, networking, wireless standards, and security protocols. Strong passion for innovation, learning, and applying cutting-edge technology to consumer products. Excellent communication skills and a collaborative mindset. If you re passionate about working at the intersection of software and smart appliances, this is an excellent opportunity to join a global leader in home innovation. Qualification : Bachelors Degree in Electronics & Telecommunication (E&TC).