Embedded Hardware Jobs in Pune

Job Title: Hardware Design Engineer Location: Pune Experience: 4+ Years Qualification: B.E. / B.Tech in Electronics, Electrical, Telecommunication, or Instrumentation Engineering Job Summary We are seeking a skilled and experienced Hardware Design Engineer to join our R&D team in Pune. The ideal candidate will have a strong background in designing electronic control modules, embedded hardware, power electronics, and sensor interfacing. This role requires a hands-on engineer capable of taking designs from concept through to prototyping, testing, and production readiness. Key Responsibilities Analyze and interpret product and system requirements to define hardware architecture. Design analog and digital circuits, including microcontroller-based systems. Develop schematics using tools like OrCAD Capture or Altium Designer. Design and simulate power supplies (Buck, Boost, Linear) using tools like LTspice, PSpice, etc. Ensure EMI/EMC compliance in PCB design and overall system architecture. Develop multilayer PCBs with proper signal integrity, grounding, and thermal design practices. Interface with various digital communication protocols: UART, I2C, SPI, RS485, CAN, Ethernet. Conduct board-level debugging using tools like DSO, logic analyzers, and multimeters. Perform signal integrity analysis using Hyperlynx or Cadence SI tools. Coordinate prototyping, testing, and design validation activities. Create and maintain design documentation including schematics, BOMs, test reports, and revision control. Apply DFM/DFT principles for production-ready designs and support certification activities. Key Competencies & Skills Technical Expertise Embedded hardware design (MCU/MPU based control boards) Analog front-end and sensor interface circuits Power supply design (SMPS Buck, Boost, Linear regulators) EMI/EMC compliant PCB design (Multilayer) High-speed PCB layout understanding and design review Design simulations and circuit behavior modeling Hands-on debugging and validation Tools & Technologies Design Tools: Altium Designer, OrCAD Capture Simulation: PSpice, LTspice Debugging: DSO, Logic Analyzer, Multimeters Signal Integrity: Hyperlynx, Cadence SI Protocols: UART, I2C, SPI, CAN, RS485, Ethernet Additional Expectations Strong analytical thinking and problem-solving skills Ability to work independently and collaboratively across cross-functional teams Excellent documentation and communication skills Passion for innovation, continuous learning, and product excellence Be part of an innovative and growing hardware design team Work on advanced electrification and control systems Contribute to real-world, high-impact projects from concept to launch Qualification : B.E. / B.Tech in Electronics, Electrical, Telecommunication, or Instrumentation Engineering

Position: Technical Architect Designation: Assistant Manager Experience Required: 14 Years Location: Pune Role Overview: We are looking for an experienced Technical Architect to lead the architecture and design of embedded systems, specifically Electronic Control Units (ECUs). This role involves defining the overall hardware and software architecture, ensuring alignment with project goals, and managing cross-functional technical teams. Key Responsibilities: Serve as the technical leader for embedded system projects, primarily focused on ECU development. Define and govern end-to-end system architecture, covering both hardware and software components. Provide architectural guidance throughout the project lifecycle from concept to deployment. Collaborate closely with hardware, software, and validation & verification (V&V) teams to ensure cohesive integration. Manage and coordinate efforts across team leads from software, hardware, and V&V divisions. Review and approve technical documentation, design specifications, and system requirements. Ensure adherence to industry standards, scalability, and best practices in system architecture. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 14+ years of experience in embedded systems development with a strong background in system architecture. Proven experience in leading multidisciplinary technical teams. Solid understanding of both hardware and software aspects of embedded system design. CDAC certification in VLSI or a related domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Lead Hardware Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are seeking a highly skilled and experienced Technical Lead Hardware to lead our embedded hardware development projects. The ideal candidate will be responsible for designing and developing complete electronic circuits, creating prototypes, and managing the transition from design to production. This role also involves leading and mentoring a team of hardware engineers. Key Responsibilities: Lead the hardware development efforts for embedded system projects. Design and develop end-to-end electronic circuits and schematics. Create and test prototypes and sample hardware. Oversee the hardware lifecycle from concept through to mass production. Collaborate with cross-functional teams including firmware, mechanical, and testing teams. Guide and mentor a team of hardware engineers to meet project goals and timelines. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of hands-on experience in hardware design and development. Strong understanding of embedded system hardware design. CDAC certification in VLSI or a related specialization is a plus. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member Hardware Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a motivated and skilled Technical Member Hardware to join our hardware design team. The ideal candidate should have hands-on experience in PCB design, circuit simulation, and testing. This role offers an excellent opportunity to work on cutting-edge embedded systems hardware alongside an expert team. Key Responsibilities: Contribute to the design and development of hardware systems as part of the hardware design team. Design PCBs and perform component selection based on design requirements. Simulate circuit schematics and analyze performance. Operate high-end testing and debugging equipment in a lab environment. Perform precision soldering, including handling of SMD components. Assist in prototyping, validation, and troubleshooting of hardware systems. Contribute to documentation and design reviews. Preferred Skills: Experience with PCB design tools and simulation software. Proficient in using lab instruments such as oscilloscopes, multimeters, logic analyzers, etc. Knowledge of soldering techniques and handling fine-pitch components. Exposure to RF design will be considered a strong advantage. Qualifications: B.E./B.Tech in Electronics or Electrical Engineering. 4+ years of experience in hardware design and development. CDAC certification in VLSI or a related field is an added advantage. Qualification : B.E./B.Tech in Electronics or Electrical Engineering

Project Leader Location: Pune Experience: 4 7 Years Education: B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields Job Summary We are seeking a Project Leader with a strong background in embedded software development, preferably within the automotive domain, to lead and coordinate multiple software projects. This role requires a balance of technical proficiency and leadership capabilities to manage teams, ensure compliance with industry standards, and deliver high-quality embedded solutions on time. Key Responsibilities Lead and coordinate multiple embedded software projects from inception through completion. Ensure project timelines, milestones, and deliverables are met in accordance with customer and internal expectations. Guide teams through the Software Development Life Cycle (SDLC) following standards such as ASPICE, CMMI, or equivalent. Participate in embedded software development using languages such as C, C++, or Python. Ensure adherence to quality, safety, and cybersecurity standards including: AUTOSAR (Automotive Open System Architecture) ISO 26262 (Functional Safety) ISO 21434 (Cybersecurity) Apply problem-solving and analytical thinking to address technical challenges. Foster collaboration among cross-functional teams including software, hardware, and testing. Maintain clear documentation and communication with internal stakeholders and clients. Required Skills & Experience 4 7 years of experience in embedded software development, with leadership exposure. Strong command over programming languages: C, C++, or Python (at least one). Hands-on experience with SDLC and process compliance to ASPICE, CMMI, or similar standards. Experience in software testing methods, including unit, integration, and system testing. Knowledge of AUTOSAR, ISO 26262, and ISO 21434 standards. Strong problem-solving and analytical skills. Excellent organizational, communication, and coordination abilities. Preferred / Added Advantage Certified Scrum Master (CSM) or equivalent Agile certifications. Experience in the automotive domain (strongly preferred). Exposure to project coordination tools like Jira, Confluence, or similar platforms. Be a part of high-impact embedded projects in the automotive and industrial sectors. Work in a collaborative, innovation-driven culture with global exposure. Accelerate your career with leadership responsibilities and domain expertise. Competitive compensation and professional development opportunities. Qualification : B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields

Position: Technical Lead Software Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are looking for an experienced Technical Lead Software to lead the software development efforts for our ongoing embedded systems projects. The candidate will be responsible for designing and developing MISRA-compliant code based on architectural specifications or requirement documents, ensuring compatibility with in-house designed hardware. Key Responsibilities: Lead the software development activities for embedded systems projects. Design and implement MISRA-compliant embedded software from architecture or requirements documents. Ensure seamless integration and compatibility with in-house developed hardware. Develop both low-level (driver/firmware) and high-level software design components. Apply best practices in embedded coding standards, software architecture, and debugging techniques. Collaborate with hardware, testing, and system teams throughout the development lifecycle. Lead and mentor software engineers and coordinate with cross-functional teams. Required Skills: Strong knowledge of embedded C/C++ and MISRA coding standards. Experience with microcontrollers, communication protocols (SPI, I2C, UART, CAN, etc.). Expertise in debugging tools, IDEs, and version control systems. Understanding of real-time operating systems (RTOS) and device driver development. Familiarity with both low-level firmware and application-level code development. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of experience in embedded software development. CDAC certification in VLSI or a similar domain is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Position: Technical Member (Verification & Validation) Designation: Assistant Manager Experience Required: 4 Years Location: Pune Role Overview: We are seeking a dedicated Technical Member to join our Verification & Validation (V&V) team for ongoing embedded projects. The candidate will play a key role in ensuring the quality and reliability of our products through thorough testing at various levels. Key Responsibilities: Develop and design detailed test cases and test vectors for embedded products. Execute tests ranging from unit-level verification to full functional testing at the vehicle level. Participate in test planning, test execution, and defect tracking. Coordinate and oversee field testing and track testing during later stages of product development. Collaborate closely with hardware, software, and system teams to ensure comprehensive validation. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 4+ years of experience in verification and validation of embedded systems. Familiarity with embedded testing methodologies and tools. CDAC certification or VLSI knowledge is an added advantage. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Job Description Job Title: Electrical Designer You are a part of Hardware Engineering Group under MRI Business, located at Philips Healthcare Innovation Centre (HIC) Pune. HIC is playing a key role in Philips global strategy for Diagnostic Imaging. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards healthcare growth markets Your Role: Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications. Ensuring that the design is consistent with the higher-level architecture and requirements. Ensuring that the proposed design would have the safety, reliability and quality features built-in. Responsible for ensuring that the design meets the performance, quality and cost criteria. Conduct concept and feasibility studies. Leads the introduction of new technologies. Ensuring that there is proper documentation per standards for the developed design. Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification. Ensuring that his/her design modules meet the product certification requirements. Drawing up personal schedule and reports on progress. Defining and assessing the Work Breakdown Structure/planning/costs of his/her area. Being abreast of technical developments in own field through study of literature and technical contacts. Maintaining product and company reputation by complying with country specific regulations. Supplier evaluation and communication. You're the right fit if: Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience. Knowledge of state-of-the-art methods/tools (CAD/simulation) used in Electrical, PCB and Cable harness design. Experience in New Product Introduction (NPI), Product Life Cycle Management, Obsolescence Management/Sustenance and Value Engineering. Exposure to Analog, Mixed Signal Board Design and Power Electronics designs. Experience in 16/32-bit microcontroller-based design and interfacing. Knowledge of Cable harness design for power, analog-digital signal, Communication, RF, audio/video and fiber optics cabling. Working knowledge on the selection of electronic components, cable and connectors. Knowledge of communication interfaces like RS232, RS485, CAN, EtherCAT, Ethernet and USB. Knowledge of EMI/EMC standards and testing for conformance. Hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics). Ability to understand and debug problems across hardware/software boundaries. Should have experience in DFMEA and design of Fail-safe systems and Sub-systems. Should have good fundamental knowledge of Motors/Motor Drivers/ Position, Speed Encoders and should be able to analyze motor under different operating modes such as regenerative mode. Experience in design of a communication gateway will be an added advantage. Should have experience in design of high-speed digital interface. Knowledge of mechanical design compatibility aspects. Knowledge of IEC 60601 standards will be an added advantage. Knowledge of Embedded Software Programming will be an added advantage. Ability to understand and debug problems across hardware/software boundaries. Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage. Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc. will be an added advantage. Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent. Disciplined team worker, ability to work independently. Result oriented team player. Ability to present and articulate ideas to key stakeholders and leadership team. Excellent communication skills and Positive can do attitude. Quality mindset in design and documentation. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Qualification : Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience.

Analog Engineer Location: Pune Role Overview Join our dynamic R&D team as an Analog Engineer, contributing your expertise to develop cutting-edge electronics hardware for instrumentation products used in the process industry. This role involves close collaboration with diverse stakeholders including Digital Business Leaders, Customer Support, and Branch Engineers to ensure smooth project execution and high customer satisfaction. Occasional travel may be required to engage with vendors, stakeholders, and maintain strong customer relationships. Purpose of the Role Design and develop high-quality analog electronics hardware that meets stringent industry requirements for performance, reliability, safety, and environmental standards in instrumentation products. Technical Responsibilities Understand product requirement specifications, incorporating electrical, communication protocols, environmental, EMC, safety, industrial design, performance, and reliability standards into your designs. Design electronics circuits interfacing with various sensors, input/output signals, communication protocols (UART, RS232, RS485, I2C, SPI, HART, PROFIBUS, FIELDBUS, Wireless, etc.), display and keypad (UI) devices, microcontrollers, ADCs, DACs, display chips, and special function ICs. Develop designs suitable for 2-wire transmitters, actuators, indicators, converters, sensors (4-20mA), IEPE vibration sensors, battery-powered sensors, and wireless devices. Implement analog signal processing and control functions including scaling, amplification, filtering, integration, differentiation, multiplication, compression, clipping, clamping, linearizing, isolation, ON-OFF, PID, etc. Design linear and switching power supplies to power circuits and external devices. Implement PCB designs considering constraints such as space, parasitic effects, signal and power integrity, thermal management, RF/EMC considerations, manufacturability, and usability. Test designs thoroughly through in-house labs, external labs, and field site validations to ensure all requirements are met. Ensure adherence to target material cost budgets. Operate and utilize test and measurement instruments such as DMM, DSO, function and signal generators, pulse generators, counter timers, spectrum analyzers, LCR meters, HV testers, and network analyzers. Utilize development tools like SPICE, 3D modeling software, Mathcad, and EDA tools (Pads, Cadence) effectively. Qualification & Experience Master s or Bachelor s degree in Electronics, Electronics & Telecommunication, or equivalent discipline 4 to 5 years of relevant experience in analog hardware design for instrumentation or related fields Qualification : Masters or Bachelors degree in Electronics, Electronics & Telecommunication, or equivalent discipline

Senior Specialist, Technical Product Management | Pharmaceutical & Life Sciences | Pune, India | Merck & Co. Job Overview: Merck & Co. is seeking a Senior Specialist in Technical Product Management to join our Human Health Digital, Data, and Analytics (HHDDA) division in Pune. In this role, you will play a pivotal part in developing and activating advanced internal forecasting products aimed at optimizing the delivery of medicines to patients. You will collaborate with product management and product delivery teams to build relationships with internal customers, train activation teams, measure product success, and represent customer needs in product development. The ideal candidate will have strong leadership skills, a deep understanding of healthcare and technology, and a passion for product development. As a domain expert in Pharma, you will guide product strategies, inspire innovation, and help drive a growth mindset within the team. Key Responsibilities: Analyze business processes, user needs, and stakeholder challenges to inform product development decisions. Forecasting Expertise: Use your experience with pharma forecasting, including time-series analysis, stochastic simulation, and optimization, to drive product decisions. Voice of Customer: Act as the bridge between internal stakeholders and technical teams, ensuring the customer s voice influences product development. Collaboration & Communication: Work with cross-functional teams to define product requirements, document detailed business needs, and evaluate product features for future development. Product Strategy: Adapt product strategies and roadmaps based on market feedback and evolving customer needs. Leadership: Guide product teams, provide mentorship, and ensure alignment across product management and delivery leads. Innovative Thinking: Stay updated on industry trends in pharma, forecasting technologies, and analytics to propose new features that provide business value. What You Will Achieve: Within 3 Months: Understand the product suite and its objectives. Familiarize yourself with processes, workflows, tools, and company culture. Develop relationships with stakeholders and teams, participating in knowledge-sharing sessions and product ceremonies. Within 6 Months: Collaborate on defining business requirements for upcoming product features. Conduct gap analysis between current and desired outcomes, identifying areas for product enhancement. Within 9 Months: Represent the voice of the customer in product planning, helping to propose, prioritize, and evaluate new product features and improvements. Required Qualifications & Skills: Bachelor s Degree in Computer Science, Engineering, or an MBA (relevant certifications are a plus). 3+ years of experience in a lead product management role within the pharmaceutical or life sciences industry, with 10+ years of total experience in product management or related fields. Expertise in Pharma Forecasting: Applied experience with time-series forecasting, stochastic simulation, and optimization techniques. Experience in designing and developing embedded reporting, dashboards, and visualizations to communicate product data effectively. Strong communication and presentation skills for conveying complex concepts to stakeholders at all levels of the organization. Ability to lead and collaborate with cross-functional teams, driving product initiatives from conception to launch. Preferred Experience: Experience with advanced analytics platforms and data-driven decision-making in healthcare and pharma. Ability to thrive in a fast-paced, dynamic environment with shifting priorities. Location: Pune, India Flexible Hybrid Work Arrangements Visa Sponsorship Available At Merck & Co., we believe in driving data-driven innovation to improve healthcare outcomes globally. As a Senior Specialist in Technical Product Management, you will have the opportunity to shape the future of healthcare technology by contributing to cutting-edge forecasting tools that empower teams to make data-driven decisions. If you are passionate about product management, forecasting, and pharmaceutical innovations, this is your chance to make a significant impact. Qualification : Bachelors Degree in Computer Science, Engineering, or an MBA (relevant certifications are a plus).

Job Requirements Join our Engineering team We are the leading energy technology company. We are designing, assembling, and testing the latest products to help take energy forward. We collaborate with our development teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools. Partner with the best As a Function Development Engineer for Embedded Software, you will be fully involved in design, testing and deployment of new algorithms for systems operating in challenging environments. Your will be responsible for: Development of functions for data acquisition and digital signal processing Design, modelling, and simulation of mechatronic systems & controls Design of systems- and software architecture Process optimization and automation Testing of functions and systems Specification of requirements Documentation and change management processes for new product development Fuel your passion To be successful in this role you will have: Above-average university degree in Electrical Engineering, Mechanical Engineering or similar Knowledge in at least one of the following fields: Digital signal processing Measurement and control systems Communication systems engineering Experience in modelling and simulation Skilled with Matlab / Simulink Programming skills e.g. C, C++, Python Independent, proactive, self-motivated, and able to work well as part of an interdisciplinary team Good written and verbal English skills due to an international work environment, and strong interest in working with other cultures At Baker Hughes we are always searching for great talent. While we may not have a specific job for you today, we want to know about you when we do. As actual openings become available, you may be contacted to discuss a potential opportunity.

Role Overview Position: Hardware Engineering Lead Electronics Hardware Design As a Hardware Engineering Lead, you will spearhead the design, development, and validation of electronics hardware for advanced consumer appliances. You will drive innovation and ensure product reliability from concept to production through expertise in circuit design, PCB development, and system integration. Key Responsibilities Technical Leadership: Lead hardware design projects, guiding cross-functional teams through the entire development lifecycle. Conduct technical reviews, root cause analysis, FMEA, and validation processes to ensure robust, high-quality designs. Mentor junior engineers and influence critical design decisions. Circuit Design & PCB Development: Design analog, digital, and mixed-signal circuits, including motor controllers, power supplies (AC/DC, DC/DC), and microcontroller-based systems. Develop schematics, perform circuit simulations (PSPICE, LTSPICE), and oversee PCB layout (using tools like Cadence Allegro). Optimize designs for manufacturability, testability, and regulatory compliance (UL, IEC, CE, BIS). System Integration: Collaborate with system architects and cross-disciplinary teams to integrate hardware solutions into product platforms. Manage component selection, de-rating analysis, and supplier coordination to meet performance, cost, and reliability goals. Qualifications Minimum Requirements: Bachelor's Degree in Electrical Engineering, Power Electronics, Electronics & Telecommunication Engineering, or a related field. Preferred: Master s Degree in Electrical or Power Electronics Engineering. Experience: 10+ years of experience in electronics hardware design for consumer appliances or similar industries. Preferred Skills & Expertise Strong hands-on experience in DC/DC SMPS and Linear Power Supply Design (flyback, buck converter, linear regulators). Expertise in component selection (resistors, capacitors, diodes, transistors, MOSFETs, IGBTs, gate drivers) and circuit protection (over-current/voltage protection). Proven track record in EMI/EMC design and troubleshooting. Proficient in performing detailed design calculations for currents and voltages across components. Skilled in using lab instruments (Power Supplies, Oscilloscopes, Logic Analyzers, Power Analyzers). Experience with engineering documentation (Test Plans, Test Reports, ECNs, Hardware Design Documents, Derating Analysis). Research mindset to explore innovative concepts and guide future product development. Ability to identify cost-effective technologies suited for mass production. Strong knowledge of magnetic design (inductors, transformers) for power electronics applications. Understanding of thermal management and EMC considerations in power electronics design. Familiarity with safety standards and regulations relevant to product design and certification. If you are passionate about driving innovation and want to work at the forefront of appliance technology, we d love to hear from you. Qualification : Bachelor's Degree in Electrical Engineering, Power Electronics, Electronics & Telecommunication Engineering, or a related field.

Job Title: Technical Support Engineer II Location: Pune Experience: 2 5 Years Company: TraceLink Department: Support and Service Company Overview: TraceLink s innovative software solutions and Opus Platform empower the pharmaceutical industry to digitize their supply chain, enhancing compliance, visibility, and decision-making. Our technology helps reduce disruptions in medicine supply, ensuring patients worldwide receive the treatments they need. Founded in 2009, TraceLink has expanded to 8 offices globally, with over 800 employees and more than 1,300 customers across 60+ countries. We are recognized as an industry leader by Gartner and IDC, and celebrated for our positive company culture by Comparably. Position Overview: As a Technical Support Engineer II, you will play a vital role within our Support and Service organization to ensure customer success and satisfaction. Your technical expertise and problem-solving skills will be key to helping customers implement and utilize TraceLink s Life Sciences Cloud solutions effectively. This role requires strong interpersonal skills combined with experience in web applications, UNIX systems, scripting, and troubleshooting complex technical issues. Key Responsibilities: Engage directly with customers and internal teams to understand, document, troubleshoot, and resolve technical issues efficiently Develop and improve standard troubleshooting procedures and tools for recurring issues Collaborate closely with Product Management, Engineering, and Quality Assurance teams to facilitate timely resolution of customer-reported problems Provide excellent customer communication and ensure timely updates on issue status Skills and Qualifications: Proven experience supporting proprietary, enterprise-level software applications Strong customer-oriented communication skills with a professional, friendly attitude Excellent verbal and written communication abilities Strong analytical mindset with great attention to detail Proficiency with UNIX command line, especially in parsing and analyzing data sets Bachelor s degree in Computer Science, Information Technology, or a related field 2 to 5 years of experience in a technical support or troubleshooting role Ability to read, parse, and manipulate technical data formats such as XML, EDI, CSV Working knowledge of B2B communication protocols like AS2, SFTP, and Web Services Experience with scripting languages (e.g., Perl, Python, Shell) is a plus Familiarity with supply chain software and pharmaceutical industry knowledge preferred Flexibility to work shifts across Americas, EMEA, and India/APAC time zones (daytime, evening, and overnight) Work with cutting-edge cloud technology impacting patient safety worldwide Collaborate with a global, high-performing team Opportunity for career growth in a fast-paced, innovative environment Support an industry leader with a commitment to employee growth and culture Qualification : Bachelors degree in Computer Science, Information Technology, or a related field

Position: Technical Support Specialist Location: Pune, Maharashtra, India Shift: Night shift, 6 PM 3 AM IST (On-site at Koregaon Park office, 5 days a week) Our Mission: Healthcare should be seamless for patients. Zocdoc empowers patients by offering an easy-to-use marketplace for booking in-person or virtual healthcare across the U.S., improving quality and affordability. Your Impact on Our Mission: As a Technical Support Specialist, you ll be the go-to expert providing timely, effective technical support to Zocdoc employees both remotely and onsite. You ll help maintain IT service quality, troubleshoot issues, and support hardware and software needs, ensuring smooth day-to-day operations. What You ll Do Daily: Provide first- and second-level technical support for network issues (LAN, WAN, Wi-Fi, VPN). Monitor and troubleshoot network devices and connectivity, escalating complex problems as needed. Support PC/Mac desktop issues, hardware repairs, and software applications. Assist with IT operational tasks like desk setups, inventory audits, and meeting room configurations. Manage systems administration for core IT services, including SaaS tools and process automation. Handle onboarding/offboarding workflows including machine imaging and account configuration. Maintain detailed documentation for IT systems and processes. Communicate promptly and clearly throughout ticket resolution to meet SLAs and ensure high user satisfaction. What You ll Need to Succeed: Bachelor s degree in Computer Science or relevant IT certifications and experience. 2+ years in technical support/helpdesk roles. Strong customer service skills and problem-solving mindset. Experience with Google Workspace admin, AzureAD, Intune, JAMF/JSS Suite. Hands-on troubleshooting skills for Windows and Mac environments. Knowledge of Windows Server, Active Directory, LDAP, DHCP, SSO, MFA. Familiarity with tools like Jira, Confluence, Slack, Bettercloud. Basic scripting skills (BASH, PowerShell, or similar). Benefits: Competitive salary and medical insurance. Perks including daily catered lunch, Ping Pong, daycare reimbursement. Wellness programs like Headspace and BetterLYF counseling. Cellphone and wifi reimbursement, parental leave, sabbatical after 5 years. Annual health check-ups and generous paid time off. Work with a smart, supportive team at a certified Great Place to Work. About Zocdoc: Zocdoc is the U.S. s leading digital health marketplace, connecting millions of patients with healthcare providers to improve the healthcare experience. Founded in 2007, Zocdoc emphasizes diversity, collaboration, and a mission-driven culture.

Job Summary: We are seeking a Technical Consultant with 3 to 5 years of experience in Oracle Applications to provide IT production support for our organization. The ideal candidate will have experience in diagnosing and troubleshooting issues with Oracle systems, as well as implementing and supporting processes related to Oracle applications. This role requires the ability to manage reported issues, ensure the effectiveness of resolutions, and support stakeholders effectively. Key Responsibilities: 1. IT Production Support: Provide production support for Oracle Applications, including PL/SQL, Forms, Reports, Workflows, BI Publisher Reports, MWA, OA Framework, and interfaces. Diagnose and troubleshoot issues related to hardware and software components, working towards timely resolutions. Maintain and update process documentation and standards. 2. Incident and Problem Management: Use the Incident Management system to log, manage, and track reported issues or requests from end users. Ensure proper documentation of actions taken to resolve incidents. Implement systematic problem-solving processes to identify the root causes of recurring issues and provide long-term solutions. 3. Troubleshooting & Support: Resolve customer-identified issues in a timely and efficient manner while adhering to department standards. Train less experienced associates on IT support processes, tools, and troubleshooting methods. Encourage root cause analysis to ensure effective long-term solutions. 4. Collaboration & Stakeholder Management: Work collaboratively with cross-functional teams to meet shared objectives and ensure customer satisfaction. Balance the needs of multiple stakeholders and ensure that commitments are met. Communicate effectively with various audiences to convey clear and actionable insights. 5. Process Improvement: Continuously assess and improve existing work processes for greater efficiency. Apply situational adaptability when addressing shifting demands and challenges. 6. Production Support & System Enhancements: Assist with production support activities, ensuring the smooth operation of systems. Support Oracle Applications implementations, upgrades, and enhancements, ensuring successful delivery. Competencies & Skills: Action Oriented: Ability to approach challenges with enthusiasm, energy, and urgency. Problem Solving: Systematically analyze issues, applying industry-standard methodologies to identify solutions. Incident Management: Proficient in using Incident Management systems for tracking, resolution, and reporting. Collaboration & Communication: Strong interpersonal skills to work with diverse teams and stakeholders. Technical Expertise: Expertise in Oracle Applications (PL/SQL, Forms, Reports, Workflows, BI Publisher, MWA, OA Framework, etc.). Situational Adaptability: Adapt approach and demeanor according to shifting business needs and situations. Accountability: Strong sense of accountability and responsibility for meeting deadlines and commitments. Qualifications: Education: High school diploma or equivalent is required. An Associate Degree or relevant certifications in Oracle or related fields is preferred. Experience: 3 to 5 years of experience as a Technical Consultant in Oracle Applications. Must have experience in PL/SQL, Forms, Reports, Workflows, BI Publisher, and other Oracle-related technologies. Familiarity with Purchasing processes in Oracle Applications is preferred. Experience with production support activities, implementations, and upgrades is a plus. Desired Skills: Technical Knowledge: Proficient in PL/SQL, Forms, Reports, Workflows, BI Publisher Reports, MWA, OA Framework, and integrations. Functional Knowledge: Experience in Purchasing processes and Oracle Financials is preferred. Licensing Requirements: This position may require licensing for compliance with export controls or sanctions regulations. Benefits: Competitive salary and benefits package. Professional growth and career advancement opportunities. Collaborative and supportive team environment. Flexibility and work-life balance. This is an exciting opportunity to leverage your Oracle Applications expertise while contributing to the success of a growing team. Apply today to be part of our dynamic organization! Qualification : An Associate Degree or relevant certifications in Oracle or related fields is preferred.

Job Summary: We are looking for an Engineering Systems Support Manager to oversee the installation, support, and improvement of engineering software and systems. The ideal candidate will have a strong background in providing technical support, managing system changes, and ensuring the effective operation of engineering tools. This role combines managerial responsibilities with hands-on technical expertise in supporting and improving engineering software. Managerial Responsibilities (30%): 1. Software Installation & Licensing: Assist with the installation and troubleshooting of engineering software and resolve any licensing or access control issues. 2. Helpdesk Support: Resolve helpdesk tickets and provide customer support for installations, training, and ongoing application support for assigned products. 3. System Changes & Implementations: Support major system changes, including new hardware and software implementations, ensuring smooth transitions and minimal disruption. 4. Engineering Systems Development: Coordinate engineering systems development by managing planning, scheduling, ordering, and tracking related tasks. 5. Improvement Projects: Participate in improvement projects and conduct team audits, taking corrective actions when necessary to ensure process and product quality. General Professional Practice (GPP) Responsibilities (70%): 1. Technical Support: Maintain a mid-level understanding of Windows or UNIX operating systems and interfaces to provide effective support for engineering tools. 2. Cross-functional Reviews: Participate in cross-functional reviews, collecting data and metrics using tools like Six Sigma to identify areas for improvement. 3. Process Improvement Tools: Track processes, monitor system performance, and utilize tracking systems and other improvement tools to identify areas of improvement. 4. Corrective Actions: Implement corrective actions based on problem reports and change requests, ensuring that software products meet high-quality standards. 5. Customer & Supplier Interface: Serve as the point of contact between customers, suppliers, engineers, and other functions to ensure smooth operations and communication. 6. Documentation & Reporting: Document tasks and report progress on systems and tools such as CGT Windchill, CREO, and AutoCAD. Create assemblies and drawings in CREO, ensuring adherence to GD&T standards and product knowledge. Competencies & Skills: Engineering Software Application: Ability to support and certify engineering software to enable efficiency for engineering users. Customer Focus: Build and maintain strong customer relationships, delivering customer-centric solutions. Collaboration: Effectively work with cross-functional teams to achieve shared objectives. Problem-Solving: Take corrective actions based on problem reports and change requests to improve system quality. Communication Skills: Develop and deliver communications that are clear and tailored to different audiences. Interpersonal Savvy: Relate comfortably with diverse groups and build strong relationships both within and outside the organization. Trust & Integrity: Gain the confidence and trust of others through honesty and authenticity. Values Differences: Recognize and appreciate diverse perspectives within the organization. Qualifications: Education: High school diploma or equivalent required. A two-year associate s degree or relevant certification from an accredited institution in a STEM field is preferred. Experience: Intermediate-level work experience in engineering systems support or related roles, gained through education, training, or hands-on experience. Experience in managing engineering software, providing helpdesk support, and implementing systems changes is a plus. Licensing Requirements: May require licensing for compliance with export controls or sanctions regulations. Benefits: Competitive salary and benefits package. Opportunity for professional growth and career advancement. Supportive, collaborative work environment. Flexible working hours and work-life balance initiatives. This role provides a unique opportunity to combine technical expertise with managerial responsibilities in a dynamic engineering environment. Apply today to be part of a team focused on innovation and continuous improvement!

Software Developer (.Net) Designation: Software Engineer Location: Pune Experience Required: 5 10 years Qualifications: B.E. in IT/Computer Science/Electronics/EC Engineering/MCA/MCS/M.Sc. in Computer Science Technical Skills & Technologies Required: Strong understanding of Object-Oriented Programming (OOP) Experience with .NET Framework and C# Proficient in front-end technologies: JavaScript, HTML5, CSS Familiarity with SPA frameworks (Vue.js, React.js, or Angular.js) Ability to develop both desktop and web applications Strong analytical and requirement analysis skills Experience with OOAD and UML for software design Familiarity with version control systems (Git, SVN, ClearCase, etc.) Preferred: Experience in desktop application development (WinForms or WPF) Experience with TypeScript for front-end development Knowledge of ASP.NET Web services and REST APIs Familiarity with microservices architecture Communication with hardware devices (Serial, Ethernet, OPC, Modbus) Knowledge of SOLID principles and design patterns Experience with unit testing frameworks (NUnit, XUnit, etc.) Key Responsibilities Take ownership of requirements and defect resolution Analyze requirements and propose technical solutions Work with the Lead to design and document software solutions Adhere to development best practices Identify risks and manage tasks proactively Provide technical guidance and mentorship to junior team members Behavioral Competencies Team-oriented and collaborative Open to learning new technologies Agile and adaptable in fast-paced environments Self-motivated and result-oriented Qualification : B.E. in IT/Computer Science/Electronics/EC Engineering/MCA/MCS/M.Sc. in Computer Science

Junior Technical Writer Location: Pune Experience Required: 1 2 years Qualifications: B.E./B.Tech in Electrical, Instrumentation, Electronics, Mechatronics, or MSc Electronics Technical Skills & Core Competencies Mandatory Engineering Knowledge: Automation Industry: Proven experience with OEMs or System Integrators. PLC Programming: Functional knowledge of Ladder Logic or Structured Text. Industrial Lifecycle: Experience in Design, Commissioning, FAT, and SAT processes. Hardware & Networking: Familiarity with PLC backplane/remote I/Os and Fieldbus technologies (e.g., EtherCAT, PROFINET, Ethernet/IP, CAN). Writing & Software Skills: Communication: Excellent written and verbal English for technical documentation. Tools: Proficiency in Microsoft Office; experience with HTML/XML formats is highly preferred. Preferred Tech: Knowledge of VFDs, Servos, or programming in Python, C, or C++. Primary Roles & Responsibilities SME Collaboration: Work closely with Subject Matter Experts to translate complex technical requirements into clear documentation. Document Design: Create, proofread, and update technical manuals in HTML/XML. Continuous Learning: Actively develop skills in Python programming and system testing. Behavioral Traits Learning Mindset: Eagerness to learn new technologies and Agile methodologies. Team Dynamics: Strong collaboration skills and a proactive, self-motivated approach. Adaptability: Ability to pivot quickly as project priorities change. Qualification : B.E./B.Tech in Electrical, Instrumentation, Electronics, Mechatronics, or MSc Electronics

Job Title: Security Engineer Location: Pune We are looking for a skilled Security Engineer to join our Cloud Infrastructure & Security team. In this role, you will be responsible for managing and securing all aspects of e-commerce product security and compliance within the AWS cloud environment. The ideal candidate will have a strong background in application and infrastructure security, vulnerability assessment, penetration testing, and a proven track record of participating in security audits. Key Responsibilities: Lead and participate in security audits across multiple environments, including web security, application security, mobile app security, network security, and IT infrastructure security. Conduct thorough Vulnerability Assessments and Penetration Testing (VAPT) to identify and mitigate potential risks in applications, AWS resources, configurations, and IT infrastructure. Collaborate with cross-functional teams to ensure the security of the e-commerce products, proactively identifying gaps in security and implementing the necessary controls. Prepare detailed VAPT reports using predefined templates and assist in finalizing audit reports for management. Coordinate with relevant teams to ensure timely resolution of identified security issues. Create and maintain security checklists, test cases, and test scenarios to facilitate security audits and penetration tests. Implement industry-standard security controls for AWS resources, including vulnerability management and configuration hardening. Perform penetration tests on computer systems, networks, and applications, identifying weaknesses and recommending solutions. Conduct physical security assessments of systems, servers, and network devices, focusing on firewall maintenance, network security, and other critical infrastructure components. Provide regular updates to management regarding security findings, vulnerabilities, and remediation plans. Review and offer actionable feedback on information security issues, collaborating with engineering teams to ensure timely fixes. Drive improvements in security services, including hardware, software, policies, and procedures. Identify areas for enhancing security education and awareness among internal users. Stay current with the latest malware and security threats, ensuring that the security strategy is responsive to new challenges. Manage and monitor security operations with AWS, XDR/EDR, Microsoft O365 security, and SaaS-based applications. Desired Skills & Experience: 5+ years of experience in AWS application and infrastructure security, Vulnerability Assessment, and Penetration Testing. At least 2 security audits completed, with at least one audit performed in the past 12 months. Solid experience working in heterogeneous environments and specifically with AWS Cloud. Product-based company experience is a plus. Hands-on expertise with VAPT using industry-standard tools such as Qualys, Nessus, WebInspect, Acunetix, Metasploit, Burp Suite Pro, Netsparker, etc. Strong experience with Linux administration and security (hardening servers according to industry best practices). Familiarity with OWASP security requirements and experience implementing them across applications and infrastructure. Proficiency in penetration testing on web and mobile applications, cloud environments, and network infrastructures. AWS Security experience is mandatory. Experience with XDR/EDR, Microsoft O365 security, and SaaS security is highly desirable. Strong analytical skills and the ability to identify vulnerabilities and risks across platforms. Certifications: CCNA, CompTIA+, or similar; AWS Security Specialty or similar certifications are preferred. Excellent communication skills, with the ability to collaborate effectively with both technical and non-technical teams. Strong organizational skills and the ability to prioritize tasks effectively. Ability to work with a product-ownership mindset while maintaining security across all systems and applications. What We Offer: Competitive salary and benefits. A dynamic and collaborative work environment where innovation and security are top priorities. Opportunities for continuous learning and career growth in the field of cloud and cybersecurity. If you have a passion for security, experience with AWS, and want to be part of a growing team protecting critical infrastructure, apply today!

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering