Engineer Electrical Jobs in Bengaluru

Engineer MEP (Mechanical, Electrical, Plumbing) Education: BE (Electrical/Mechanical) Experience: 2 6 years Location: Bangalore Job Overview We are looking for a dedicated MEP Engineer to join our team and ensure the successful execution of mechanical, electrical, and plumbing works on our projects. You will be responsible for overseeing the installation, testing, and commissioning of MEP systems, ensuring they meet the project s technical specifications, safety standards, and schedule. You will collaborate with contractors, consultants, and internal teams to ensure the highest quality of work and efficient progress throughout the project lifecycle. Key Responsibilities MEP Installation & Supervision: Oversee the installation, inspection, and testing of MEP equipment, fittings, and systems, ensuring compliance with project specifications and consultant requirements. Quality & Schedule Control: Ensure that MEP work is carried out according to approved drawings and within the designated timeframes, aligning with the overall construction program. Coordination & Execution: Coordinate with contractors and agencies to ensure that MEP work is executed efficiently, maintaining high standards of quality, speed, economy, and safety. Drawing Analysis & Feedback: Study and review project drawings and provide feedback or suggestions for improvement, if necessary. Material Management: Prepare bills for materials and services raised by contractors on-site, and raise requisitions for any additional materials needed. Site Supervision: Conduct daily site walk-throughs and closely monitor the progress of subcontractor work, ensuring it adheres to standards. Installation Methods & Sequence: Stay informed of best practices for installation methods and ensure the correct sequence of MEP work is followed on-site. Reporting & Documentation: Prepare technical reports, drawings, and specifications related to MEP work and ensure all documentation is accurate and up-to-date. Material Inspection: Inspect incoming MEP materials for quality and compliance with IS codes, BOQs, and project specifications. Required Skills Strong knowledge of Electrical & Fire Systems, HVAC (Heating, Ventilation, and Air Conditioning), and Plumbing systems. Familiarity with IS codes and BOQs for MEP materials and construction standards. Proficiency in reviewing and interpreting technical drawings, specifications, and project documentation. Excellent site supervision and coordination skills with the ability to manage multiple tasks simultaneously. Ability to handle material requisitions and ensure timely procurement of necessary supplies. Good communication skills to work effectively with contractors, consultants, and internal teams. Qualifications BE in Electrical Engineering or Mechanical Engineering. 2 6 years of experience in MEP systems, preferably in construction or infrastructure projects. Qualification : BE in Electrical Engineering or Mechanical Engineering

Functional Safety Engineer Location: Bangalore Experience: 3 6 Years Education: B.E / B.Tech / M.E / M.Tech in Electronics, Electrical, Computer Science, or a related field Job Summary We are seeking a skilled and motivated Functional Safety Engineer to join our automotive embedded systems team. The ideal candidate will have hands-on experience with ISO 26262, strong embedded C programming knowledge, and a solid understanding of the software development lifecycle. This role is critical in ensuring that all safety-critical systems are developed in compliance with industry safety standards and regulations. Key Responsibilities Develop and maintain the Functional Safety Management System (FSMS) in line with ISO 26262 standards. Conduct hazard analysis and risk assessments (HARA) for automotive embedded systems. Define, allocate, and manage functional and technical safety requirements across hardware and software components. Support and guide development teams in achieving ASIL (Automotive Safety Integrity Level) compliance. Collaborate with hardware and software teams to ensure safety mechanisms are implemented and validated effectively. Prepare and maintain safety-related documentation, including Safety Plans, Safety Cases, and Safety Analyses (FMEA, FTA, DFA, etc.). Ensure traceability of safety requirements throughout the SDLC, using appropriate tools and processes. Participate in reviews, audits, and assessments to ensure continuous compliance with ISO 26262. Support safety validation and verification activities. Required Skills & Experience 3 6 years of experience in Functional Safety Engineering, with a minimum of 2+ years working specifically with ISO 26262. Proficient in Embedded C programming, with exposure to real-time embedded systems. Strong understanding of the Software Development Life Cycle (SDLC) in safety-critical environments. Good analytical and problem-solving skills. Effective communication and collaboration skills to work with cross-functional teams. Preferred / Added Advantage Experience in the automotive domain (e.g., ADAS, powertrain, or body control modules). Familiarity with automotive communication protocols (CAN, LIN, FlexRay). Exposure to toolchains like DOORS, Polarion, or Jama for requirement and safety management. Knowledge of complementary standards such as ISO 21434 (Cybersecurity) or IEC 61508. Work on innovative and safety-critical projects for global automotive clients. Opportunity to deepen your expertise in functional safety and ISO 26262. Collaborate with a high-caliber team in a technically driven environment. Competitive compensation, learning opportunities, and career advancement paths. Qualification : .E / B.Tech / M.E / M.Tech in Electronics, Electrical, Computer Science, or a related field

After Sales Engineer Location: Bangalore Department: Service & Support Role Summary Fracktal Works is seeking a committed and technically skilled After Sales Engineer to join our support team in Bangalore. This role is crucial in delivering a high-quality post-sales experience through equipment servicing, preventive maintenance, troubleshooting, and customer interaction. Candidates should have a solid understanding of electromechanical systems and be comfortable working hands-on in dynamic environments. Education & Experience Education: ITI or Diploma in Electrical, Electronics, or Mechanical Engineering Experience: 1 3 years in servicing 2D/3D printers, SPM machines, or similar electromechanical systems Key Responsibilities Perform installation, repair, servicing, and preventive maintenance of 3D printers and related electromechanical equipment. Troubleshoot and resolve basic electrical, electronic, and mechanical issues in the field or remotely. Maintain and update service documentation, reports, and customer records. Use basic 3D modeling tools such as AutoCAD or Fusion 360 for component understanding and communication. Build and maintain positive customer relationships to ensure high satisfaction and repeat business. Manage service tickets and turnaround times using tools like Zoho Desk. Be willing to travel for on-site customer support across locations. Coordinate with internal teams for spare parts, technical escalation, and service planning. Ensure proper communication with customers regarding service status, preventive maintenance schedules, and equipment health. Required Skills & Qualifications Proven experience working with electromechanical systems (preferably in 2D/3D printing or SPM equipment). Basic knowledge of electrical and electronic systems, and mechanical components. Strong troubleshooting skills and a methodical approach to diagnosing issues. Familiarity with CAD software like AutoCAD or Fusion 360. Good verbal and written communication skills. Ability to manage tasks independently, handle customer interactions professionally, and maintain service quality standards. At Fracktal Works, you ll be part of a fast-growing company at the forefront of 3D printing technology. As an After Sales Engineer, you ll play a key role in ensuring our customers receive outstanding support and performance from our products, helping drive long-term satisfaction and trust. Qualification : Diploma in Electrical, Electronics, or Mechanical Engineering

MEP Engineer Location: Bengaluru Qualification: B.Tech (Mechanical / Electrical) Experience: 6+ years Job Description We are looking for a skilled and detail-oriented MEP Engineer to oversee the Mechanical, Electrical, and Plumbing systems for our construction and infrastructure projects. The ideal candidate should have hands-on experience in MEP design coordination, execution, and site supervision, ensuring quality, safety, and compliance with project specifications. Key Responsibilities Plan, review, and manage the execution of MEP works (HVAC, electrical, plumbing, fire-fighting, etc.) at project sites. Coordinate with architects, structural engineers, consultants, and contractors to ensure seamless integration of MEP services. Review technical drawings, specifications, and BOQs for accuracy and alignment with project requirements. Monitor MEP installation activities to ensure compliance with design, quality, and safety standards. Conduct regular site inspections and testing of MEP systems. Identify and resolve any on-site technical issues related to MEP services. Assist in procurement of MEP materials and ensure timely delivery. Support project managers in preparing progress reports and documentation. Required Skills & Experience B.Tech in Mechanical or Electrical Engineering. Minimum 6 years of experience in MEP coordination and execution in construction or infrastructure projects. Good understanding of HVAC, electrical systems, water supply, drainage, and fire safety systems. Proficient in reading technical drawings and using AutoCAD or related software. Strong problem-solving, coordination, and communication skills. Knowledge of applicable building codes and safety regulations. Qualification : B.Tech in Mechanical or Electrical Engineering

Distinguished Engineer Machine Learning Engineering Location: Bangalore Company: Capital One India About Us At Capital One India, we re redefining how technology powers financial services. Our teams work in a fast-paced, intellectually rigorous environment to tackle complex business challenges at scale. By harnessing the power of advanced analytics, data science, and machine learning, we create innovative, patentable solutions that transform customer experiences and drive the business forward. Team Overview: Machine Learning Experience (MLX) The MLX team leads Capital One s mission to build scalable, well-managed ML systems and platforms. We empower teams across the enterprise to develop, govern, and deploy machine learning models efficiently, securely, and at scale. From automated model governance to observability platforms, MLX enables end-to-end ML lifecycle management laying the foundation for AI-driven innovation across the organization. Role Overview We re looking for a Distinguished Engineer Machine Learning Engineering to join our MLX team. In this high-impact role, you'll architect and implement the platforms and tools that support model observability, automated governance, and ML model deployment at scale. This is an opportunity to drive enterprise-wide innovation and shape how ML is integrated into Capital One s core business systems. What You ll Do Design and build systems that capture and analyze large-scale model and feature metadata, including training metrics and runtime performance, to power model observability and governance automation. Partner with cross-functional teams including product managers, designers, and platform engineers to create scalable solutions that accelerate ML model lifecycle management. Lead efforts to enable automated governance decisions for ML models, ensuring compliance, auditability, and operational integrity. Architect and implement high-performance data pipelines that feed ML models with real-time and batch data. Contribute to the design and implementation of cloud-native ML systems using tools such as AWS, Kubernetes, and Terraform. Write clean, scalable, production-grade code in languages like Python, Go, or Java. Implement CI/CD pipelines, testing frameworks, and monitoring systems for ML applications. Drive the adoption of best practices in ML Ops, observability, and platform resilience. Basic Qualifications Master s Degree in Computer Science or related field. 15+ years of experience in software engineering or solution architecture. 10+ years building data-intensive, distributed computing systems. 10+ years programming in Python, Go, or Java. 8+ years of hands-on experience with industry-leading ML frameworks (e.g., Scikit-learn, TensorFlow, PyTorch, Dask, Spark). Preferred Qualifications PhD or Master's in Computer Science, Electrical Engineering, Mathematics, or related field. 5+ years of experience building, scaling, and optimizing production ML systems. Deep expertise in data preparation, feature engineering, and ML pipeline optimization. 10+ years writing performant, maintainable, and resilient production code. Strong experience deploying ML solutions on public cloud platforms (AWS, Azure, GCP). Expertise in distributed systems, file systems, or multi-node databases. Open-source contributor to ML tools or libraries. Published work in ML (papers, patents, blogs, etc.). 5+ years of experience in ML Ops (using MLflow, TFX, Kubeflow, etc.). Experience with LLMs and Generative AI applications (open-source or commercial models). Proven experience designing production-ready observability platforms for ML applications. Be at the forefront of building scalable, secure, and enterprise-grade ML platforms. Shape the future of AI and ML adoption in a top-tier financial institution. Collaborate with world-class engineers and data scientists. Solve real-world problems with high business impact. Thrive in a diverse, inclusive, and innovation-focused culture. Qualification : PhD or Master's in Computer Science, Electrical Engineering, Mathematics, or related field

Job Title: Trainee Engineer Sales (Industrial Automation) Location: Bangalore Reporting To: Manager Sales Experience: 0 to 1 Year Languages: English & Regional Language Education: B.E / B.Tech in Electrical & Electronics Engineering (EEE), Electronics & Communication Engineering (ECE), Mechatronics, or Electrical & Instrumentation (E&I) Must-Have Skills Strong communication and presentation skills. Willingness to travel extensively. Ability to build customer rapport and support pre-sales activities. Effective team coordination and collaboration. Verbal communication proficiency in local language. Market strategy analysis capability. Good to Have Skills Proficiency in MS Office. Additional computer skills, including SAP knowledge, is a plus. Job Description Develop and execute a comprehensive sales plan to drive business growth within assigned accounts, territories, or industries. Identify and target new or dormant customers within the specified territory or industry. Analyze customer needs and leverage MVGL s resources to fulfill those requirements. Build and maintain a prospect list to create sales opportunities. Maintain an active sales funnel to meet or exceed sales targets. Conduct daily sales calls and engagements within assigned accounts or territories. Qualify leads, follow up on opportunities, and close sales within assigned territories. Gain hands-on experience in sales within the industrial automation sector. Work with a dynamic team focused on innovation and customer success. Opportunity for growth and career development within a leading company. Qualification : B.E / B.Tech in Electrical & Electronics Engineering (EEE), Electronics & Communication Engineering (ECE), Mechatronics, or Electrical & Instrumentation (E&I)

Job Title: Principal Electronics Engineer Embedded Hardware Location: Bengaluru Experience: 8 14 years Industry: Automotive / EV / Manufacturing Employment Type: Full-time About Ultraviolette Join the Charge. Create the Future. At Ultraviolette, we are more than just a company we re a movement that s reshaping the future of electric mobility. From building India s fastest electric motorcycle to designing the world s most advanced electric scooter, we thrive on pushing the boundaries of what s possible. We are a team of engineers, designers, and trailblazers united by a passion to craft machines that are sustainable, intelligent, and exhilarating. Every bolt, every line of code, and every component is designed with a singular mission: to accelerate the global shift toward next-generation mobility. Role Overview We are looking for a Principal / Lead Electronics Engineer Embedded Hardware to take ownership of vehicle electronics architecture, embedded systems design, diagnostics, and system-level validation for our next-gen electric vehicles. In this role, you will be at the forefront of developing high-performance electronic control units, telematics, and connected systems for future-ready vehicles. You will drive architecture decisions, system integration, and compliance, working alongside cross-functional teams to bring innovation from concept to the street. Key Responsibilities 1. Vehicle Electronics Architecture Design and bring to production electronic hardware including ECUs, display clusters, and telematics modules. Develop high-speed embedded designs with RF, sensor integration, and communication interfaces (CAN, LIN, UART, SPI, I2C). Create and maintain system schematics, architecture documentation, and interface definitions. 2. Embedded Hardware Design Develop embedded platforms with high-performance microcontrollers/processors to support vision systems, graphics, radar/LiDAR, audio, and OS-based applications. Architect and validate connected systems involving GNSS, LTE, BLE, Wi-Fi. Lead the design and integration of vehicle subsystems like lighting, clusters, IMUs, and more. Collaborate closely with firmware teams on hardware-software integration, bootloaders, and OTA functionality. 3. Diagnostics & Compliance Implement UDS-based diagnostics, fault logging systems, and service tools. Ensure compliance with AIS-004, ISO 26262, and other automotive design standards. 4. Testing & Validation Define and execute component-level and vehicle-level validation test plans. Utilize tools like Vector CANoe, CANalyzer, ETAS INCA, oscilloscopes, and spectrum/network analyzers for debugging and validation. 5. Cross-functional Collaboration Partner with teams across mechanical, software, UX, powertrain, and wire harness for holistic system integration. Work with mobile and cloud teams to enable real-time data streaming, diagnostics, and OTA updates. Actively contribute in design reviews, DFMEAs, and root cause analyses of field issues. Required Qualifications & Skills B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines. 8+ years of embedded hardware design experience, preferably in 2W/EV/automotive domain. Strong understanding of embedded C and scripting languages (e.g., Python, MATLAB, Octave). Experience with circuit simulation tools (e.g., PSPICE, LTSPICE, SIMPLIS, Simetrix). Hands-on expertise in RF design, signal/power integrity, EMI/EMC compliant layouts. Proficiency in PCB design tools (e.g., OrCAD, Altium, Mentor Graphics). Demonstrated experience in designing systems with multi-core processors, memory chips, SoMs, and high-speed interfaces (USB, Ethernet, LVDS, MIPI). Deep knowledge of embedded communication protocols (CAN, LIN, SPI, UART, I2C). Strong debugging and problem-solving skills in hardware validation and field testing. Nice to Have Hands-on experience in vehicle electronics development for 2W, 4W, or electric vehicles. Familiarity with DFT/DFA (Design for Testing/Assembly) methodologies. Experience with manufacturing and compliance testing for embedded hardware. Background in developing connected vehicle ecosystems with OTA capabilities. Passionate about emerging technologies in mobility, EVs, and embedded systems. Be part of India s electric mobility revolution where engineering meets adrenaline. Work on world-class technologies that are pushing global boundaries. Join a culture that encourages innovation, learning, and ownership. Collaborate with passionate teams building next-gen mobility experiences. Qualification : B.E. / M.E. / B.Tech / M.Tech in Electronics, Electrical, Mechatronics, or related disciplines

Job Title: Industrialization Engineer Location: Bengaluru, India Experience Required: 5 10 years Industry: Electronics / Electric Vehicles Employment Type: Full-time Company: Ultraviolette Automotive Pvt Ltd Join the Charge. Create the Future. At Ultraviolette, we are redefining mobility. From building India s fastest electric motorcycle to developing the world s most advanced electric scooter, we thrive on innovation, bold thinking, and performance that thrills. We're a diverse, passionate team of engineers, designers, and creators united by one mission: to build machines that are not only sustainable, but exhilarating. If you re driven by purpose and ready to shape the future of mobility, this is your moment. Role Overview: We are looking for a technically strong and hands-on Industrialization Engineer (Electronics) to lead the transition from R&D prototypes to scalable, high-quality mass production. In this cross-functional role, you will work at the intersection of design, manufacturing, sourcing, and embedded systems, ensuring our products are built for scale, reliability, and performance without compromising innovation. Key Responsibilities: Technical Ownership & Industrialization: Lead industrialization from EVT (Engineering Validation Test) to DVT (Design Validation Test) and PVT (Production Validation Test), up to mass production. Translate R&D designs into production-ready documentation (BOMs, Gerbers, PCBA specs, test jigs, etc.). Conduct Design for Manufacturability (DFM) and Design for Testability (DFT) reviews. Own ramp-up metrics such as yield, test coverage, defect trends, and field return analysis. Collaborate with R&D teams on thermal design, layout optimization, and component derating strategies. Ensure compliance with voltage isolation, creepage/clearance, and relevant safety standards. Supplier & EMS Collaboration: Act as a technical bridge between internal teams and EMS vendors, ensuring alignment from design to execution. Coordinate with EMS on NPI builds, process validation, line setup, and FAI (First Article Inspection). Support firmware flashing, version control, and hardware-software integration testing at production lines. Assist in troubleshooting mechanical, electrical, or firmware-related issues during production. Component Engineering & Cost Optimization: Evaluate and qualify alternate components and suppliers. Drive cost engineering and BOM optimization without compromising on quality. Engage in component lifecycle management and ensure availability through the production lifecycle. Required Qualifications & Skills: B.E./B.Tech in Electronics, Electrical, or related field 5 10 years experience in hardware industrialization, preferably in EV or electronics manufacturing Strong knowledge of PCB design reviews, SMT/PCBA processes, and box build Hands-on with tools like Altium, OrCAD, or similar for PCB-level evaluations Experience with ICT/FCT test setups, test fixture design, and test station validation Basic embedded systems understanding firmware flashing, serial log analysis, GPIO testing Experience working directly with EMS vendors, test labs, and component suppliers Excellent cross-functional communication skills Willing to travel to EMS or supplier sites for builds and validation Nice to Have (Preferred): Familiarity with FMEA, APQP, PPAP, ISO/IATF 16949 processes Knowledge of compliance and safety standards (e.g., IEC, ISO 26262) Background in value engineering, cost-down programs, and process audits Work on industry-defining EV products with world-class engineering challenges Collaborate with cutting-edge R&D and manufacturing teams Be part of a mission-led company that s changing the landscape of mobility A workplace culture that values ownership, audacity, and excellence Apply now and be a part of something bigger. Let s create the future together. Qualification : B.E./B.Tech in Electronics, Electrical, or related field

Customer Support Engineer (CSE) Department: Technical Location: Bangalore Job Description The Customer Support Engineer (CSE) will be responsible for the maintenance, troubleshooting, and repair of Stratasys 3D printing equipment to ensure high customer satisfaction. This role involves direct interaction with customers, managing service calls, and maintaining equipment to the highest standards while following established procedures. Key Responsibilities Perform basic troubleshooting, installation, maintenance, and repair of Stratasys 3D printing equipment. Complete scheduled Preventative Maintenance and implement field modifications as required. Escalate unresolved technical issues to OEM teams following standard procedures. Maintain accurate and timely service logs, customer records, and internal documentation. Communicate regularly with customers to provide updates, resolve issues, and ensure proper follow-up. Ensure all tools and test equipment are properly maintained and calibrated. Adhere to Health and Safety regulations and other applicable regulatory requirements. Identify and support sales opportunities including new contracts, renewals, and system sales. Manage multiple open service issues efficiently, prioritizing tasks effectively. Requirements Educational Qualification: BE/B.Tech in Electrical Engineering or Mechanical Engineering. Diploma with 3+ years of experience servicing and operating 3D printing machines. Experience: Minimum of 3 years in a customer support or technical service role, preferably with experience in 3D printing equipment. Skills: Strong technical troubleshooting and problem-solving skills. Excellent communication and customer service abilities. Ability to manage multiple tasks and prioritize effectively. Qualification : BE/B.Tech in Electrical Engineering or Mechanical Engineering

Job Title: Senior System Engineer Job Type: Full-Time Location: Bangalore Experience Required: 5 10 Years Education: B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation Job Summary: We are looking for an experienced and technically proficient Senior System Engineer to lead the design, analysis, and testing of RF systems. The ideal candidate will have a strong background in RF principles, hardware testing, and system-level design, along with the capability to manage projects and mentor junior engineers. Key Responsibilities: Design, develop, and analyze RF systems from concept through to production. Perform system-level analysis including link budgets, acquisition, and tracking especially in applications like GPS satellite systems. Use simulation tools to model and optimize RF system performance. Conduct testing using RF test equipment such as signal generators, oscilloscopes, and spectrum analyzers. Lead and support hardware qualification processes, including environmental testing. Ensure adherence to hardware lifecycle quality processes. Collaborate with cross-functional teams across hardware, software, and testing domains. Mentor junior engineers and assist in technical project management and execution. Required Skills & Qualifications: Strong foundation in RF design principles and system architecture. Hands-on experience with RF simulation tools and measurement equipment. Knowledge of GPS systems including acquisition and tracking techniques. Familiarity with environmental and qualification testing for hardware components. Understanding of hardware lifecycle and quality standards. Proven ability to mentor and guide junior team members. Strong analytical, documentation, and communication skills. Qualification : B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation

Job Title: System Engineer Job Type: Full-Time Location: Bangalore Experience Required: 2 3 Years Education: B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation Job Summary: We are looking for a motivated System Engineer with a foundational understanding of RF systems and hands-on experience working with electronic hardware. The ideal candidate should be capable of interpreting schematics and working with standard lab equipment to support system integration and validation tasks. Key Responsibilities: Assist in the design, testing, and validation of RF-based systems. Interpret and analyze hardware block diagrams and schematics. Support schematic reviews and perform basic schematic design activities. Operate and utilize test equipment such as spectrum analyzers, multi-meters, and oscilloscopes. Work on basic concepts of acquisition and tracking, especially in systems like GPS satellite receivers. Collaborate with the hardware and system teams to support integration, debugging, and testing activities. Required Skills & Qualifications: Educational background in ECE, EEE, or Instrumentation. Basic knowledge of RF systems and principles. Familiarity with electronic schematics and hardware block diagrams. Ability to use electronic test instruments (Spectrum Analyzer, Oscilloscope, Multi-Meter). Understanding of GPS signal acquisition and tracking is a plus. Good communication skills and willingness to learn and grow in a technical environment. Qualification : B.E / B.Tech in Electronics & Communication (ECE), Electrical & Electronics (EEE), or Instrumentation

Job Title: Sales Engineer GNSS Modules Job Type: Full-Time Location: Bangalore Experience Required: 3 5 Years Education Qualification: B.E / B.Tech in Electronics & Communication (ECE) or Electrical & Electronics (EEE) Job Summary: We are seeking a dynamic and driven Sales Engineer with a strong background in GNSS modules, electronic components, or embedded solutions. The ideal candidate will be responsible for driving sales growth, managing customer relationships, and collaborating with both internal and external stakeholders to ensure successful product delivery and support. Key Responsibilities: Lead sales efforts for GNSS modules, from lead generation and customer acquisition to closure and post-sales support. Develop and manage relationships with key stakeholders in customer organizations including engineering, procurement, and finance teams. Identify and pursue new business opportunities in the embedded systems, IoT, electronics, and telecom segments. Work closely with internal manufacturing, logistics, and finance teams to ensure timely and efficient product delivery. Conduct technical presentations, product demos, and commercial negotiations to convert leads into long-term customers. Monitor market trends, customer needs, and competitor activity to identify growth opportunities. Ensure accurate sales forecasting, pipeline management, and regular reporting to management. Meet or exceed sales targets with a proactive, disciplined, and strategic sales approach. Required Skills & Qualifications: Proven experience in technical sales of GNSS modules, electronic components, or related embedded/IoT solutions. Strong understanding of B2B sales cycles, especially in electronics, telecom, or embedded systems domains. Excellent communication, presentation, and negotiation skills. Ability to build and maintain long-term client relationships. Self-motivated, target-driven, and result-oriented with a focus on customer success. Highly organized with a structured and disciplined approach to sales execution. Qualification : B.E / B.Tech in Electronics & Communication (ECE) or Electrical & Electronics (EEE)

Job Title: Mechanical Design Engineer Location: Bengaluru Experience Required: 2 to 4 years Minimum Qualification: Bachelor of Engineering (BE) Key Skills Mechanical Product Design 3D Modeling (NX or SolidWorks) Engineering Drawing & Documentation Prototyping & Testing FEA & Tolerance Stack-Up Analysis DFMEA & Risk Assessment Cross-functional Collaboration Supplier & Manufacturing Support Job Summary We are looking for a talented and detail-oriented Mechanical Design Engineer to support the development of innovative mechanical products from concept through to production. The ideal candidate will have 2 4 years of hands-on experience in mechanical design, a strong grasp of engineering principles, and a passion for problem-solving and continuous improvement. Key Responsibilities Support mechanical design efforts for new product development from concept to launch. Create detailed 3D models, engineering drawings, and Bills of Materials (BOMs) using NX or SolidWorks. Build and test prototypes to validate design concepts and performance. Collaborate closely with electrical, software, industrial design, and manufacturing teams. Evaluate material choices, manufacturing processes, and cost implications during the design phase. Perform tolerance stack-up analyses, finite element analysis (FEA), and other engineering calculations. Participate in and support design reviews, DFMEA sessions, and risk assessments. Liaise with suppliers and contract manufacturers to ensure design integrity through production. Maintain accurate documentation in line with engineering change control and regulatory requirements. Contribute to continuous improvement initiatives and intellectual property (IP) development. Qualification : Bachelor of Engineering (BE)

Electrical System Installation (ESI) Engineer Experience: 3 12 Years Location: Bangalore Role Overview: We are looking for an experienced Electrical System Installation Engineer / Technical Leader to support electrical harness design and installation projects, primarily in aerospace programs such as Airbus A320. This role requires managing design synchronization, modification processes, and ensuring compliance with Airbus design standards and processes. The candidate will work closely with cross-functional teams and design offices to deliver consistent, high-quality electrical system installations. Key Responsibilities: Coordinate and synchronize design activities with various design offices and project teams (e.g., DDMS projects) Manage the complete modification process from Change Request initiation to drawing delivery Establish and maintain design-related processes, methods, and tools to ensure full consistency and coherence Provide accurate and timely reporting to the Head of Project Support system installation design, follow-up, and validation checks Create and maintain drawing sets for Harness Design, Installation, VKE, Equipment Installation, Heater Installation, VU/VE Design Ensure compliance with Airbus installation rules and processes throughout the project lifecycle Qualifications: 3 to 12 years of hands-on experience in Electrical System Installation with strong DMU skills for harness modeling and installation analysis within A320/SA projects Good understanding of Airbus-specific tools and processes including Configuration Management, EHI Concept Design, Electrical Bracket Positioning, IP and UID proposals Experience in system installation design and support activities (design follow-up, installation checks) Knowledge of Functional Electrics (FE) including Configuration Management, Design, RDR & DQN instructions, and support on delivery checks is a plus Familiarity with Design Organization Approval (DOA) is advantageous Technical Skills: Expertise in Catia V5, VPM, PDMLink, PASS SSI / CCD, TAKSY, AIRINA, IPM4Legacy, and other Airbus customized tools Proficient in MS Office applications (Word, PowerPoint, Excel)

Job Title: Design Engineer Location: Bengaluru, Karnataka No. of Positions: 1 2 Industry: Home Automation & AV, Building Automation Joining: Immediate About EBSL Automat Pvt. Ltd. EBSL Automat is a leading provider of innovative home automation solutions, dedicated to enhancing everyday living through intelligent technologies. With a strong presence in the smart living and building automation industry, we offer an exciting and collaborative environment for engineering professionals to grow, innovate, and contribute to transformative projects. Position Overview We are looking for a Design Engineer with a passion for CAD modeling, automation, and system development. This role involves collaborating with engineering, drafting, and operations teams to develop accurate, efficient, and high-quality design solutions. If you're technically inclined, detail-oriented, and eager to contribute to cutting-edge smart automation systems, this opportunity is for you. Key Responsibilities Assist in the development and implementation of CAD modeling and drafting standards for consistent documentation and design. Collaborate with cross-functional teams to incorporate Design for Manufacturability (DFM) and Design for Assembly (DFA) into models and technical drawings. Continuously improve design automation processes to boost efficiency and accuracy. Support engineering operations with tools like spreadsheets, parts lists, BOM (Bill of Materials) generation, and calculation templates. Develop internal system procedures to maintain high-quality standards aligned with industry best practices. Document technical procedures, user manuals, and training materials. Provide technical training and support to team members when needed. Contribute to other engineering or development projects as assigned. Skills & Experience Must-Have: Bachelor's degree in Electrical Engineering or a related field. 1 4 years of relevant experience in industrial or design automation. Good verbal and written communication skills. Team player with the ability to work under tight deadlines. Strong attention to detail, creative problem-solving skills, and analytical thinking. Proficiency in CAD software and understanding of design principles. Experience with engineering tools, ERP systems, and MS Office Suite (Excel, Word, Outlook). Preferred/Good-to-Have: Experience in CAD automation or engineering application development (2+ years preferred). Ability to work as a full-stack developer (desktop, web, client platforms) is a plus. Passion for programming and self-driven learning. Ability to work in flexible shifts as required. Familiarity with home automation or building systems is advantageous. Who Can Apply Candidates with 1 4 years of relevant experience. Freshers with strong academic backgrounds and a passion for design & automation are also encouraged to apply. If you're looking to contribute to the future of intelligent living while advancing your engineering career, we invite you to be part of the EBSL Automat journey. Qualification : Bachelor's degree in Electrical Engineering or a related field

Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 1 Year Openings: 1 About the Role: As a DCS Engineer, you will report to the Assistant Manager Engineering Services. Your primary purpose will be to manage the complete product lifecycle for DCS applications, encompassing software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role that requires both strong analytical skills and a readiness to travel. What You'll Do: DCS Software Development: Develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Configuration: Gain hands-on experience and apply your knowledge in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Commissioning & Testing: Lead and execute the programming, commissioning, and testing of 800xA systems on-site. Customer Support: Provide excellent customer handling and support for Factory Acceptance Testing (FAT), ensuring client satisfaction. Project Lifecycle Management: Take responsibility for the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel extensively to customer sites across India for commissioning activities. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: 0 to 1 year of experience in a relevant engineering role. Technical Skills: Strong knowledge and hands-on experience with ABB 800xA Software Development. Proficiency in Control Builder, PG2 Graphics, Communication Protocols, and AC800M Hardware. Demonstrated experience in the complete project lifecycle from software development to commissioning in ABB 800xA. Excellent analytical skills to troubleshoot and optimize systems. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Good communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India.

Junior Engineer - Distributed Control Systems (DCS) Location: Bengaluru Experience: 0 - 2 Years Openings: 1 About the Role: As a Junior DCS Engineer, you'll report to the Assistant Manager Engineering Services. Your primary purpose will be to support the complete product lifecycle for DCS applications, focusing on software application development, hardware programming, and crucial commissioning and testing activities. This is a hands-on technical role ideal for someone looking to build their expertise in industrial automation, requiring both analytical skills and a readiness to travel. What You'll Do: HMI Graphic Development: Develop and design Human-Machine Interface (HMI) graphics for DCS systems, ensuring intuitive and effective user interfaces. DCS Software Development: Assist with and learn to develop and program software applications for Distributed Control Systems, with a focus on ABB 800xA. System Programming & Commissioning: Participate in the programming, commissioning, and testing of 800xA systems on-site, gaining practical experience in live environments. Project Lifecycle Support: Support the team across the entire project lifecycle, from initial software development through to final commissioning. Travel: Be prepared to travel to customer sites across India for commissioning activities as needed. What We're Looking For: Educational Qualification: A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication. Experience: Candidates with 0-2 years of experience in industrial automation, control systems, or relevant project work will be considered. Technical Skills: Good analytical skills to understand and troubleshoot system functionalities. An understanding of the complete project lifecycle from software development to commissioning, especially in ABB 800xA, is highly beneficial. Willingness to learn and grow in a technical environment. Software Proficiency: Strong knowledge of Microsoft Office, Excel, and PowerPoint. Communication: Strong communication skills in English for effective internal and external interactions. Physical Requirements: Must be physically fit and willing to travel to customer locations across all regions of India. If you're a recent graduate or early-career engineer with a passion for DCS systems and eager to launch your career in industrial automation, we encourage you to apply! Qualification : A Bachelor's degree in Electrical and Electronics Engineering (EEE), Instrumentation, Electronics, or Electronics & Communication

Position: Electrical Engineer Location: Bengaluru, Karnataka, India Reporting To: Project Manager Industry: Semiconductor / Automation Qualifications: Education: Bachelor of Engineering (BE) in Electrical Engineering (Mandatory) Experience: 2 to 5 years in related fields (Control Panels, Power Calculations, Circuit Breakers) Software: Proficient in AutoCAD Electrical 2018 or later Candidate Profile: Preferably from Semiconductor Industry or Automation Sector. Hands-on experience in electrical design and control panel schematics. Essential Skills and Experience: Minimum 1 year experience creating detailed point-to-point schematics for Control Panels, Motor Control Centres, Power Distribution Panels. Minimum 2 years of electrical design experience including: Power calculations Component selection Schematic and Bill of Materials (BOM) creation I/O list creation Wire, cable, and harness selection/design Sensor selection (voltage, current, arc, temperature, etc.) Working knowledge of circuit components such as circuit breakers, contactors, relays, protection relays, push buttons, indicators, connectors, terminal blocks, cable routing accessories, and sensors. Desirable Skills: Familiarity with various process sensors: pressure, vacuum, flow, distance, displacement, proximity, limit, rotary and linear position sensors. Knowledge of EMI/EMC principles and panel design. Working knowledge of motor control systems. Responsibilities: Conduct professional electrical engineering research, design, development, modification, and testing related to electrical systems and power distribution/generation. Collaborate with a multidisciplinary engineering team (electrical, mechanical, software, technical support, productivity engineers, suppliers) on design and modifications. Maintain and develop process checkpoints to ensure compliance with design standards and project schedules. Drive process improvements in collaboration with leadership peers. Create electrical schematics and systems based on requirements; generate and release engineering drawings and BOMs. Assist in developing and refining functional specifications for electrical systems and power distribution. Qualification : Bachelor of Engineering (BE) in Electrical Engineering (Mandatory)

Job Title: Automation & Instrumentation Engineer Location: Bengaluru Role and Responsibilities Electrical Integration: Integrate CyRo s electrical systems (power supplies, sensors, actuators) with customer equipment and facilities, ensuring seamless compatibility and reliability. Design and implement custom electrical interfaces such as harnesses, connectors, and junction boxes to connect CyRo systems with customer-specific infrastructure (e.g., conveyors, AMRs, SCADA). Configure and validate CyRo s Industrial PC (IPC) and control systems to enable smooth communication with customer devices and networks. Sensor and Actuator Configuration: Configure, calibrate, and optimize CyRo s sensors (vision systems, force-torque sensors) and actuators (grippers, motion controllers, robotic arms) to fulfill application-specific needs. Troubleshoot sensor and actuator performance during integration to ensure alignment with customer workflows. Safety and Compliance: Design and implement safety-rated electrical systems including emergency stop circuits, light curtains, and safety interlocks, adhering to industry standards such as ISO 13849 and IEC 61508. Conduct risk assessments and incorporate protective components like fuses, circuit breakers, and relays to guarantee system safety and reliability. Deployment and Commissioning Support: Support deployment and commissioning of CyRo systems in customer environments, ensuring proper electrical integration and functionality. Diagnose and resolve electrical issues onsite, collaborating with customer teams and internal stakeholders. Assist in validation tests to confirm system performance and compliance in real-world scenarios. Documentation and Training: Prepare detailed documentation including electrical schematics, wiring diagrams, and integration guides for customers. Develop and conduct training sessions for customer teams on operation, maintenance, and troubleshooting of CyRo electrical systems. Maintain accurate records of integration designs, test results, and customer feedback to drive continuous improvement. Skills and Experience Strong proficiency in electrical system design covering wiring, connectors, and power distribution. Experience integrating robotic and automation machinery within industrial customer environments. Hands-on expertise with industrial sensors (vision, force-torque) and actuators (grippers, motion controllers, robots). Solid understanding and implementation experience of industrial communication protocols such as EtherCAT, Modbus, TCP/IP. Familiarity with safety-rated electrical systems and relevant industry standards (ISO, IEC, OSHA). Experience configuring and integrating IPCs, PLCs, and similar control hardware. Proven troubleshooting and optimization skills in live industrial settings. Excellent communication and teamwork abilities for cross-functional collaboration and client interactions. Required Qualifications Bachelor s or Master s degree in Electrical Engineering, Mechatronics, or related disciplines. Minimum 3 years experience in electrical systems design, automation, and system integration. Strong knowledge of industrial communication protocols, safety compliance, and electrical design fundamentals. Demonstrated success in deploying and integrating automation systems in industrial environments. Additional Preferred Qualifications Experience with cobots and industrial robotic arms. Familiarity with LabVIEW and C++ programming. Knowledge of integration with enterprise systems such as WMS, OMS, ERP. Experience with IIoT devices and SCADA systems. Qualification : Bachelors or Masters degree in Electrical Engineering, Mechatronics, or related disciplines.

Electrical Principal Engineer FPGA Team Location: Bengaluru, India Team: Electrical Engineering Company: Dell Technologies Role Overview As a Principal Electrical Engineer, you will contribute to the architecture, design, and validation of FPGA-based hardware systems for Dell s next-generation enterprise servers. This role involves working across global teams to deliver robust, scalable, and efficient PCBA (Printed Circuit Board Assembly) and logic solutions that align with industry standards and internal requirements. Key Responsibilities Architect and design next-gen hardware features in collaboration with front-end teams and partners. Analyze and recommend trade-offs in design features and costs. Guide global teams with best practices in electronic hardware design. Own and deliver system interfaces and support cross-functional development efforts. Create comprehensive documentation for testing and validation. Essential Requirements 8 12 years of experience in FPGA hardware verification using Verilog, SystemVerilog, VHDL. Expertise in UVM, ABV (Assertion-Based Verification), code coverage, and unit-level simulation. Knowledge in digital design methodologies: CDC (Clock Domain Crossing) RDC (Reset Domain Crossing) Static timing analysis Experience with x86 or ARM architectures. Familiarity with peripheral protocols: I2C, I3C, SMBus, IPMI, IPMB. Strong background in both analog and digital design. Understanding of hardware/software co-design and debugging complex systems. Desirable Qualifications Experience with Intel/AMD x86 and ARM-based systems. Hands-on with FPGA tools: Xilinx, Lattice, Altera Quartus, ModelSim/QuestaSim. Passion for mentoring and knowledge sharing. Dell Technologies offers a collaborative and innovative environment where hardware engineers work at the forefront of industry advancements. You'll be empowered to lead cutting-edge hardware projects, influence product design, and make a lasting impact on the future of enterprise technology.