Equipment Calibration Jobs in Coimbatore

Job Title: Engineer OSP Fabrication Department: Vendor Development Job Location: Coimbatore Experience: 4-6 Years Qualification: B.E/DIP in Mechanical Number of Positions: 1 Job Description: We are seeking a highly skilled Engineer OSP Fabrication to join our Vendor Development team. This role focuses on improving vendor performance, ensuring high-quality standards, and optimizing cost efficiency in fabrication processes. You will be responsible for managing suppliers, addressing production challenges, and ensuring that all customer-specific requirements are met. Key Responsibilities: Improving Vendor Performance: Work closely with vendors to enhance their capabilities in design, product development, costing, quality, and logistics. Managing Supplier Quality: Oversee the quality control process from prototype production to commercial manufacturing, ensuring vendors meet the required standards. Supporting Production Issues: Troubleshoot and support issues related to current production to minimize disruptions. Developing New Suppliers: Identify and develop new suppliers to reduce costs and increase production capacity while maintaining high-quality standards. Auditing Suppliers: Perform audits of suppliers to ensure compliance with internal processes and quality benchmarks. Managing Customer-Specific Requirements: Handle customer-specific requirements by working closely with stakeholders to meet exact specifications. Costing: Prepare cost calculations based on drawings, ensuring cost efficiency, and securing approval from management for proposed solutions. Skills & Qualifications: Experience: Minimum 4 years of experience in vendor development, fabrication, and cost working in a manufacturing environment. Technical Proficiency: Strong understanding of fabrication processes, quality management, and cost control. Stakeholder Management: Ability to effectively influence and collaborate with various stakeholders to drive project success. Communication Skills: Strong verbal and written communication skills with the ability to present technical information clearly. Analytical Skills: Ability to analyze data, identify issues, and propose improvements that align with business objectives. Proficiency with Numbers: Comfortable working with cost data and financial analysis to make informed decisions. Education & Experience: Educational Qualification: B.E/DIP in Mechanical Engineering (or equivalent). Experience: 4-6 years of relevant experience in vendor development, fabrication, and costing. What s in It for You: Opportunity to contribute to high-impact projects in a collaborative and dynamic work environment. Work with industry-leading suppliers and partners. Competitive salary and benefits. Qualification : B.E/DIP in Mechanical Engineering (or equivalent).

Position: Technician Assembly (Air Intake) Location: Coimbatore Department: Assembly Air Intake Employee Type: Staff Purpose of the Role Execute **assembly activities for metallic parts** as per daily production plan. Ensure responsiveness to customer needs and **timely delivery**. Maintain quality standards to achieve **zero-defect output**. Optimize **resource utilization**, including materials, tools, and machinery. **100% adherence to standard operating procedures (SOPs)** for defect-free component delivery. Key Responsibilities & Accountabilities Assembly Operations & Quality Execute assembly tasks for **on-time delivery of defect-free products**. Follow assembly processes and **suggest improvements** for quality, delivery, and cost reduction. Maintain **Cost of Poor Quality (COPQ)** within acceptable limits. Analyze and resolve customer complaints using **QC story methodology**. Execute daily workloads, adhering to **cycle times**. Collect **BOM parts** and verify against router & MTS for operations. Manufacture **FAI and production parts with 100% quality**. Perform **Bush & Helicoil, pin installation**, and other specialized assembly operations. Training & Supervision Guide and provide **on-the-job training** to fresh technicians to improve skill levels. Track operator performance, provide feedback, and drive **continuous skill development**. Equipment & Tools Management Ensure machines and tools are **functioning correctly** to meet production targets. Follow assembly work instructions using **pneumatic hand tools and cutting tools**. Maintain knowledge of **consumables specifications**, preparation, application, shelf life, and expiry. Check **jigs & fixtures calibration** before starting work. Ensure inspection parameters are adhered to as per MTS, recording in **SIR reports** with calibrated instruments. Process & Systems Compliance Update **ERP** with stage completion after finishing work order operations. Achieve **OLE (Work Order Scanning) above 90%** as planned. Follow **PPE guidelines**, identify **near-miss incidents**, and implement monthly **Kaizen initiatives**. Continuous Improvement & Learning Collaborate with the automation team to identify use cases and implement **process improvement initiatives**. Stay updated on latest technologies and tools in assembly; suggest and implement them where applicable.

Position: Technician Sheet Metal Location: Coimbatore Department: Sheet Metal Value Concept Forming Employee Type: Staff Job Overview We are seeking a skilled and detail-oriented Sheet Metal Technician with experience in **blacksmithing** to join our team. The ideal candidate will be proficient in metal shaping, forging, and processing, with strong technical knowledge of **furnaces, welding, and metalworking tools**. Key Responsibilities Furnace Operation: Operate furnaces and metal heating equipment to achieve desired metal temperatures. Shaping & Forging: Shape and forge metal using anvils, blacksmithing hand tools, and power tools. Welding: Perform welding and join metals accurately. Preparation: Measure and prepare metals for heating and processing. Material Selection: Select and apply appropriate filler metals as needed. Monitoring: Monitor furnace operations to prevent damage and maintain consistent temperature. Smithing Techniques: Apply smithing techniques for shaping and forming metals. Safety & Maintenance: Load and handle raw materials into furnaces safely. Maintain and operate machinery while following safety protocols and wearing protective gear. Quality Control: Ensure metal processing aligns with production specifications and quality standards. Required Skills & Competencies Technical Proficiency: Machine Control, Tool Management, Metal Cutting, Metal Processing. Temperature Control: Ability to ensure correct metal temperature and prevent damage during processing. Forging Expertise: Expertise in forging techniques and blacksmithing hand tools. Aptitude: Strong visualization, originality, and fluency of ideas. Precision: Arm-hand steadiness and precision in metalwork. Process Knowledge: Knowledge of production processes, quality control, and material handling. Required Knowledge Fine Arts: Understanding of composition, design, and visual aesthetics. Design: Ability to read and interpret **blueprints, technical drawings, and models**. Computers & Electronics: Basic knowledge of electronic tools and equipment for process monitoring. English Language: Effective communication and understanding of technical instructions. Production & Processing: Knowledge of raw materials, manufacturing processes, and cost-effective production techniques. Required Experience & Education Experience: Prior work experience as a **Blacksmith or in sheet metal forming**. Education: Master of Engineering (MEng), Bachelor of Engineering (BE), Master of Science (MS), Associate of Science (AS), or Associate of Arts & Sciences (AAS). Personal Attributes Attention to detail and precision in execution. Creative problem-solving abilities. Ability to work safely under high-temperature conditions. Strong teamwork and communication skills. Qualification : Master of Engineering (MEng), Bachelor of Engineering (BE), Master of Science (MS), Associate of Science (AS), or Associate of Arts & Sciences (AAS)

Position: Sheet Metal Technician 80T Punch Press Location: Coimbatore Department: Sheet Metal Value Concept 80T Punch Press Employee Type: Staff Experience: 3 7 years Purpose of the Role Complete **shift-wise production targets** efficiently. Maintain **machine performance, utilization, and uptime**. Achieve **100% quality** for all manufactured parts. Implement and follow **Total Quality Management (TQM)** initiatives. Key Responsibilities Production & Operations Ensure all materials and resources are ready for manufacturing. Operate machines efficiently to meet production targets. Observe, identify, and report **abnormalities** through supervisors. Ensure **first-part self-inspection** and approval before QA submission. Record process details accurately in machine log registers. Ensure finished products match router quantity and quality requirements. Stack each finished part correctly in zip-lock covers or bins. Achieve **machine utilization of over 90%** consistently. Equipment & Maintenance Maintain machines in **proper working condition**, including lubrication. Arrange and set up material handling equipment and machinery. Ensure measuring instruments are in **good condition and calibrated**. Allocate work to employees during machine breakdowns or idle time. Quality & Continuous Improvement Study drawings, customer specifications, and tools to understand requirements. Develop and **improve manufacturing processes** based on product requirements. Ensure strict adherence to **TQM initiatives and quality standards**. Support process improvement activities to enhance efficiency and reduce scrap. Safety & Compliance Maintain a **safe and clean workplace** at all times. Follow all **safety rules, regulations, and company policies**.

Senior DFT Engineer Location: Coimbatore Job Type: Full Time Experience: Minimum 4 8 Years About the Role: We are seeking a Senior DFT Engineer with strong experience in Design-for-Test implementation for complex SoC/ASIC designs. The ideal candidate will be responsible for developing and integrating DFT architectures to ensure optimal test coverage, manufacturability, and debug capability of silicon designs. Key Responsibilities: Define and implement DFT architecture for SoCs and ASICs, including scan insertion, boundary scan (JTAG/IEEE 1149.1), MBIST (Memory BIST), and logic BIST. Work with RTL designers to integrate scan chains and test logic into the design while maintaining timing and area constraints. Generate and simulate ATPG (Automatic Test Pattern Generation) vectors for scan and stuck-at/fault models. Develop MBIST controllers and work with memory compilers/IP vendors to ensure BIST compatibility. Collaborate with physical design teams for DFT-related floorplanning, synthesis, and timing closure. Support silicon bring-up, test vector validation, and ATE (Automated Test Equipment) support during production testing. Run DFT verification flows, identify issues, and work cross-functionally to resolve them. Ensure compliance with test coverage goals and generate detailed reports using tools like Tetramax, TestKompress, or Mentor Tessent. Required Skills & Experience: Bachelor s or Master s degree in Electronics, Electrical Engineering, or related field. 4 8 years of hands-on experience in DFT implementation for ASIC/SoC designs. Strong experience with: Scan insertion and ATPG MBIST/logic BIST JTAG and boundary scan (IEEE 1149.x standards) Proficiency in DFT tools such as: Synopsys Tetramax/DCT Cadence Modus Mentor Tessent Scripting skills in TCL, Perl, or Python for DFT automation. Good understanding of digital design, RTL (Verilog/VHDL), synthesis, and timing analysis (STA). Experience in DFT sign-off and handling silicon test/debug is a strong plus. Nice to Have: Experience in low power DFT and DFT for hierarchical designs. Familiarity with industry standard ATEs (Advantest, Teradyne). Exposure to ISO26262 (for automotive) or other quality standards. Experience working with chip bring-up teams or foundry interfaces. Soft Skills: Strong problem-solving and debugging skills. Good communication and collaboration abilities. Ability to work independently and in cross-functional teams. Detail-oriented with strong documentation skills. Qualification : Bachelors or Masters degree in Electronics, Electrical Engineering, or related field

Job Title: Manager Product Management Department: Product Management Location: Coimbatore Experience: 8-14 Years Qualification: B.E Mechanical, Mining Engineering Number of Positions: 1 Job Description: We are looking for an experienced Manager Product Management to lead and implement business development initiatives for our crushing and screening business. The ideal candidate will have a deep understanding of market requirements, customer needs, and technical product solutions, and will work closely with various internal stakeholders, including Business Development, Engineering, and Spares teams. This role focuses on driving product development, enhancing market positioning, and ensuring the successful launch of new products. Key Responsibilities: Business Development: Develop and implement business strategies in alignment with the company s overall business goals, focusing on the crushing and screening market. Customer Engagement: Engage with customers to solve queries, understand their needs, and provide effective technical solutions. Product Development: Collaborate with the Engineering team to define product requirements, specifications, and roadmaps based on market demands and customer feedback. Product Lifecycle Support: Support the Engineering team throughout the product development lifecycle, from ideation and concept development to prototyping, testing, and final release. Market Positioning & Strategy: Develop strategies to enhance the product s value proposition, positioning, and differentiation in the market. Work with Engineering and the Head of Spares & Product Management to drive these initiatives. Product Documentation & Sales Support: Create and update technical documentation, USPs, and literature to support training. Provide product insights and support to the Sales & BD teams. New Product Launch: Co-develop plans for new product launches with cross-functional teams, ensuring the timely delivery and quality of new products. Market & Competitor Analysis: Conduct in-depth market and competitor analysis to identify trends, competitor pricing, and opportunities for product differentiation. Industry Standards & Technology Insights: Stay updated on industry standards, regulations, and emerging technologies related to crushing and screening equipment. Provide proactive insights to management. Stakeholder Relationship Management: Build and maintain strong relationships with key stakeholders and customers to foster profitable business partnerships. Performance Analysis & Optimization: Monitor product performance metrics and quality, identify areas for improvement, and ensure customer satisfaction and sales revenue growth. Skills & Competencies: Proven Experience: Significant experience as a Product Manager or in a similar role within the crushing, screening, and washing equipment manufacturing industry. Technical Expertise: Strong technical knowledge of crushing, screening, and washing equipment, including design, functionality, and applications. Analytical Skills: Strong analytical and project management skills with a proven ability to analyze market trends, customer needs, and competitive landscapes. Travel Willingness: Willingness to travel for customer visits, market studies, trade shows, and industry events. Leadership & Collaboration: Excellent collaboration and communication skills to work cross-functionally with various teams. Impactful Role: Opportunity to lead product management initiatives for a key business segment. Career Growth: Be part of a growing team with significant impact on business and product strategy. Competitive Compensation: Attractive salary and benefits with opportunities for professional development. This position offers a great opportunity for someone with the right technical background and leadership experience to make a significant impact on our product portfolio and market strategy. Qualification : B.E Mechanical, Mining Engineering

Job Title: Senior Engineer Motor Design (Mechanical) Location: Coimbatore Function: E&E Motor Experience: 2 9 years Key Purpose Drive the development and mechanical design of induction motors and high-efficiency special electric machines, including PMSM (Permanent Magnet Synchronous Motor) and synchronous reluctance (Syn Rel) motors, ensuring robust performance, reliability, and compliance with industry standards. Educational Qualification & Experience Bachelor s or Master s degree in Mechanical Engineering 2 to 7 years of hands-on experience in the mechanical design of electric motors, specifically Induction motors, PMSM, or synchronous reluctance motors Strong familiarity with motor design principles and industry practices Key Responsibilities Lead mechanical design, prototyping, and validation of induction and special electric motors Manage engineering change processes related to motor design and ensure timely statutory approvals Understand Voice of Customer (VOC) inputs to formulate design strategies aligned with performance goals Perform structural, thermal, and rotor dynamic analyses to optimize mechanical and thermal motor performance in collaboration with the electrical engineering team Evaluate how mechanical stresses affect motor performance and balance design for optimal testing and durability Ensure designs meet applicable standards such as IEC, NEMA, including mounting, dimensions, noise, vibration, and ingress protection criteria Qualification : Bachelors or Masters degree in Mechanical Engineering

Job Title: Senior Lead / Principal Engineer Thermal Management Location: Coimbatore Function: Engineering Experience: 3 to 15 years Key Purpose Lead the development of compressor cooling systems, heat recovery systems, and thermal management solutions. Oversee the selection and design of heat exchangers, fans, and thermal valves. Drive innovation aimed at improving system performance, enhancing quality, and reducing costs. Manage resources and processes to achieve both short-term and long-term project objectives. Key Responsibilities Design and develop Heat Exchangers, Evaporators, Condensers, Fans, and Thermal Valves, including selection and optimization. Analyze thermal management system performance and provide actionable feedback to the Product Development Operations (PDO) team. Support thermal management for existing products and lead improvement initiatives as needed. Prepare and maintain comprehensive documentation of testing and results related to heat exchangers, evaporators, condensers, fans, and thermal valves in a systematic manner. Experience & Qualifications Bachelor s degree in Mechanical Engineering (BE/B.Tech); Master s degree in Thermal Engineering or Heat Transfer is a plus. 7 to 12 years of experience in the design and development of cooling system components. Proficient in creating 3D CAD models (preferably using SolidWorks) and detailed designs incorporating GD&T standards. Experienced in producing 2D drawing releases and managing Product Lifecycle Management (PLM) processes. Strong expertise in heat exchanger design. Knowledge of cooling fan selection and fan dynamics. Experience with coolant selection, testing, and heat recovery systems. Familiarity with supplier networks related to cooling system components. Awareness of statutory standards, certifications, and regulatory requirements. Qualification : Bachelors degree in Mechanical Engineering (BE/B.Tech); Masters degree in Thermal Engineering or Heat Transfer is a plus