Fmea Jobs in Bengaluru

Quality Manager Location: Bangalore Department: Operations About the Role IRP Systems, at the forefront of **high-performance e-powertrain systems**, is seeking an experienced **Quality Manager** to oversee all quality assurance and control activities in its automotive manufacturing environment. You will be instrumental in ensuring products meet **customer and regulatory standards** while continuously driving improvements in processes, reliability, and customer satisfaction. Key Responsibilities Quality Management System (QMS): Develop, implement, and maintain the QMS according to **IATF 16949**, **ISO 9001**, and customer-specific requirements. Quality Team Leadership: Lead and manage a team of quality engineers, inspectors, and technicians, ensuring adherence to quality standards and consistency. APQP & Core Tools: Manage **Advanced Product Quality Planning (APQP)**, **PPAP**, and **FMEA** activities to integrate quality into every stage of the product lifecycle. Quality Metrics Monitoring: Track and analyze key quality metrics (e.g., **scrap rate, PPM, customer complaints, warranty data**). Drive corrective actions for continuous improvement. Audits: Lead internal and external audits (**IATF, ISO, customer, and supplier audits**), ensuring full compliance with all quality standards. Customer Interface: Serve as the primary point of contact for customers regarding **quality issues** and performance reviews. Supplier Quality Management: Oversee **supplier qualification, audits, and corrective actions** to ensure quality consistency throughout the supply chain. Root Cause Analysis & CAPA: Facilitate **root cause analysis** and lead the implementation of **Corrective and Preventive Actions (CAPA)** to resolve issues and prevent recurrence. Continuous Improvement: Promote and lead a culture of continuous improvement using methodologies like **Lean, Six Sigma**, and problem-solving tools (**8D, 5 Whys, PDCA**). Compliance: Ensure compliance with all relevant safety, environmental, and regulatory standards applicable to the automotive industry. Skills and Qualifications Experience & Education Education: Bachelor s degree in Electronics Engineering or related fields. Experience: Minimum of **8 years in a Quality leadership role** within the automotive industry, and at least **10 years of experience in electronics and mechanical manufacturing**. Certifications & Standards Expertise Certifications: **Six Sigma Green/Black Belt certification is required.** Standards Expertise: Extensive knowledge of automotive quality standards (especially **IATF 16949**) and familiarity with **ISO 26262 (Functional Safety)**. Technical & Analytical Skills Quality Tools Proficiency: Expertise in using core quality tools such as **8D, APQP, FMEA, SPC, and MSA**. Manufacturing Knowledge: Familiarity with advanced manufacturing processes and technologies relevant to the automotive industry. Analytical Skills: Strong problem-solving and analytical skills to effectively address and resolve customer quality issues. Impactful Work: Contribute to the development of **high-performance e-powertrain systems**. Career Growth: Be part of a dynamic and rapidly growing company with opportunities for professional development. Competitive Benefits: Competitive compensation, flexible working options, and health coverage. Qualification : Bachelors degree in Electronics Engineering or related fields

Functional Safety Engineer Location: Bangalore Experience: 3 6 Years Education: B.E / B.Tech / M.E / M.Tech in Electronics, Electrical, Computer Science, or a related field Job Summary We are seeking a skilled and motivated Functional Safety Engineer to join our automotive embedded systems team. The ideal candidate will have hands-on experience with ISO 26262, strong embedded C programming knowledge, and a solid understanding of the software development lifecycle. This role is critical in ensuring that all safety-critical systems are developed in compliance with industry safety standards and regulations. Key Responsibilities Develop and maintain the Functional Safety Management System (FSMS) in line with ISO 26262 standards. Conduct hazard analysis and risk assessments (HARA) for automotive embedded systems. Define, allocate, and manage functional and technical safety requirements across hardware and software components. Support and guide development teams in achieving ASIL (Automotive Safety Integrity Level) compliance. Collaborate with hardware and software teams to ensure safety mechanisms are implemented and validated effectively. Prepare and maintain safety-related documentation, including Safety Plans, Safety Cases, and Safety Analyses (FMEA, FTA, DFA, etc.). Ensure traceability of safety requirements throughout the SDLC, using appropriate tools and processes. Participate in reviews, audits, and assessments to ensure continuous compliance with ISO 26262. Support safety validation and verification activities. Required Skills & Experience 3 6 years of experience in Functional Safety Engineering, with a minimum of 2+ years working specifically with ISO 26262. Proficient in Embedded C programming, with exposure to real-time embedded systems. Strong understanding of the Software Development Life Cycle (SDLC) in safety-critical environments. Good analytical and problem-solving skills. Effective communication and collaboration skills to work with cross-functional teams. Preferred / Added Advantage Experience in the automotive domain (e.g., ADAS, powertrain, or body control modules). Familiarity with automotive communication protocols (CAN, LIN, FlexRay). Exposure to toolchains like DOORS, Polarion, or Jama for requirement and safety management. Knowledge of complementary standards such as ISO 21434 (Cybersecurity) or IEC 61508. Work on innovative and safety-critical projects for global automotive clients. Opportunity to deepen your expertise in functional safety and ISO 26262. Collaborate with a high-caliber team in a technically driven environment. Competitive compensation, learning opportunities, and career advancement paths. Qualification : .E / B.Tech / M.E / M.Tech in Electronics, Electrical, Computer Science, or a related field

Job Title: Industrialization Engineer Location: Bengaluru, India Experience Required: 5 10 years Industry: Electronics / Electric Vehicles Employment Type: Full-time Company: Ultraviolette Automotive Pvt Ltd Join the Charge. Create the Future. At Ultraviolette, we are redefining mobility. From building India s fastest electric motorcycle to developing the world s most advanced electric scooter, we thrive on innovation, bold thinking, and performance that thrills. We're a diverse, passionate team of engineers, designers, and creators united by one mission: to build machines that are not only sustainable, but exhilarating. If you re driven by purpose and ready to shape the future of mobility, this is your moment. Role Overview: We are looking for a technically strong and hands-on Industrialization Engineer (Electronics) to lead the transition from R&D prototypes to scalable, high-quality mass production. In this cross-functional role, you will work at the intersection of design, manufacturing, sourcing, and embedded systems, ensuring our products are built for scale, reliability, and performance without compromising innovation. Key Responsibilities: Technical Ownership & Industrialization: Lead industrialization from EVT (Engineering Validation Test) to DVT (Design Validation Test) and PVT (Production Validation Test), up to mass production. Translate R&D designs into production-ready documentation (BOMs, Gerbers, PCBA specs, test jigs, etc.). Conduct Design for Manufacturability (DFM) and Design for Testability (DFT) reviews. Own ramp-up metrics such as yield, test coverage, defect trends, and field return analysis. Collaborate with R&D teams on thermal design, layout optimization, and component derating strategies. Ensure compliance with voltage isolation, creepage/clearance, and relevant safety standards. Supplier & EMS Collaboration: Act as a technical bridge between internal teams and EMS vendors, ensuring alignment from design to execution. Coordinate with EMS on NPI builds, process validation, line setup, and FAI (First Article Inspection). Support firmware flashing, version control, and hardware-software integration testing at production lines. Assist in troubleshooting mechanical, electrical, or firmware-related issues during production. Component Engineering & Cost Optimization: Evaluate and qualify alternate components and suppliers. Drive cost engineering and BOM optimization without compromising on quality. Engage in component lifecycle management and ensure availability through the production lifecycle. Required Qualifications & Skills: B.E./B.Tech in Electronics, Electrical, or related field 5 10 years experience in hardware industrialization, preferably in EV or electronics manufacturing Strong knowledge of PCB design reviews, SMT/PCBA processes, and box build Hands-on with tools like Altium, OrCAD, or similar for PCB-level evaluations Experience with ICT/FCT test setups, test fixture design, and test station validation Basic embedded systems understanding firmware flashing, serial log analysis, GPIO testing Experience working directly with EMS vendors, test labs, and component suppliers Excellent cross-functional communication skills Willing to travel to EMS or supplier sites for builds and validation Nice to Have (Preferred): Familiarity with FMEA, APQP, PPAP, ISO/IATF 16949 processes Knowledge of compliance and safety standards (e.g., IEC, ISO 26262) Background in value engineering, cost-down programs, and process audits Work on industry-defining EV products with world-class engineering challenges Collaborate with cutting-edge R&D and manufacturing teams Be part of a mission-led company that s changing the landscape of mobility A workplace culture that values ownership, audacity, and excellence Apply now and be a part of something bigger. Let s create the future together. Qualification : B.E./B.Tech in Electronics, Electrical, or related field

Job Description: Experienced in at least one of the industry wide 3D CAD Design packages with wire harness design routing add-ons (Unigraphics NX, CATIA, etc.) Proficiency in NX Electrical Workbenches, Part and Assembly Design. Experience within the automotive industry. Work experience in PDM/PLM tool Good Communication skills German language proficiency would be an added advantage. Good understanding of automotive electrical packaging concept and Electrical/mechanical interfaces. Educational Qualification: B.E / B.Tech (Automobile/Mechanical/Electrical Engineering) Number of Positions: 10 Skills: UGNX / Catia

Senior Memory Design Engineer Company Arm Location Noida, India Job Description This opening is for a Senior Memory Design Engineer in our PHYSICAL IP MEMORY group in Noida. We work on innovative memory architectures in leading-edge technology nodes to enable the best Arm Systems across all markets. As a memory design professional, this position is a rare opportunity to work with our successful circuits, characterization, and layout team, and gain a deep understanding of memory usage in SoCs based on Arm cores. You will discover a wide variety of circuit innovations while working on different types of memories in cutting-edge process technologies. Responsibilities In this role, you will be working in the following areas: Work on memory architecture development in the latest technologies. Transistor-level full-custom design and collaboration with the physical design team for layout realization. Develop new design features and perform circuit/layout optimizations to meet Performance, Power, and Area targets. Lead memory design verification and characterization activities. Ensure high-performance memory designs with the lowest possible power, as needed for Arm CPUs, GPUs, and SOCs. Required Skills and Experience 5-8 years of proven experience in memory design. Strong interest and command of basic electronics (Diodes, RC Circuits, CMOS, etc.). Solid understanding of digital electronics fundamentals (Flip-Flops, Latches, Decoders, Multiplexers). Understanding of setup and hold time concepts. In-depth knowledge of memory fundamentals, especially single-port SRAM: Circuit design (Bitcell, WL decoder, Sense Amp, Self-time, Assist, Low power features, DFT features). Good understanding of technology trade-offs in deep sub-micron technologies. Self-motivated, hardworking, and positive outlook. Strong organizational skills with attention to detail. Nice-to-Have Skills and Experience Understanding of advanced process technology nodes and memory product layout implementation. Experience with shell scripting, machine learning (ML), and automation. Knowledge of statistical simulations (e.g., Monte Carlo). What Arm Offers Arm is committed to global talent acquisition and offers an attractive relocation package. With offices worldwide, Arm is a diverse organization of dedicated, creative, and hardworking engineers. By fostering a dynamic, inclusive, and meritocratic workplace where everyone can grow and succeed, we encourage our people to make exceptional contributions to Arm's success in the global marketplace. Accommodations at Arm If you need support or an accommodation to Be Your Brilliant Self during the recruitment process, please email [email protected]. By sending the requested information, you consent to its use by Arm to arrange appropriate accommodations. All accommodation requests will be treated with confidentiality, and information will only be disclosed as necessary to provide the accommodation. Examples of support include breaks between interviews, having documents read aloud, or office accessibility. Hybrid Working at Arm Arm s hybrid working approach is designed to create an environment that supports both high performance and personal wellbeing. We believe in bringing people together face-to-face to enable faster work while recognizing the value of flexibility. Hybrid working patterns depend on team and role requirements, which will be discussed upon application. Some flexibility might be limited by legal, regulatory, tax, or other considerations. Equal Opportunities at Arm Arm is an equal opportunity employer, committed to fostering an environment of mutual respect where equal opportunities are available to all applicants and colleagues. We are a diverse organization of dedicated and innovative individuals and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Title: Mechanical Design Engineer Location: Bengaluru Experience Required: 2 to 4 years Minimum Qualification: Bachelor of Engineering (BE) Key Skills Mechanical Product Design 3D Modeling (NX or SolidWorks) Engineering Drawing & Documentation Prototyping & Testing FEA & Tolerance Stack-Up Analysis DFMEA & Risk Assessment Cross-functional Collaboration Supplier & Manufacturing Support Job Summary We are looking for a talented and detail-oriented Mechanical Design Engineer to support the development of innovative mechanical products from concept through to production. The ideal candidate will have 2 4 years of hands-on experience in mechanical design, a strong grasp of engineering principles, and a passion for problem-solving and continuous improvement. Key Responsibilities Support mechanical design efforts for new product development from concept to launch. Create detailed 3D models, engineering drawings, and Bills of Materials (BOMs) using NX or SolidWorks. Build and test prototypes to validate design concepts and performance. Collaborate closely with electrical, software, industrial design, and manufacturing teams. Evaluate material choices, manufacturing processes, and cost implications during the design phase. Perform tolerance stack-up analyses, finite element analysis (FEA), and other engineering calculations. Participate in and support design reviews, DFMEA sessions, and risk assessments. Liaise with suppliers and contract manufacturers to ensure design integrity through production. Maintain accurate documentation in line with engineering change control and regulatory requirements. Contribute to continuous improvement initiatives and intellectual property (IP) development. Qualification : Bachelor of Engineering (BE)

Senior Lead Engineer Structural Analysis (Hybrid) Location: Bangalore, Karnataka, India Job Type: Full-time Company: Collins Aerospace (Raytheon Technologies) Experience: 5 8 years Job Overview We re looking for a Senior Lead Engineer (Stress) to join our Advanced Structures business unit. This role leads structural analysis for New Product Introduction, redesign, and technology programs. Support includes a wide range of aerospace components including ETRAS systems. Responsibilities Lead stress analysis using FEA tools (Ansys) and classical hand calculations. Prepare structural analysis documentation, stress reports, and certification data. Collaborate with design, manufacturing, and quality teams. Investigate failures and provide technical resolutions. Contribute to process improvements, automation, and tool development. Ensure on-time and quality delivery of engineering work products. Basic Qualifications Bachelor s/Master s in Mechanical or Aerospace Engineering. 5 8 years of structural analysis experience using Ansys Workbench. Strong background in fatigue, stress, and vibration analysis. Skilled in classical calculations and report writing. Preferred Qualifications Experience in hydraulic/electro-mechanical component analysis. Proficiency with Mathcad, Python, or Excel VBA. Familiarity with aerospace material properties and treatment processes. Benefits Transportation & meal vouchers Group life, health, and personal accident insurance 18 days vacation + 12 days contingency leave National Pension Scheme and car lease options Employee scholar program Equal Opportunity Collins Aerospace is an equal opportunity employer and values diversity. All qualified applicants will receive consideration without regard to race, gender, disability, or veteran status. Apply Now Be part of our aerospace revolution. Apply today and help us redefine flight for the future.

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Experience in micro architecture and requirements/implementation for automotive designs (focused on functional safety) and their Safety Analysis work products like concept FMEDA, DFA, DFMEA, FTA, FMEDA, etc. including FuSa compliant IP development and third-party IP compliance/deliverables/DIA. Responsibilities shall include the following: Developing a system level safety concepts and requirements for ADAS and IVI use cases with customer implementations in mind and to integrate Qualcomm s hardware in leading Automotive OEM and Tier 1 safety critical systems. Work in collaboration with 3rd party, Customer, and Automotive Stack suppliers, Hardware component suppliers (PMIC, DRAM, Sensor, etc) to ensure all aligned customer system level requirements are met Work with IP and SoC teams on the implementation of Technical Safety Concepts (TSCs) on Qualcomm s Snapdragon automotive hardware. Work with various technology teams on architectural features that would enable targeted safety levels (ASIL B to ASIL D, depending upon the technology team and system level requirements) to meet customer targets Conducting safety analyses, both quantitative and qualitative, fault campaigns on automotive hardware designs and identify areas of improvement. Responsibilities will include leading functional safety related activities for SoC development and ensure ISO 26262 compliance with respect to SoC architecture, development processes and work products. Work closely with SoC Design and IP teams, Software team, Quality teams, the functional safety manager(s) as well as customers to ensure the functional safety process is executed and documented. Working with vendors and partners to ensure functional safety requirements are fulfilled by the components that they provide Work with internal and external functional safety assessors to ensure compliance with ISO 26262 Create functional safety collateral for customers viz. Functional Safety Manual, Safety Analyses Reports, dedicated application notes etc. Supporting customer assessments of our safety features and recommending HW and SW based solutions that meet overall system targets. Working closely with customers and supporting them on various functional safety related aspects Minimum Qualifications Bachelor s degree in engineering, Information Systems, Computer Science, or related field. 8+ years Systems Engineering, SoC Integration, Verification, or related work experience. Collaborative work experience with good communication skills involving customers, vendors, and internal development teams. Structured problem-solving capability and ability to work with teams on root cause analyses. Preferred Qualifications 5+ years Automotive experience and familiarity with Safety work products, experience with Functional Safety Hardware and/or Software development in semiconductor industry meeting IS0 26262/ IEC 61508 standards. Prior automotive experience in ADAS and self-driving systems preferred. System level Functional safety analysis experience on Hardware/Software components integration preferred SoC/IP integration or verification with good understanding of SoC Architecture and IP design experience preferred Requirements Management Tools and establishing traceability for functional safety requirements e.g. DOORS, etc. Familiarity with Failure Modes and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) is required experience using tools to perform FMEA, FTA preferred Familiarity with hardware failure rate calculation (FMEDA) experience using Siemens 29500 and/or IEC 62380 preferred Relevant Safety Certification is desired e.g. CFSE, CFSP Qualification : Bachelors degree in engineering, Information Systems, Computer Science, or related field.

When visionary companies need to know how their world-changing ideas will perform, they close the gap between design and reality with Ansys simulation. For more than 50 years, Ansys software has enabled innovators across industries to push boundaries by using the predictive power of simulation. From sustainable transportation to advanced semiconductors, from satellite systems to life-saving medical devices, the next great leaps in human advancement will be powered by Ansys. Innovate With Ansys, Power Your Career. Summary / Role Purpose The Senior Application Engineer is responsible for leveraging their experience, subject matter expertise, and customer-relationship skills to assist in growing our software business by proactively helping customers deploy ANSYS technology to deliver on their key business initiatives. This role is focused on the Automotive Industry for applications like crashworthiness, occupant, and pedestrian safety. Key Duties and Responsibilities Collaborate with Sales to create solutions to complex customer problems using LS-DYNA and other Ansys structural simulation software. Support Automotive customers in developing methods for crash and safety-related simulation. Present ANSYS value proposition to executive-level audiences. Lead high-profile business development projects and analysis of complex technical problems. Provide best practices to help customers derive more value from ANSYS solutions. Participate in internal corporate initiatives for product enhancement, consulting, and training. Minimum Education / Certification Requirements and Experience BS in engineering or a related technical discipline. Minimum 5 years of experience in automotive crash-related simulation. Knowledge of LS-DYNA and other Ansys tools. Understanding of Euro-NCAP, G-NCAP, and Bharat N-CAP simulation implementations. Experience in durability, full vehicle crash simulation, dummy positioning, airbag modeling. Strong fundamentals in Structural Mechanics, FEA, Non-Linear Materials, and Dynamics. Strong project management skills, ability to work with cross-functional teams. Preferred Qualifications and Skills MS or PhD in Engineering is preferred. Customer service mindset with a passion for excellence. Ability to travel up to 25%. At Ansys, We Operate as ONE Ansys We fuel new ideas, build relationships, and help each other realize our greatest potential. Our Commitments: Amaze with innovative products and solutions. Make our customers incredibly successful. Act with integrity. Ensure employees thrive and shareholders prosper. Our Values: Adaptability: Be open, welcome what s next. Courage: Move forward passionately. Generosity: Share, listen, serve. Authenticity: Be you, make us stronger. Our Actions: We commit to audacious goals. We work seamlessly as a team. We demonstrate mastery. We deliver outstanding results. Inclusion is at Our Core We believe diverse thinking leads to better outcomes. We are committed to creating a workplace where diversity, inclusion, equity, and belonging thrive. Welcome What s Next in Your Career at Ansys At Ansys, you will work alongside visionary leaders to change the world with innovative technology. We push the limits of world-class simulation technology, empowering our customers to turn their design concepts into successful, innovative products faster and at a lower cost. At Ansys, it s about learning, discovery, and collaboration. It s about the "what s next" as much as the "mission accomplished." It s about forging innovation in an environment built on respect, autonomy, and ethics.

Position Responsibilities: 1. Risk and Threat Assessments: Conduct comprehensive risk and threat assessments for L3 Autonomous Driving (AD) systems. Perform analyses like TARA (Threat Analysis and Risk Assessment) and MORA (Misuse-Oriented Risk Analysis). 2. Security Design and Development: Redesign modules focusing on cybersecurity. Develop and implement security features, including SecOC (Secure Onboard Communication) and CSM (Cybersecurity Management). Drive compliance with cybersecurity regulations and standards. 3. System and Requirements Architecture: Analyze and define security requirements for AD L3 systems. Collaborate with E/E system architects for security improvements. Develop and refine business, system, and architecture requirements. 4. Support and Coordination: Assist with the development of ECU software for L3 autonomous driving. Provide integration support and troubleshooting for ECUs. Coordinate internal and external assessments, including penetration tests and security evaluations. 5. Cybersecurity Analysis and Implementation: Develop security concepts and conduct analyses like FTA (Fault Tree Analysis) and FMEA (Failure Modes and Effects Analysis). Ensure adherence to regulations such as ISO 21434, UNECE R155, and UNECE R156. Required Skills and Competencies: Essential Skills: Strong expertise in automotive cybersecurity and relevant regulations (ISO 21434, UNECE R155/R156). Knowledge of L3 Autonomous Driving (AD) and Advanced Driver Assistance Systems (ADAS). Hands-on experience with Automotive ECUs, secure bootloaders, and gateway modules. Proficiency in C/C++ programming and working knowledge of AUTOSAR and its configuration tools. Familiarity with cybersecurity analysis tools like Medini or equivalent. Expertise in in-vehicle networks (e.g., CAN Protocol, UDS Protocol) and V2X technologies. Understanding of cybersecurity best practices, secure development requirements, and IT security standards. Experience with threat management models, firewalls, and embedded software components. Knowledge of security mechanisms, protocols, cryptography, and authentication systems. Preferred Skills: Strong background in ADAS and autonomous driving technologies. Experience in intrusion detection, incident response, and computer forensics. Familiarity with requirements management tools (e.g., DOORS, codeBeamer, JAMA). Hands-on experience in product development lifecycle and automotive cybersecurity. Educational Qualifications and Experience: Essential: Bachelor s or Master s degree in Information Security, Computer Science, Electrical Engineering, or related fields. Minimum of 4+ years of relevant experience in the automotive industry (AD/ADAS or autonomous driving). Preferred: Expertise in cybersecurity standards, analysis, and threat management tools. Key Competencies and Tools: Cybersecurity Standards: ISO 21434, UNECE R155/R156. Risk Assessment Techniques: TARA, MORA. Analysis Tools: Medini, FTA, FMEA. Software Tools: AUTOSAR, SAP, C/C++ programming, Requirements Management Tools (DOORS, JAMA). Protocols and Technologies: CAN, UDS, V2X. Qualification : Bachelors or Masters degree in Information Security, Computer Science, Electrical Engineering, or related fields.

Job Title: Design Engineer Location: Bengaluru, Karnataka No. of Positions: 1 2 Industry: Home Automation & AV, Building Automation Joining: Immediate About EBSL Automat Pvt. Ltd. EBSL Automat is a leading provider of innovative home automation solutions, dedicated to enhancing everyday living through intelligent technologies. With a strong presence in the smart living and building automation industry, we offer an exciting and collaborative environment for engineering professionals to grow, innovate, and contribute to transformative projects. Position Overview We are looking for a Design Engineer with a passion for CAD modeling, automation, and system development. This role involves collaborating with engineering, drafting, and operations teams to develop accurate, efficient, and high-quality design solutions. If you're technically inclined, detail-oriented, and eager to contribute to cutting-edge smart automation systems, this opportunity is for you. Key Responsibilities Assist in the development and implementation of CAD modeling and drafting standards for consistent documentation and design. Collaborate with cross-functional teams to incorporate Design for Manufacturability (DFM) and Design for Assembly (DFA) into models and technical drawings. Continuously improve design automation processes to boost efficiency and accuracy. Support engineering operations with tools like spreadsheets, parts lists, BOM (Bill of Materials) generation, and calculation templates. Develop internal system procedures to maintain high-quality standards aligned with industry best practices. Document technical procedures, user manuals, and training materials. Provide technical training and support to team members when needed. Contribute to other engineering or development projects as assigned. Skills & Experience Must-Have: Bachelor's degree in Electrical Engineering or a related field. 1 4 years of relevant experience in industrial or design automation. Good verbal and written communication skills. Team player with the ability to work under tight deadlines. Strong attention to detail, creative problem-solving skills, and analytical thinking. Proficiency in CAD software and understanding of design principles. Experience with engineering tools, ERP systems, and MS Office Suite (Excel, Word, Outlook). Preferred/Good-to-Have: Experience in CAD automation or engineering application development (2+ years preferred). Ability to work as a full-stack developer (desktop, web, client platforms) is a plus. Passion for programming and self-driven learning. Ability to work in flexible shifts as required. Familiarity with home automation or building systems is advantageous. Who Can Apply Candidates with 1 4 years of relevant experience. Freshers with strong academic backgrounds and a passion for design & automation are also encouraged to apply. If you're looking to contribute to the future of intelligent living while advancing your engineering career, we invite you to be part of the EBSL Automat journey. Qualification : Bachelor's degree in Electrical Engineering or a related field

Position: Mechanical Design Engineer Location: Bengaluru Industry: Automation / Special Purpose Machinery (SPM) / Semiconductor (preferred) Qualifications: Bachelor s degree in Mechanical Engineering (BE) 3 to 5 years of relevant experience, preferably in machinery or automation sectors Technical Skills: Proficiency in 3D CAD software (mandatory), such as SolidWorks, Autodesk Inventor, or NX Strong expertise in selection and integration of OEM components: motors, couplings, bearings, linear motion guides, O-rings Knowledge of weldment processes, machining for structural design, and sheet metal fabrication for enclosures Ability to create detailed 3D models and GD&T drawings for manufacturing Experience in design calculations like LM guide movement, coupling torque, and O-ring sizing (a plus) Familiarity with semiconductor industry design activities is advantageous Working knowledge of pneumatic, vacuum, and cooling systems is beneficial Soft Skills: Excellent communication skills Willingness to work flexible hours to accommodate US time zone meetings Responsibilities: Develop and generate 3D models and detailed manufacturing drawings adhering to design standards Perform design calculations and validate engineering designs to ensure accuracy and feasibility Collaborate closely with cross-functional teams to select and integrate OEM components appropriately Participate in structural and sheet metal enclosure design and development Keep up-to-date with the latest trends and technologies, especially in semiconductor and automation domains Provide technical support on pneumatic, vacuum, and cooling systems as needed Perform additional related duties as assigned to support project and team objectives Qualification : Bachelors degree in mechanical engineering (BE)

Job Title: Mechanical System Engineer - Robotics Location: Bengaluru Role and Responsibilities System Design & Integration: Analyze customer production lines to break down requirements and design mechanical systems integrating the CyRo platform. Ensure mechanical designs meet customer-specific constraints such as space, payload, and environmental conditions. Develop systems including CyRo, feeding mechanisms, sensors, fixtures, and other mechanical components for tailored automation solutions. Perform tolerance analysis to validate dimensional and functional requirements. Collaborate closely with electrical, software, and systems engineering teams to ensure seamless subsystem integration. Design mounting systems, fixtures, and interface components to facilitate integration into customer facilities when required. Mechanical Optimization: Optimize system designs by integrating mechanisms and sensors to enhance performance, modularity, and scalability. Select and design mechanisms for part presentation, feeding, reorientation, and manipulation considering space and performance constraints. Develop automation cells with modularity and scalability for current and future applications. Continuously refine workflows to improve cycle times, reduce errors, and increase operational efficiency. Modelling: Create and integrate detailed mechanical designs, including CAD layouts and fixtures, supporting customer automation solutions. Validate designs through tolerance analysis and develop calibration fixtures for robotic systems. Work cross-functionally to ensure mechanical designs integrate effectively with instrumentation, software, and controls. Documentation: Produce comprehensive documentation such as design specifications, validation reports, and scalability guidelines to ensure reproducibility. Develop detailed installation guides, maintenance manuals, and troubleshooting documentation for customer use. Skills and Experience Proficient in CAD software such as SolidWorks, CATIA, or AutoCAD. Strong grasp of mechanical engineering principles, materials science, and manufacturing processes. Experience in robotics, automation, or mechatronics is highly preferred. Familiarity with relevant industry standards and safety regulations (ISO, ANSI, OSHA). Excellent analytical, problem-solving, communication, and teamwork skills. Understanding of manufacturing processes, assembly lines, and automation cell design. Prior experience designing and integrating automation systems in production or process lines. Required Qualifications Bachelor s or Master s degree in Mechanical Engineering, Mechatronics, or related fields. Minimum 3 years of experience in mechanical design and automation systems integration. Strong knowledge of manufacturing processes and mechanical systems integration. Skilled in CAD and simulation tools. Additional Preferred Qualifications Experience with robotic automation systems and integration into manufacturing workflows. Familiarity with designing feeding mechanisms, part presentation systems, and end-of-arm tooling (EOAT) for robotics. Exposure to Autonomous Mobile Robots (AMRs) and other robotic mobility solutions. Understanding of sensors and actuators commonly used in automation (vision systems, force-torque sensors, linear actuators). Experience with plant simulation tools such as Siemens Plant Simulation or FlexSim. Qualification : Bachelors or Masters degree in Mechanical Engineering, Mechatronics, or related fields.

Job Description: Bachelor s degree in Mathematics, Engineering, preferably in Mechanical or a related field. Strong programming skills in any programming languages such as Python or Java or C++. Solid understanding of analytical geometry and computational geometry. Basic knowledge of CAE tools ANSA is a must. Strong analytical and problem-solving skills. Background in programming, analytical geometry, and exposure to pre-processors, particularly ANSA, is an advantage. You will receive comprehensive on-job training on python, ANSA, a leading CAE pre-processor, and ANSA scripting Sessions and exposure to commonly used ANSA API s. Preferred Skills Ability to write programs to solve mathematical or logical problems. with ANSA knowledge. Experience: 0 to 3 years Location: Bangalore Educational Qualification: BE / ME /B.Tech / M.Tech Number of Positions: 3 Qualification : BE / ME /B.Tech / M.Tech

Overview: Collins Aerospace is seeking a talented and driven Lead Engineer (Stress) to support the Actuation Systems business unit. In this role, you will be involved in structural analysis for New Product Introduction (NPI), redesign, and technology programs, focusing on various product lines, including Power Door Opening Systems (PDOS), Thrust Reverser Actuation Systems (TRAS), and Highlift Flap and Slat Actuation Systems. You will work with cross-functional teams to ensure the structural integrity and performance of our aerospace products. Primary Responsibilities: Analysis & Design Compliance: Understand system requirements, design intent, and comply with structural analysis practices, aerospace standards, customer specifications, and regulatory requirements. Preliminary & Detailed Analysis: Conduct preliminary and detailed structural analysis for NPI, redesigns, value engineering, and technology programs. Stress Calculations & Report Preparation: Perform classical hand calculations and Finite Element Analysis (FEA). Prepare detailed stress reports and presentations. Failure Investigations: Support manufacturing concessions and failure investigations, ensuring product integrity. Cross-functional Collaboration: Actively participate in team discussions, working with customers, suppliers, and internal stakeholders to drive product development. Timely Execution: Ensure all analysis tasks are completed on schedule with the highest quality standards. Basic Qualifications: Education: Bachelor s or Master s degree in Mechanical Engineering or a related field. Experience: 3 to 6 years of experience in structural analysis, using both classical hand calculations and Finite Element tools (such as Ansys Workbench, Nastran). Technical Expertise: Solid knowledge of mechanical engineering fundamentals, stress, fatigue, vibration analysis, and engineering materials. Preferred Qualifications: Design Experience: Experience in hydraulic and electro-mechanical product design. Material Knowledge: Understanding of engineering materials (including composites), manufacturing processes, and surface/heat treatment processes. Software Proficiency: Hands-on experience with Ansys Workbench and Mathcad is required; experience with Nastran and Ansys ICEPAK is a plus. Productivity Tools: Experience with Excel VBA, Python, or similar tools for enhancing productivity. Aerospace Compliance: Familiarity with aerospace product qualification, compliance, and certification processes. About Collins Aerospace: Collins Aerospace, a Raytheon Technologies company, is a leader in providing advanced and intelligent solutions for the global aerospace and defense industry. We are dedicated to developing high-quality products that contribute to safer, more sustainable air travel. Our Actuation Systems business unit designs and manufactures products that enhance the flight experience by ensuring passenger safety. We strive for continuous improvement and innovation in our designs, making air travel safer, more affordable, and environmentally friendly. Diversity & Inclusion: Collins Aerospace believes that diversity drives innovation, and inclusion fosters success. We are committed to creating a culture where all employees can contribute their ideas and passions, helping us tackle the most complex challenges and achieve limitless possibilities. Employee Benefits: Group Term Life Insurance Group Health Insurance Group Personal Accident Insurance 18 days of earned leave & 12 days of casual/sick leave annually Employee Scholar Program Car Lease Program National Pension Scheme Leave Travel Allowance Ethical & Safety Commitment: All positions at Collins Aerospace require a background check as part of our strong commitment to ethical conduct and safety. Why Collins Aerospace? At Collins Aerospace, we are redefining the future of aerospace. Our team of engineers and innovators is driven by a passion for excellence, and we welcome bright, creative minds to join us on this journey. We offer a supportive work culture where employees can thrive and grow, pushing the boundaries of what s possible in aerospace. If you re an enthusiastic engineer with a passion for structural analysis and aerospace innovation, we d love to hear from you! Qualification : Bachelors or masters degree in Mechanical Engineering or equivalent

Job Description: Experience in Low & High voltage w/h Creation of 3D CAD models for Electrical Routing, Schematic, Sheet metal or plastic components, PDM & PLM exposure. Experience with Automotive product development. Good in NX wiring harness, Electrical Routing & Sheetmetal & Part modeling module. Educational Qualification: BE / ME / B.Tech /M.Tech Number of Positions: 2 Qualification : BE / ME / B.Tech /M.Tech

Job Description Intel is looking for an experienced Customer Quality Engineer to play a key technical support role for Xeon platforms, acting as a primary contact for pre- and post-sales support. In this role, you will represent Intel in customer engagements, ensuring that customer needs are accurately communicated within Intel and that technical challenges are resolved efficiently. You will collaborate closely with Sales and Marketing (SMG) and internal engineering teams to drive strategic technical support and enablement. Key Responsibilities: Xeon systems technology enabling, supporting customers in hardware design and validation. Provide hardware design support, including schematic reviews, layout analysis, SI (Signal Integrity), PI (Power Integrity), mechanical, and thermal analysis. Debug and resolve hardware issues, working closely with internal and external partners. Develop and publish technical documentation, collaterals, and training materials for DCAI (Data Center and AI) platforms. Manage Field Action Customer Returns (FACR) and returns management. Support customer production challenges by offering technical expertise and resolution strategies. Enable early worldwide customer issue support, facilitating platform debug and silicon failure analysis. Provide post-sales technical support for installation, implementation, and maintenance of DCAI reference platforms. Ensure Intel solutions are fully functional and meeting customer specifications, with follow-up technical support as needed. Qualifications & Experience: Educational Requirements: B.E in Electronics & Communication Engineering or a related field. Minimum of 15 years of industry experience in relevant areas. Technical Expertise: Experience in Xeon platforms hardware design and validation. Strong knowledge of schematics, layout, mechanical, and thermal analysis. Experience in electrical validation and signal integrity (SI) analysis (desirable). Expertise in hardware issue validation and debug. Proven ability to develop technical documents and presentations for customer training and support. About Intel Validation Engineering (iVE) Group: The Intel Validation Engineering (iVE) Group plays a crucial role in Intel s product leadership, ensuring that the latest cutting-edge designs and technologies meet the highest quality standards. iVE is responsible for validating, debugging, and optimizing Intel s products, ensuring the timely delivery of Intel s annual technology roadmap. Intel s Commitment to Diversity & Inclusion: Intel is committed to providing equal employment opportunities to all qualified applicants regardless of race, gender, religion, nationality, disability, or any other protected characteristic under local laws. Intel offers a best-in-class compensation and benefits package, including: Competitive salary, stock options, and performance-based bonuses. Comprehensive healthcare, retirement plans, and paid time off. Opportunities for career growth, leadership, and professional development. Qualification : B.E in Electronics & Communication Engineering or a related field.

About Ansys For over 50 years, Ansys has been at the forefront of innovation, enabling companies across industries to push boundaries through the predictive power of simulation. From sustainable transportation to life-saving medical devices, our solutions help bridge the gap between design and reality. At Ansys, we empower our employees to turn visionary ideas into reality. Join us and shape the future of simulation technology! Role Overview As a Senior R&D Engineer, you will join the SeaScape Research and Development team, working on cutting-edge semiconductor analysis software. You will contribute to the development of ANSYS RedHawk-SC, the industry s first EDA solution built on the SeaScape Elastic Compute Architecture, designed to handle massive datasets and distributed computing. This role requires strong C++ programming skills, problem-solving abilities, and a solid foundation in semiconductor design. Key Responsibilities Software Development & Optimization Design, develop, and optimize high-performance software for semiconductor analysis. Write efficient, scalable, maintainable, and robust code in C++. Implement unit, regression, and system-level tests to ensure high-quality code. Diagnose and fix complex software issues. Collaboration & Process Adherence Work closely with technical leads, engineers, and managers to refine and improve solutions. Learn and follow best practices in software engineering and semiconductor design. Communicate effectively within the team to ensure smooth collaboration. EDA & Semiconductor Analysis Develop expertise in IC Layout specification formats (Oasis, GDS). Work on parasitic extraction, gate/transistor-level design, and power analysis. Optimize EDA software for large-scale simulations and distributed computing. Required Qualifications & Skills Education & Experience: Bachelor s or Master s degree in Computer Science, Electrical/Electronics Engineering, or a related field. 4-6 years of experience in a product-based company. Technical Expertise: Proficiency in C++ for high-performance computing. Strong knowledge of data structures, algorithms, and debugging. Experience working with Linux operating systems. Basic understanding of IC layout specifications (Oasis, GDS). Familiarity with gate-level and transistor-level electronic design. Soft Skills: Ability to learn quickly and work in a fast-paced environment. Strong problem-solving skills and attention to detail. Excellent communication and teamwork skills. Preferred Qualifications (Nice to Have) EDA & Semiconductor Analysis: Experience with parasitic extraction for advanced semiconductor nodes. Knowledge of transistor-level simulation and gate-level power analysis. Familiarity with IC physical design and RTL optimization. High-Performance Computing & Distributed Processing: Experience with distributed processing, debugging, and optimization. Knowledge of AI/ML, GPU architectures, CUDA, and vectorization libraries (Google Highway). Experience with high-bandwidth networking (InfiniBand). Software Development & Automation: Experience in commercial software development, build automation, and testing. Work on Industry-Leading Technology Build next-gen EDA and semiconductor simulation software. Career Growth Be part of an innovative, research-driven environment. Collaborate & Innovate Work alongside industry experts in high-performance computing & semiconductor analysis. Inclusive & Diverse Culture We believe diverse thinking leads to better outcomes. At Ansys, we commit to excellence, integrity, and innovation Together, we power the future of simulation. Apply Now & Be a Part of Ansys' Innovation Journey!

About Ansys For over 50 years, Ansys has been at the forefront of engineering simulation, empowering innovators across industries. From cutting-edge optics and photonics to sustainable energy solutions, our technology helps close the gap between design and reality. At Ansys, we cultivate a culture of excellence, collaboration, and growth. Join our Customer Excellence team and play a pivotal role in helping customers succeed with Ansys Zemax OpticStudio and other optical simulation tools. Role Overview As an Optics Technical Support Engineer, you will assist customers in integrating Ansys software into their workflows, resolving technical challenges, and improving their engineering simulations. You will apply your expertise in optics and optical system modeling to support customers worldwide, ensuring they achieve optimal results with Ansys Zemax OpticStudio. This is a customer-facing role that requires strong problem-solving, communication, and technical expertise in optical simulation. Key Responsibilities Customer Support & Technical Expertise Provide technical support for Ansys Zemax OpticStudio and other optics simulation tools. Troubleshoot complex optical modeling challenges and recommend solutions. Deliver high-quality, timely customer service to ensure customer satisfaction. Product & Process Improvement Identify and submit product improvement suggestions and file defect reports as needed. Participate in field testing of new software releases to validate features and workflows. Knowledge Sharing & Training Develop best practices documentation and technical content. Support sales and marketing efforts by conducting demonstrations, webinars, and training sessions. Cross-Team Collaboration & Strategic Initiatives Work closely with internal teams, including R&D, Sales, and Product Management. Engage in strategic projects to improve Ansys optics solutions. Required Qualifications & Skills Education & Experience: Master s degree in Physics, Optics, Optical Engineering, or a related field. 3+ years of experience in an engineering software environment (or PhD with no prior experience). Technical Expertise: Hands-on experience in optical system modeling and simulation. Proficiency in commercial optical design software (e.g., Ansys Zemax OpticStudio, Synopsys CodeV). Strong knowledge of optical theory and simulation techniques. Soft Skills: Excellent problem-solving and analytical abilities. Strong communication skills in English (written & spoken). Ability to work independently and manage tasks efficiently in a distributed team environment. Customer Engagement: Experience in technical support, consulting, or customer-facing roles. Ability to translate complex technical concepts into clear and accurate solutions. Preferred Qualifications (Nice to Have) Programming & Automation: Familiarity with Python and/or MATLAB for optical simulations. Ansys Software Experience: At least 2 years of hands-on experience using Ansys Zemax OpticStudio. Customer-Facing Experience: Prior experience in customer support, technical consulting, or training. Travel Flexibility: Willingness to travel up to 10% of the time. Innovate & Impact Work on cutting-edge optics simulation technology. Career Growth Enhance your expertise in optical engineering & simulation. Collaborate & Lead Engage with industry experts & global customers. Inclusive Culture Be part of a company that values diversity & innovation. At Ansys, we are committed to helping customers succeed while pushing the boundaries of simulation technology! Apply Now & Be a Part of Ansys' Optical Simulation Excellence!

Job/Position Summary Responsibilities Lead and Perform system level testing of Chassis system Brakes, Steer, Suspension in a Hardware In Loop Testing environment Understanding of Chassis features and components involved Mentor and guide team for designing, developing and validation of software applications Collaboration with internal teams and customers within a production program Contribute best practices for System testing and validation Contribute in customer interaction, demonstration and proposal preparation Mandatory Skills: System knowledge of Vehicle Dynamics or Brakes or Suspension system or Steer system Expertise in defining the test strategy for system testing for chassis ECU Expertise in performing Hardware-In-Loop commissioning, testing and analysis Experience in requirement-based testing, diagnostic and fault insertion testing Experience in Test Automation using CAPL/Python for start up sequence, shutdown etc Experience in dSpace/Vector/NI tool chain Experience in Plant model creation and Simulation tools like CarSim, CarMaker Knowledge of CAN, UDS, XCP protocol and Flash bootloader integration Familiarity of functional safety concepts and ISO 26262 is desired Excellent communication, collaboration, analytical and problem-solving skills Familiarity with infrastructure tools like Requirements Management, Change Management and Version Management Requirement ESSENTIAL SKILLS /COMPETENCIES C++ PREFFERED SKILLS /COMPETENCIES C++