Maintenance Technician Supervisor Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: CM - Officer EHS (Environment, Health & Safety) Location: Pune Department: Construction Management EHS Cell Employment Type: Full-Time Experience: 5 to 8 Years Role Objective To ensure the effective implementation of Environment, Health & Safety (EHS) policies and procedures across construction, operations, and maintenance activities, promoting a safe and compliant work environment at project sites. Key Responsibilities Ensure EHS compliance across all construction, operation, and maintenance activities on assigned projects. Conduct daily safety inspections to enforce safe work practices and identify unsafe conditions. Monitor and ensure proper storage and disposal of hazardous waste in line with statutory norms. Oversee the maintenance and availability of firefighting systems and personal protective equipment (PPE). Maintain and update Material Safety Data Sheets (MSDS) for raw materials and chemicals on site. Deliver site-specific training programs for employees and contractors on: EHS regulations and compliance Safe handling of hazardous substances Proper usage of PPE Fire prevention and response Develop and maintain emergency contingency plans for the site. Issue safety alerts and communicate unsafe acts or conditions to project management promptly. Prepare and submit regular safety reports and documentation to relevant stakeholders. Design and conduct site-specific training modules and safety presentations for workers and supervisory staff. Carry out periodic audits of construction zones, labor camps, and material storage areas. Oversee health monitoring initiatives within labor camps and ensure hygienic living conditions. Ensure strict adherence to PPE protocols, display of safety signages, and compliance across all project levels and locations. Qualifications & Experience Education Mandatory: BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering Preferred Additional Certifications: Advanced Diploma in Industrial Safety Diploma in Fire & Safety Postgraduate Program in HSE Management NEBOSH General Certificate M.Tech in Safety or related field Experience 5 to 8 years of relevant EHS experience, preferably in: Real Estate Infrastructure Projects Large-Scale Construction Firms Skills & Competencies In-depth knowledge of EHS standards, safety regulations, and construction site risk mitigation Proficiency in safety audits, hazard identification, and preventive action planning Strong training and communication skills across multiple levels of workforce Proficiency in working languages: English, Hindi, and Marathi Qualification : BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Production Supervisor | Pune Job Description As a Production Supervisor, you will be responsible for supervising and coordinating the activities of production staff, including inspectors, machine operators, assemblers, fabricators, and plant personnel. You will ensure efficient workflow, quality standards, and timely completion of production targets while maintaining safety and compliance. Key Responsibilities Oversee daily production activities to maintain a steady and efficient workflow. Supervise and coordinate production workers such as inspectors, machine setters, assemblers, and operators. Monitor and assess individual and team performance, identifying strengths and areas for improvement. Ensure compliance with safety standards and operational procedures. Collaborate with cross-functional teams to resolve production issues and improve processes. Maintain production schedules and meet deadlines while optimizing resource utilization. Report on production metrics and provide feedback to management. Qualifications & Requirements Minimum 3 years of experience in production supervision or related manufacturing roles. High school diploma or equivalent required; additional technical qualifications are a plus. Strong problem-solving skills with the ability to analyze processes and implement improvements. Excellent leadership and team management abilities. Good communication skills to effectively coordinate with teams and management. Ability to apply logic and reasoning to identify alternative solutions and assess performance. Work in a supportive and professional environment. Opportunity to lead and develop a skilled production team. Gain experience in process optimization and operational excellence. Competitive salary and career growth opportunities. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Production

Job Title: CNC Technician Location: Pune, India Employment Type: Full-Time About Schaeffler Schaeffler is a dynamic global technology company driven by entrepreneurial spirit and long-standing private ownership. As a trusted partner to leading automobile manufacturers and key players in aerospace and industrial sectors, we provide exciting career growth opportunities and a collaborative, innovative work environment. Key Responsibilities Execute CNC machining operations to meet the defined tool manufacturing plan on a shift basis. Ensure optimal utilization of CNC machines and work to improve machine uptime. Perform programming and setup of CNC machines for new part numbers. Conduct in-process inspections after each machining step and maintain records. Work to reduce rejection and rework rates, aiming for zero defects. Train and support operators on CNC operations and process improvements. Identify process optimization opportunities to reduce machining costs by 10% annually. Collaborate with production teams to minimize tool downtime and improve overall productivity. Qualifications Education: Diploma in Mechanical Engineering (DME) or equivalent technical qualification. Experience: 3 to 8 years of experience working as a CNC Operator/Technician in a manufacturing or tool room environment, preferably in the automotive industry. Technical Skills: Strong expertise in CNC programming (G-Code, M-Code), setup, and troubleshooting. Hands-on experience with inspection tools and quality documentation. Proficiency in SAP for tool tracking and production reporting is preferred. Language Proficiency: English, Hindi, Marathi At Schaeffler, we value diversity, innovation, and collaboration. Join us and play a key role in shaping the future of precision manufacturing, while exploring your career development opportunities. Qualification : Diploma in Mechanical Engineering (DME) or equivalent technical qualification.

About Ugaoo and Garden & Services function At Ugaoo, we re not just building gardens we re cultivating a greener tomorrow. As India s most trusted gardening brand, our Garden Services & Maintenance function plays a pivotal role in transforming spaces and creating meaningful green experiences. This function offers a wide array of services, including: Landscape Development: Designing and developing sustainable outdoor spaces that blend beauty and functionality. Vertical Gardening: Innovating with modular green walls tailored for modern urban environments. Terrace & Indoor Gardens: Crafting lush, vibrant retreats in homes, offices, and commercial spaces. Hospitality Solutions: Curating greenery to enhance guest experiences in hotels, restaurants, and lounges. Corporate Renting: Providing flexible greenery solutions to bring life to workplace environments. Portable Walls: Designing easy-to-install green partitions for versatile indoor and outdoor use. Maintenance Services: Offering comprehensive care to ensure the long-term health and appeal of green spaces. Our work spans prestigious projects such as Rustomjee Crown, Kohinoor, Raheja Universal, Tsuki, Nativ, Wework, Roche, Snowflake and many others, showcasing our expertise across residential, commercial, hospitality and corporate landscapes. What This Role Offers This role is your opportunity to lead the creation and management of transformative green solutions. Joining Ugaoo means becoming part of a team driven by innovation, sustainability, and excellence, contributing to impactful gardening projects across the country. As Head of Garden Services & Maintenance, you will oversee landscaping, vertical gardening, and corporate/residential/hospitality maintenance projects. You will manage sales and operations across Pune and Mumbai, focusing on growth and city expansion. Reporting directly to our Founder, this strategic role involves close collaboration to shape the future of this key business function. Responsibilities: Strategy, Planning & Management Develop and implement a comprehensive sales strategy to drive revenue and profitability in Pune and Mumbai. Identify opportunities for expansion into new cities and markets, creating a roadmap for geographic growth. Establish partnerships with corporate clients, developers, and interior designers to build a robust customer pipeline. Design and execute marketing initiatives to promote landscaping, vertical gardening, and plant care services. Monitor key performance indicators (KPIs) for sales and operational efficiency, ensuring alignment with business goals. Project Management Plan and oversee end-to-end execution of landscaping, vertical gardening, and maintenance projects. Manage timelines, budgets, and resources to ensure high-quality project delivery. Collaborate with clients to understand their needs and customize solutions accordingly. Ensure all projects meet regulatory and safety standards. Customer Experience Establish processes to ensure prompt and effective resolution of customer queries and concerns. Gather feedback from clients to improve service offerings and build long-term relationships. Deliver a seamless and delightful customer experience, reinforcing the brand s reputation Operational Excellence Streamline processes to enhance efficiency, reduce costs, and maintain service quality. Oversee inventory management, including procurement of plants, materials, and equipment. Implement technology and tools to optimize scheduling, tracking, and reporting. Operational Excellence Work closely with the Founder to align the function's goals with the company's vision and objectives. Provide regular updates and insights on sales, operations, and market trends to guide strategic decision-making. Collaborate with other departments, such as marketing and operations, to ensure cohesive operations. Team Development/Leadership Foster an environment of high performance and continuous improvement, emphasizing learning, innovation, and a commitment to quality. Conduct regular performance reviews, provide constructive feedback, and implement tailored strategies to drive individual and team growth. Ensure team members receive timely and relevant training programs to enhance their technical expertise, customer service skills, and overall professional development. Requirements: Bachelor's/Master's degree in Horticulture or a related field. 8 10 years of experience in landscaping, garden maintenance, or similar functions, with at least 3 years in a leadership role. Proven track record in managing large-scale garden/landscape projects. Excellent knowledge of plant species, soil types and pest control. Strong leadership, problem-solving, and project management skills. Proficiency in budgeting, vendor management, and operations planning. Who We re Looking For We re seeking leaders who are ready to bring their expertise to a company on the rise. If you re motivated by the prospect of driving innovation, leading with purpose, and contributing to a legacy, Ugaoo offers the perfect environment for the next step in your career. Join us, and help shape the future of gardening and grow with us, because Plants Grow People. Qualification : Bachelor's/Master's degree in Horticulture or a related field.

About Us: At Ugaoo, we are more than just a gardening brand we re a movement. With over 135 years of experience in agriculture and horticulture through Namdeo Umaji Agritech, we re charting a fresh course for the future of gardening. The global gardening market is projected to grow to $120 billion by 2027, and Ugaoo is at the forefront of this exciting transformation. Ugaoo offers you the opportunity to be part of a dynamic, fast-growing company that combines time-tested wisdom with modern innovation. If you re looking to make an impact, challenge yourself, and grow both personally and professionally, Ugaoo is the perfect place for you. A Culture of Growth: We are GROWERS Growth-oriented, Resilient, Open-minded, Welcoming, Empathetic, and Responsible. These values are not just words; they guide everything we do. At Ugaoo, you ll find a supportive environment where your ideas are valued and your career can flourish. Room to Innovate: We encourage ownership and challenge the status quo. If you re someone who loves taking risks and exploring new ideas, this is the place for you. Performance-Driven Success: We reward ambition and recognize hard work. Your efforts will directly impact Ugaoo s success. Kinship and Collaboration: You re not just another employee; you re part of a team. We work together, celebrate together, and support each other at every step. Responsibilities: As a Horticulture Supervisor, you ll play a pivotal role in overseeing and managing day-to-day gardening tasks and the team. Your responsibilities include: Garden Management: Oversee daily gardening tasks such as planting, pruning, weeding, fertilizing, watering, and pest control across different projects. Ensure that all gardening equipment is maintained and in good working condition. Team Leadership: Lead, motivate, and supervise a team of gardeners. Develop and maintain weekly and monthly work schedules. Assign tasks based on priority, team skills, and project requirements. Conduct regular team meetings to discuss progress and address any issues. Client & Property Owner Liaison: Liaise with clients or property owners to understand their requirements and ensure satisfaction. Project Inspection & Reporting: Conduct regular inspections of projects to ensure work meets quality standards. Maintain records of tasks completed, schedules, and any encountered issues. Serve as the main point of contact between the gardening team and upper management. Requirements: Bachelor s degree or diploma in Horticulture or a related field. Minimum 3 years of experience in a similar role (e.g., Horticulture Supervisor, Maintenance Supervisor). Solid knowledge of indoor & outdoor plants, plant care techniques, landscape maintenance practices, and pest management. Strong leadership and supervisory skills with the ability to manage and motivate a team. Excellent organizational and time-management abilities. Self-motivated, target-oriented, and results-driven. Enjoy working in a collaborative team environment. Who We re Looking For: We are seeking someone who is passionate about plants, gardening, and e-commerce. If you thrive in a fast-paced environment, love taking ownership of your work, and want to be part of a super-passionate team, Ugaoo is the place for you. Bonus: your home will look amazing once you join us! Qualification : Bachelors Degree or Diploma in Horticulture or similar field

Role Overview: BMC is looking for a Lead DevOps Engineer to join our SaaS Operations team. This individual will play a critical role in the design, development, and implementation of complex applications and networking infrastructure across a range of cloud platforms including AWS, Google Cloud Platform (GCP), and Oracle. As the Lead, you will oversee the day-to-day operations of network infrastructure, ensure the performance and security of cloud services, and lead a team of network engineers and technicians. Key Responsibilities: Network Design and Implementation: Design and implement scalable, secure, and high-performance network infrastructure. Enforce network architecture standards and procedures. Oversee upgrades, expansions, and migrations to modern technologies. Team Leadership: Lead and mentor a team of network engineers, ensuring the effective allocation of resources. Conduct regular team meetings, provide technical guidance, and support team development. Network Performance and Security: Monitor network performance to ensure reliability and availability. Implement and manage network security, including firewalls, VPNs, and intrusion detection systems. Perform security assessments and vulnerability testing. Troubleshooting and Support: Oversee the resolution of complex network issues and escalations. Provide third-level support for network-related incidents and ensure timely troubleshooting. Project Management: Lead network projects from concept to implementation, ensuring timely delivery. Coordinate with other departments to achieve successful outcomes. Vendor Management: Manage vendor relationships and oversee the procurement of network hardware and software. Evaluate and recommend new network technologies. Documentation and Reporting: Maintain comprehensive network configuration and policy documentation. Provide regular reports on network performance, security, and project statuses. Ensure compliance with regulatory standards. Required Skills and Experience: Minimum 10 years of experience in network engineering, with at least 1 year in a leadership role. CCNP/CCIE certification required. Strong knowledge of network protocols, architecture, and security. Proficiency in BGP, Routing, IPsec Tunnels, VPC, VCN, subnets, TGW, DRG, and related technologies. Hands-on experience with Cisco routers, ASA/Firepower firewalls, and F5 load balancers. Expertise in AWS, Oracle, and Google Cloud (GCP) networking. Proficiency in Wireshark, Tcpdump, SSL certificates, and Cipher security lists. Experience with scripting and automation tools such as Python, Ansible, and Terraform. Familiarity with SD-WAN, Palo Alto firewalls, and VMware Technologies is a plus. Strong leadership, communication, and project management skills. Preferred Skills: Experience with cloud networking across AWS, Oracle, and GCP. Familiarity with network virtualization technologies. Knowledge of ITIL processes and practices. Working Conditions: Office-based with occasional on-site work. Availability for work outside regular business hours for network maintenance. Participate in the On-call rotation for incident management. Why Join BMC? At BMC, our culture thrives on diversity, inclusivity, and innovation. With over 6,000 brilliant minds across the globe, we foster an environment where your true self can shine. We believe in championing your growth and supporting you as you make a real impact. Diversity & Inclusion: BMC is dedicated to fostering a culture of equal opportunity, valuing the diversity of our employees. We strongly encourage individuals from all backgrounds to apply, ensuring that we approach challenges with a variety of perspectives.

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Officer/Engineer (MG5) Location: Pune Experience: 3 to 7 years Job Description: The Officer/Engineer will be responsible for implementing Pulse operations, training channel partners, and onboarding new partners to ensure smooth adoption of the system. This role requires strong collaboration with backend teams to resolve user interface issues for GOEMs (General Original Equipment Manufacturers), dealers, and the sales team in the field. Key Responsibilities: Implement and manage Pulse operations training for channel partners, GOEMs, and KGD (Kirloskar Group Dealers). Onboard and train new employees, dealers, and channel partners on system usage and processes. Collaborate closely with backend teams to troubleshoot and resolve system bugs affecting user interface and operations. Support IBG order processing, including entering orders, tracking job cards and production, and ensuring timely order execution. Monitor and report system bugs and coordinate fixes or new developments. Prepare and share presentations (PPTs) to communicate updates on system features and developments. Assist the IBG sales team in order entry and execution, ensuring accurate and efficient ERP order processing. Required Skills & Experience: 3 to 7 years of experience in operations or engineering roles involving system implementation and user training. Strong knowledge of Pulse operations and related system workflows. Experience with ERP order processing and sales support functions. Ability to identify and troubleshoot system bugs and collaborate with technical teams for resolution. Excellent communication and training skills to effectively onboard users and channel partners. Proficiency in preparing presentations and sharing system updates.

Plant Incharge | Pune Job Description The Plant Incharge is responsible for supervising the day-to-day operations of the manufacturing plant, ensuring continuous process optimization, safety compliance, and cost-effective production. You will lead and motivate your team to achieve operational goals while maintaining high-quality standards. Key Responsibilities Plan and draft timelines for plant operations and job completion. Demonstrate equipment operation, safety protocols, and work procedures to new and existing employees. Inspect materials, products, and equipment to identify defects or malfunctions. Monitor and evaluate the performance of subordinates, providing guidance and support. Ensure production processes are cost-effective and meet quality standards. Oversee maintenance and proper functioning of all plant machinery. Drive continuous improvement initiatives to optimize efficiency and productivity. Qualifications & Requirements Minimum 3 years of experience in plant management or related industrial operations. Highly organized with excellent attention to detail. Strong ability to manage multiple tasks and priorities efficiently. Effective communication and leadership skills. Knowledge of safety standards and compliance requirements. Lead operations in a challenging and rewarding industrial environment. Collaborate with a dedicated team focused on growth and improvement. Opportunity to develop your leadership skills and contribute to plant success. Competitive salary and benefits package. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Operations / Plant Management

Technical Lead - Product and Platform Engineering (Finance) About the Role: We are seeking a highly motivated and experienced Technical Lead to join our Product and Platform Engineering team within the Finance domain. This role requires 6-10 years of experience and a strong background in leading the development of Angular-based solutions, integrating them with Spring Boot, Kafka, and microservices. The ideal candidate will provide technical leadership, mentor junior engineers, drive best practices in Angular development, manage project timelines and resources, troubleshoot technical challenges, and optimize Angular applications for performance and usability. Staying current with industry trends is essential for enhancing our product offerings. Responsibilities: Lead the product and platform engineering team in developing and implementing Angular-based solutions using JavaScript, TypeScript, and AngularJS. Oversee the design and architecture of Angular applications, ensuring high performance and scalability. Collaborate with cross-functional teams to integrate the Angular front-end with Spring Boot back-end, Kafka messaging system, and microservices architecture. Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and excellence. Drive best practices in Angular development, including code reviews, testing, and documentation. Lead the implementation of responsive and user-friendly interfaces using HTML, CSS, and JavaScript. Manage project timelines, deliverables, and resources effectively to meet business objectives. Troubleshoot and resolve technical challenges in Angular and related technologies. Own the product and platform engineering roadmap, aligning it with organizational strategic goals. Drive continuous improvement and optimization of Angular applications, ensuring they meet performance, security, and usability standards. Stay updated on industry trends and technologies to enhance product and platform offerings. Qualifications: Bachelor of Technology (B.Tech) or Bachelor of Engineering (B.E) in Computer Science or Information Technology, or Master of Technology (M.Tech) in Software Engineering or Computer Science. 6-10 years of extensive experience in Angular development, including Angular 15 and AngularJS. Demonstrated advanced proficiency in Angular, leveraging TypeScript for robust front-end development and integration. Foundational skills in JavaScript. Intermediate to advanced expertise in Angular and TypeScript for creating scalable web applications. Strong foundation in front-end technologies for responsive web applications. Experience designing and implementing complex features using Angular. Proficiency in Java for back-end services development. Expertise in Kafka for real-time data processing and event-driven architectures. Experience integrating Angular with back-end systems and microservices architecture. Preferred Qualifications: Angular Developer Certification AWS Certified Solutions Architect About Altimetrik: Altimetrik delivers outcomes for our clients by rapidly enabling digital business & culture and infusing speed and agility into enterprise technology and connected solutions. We are practitioners of end-to-end business and technology transformation. We tap into an organization s technology, people, and assets to fuel fast, meaningful results for global enterprise customers across financial services, payments, retail, automotive, healthcare, manufacturing, and other industries. Founded in 2012 and with offices across the globe, Altimetrik makes industries, leaders and Fortune 500 companies more agile, empowered and successful. Altimetrik helps companies get unstuck . We re a technology company that gives organizations a process and context to solve problems in unconventional ways. We re a catalyst for organizations talent and technology, helping teams push boundaries and challenge traditional approaches. We make delivery more bold, efficient, collaborative and even more enjoyable. Qualification : Bachelor of Technology (B.Tech) or Bachelor of Engineering (B.E) in Computer Science or Information Technology, or Master of Technology (M.Tech) in Software Engineering or Computer Science.

Summary / Role Purpose The Business Operations Supervisor works with the Sales, Sales Operations, Legal, Export Compliance, Accounting, and other departments to process customer quotes and orders and create software license entitlement information. This role is responsible for supervising and leading a team of Business Operations Specialists and for verifying and reviewing the accuracy of orders, also completing and maintaining associated records and preparing related reports. Little direction required; the Business Operations Supervisor can handle complex tasks and orders and accomplish straightforward work without assistance. This role is expected to consistently take the initiative to assist others and further the objectives of the Business Operations Department. Key Duties and Responsibilities Processes software license orders and stock orders via multiple CRM systems and verifies license agreements in accordance with ANSYS, Inc. policies and procedures. Generates timely, accurate license keys and entitlements, and delivers them to sales channels and customers. Assists customers attempting to enroll for ANSYS, Inc. Customer Portal access. Utilizes CRM checks to strive for succinct data integrity. Acts as liaison to ANSYS, Inc. sales channel by providing quality customer service and support and resolving customer issues. Provides assistance to sales personnel for proper order submission and documentation. Proactively interfaces with Legal, Accounting, Sales, and other departments to drive procedural and policy adherence. Proactively seeks ways to improve workflow, including identification of better ways to provide value-added customer service. Consistently coaches and mentors other team members including training responsibilities. Leads group discussions and department projects such as developing rollout plans for product delivery. Approves complex orders/tasks as assigned. Ability to work different time zones (Japan, Europe, and the US) during predefined periods within a quarter as needed. Directly supervises and manages assigned Business Operations staff members. Establish and maintain effective working relationships with direct reports. Coach, evaluate and mentor staff. Assign tasks, ensures the quality of work, balances workloads. Identifies and addresses performance issues. Conduct and deliver mid-year and annual performance reviews. Assist with hiring activities; conducts interviews, hires and orients new employees. Minimum Education/Certification Requirements and Experience Education: Bachelor s Degree in Business plus a minimum of 5 years of experience in a billing, order processing, or customer service environment OR an AA degree, plus a minimum of 7 years of experience in a billing, order processing, or customer service environment. Excellent customer service skills and orientation. Strong interpersonal and communication skills, with the ability to facilitate training and presentations to internal and external customers. Ability to interact effectively with senior business managers. Possess a sense of urgency, strong organizational and analytical skills. Lead inter-department communication efforts on policy updates. Experience working in a database environment including report generation responsibilities. Demonstrated ability and experience in a detail-oriented position. Ability and willingness to perform in a fast-paced, rapidly changing environment. Demonstrated ability to multi-task in a deadline-driven environment. Ability to handle sensitive, complex, and confidential information. Previous experience with servicing global customers and prior CRM experience. Microsoft Office experience required. Preferred Qualifications and Skills A minimum of 8 years of experience in a billing, order processing, or customer service environment. Bachelor s Degree in Accounting or Business is preferred. Previous coaching and/or mentoring experience preferred. Experience with Salesforce CRM, Snowflake, and PowerBI. Process improvement experience. At Ansys, we know that changing the world takes vision, skill, and each other. We fuel new ideas, build relationships, and help each other realize our greatest potential. We are ONE Ansys. We operate on three key components: the commitments to our stakeholders, the behaviors of how we work together, and the actions of how we deliver results. Together as ONE Ansys, we are powering innovation that drives human advancement. Our Commitments Amaze with innovative products and solutions. Make our customers incredibly successful. Act with integrity. Ensure employees thrive and shareholders prosper. Our Values Adaptability: Be open, welcome what's next. Courage: Be courageous, move forward passionately. Generosity: Be generous, share, listen, serve. Authenticity: Be you, make us stronger. Our Actions We commit to audacious goals. We work seamlessly as a team. We demonstrate mastery. We deliver outstanding results. INCLUSION IS AT OUR CORE We believe diverse thinking leads to better outcomes. We are committed to creating and nurturing a workplace that fuels this by welcoming people, no matter their background, identity, or experience, to a workplace where they are valued and where diversity, inclusion, equity, and belonging thrive. WELCOME WHAT S NEXT IN YOUR CAREER AT ANSYS At Ansys, you will find yourself among the sharpest minds and most visionary leaders across the globe. Collectively we strive to change the world with innovative technology and transformational solutions. With a prestigious reputation in working with well-known, world-class companies, standards at Ansys are high met by those willing to rise to the occasion and meet those challenges head-on. Our team is passionate about pushing the limits of world-class simulation technology, empowering our customers to turn their design concepts into successful, innovative products faster and at a lower cost.

Alfa Laval India is looking for Electrical & Compliance Engineer responsible for product and technology development of decanters. About the Company: In Alfa Laval, we are every single day contributing to a more sustainable future for our planet through engineering innovation. Our global team designs and implements the refining, recycling and purifying process that allow our customers to be better themselves. You will find our work in leading applications for water purification, clean energy, food production, waste processing, pharmaceutical development and much more. The people of Alfa Laval enjoy the freedom to pursue ideas and the resources to see those ideas to become reality, in an environment that welcomes drive, courage and diversity. The result is a company where we all can be very proud of what we do. Our core competencies are in the areas of heat transfer separation, and fluid handling. We are dedicated to optimizing the performance of our customers' processes. our world-class technologies, our systems, equipment and services must create solutions that help our customers stay ahead. Please feel free to peruse our website www.alfalaval.com. The position / About the Job: In this job the Electrical and Compliance Engineer would be responsible for close cooperation with your colleagues in R&D as well as colleagues in other departments focusing on production, you will be engaged in the following tasks: Specifying new Motors Documentation / Guidelines for the processes. MPES (Minimum Efficiency Performance Standards) rules for motors. Motor requirement for WIMES Motors Motor Efficiency - IE3/ IE4 Motor requirement for ATEX Zone Maintenance of Motor Portfolio. IEC/ NEMA Standards Variable Frequency Drive (VFD s) Participate in decanter development projects. Implement and Maintain data in Product Lifecyle Management system./ Teamcenter Drive Engineering Change Notification (ECN) / Engineering Change Proposal (ECP)Process As an individual responsible for the continuous development and maintenance of products, as well as the innovation of new technology concepts, you are expected to take full ownership of your work. You are self-confident, self-driven, and adept at thinking outside the box to foster innovation and achieve excellence. Qualifications & experience: B.E. Electrical or B.E. Electrical and Electronics Engineer, having around 4+ years of experience in related industry. You have a theoretical background within Electrical / Electronic Engineering with Good Technical Skill. Knowledge around Motors (Preferably Industrial Motors) Knowledge around control Panels / Junction Box/ sensors. Knowledge about E-Plan/ Teamcenter It will be added advantage if you aware about Siemens and Allen Bradely software, Altium Designer, B&R Solution studio. Good cross-cultural understanding The job is based in Pune, India Around 15- 20 annual international travel days can be expected Why should you apply: We offer you an interesting and challenging position in an open and friendly environment where we help each other to develop and create value for our customers. Exciting place to build a global network with different nationalities. Your work will have a true impact on Alfa Laval s future success, you will be learning new things every day. A job in a growing international organization with many contacts and carrier opportunities and a result-oriented working environment "We care about diversity, inclusion and equity in our recruitment processes. We also believe behavioural traits can provide important insights into a candidate's fit to a role. To help us achieve this we apply Pymetrics assessments, and upon application you will be invited to play the assessment games. Qualification : B.E. Electrical or B.E. Electrical and Electronics Engineer, having around 4+ years of experience in related industry.

Job Description Senior Specialist, Manufacturing Automation The Manufacturing Execution System (MES) Senior Specialist acts as a subject matter expert for PAS-X MES focusing on electronic batch records design. The primary responsibility is to ensure that the deployment of the Werum/Korber PAS-X electronic Master Batch Records are successfully and compliantly designed, developed, deployed, and supported to maximize business benefits and are in line with site business process and technical standards. The MES Senior Specialist will also be responsible for updating the Master batch records for MES integrations DCS, SAP, LIMS etc. The Senior Specialist will be supporting MES implementations, product trainings, standards development, technical development of PAS-X specialist team in India. The Sr. Specialist is responsible for following standard processes and procedures in performing their duties. These include cGMP regulations, SOPs and global business processes. The MES Sr. Specialist is responsible for activities that include the following: Identifies and implements continuous process improvement opportunities. Sustainelectronic Master Batch Records, bringing together knowledge of manufacturing processes, and standard Werum/Korber generic master batch record (GMBR) configuration. Executes the appropriate change control and electronic Master Batch Record life-cycle actions and processes to assure the MES system is in a state of control and compliance. Collaborates and assists with troubleshooting to efficiently resolve manufacturing problems, providing MES support to ongoing Electronic Batch Record (EBR) operations. Knowledge of Quality Systems and Regulatory Standards to provide assurance and foster quality decisions with project teams and their site Quality unit. Work directly with Manufacturing sites point of contacts to understand the requirements related to MBR/GMBRs and implements them following the SOPs and Life cycle procedures using electronic validation softwares like eVal (Kneat Validation Software). Manages the GMBR design needs for group of sites from a region NA, EU etc. using demand and talent planning skills. Education Minimum Requirement: Bachelor s Degree and 8+ years of MES (PAS-X) experience or 12+ years of relevant MES experience Required Experience and Skills: Direct experience with MES (PAS-X) with strong experience in MBR, GMBR design, Integrations (SAP and L2 Systems with PAS-X) . Proven track record of analytical skills, problem solving and attention to detail. Demand and Talent Planning experience while implementing MES projects, tasks. High personal integrity, credibility, and energy Excellent communication and influencing skills. Strong written and verbal communication skills Minimum five (5) years of experience in a production regulated industry. Strong understanding of manufacturing principles/processes (preferably Biologics) and ability to translate manufacturing requirements into Automation/Digital Solution Preferred Experience and Skills: Knowledge of SAP Knowledge of L2 Systems (Aveva PI Historian, SCADA, DeltaV DCS) integration with PAS-X MES Qualification : Bachelors Degree and 8+ years of MES (PAS-X) experience or 12+ years of relevant MES experience

Job Details 1. Abstract and digitize Prime Vendor Agreements (PVAs) to support pricing tool data / input 2.Process Health Systems (HS) contracts, Community Retail & Long-Term Care (CRLTC) PVAs, and other contracts across the organization 3.Review and digitize contracts per the Service Level Agreement (SLA) 4.Collaborate with various functional teams regarding data interpretation and entry 5.Leverage the current abstraction methodology and format for determining terms, conditions, fields, and grids for digitization 6.Present to team on decisions and rational behind data input / digitization assumptions 7.Provide status updates to supervisors and other team members 8.Discuss / escalate day-to-day tasks with team supervisor as needed 9.Prepare for quarterly data quality review process / audit 10. Assist and support department managers in preparing for meetings 11. Maintain and promote positive and professional working relationships with associates and management 12. Comply with all appropriate policies, procedures, and regulations 13.Any other duties assigned . QUALIFICATIONS, EXPERIENCES, AND SKILLS: Bachelor s degree in finance, Business, or related field 1+ year(s) working experience Proficiency in the English language ( Ability to work partial US time zone shift (4 hours of overlap with Eastern Time Zone) Attention to detail, able to work independently in a dynamic environment Ability to hold high standard for data quality per quarterly review / audit process Ability to adjust approach relative to supervisor feedback Ability to interact with internal stakeholders Proficient in Microsoft Word, Excel and Outlook Strong written and verbal communication skills Ability to assimilate and summarize information in an appropriate context Commercial acumen, as well as the ability and willingness to be hands-on Experience collaborating in a multi-disciplinary, diverse, dynamic team Experience working with a team in multiple locations (including shared services) is preferred What Cencora offers Benefit offerings outside the US may vary by country and will be aligned to local market practice. The eligibility and effective date may differ for some benefits and for team members covered under collective bargaining agreements. Full time Qualification : Bachelors degree in finance, Business, or related field

Job Title: Database Administrator Location: Pune About Anchanto At Anchanto, we are enabling simpler, faster, and scalable eCommerce operations through our innovative and intelligent SaaS platforms. Our mission is to transform the way businesses conduct eCommerce, making backend operations more efficient for companies of all sizes. With a headquarters in Singapore, a global product engineering center in Pune, India, and a strong local presence in the countries we serve, Anchanto continues to grow rapidly, serving over 300 customers worldwide. As part of our expanding engineering team, we are seeking an experienced Database Administrator (DBA) to help us manage, optimize, and scale our database infrastructure. If you re passionate about database solutions and eager to work with cutting-edge technology in a fast-growing product company, we want to hear from you! Role Overview As a Database Administrator, you will be responsible for developing, managing, and optimizing database solutions to support our growing eCommerce platforms. Your expertise will ensure the high performance, availability, and security of our databases, including MySQL, Postgres, and potentially NoSQL databases. You will work closely with development teams to understand their needs and provide optimal database solutions, from design to performance tuning and high-availability configurations. Key Responsibilities Develop and design database solutions: Define the database physical structure and functional capabilities, ensuring they align with system requirements and security protocols. Database performance management: Configure and manage AWS RDS services, monitor database health, troubleshoot issues, and take corrective action as needed. Troubleshoot and resolve database issues: Act quickly to resolve database outages, errors, or performance issues, including providing after-hours and weekend support when necessary. Proactively monitor DB performance: Set up and configure monitoring tools to help detect potential risks and performance bottlenecks before they impact operations. Optimize database performance: Recommend and implement strategies for hardware upgrades, query optimization, indexing improvements, and server configuration adjustments to boost performance. Collaborate with development teams: Work closely with engineers to understand their database needs and design the most efficient and scalable database solutions. Ensure high availability and disaster recovery: Configure databases for high availability, clustering, and cloud deployment to maintain uptime and data redundancy. Administer database best practices: Own the database backup, restore, and retrieval processes, ensuring that all procedures adhere to best practices and compliance standards. Learning and adopting new technologies: Stay up to date with database technologies, including MySQL, Postgres, and NoSQL databases, and apply knowledge to improve solutions across the platform. What You ll Bring At least 5 years of hands-on experience as a DBA, with strong expertise in database administration, including backup management, performance monitoring, and tuning. Experience with MySQL and/or Postgres: Strong command over these relational databases, including managing stored procedures, triggers, indexes, and optimizing SQL queries for performance. AWS RDS experience: Proficiency in configuring and managing AWS RDS services, with an understanding of cloud-based database management. Strong knowledge of database design: Excellent understanding of data modeling and database schema design, with hands-on expertise in optimizing DB architecture for scalability and performance. Proven expertise in database tuning and performance optimization: Demonstrated ability to troubleshoot and optimize database performance for high-volume transactional systems. Experience with NoSQL databases: Exposure to NoSQL technologies such as MongoDB or Cassandra is a plus, as you may be involved in integrating such systems in the future. Bonus: Experience with Data Warehouse or BI (Business Intelligence) systems is a plus. Bonus: Prior experience in building high-performance e-commerce software is highly desirable. Strong communication and collaboration skills: Ability to work cross-functionally with development, DevOps, and other teams to ensure database solutions meet the needs of the business. Innovative & Fast-Growing Company: Join a dynamic, fast-growing SaaS company that is revolutionizing eCommerce operations for businesses worldwide. Cutting-Edge Technology: Work with modern database technologies, cloud platforms, and AI-powered solutions in an agile and collaborative environment. Career Growth: At Anchanto, we prioritize learning and development, offering a strong career path for those passionate about technology and growth. Work-Life Balance: We believe in a healthy work-life balance and offer flexible working hours and a supportive environment. Global Impact: Your work will impact hundreds of businesses globally, enhancing the performance and efficiency of their eCommerce platforms. If you're an experienced DBA looking for an exciting new challenge with a fast-growing product company, Anchanto could be the perfect place for you. Apply now to join our team and contribute to the next generation of eCommerce technology!

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)