Manufacturing Engineering Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Key Account Manager Regional Support (West Region) Location: Pune Experience Required: 10 12 Years Department: Sales & Business Development Industry: Automotive / Engineering / Manufacturing Educational Qualification: Minimum: BE/B.Tech Preferred: MBA in Marketing / Automotive Domain Role Summary: The Key Account Manager Support (Regional) plays a crucial role in driving sales growth, increasing share of business (SOB), and enhancing customer satisfaction by supporting both existing and new business development activities. This role bridges customers, internal business units, finance, and production teams to ensure efficient commercial and operational execution. Key Responsibilities: Customer Relationship & Account Management: Maintain and regularly update customer database (SOB, price history, contacts, etc.). Build and sustain long-term relationships with key OEM clients, including Yamaha, TVSM, and new 2W-EV customers (e.g., eBSA, E-Motorad, KINETIC). Handle export customer accounts, ensuring timely communication, coordination, and query resolution. Act as the primary point of contact for assigned customer accounts, ensuring prompt responses to all routine and strategic requirements. Business Development & Lead Generation: Generate new business opportunities through cold calls, networking, RFP responses, and market intelligence. Support the creation of business proposals, quotations, and commercial documentation. Identify cross-selling and up-selling opportunities within existing accounts to increase SOB. Commercial Support & Coordination: Collaborate with BUs/plants for timely invoice generation, PO compliance, and price amendments (BOPs/raw material). Coordinate with Finance and AR teams to manage receivables and ensure zero outstanding payments. Follow up with customers for invoice realization and help streamline processes related to accounts receivable. Work with internal stakeholders on part price amendments based on raw material cost fluctuations and commercial agreements. Project Execution & Internal Collaboration: Ensure smooth execution of new product development activities with cross-functional teams (Sales, R&D, SCM, Quality). Track development timelines and report status to internal and external stakeholders. Facilitate customer visits, audits, and reviews as required. Market & Competitor Insights: Monitor industry trends, competitor activity, and emerging customer requirements. Attend industry events, conferences, and customer forums to gather market intelligence and build a professional network. Required Skills & Competencies: Strong customer relationship management and negotiation skills. Good understanding of automotive components, raw materials, and BOP pricing. Excellent communication and presentation skills. Sound commercial acumen with ability to analyze market trends and financial data. Hands-on experience in sales pipeline management, lead conversion, and proposal drafting. Proficiency in MS Office Suite (Excel, Word, PowerPoint), ERP tools preferred. Key Accounts to Manage: Metallic Business Accounts Yamaha / TVSM Export Customers All regions New EV Two-Wheeler OEMs Western Region (e.g., eBSA, E-Motorad, KINETIC, etc.) Work with top automotive and EV OEMs in a fast-growing, innovation-driven company. Opportunity to lead key customer accounts and directly contribute to business growth. Collaborate with cross-functional leaders and gain exposure to global markets. Qualification : MBA in Marketing / Automotive Domain

Position: Senior Analyst TReC Costing Location: Pune, India Company: FORVIA (Faurecia Interior Systems) About FORVIA FORVIA is a global leader in automotive technology, focused on delivering innovative and sustainable mobility solutions. As the 7th largest global automotive supplier, we are shaping the future of mobility with over 157,000 employees in 43 countries. Your Mission As a Senior TReC Costing Analyst, you will be responsible for calculating and managing tooling reference costs for FORVIA Interior Systems programs. You will play a key role throughout the acquisition and development phases, working closely with cross-functional teams to ensure accurate, competitive, and optimized tooling cost estimations aligned with our program and business goals. Key Responsibilities Acquisition Phase Define the complete tooling package (in-house, bought-out parts, and assembly tools) per Program Management System (PMS) guidelines. Analyze the Bill of Materials (BOM) and process flow charts to build a detailed tooling list. Develop tooling concepts using CAD models, 2D drawings, and technical visuals (e.g., tool movements, inserts, cavities). Estimate tooling costs in alignment with the Tool & Equipment (T&E) strategy. Apply defined tooling margins and create pricing summaries in customer-specific (OEM) templates. Present and distribute cost breakdowns to internal stakeholders (Program Managers, T&E Buyers, etc.). Update and refine cost estimates across acquisition rounds, collaborating with Customer Business Units (CBUs). Contribute ideas to enhance FORVIA's competitiveness in project quotations. Development Phase Support Engineering and T&E Buyers with cost estimates for Engineering Change Requests (ECRs). During tooling RFQ (Request for Quotation) phases, calculate target costs based on part designs, technical specifications (IDS), and T&E strategies. Compare supplier cost breakdowns with TReC estimates during SNC (Supplier Nomination Committee) phases. Analyze gaps and provide justification or negotiation support to the Purchasing team. Maintain costing data for traceability and knowledge sharing post-nomination. Support tooling cost targets for engineering or program design changes. Cross-functional Collaboration Work closely with: CBU Cost Analysts (for both in-house and BOP parts), Central Costing Teams (to evolve TReC methodology), Global teams to ensure cost competitiveness and process alignment. Contribute to continuous improvement within the costing function by proposing innovative ideas and solutions. Your Profile Education & Experience Bachelor s or Master s degree in Engineering, or Diploma in Tool & Die Design. 6 10 years of experience in industrial environments, including exposure to production, tooling, or manufacturing engineering. Technical Skills Deep understanding of Injection Molding tools, post-processing tools (e.g., plastic welding, gauges, covering), and assembly processes. Familiarity with interior automotive components such as instrument panels, door panels, and center consoles. Knowledge of various supplier technologies is an advantage. Proficiency in interpreting CAD data and 2D technical drawings. Soft Skills Strong communication, analytical, and problem-solving abilities. Ability to synthesize complex technical data into actionable insights. Comfortable working cross-functionally and across international teams. Fluent in English (mandatory); basic knowledge of French or German is a plus. Global Impact: Work with a top-tier automotive supplier on industry-defining technologies. Innovation & Growth: Collaborate on high-impact projects and develop your career in a dynamic, global environment. Learning Culture: Access cutting-edge training through FORVIA University. Sustainability Leadership: Join a company committed to CO2 Net Zero and certified under the SBTi Net-Zero Standard. Inclusive Workplace: Thrive in a diverse, multicultural team that values collaboration and continuous improvement. Qualification : Bachelors or Masters degree in Engineering, or Diploma in Tool & Die Design

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Senior Data Scientist Location: Pune Employment Type: Full-Time Company: vConstruct (Construction Technology Company) About vConstruct vConstruct is a Pune-based construction technology company focused on revolutionizing the construction industry through advanced AI and ML solutions. Our Data Science and Analytics team comprises Data Scientists, AI Engineers, Data Analysts, and Data Engineers working collaboratively to drive innovation across all construction project phases from pre-construction to post-construction. Our mission is to harness the power of data and AI to improve predictability, automate processes, and enhance efficiency in construction domains such as scheduling, planning, supply chain, safety, quality control, site management, financials, and virtual design construction. Role Overview We are seeking a highly skilled Senior Data Scientist to lead the development of innovative AI and machine learning solutions focused on construction data. You will work on cutting-edge projects involving Computer Vision, Predictive Analytics, Generative AI, and Large Language Models (LLMs) using technologies such as MS Azure AI Services, OpenAI, and various ML frameworks. Key Responsibilities Collaborate strategically with cross-functional teams to identify and solve business problems through scalable AI/ML solutions. Analyze construction project data to develop predictive models using traditional methods and generative AI. Apply machine learning algorithms to enhance project execution, safety, risk assessment, and other core construction processes. Lead end-to-end development of scalable predictive and ML models, including hypothesis generation, development, deployment, and monitoring. Build, validate, and optimize machine learning and statistical models; review and quality control models developed by junior team members. Partner with engineering and business teams to deeply understand data, processes, and business requirements, and implement appropriate solutions. Stay updated on advances in data science and machine learning to continuously enhance vConstruct s capabilities. Use statistical techniques to detect anomalies and optimize workflows to ensure timely, cost-effective project delivery. Collaborate with product managers and business leaders to drive data-driven decision-making and communicate insights effectively. Visualize insights using BI tools to support stakeholders in understanding data outcomes. Key Projects Include Developing GPT-based language models customized for construction industry data (structured and unstructured). Utilizing computer vision for object detection on 2D drawings and 3D BIM models. Applying statistical frameworks to predict construction site losses, win/loss opportunities, and quantity forecasts. Integrating AI models deeply into construction operations to automate and improve efficiency. Qualifications Bachelor s or Master s degree in Computer Science, Data Science, Statistics, Mathematics, or a related field. 8-10 years of professional experience, including at least 6 years in data science, machine learning, and analytics. Proven track record of delivering impactful, production-ready AI/ML solutions. Experience managing multiple projects in fast-paced, dynamic environments. Strong business acumen with the ability to translate technical insights into actionable business strategies and communicate effectively with stakeholders. Experience with construction data or related industries (engineering, manufacturing) is a plus. Technical Skills Expertise in Python, R, or Scala programming. Proficiency with ML, AI, and statistical frameworks and libraries such as TensorFlow, PyTorch, scikit-learn. Strong experience in predictive analytics, clustering, classification, regression, and multivariate techniques. Hands-on experience with data visualization tools such as Tableau, Power BI, Matplotlib. Familiarity with cloud platforms (preferably Azure), Azure ML Services, and Snowflake is a plus. Strong SQL skills and experience working with relational databases. Knowledge of NLP and Computer Vision technologies is advantageous. If you re passionate about transforming the construction industry through AI/ML innovation and want to work with a talented, motivated team, apply now to join vConstruct s visionary journey. Qualification : Bachelors or Masters degree in Computer Science, Data Science, Statistics, Mathematics, or a related field

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Technical Specialist Armoured Vehicles Location: Pune Experience: 5 10 Years Education: B.E. in Mechanical Engineering Job Summary: We are looking for a highly skilled Technical Specialist Armoured Vehicles to join our engineering team in Pune. The role involves the end-to-end design, integration, and development of armoured vehicle systems, with a focus on CAD-based design, vehicle packaging, and aggregate integration. Job Purpose: To lead the design and development of armoured vehicles, ensuring functional integration of mechanical systems and effective packaging using advanced CAD tools. Key Responsibilities: Design & Integration: Perform vehicle integration and packaging of key aggregates (powertrain, suspension, electronics, etc.) using Creo or CATIA software. Design components including armoured hulls, braking systems, pneumatics, and other critical mechanical subsystems. Ensure optimal space utilization and system compatibility within the vehicle structure. Execution & Implementation: Translate technical requirements into detailed CAD models and engineering drawings. Collaborate with cross-functional teams to ensure design feasibility and compliance with performance, safety, and protection standards. Required Skills & Competencies: Functional Skills: In-depth knowledge of vehicle packaging principles, specifically for armoured vehicle platforms Strong understanding of mechanical systems integration in defense or specialized vehicle domains Technical Skills: Proficiency in CREO and/or CATIA for 3D modeling and design documentation Familiarity with defense standards and automotive design protocols Soft Skills / Behavioral Competencies: Effective stakeholder management across engineering, manufacturing, and procurement teams Solid project management abilities to drive timelines and coordinate technical deliverables Qualification : B.E. in Mechanical Engineering

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Description: Should have a good knowledge of DFMEA preparations for Axle, Suspension domain. To lead the DFMEA team for axles and suspensions. Should be able to work extensively on relating DVPs to DFMEA Good know how of Boundary diagrams, P-diagrams, functional schematics etc. Good skills in MS Excel and Word. Educational Qualification: BE / ME Number of Positions: 2 Skills: DFMEA

Designation: Design Engineer Education: Diploma in Plastic Mould Technology / Tool & Die Making from CIPET, IGTR, GTTC, NTTF, or CITD. Experience: 1-2 years of experience in Mould Design or Tool Room. Job Location: Viman Nagar, Pune Preferred Joining: December 2024 Job Responsibilities: Understand mould design concepts and processes. Design hot runner accessories and systems. Review and interpret customer mould data. Interact with customers to finalize system designs. Create 3D and 2D system designs. Deliver project files within customer timelines. Manage design revisions based on customer feedback. Schedule systems for production. Collaborate with the production team during system manufacturing. Key Requirements: Basic understanding of injection moulding machines and processes. Knowledge of mould construction and basic mould design. Understanding of plastic engineering and manufacturing processes. Familiarity with geometrical dimensions, tolerances, steel materials, and heat treatment processes. Software Skills: Proficiency in SolidWorks (or similar CAD software). Experience in 3D modelling and 2D drafting. Technical Knowledge: Mould design and tooling expertise. Working knowledge of SolidWorks. Proficiency in English (reading, writing, and communication). General computer skills. Personal Attributes: Precision, flexibility, and a problem-solving mindset. Strong communication skills, with clear and professional written and verbal English. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve key industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance performance, functionality, and sustainability in their products and processes. With over 11,800 employees representing 93 nationalities, Oerlikon operates in more than 38 countries and across 207 locations worldwide. We value diversity, innovation, and excellence, making us a trusted partner globally.

Job Title: Sales Support Engineer Qualifications: Post Diploma / Diploma in Plastic Mold Technology or related field Experience: 3-4 years in hot runner design, mold maintenance, or related fields Job Location: Viman Nagar, Pune Note: Immediate joining required Job Summary The Sales Support Engineer plays a vital technical role by ensuring customer requests are fulfilled with accuracy and precision. This role involves close collaboration with the sales team and customers to understand project specifications, analyze CAD files, and design preliminary hot runner systems using 3D modeling software and AutoCAD. The Sales Support Engineer also supports the CAE team in optimizing designs and assists service engineers in diagnosing and resolving system issues. Effective communication, attention to detail, and problem-solving abilities are essential to succeed in this role. Key Responsibilities Design preliminary hot runner systems using 3D modeling software and AutoCAD. Analyze customer requests and CAD files to identify critical technical aspects. Collaborate with Sales and Application Engineering teams to clarify project specifications. Ensure all necessary specifications are gathered and documented accurately. Conduct CAE simulations to optimize hot runner designs and interpret mold flow analysis results (pressure, injection times, flow rates, etc.). Verify compliance with internal standards and evaluate any deviations or process criticalities with the Mold Flow team before finalizing quotes. Prepare and submit mold flow requests with complete technical data. Communicate all design information accurately to the design department via the planning team and Sales Assistant. Provide technical support to service engineers for diagnosing and resolving hot runner system issues. Review alignment between technical specifications and commercial offers made to customers. Ensure technical accuracy of system configurations and maintain clear communication with sales and customers. Collaborate across departments to ensure customer and company requirements are met. Manage site visits to customer premises when needed, including supporting system trials, troubleshooting, and performance monitoring. Stay updated on industry trends and technological advancements in hot runner systems. Required Knowledge & Skills Basic knowledge of injection mold design, technical drawings, and plastic processing. Proficiency in 3D modeling software (SolidWorks) and AutoCAD. Strong communication and problem-solving abilities. Willingness to travel when required. Ability to manage multiple projects under tight deadlines. Team player with a customer-focused approach. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance the performance, functionality, and sustainability of their products and processes. With over 11,800 employees across 93 nationalities, operating in 38 countries and 207 locations, Oerlikon values diversity, innovation, and excellence, making us a trusted partner worldwide.

Job Title: Software Developer (C# .NET) Location: Pune Duties & Responsibilities Software Development: Develop and implement C# .NET software modules based on application architecture and project requirements. Conduct testing using simulation environments. Perform software commissioning and testing on machines. Participate in innovation projects to explore new technologies and improve processes. Design, build, and maintain efficient and reliable C# code. Clarify requirements, create technical specifications, and prepare implementation options in collaboration with clients. Create and maintain software documentation and coding guidelines. Manage source code using version control tools like Git/GitLab. Perform regular code reviews to ensure quality and compliance with standards. Advice and Support: Train and mentor new employees. Coordinate and supervise external partners when necessary. Ensure adherence to Oerlikon standards. Provide global software support for production teams. Offer technical consulting and support to other internal departments. Continuously update technology knowledge and share best practices within the team. Qualifications & Experience Graduate degree in Computer Engineering, IT, or equivalent (B.E./B.Tech/MCA). Minimum 5 years of hands-on software development experience using C# .NET, specifically in windows/desktop-based applications. Strong grasp of OOP concepts, design patterns, and MVC architecture. Expertise in Microsoft Visual Studio 2022 / VS Code. Experience with C# 12.0, .NET Framework 4.6.2, .NET Standard 2.0, .NET Core 5/6, WinForms, SVG, WCF, and SQL databases. Familiarity with version control tools (Git/GitLab) and CI/CD pipelines (DevOps). Working knowledge of project management tools like JIRA. Strong analytical and problem-solving skills. Proficiency in English (both written and spoken). About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing across industries such as aerospace, automotive, energy, tooling, and textiles. Our solutions enhance performance, functionality, and sustainability for our customers' products and processes. With over 11,800 employees across 93 nationalities in 38 countries and 207 locations, Oerlikon embraces diversity and is committed to fostering an inclusive and equitable workplace. Oerlikon is an Equal Opportunity Employer, promoting fair hiring and employment practices. Qualification : Graduate degree in Computer Engineering, IT, or equivalent (B.E./B.Tech/MCA).

Role: Software Engineer Embedded Systems Company: Whirlpool Corporation About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, driving innovation to enhance life at home. Our iconic brands include Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2023, Whirlpool reported approximately $19 billion in annual sales, with 59,000 employees and 55 manufacturing and technology research centers worldwide. Key Highlights: #1 Fortune 500 Consumer Durable company Market leader in North America, Latin America & leading western brand in Asia Annual sales turnover of $21 billion globally 70 manufacturing & technology centers globally 3 manufacturing locations in India Role Summary We are seeking a talented software engineer with expertise in embedded software development to join Whirlpool s global software development team. This role focuses on developing software for smart and connected home appliances, contributing to next-generation IoT innovations. Key Responsibilities Design and develop embedded software for Whirlpool products, with a strong focus on IoT integration. Analyze system requirements and translate them into software architecture and development tasks. Apply state-of-the-art industry solutions and best practices in embedded development. Develop and integrate software adhering to coding standards, design documentation, and unit testing. Collaborate across functional, technical, and code reviews. Provide creative and scalable solutions to complex software challenges. Minimum Requirements Bachelor s Degree in Electronics & Telecommunication (E&TC). 10+ years experience in embedded software development and microcontroller software design. Preferred Skills & Experience Bachelor s Degree in Electrical Engineering, Computer Engineering, or Computer Science. Strong expertise in IoT systems including TCP/IP stacks, WiFi networks, BLE, and RESTful protocols. Knowledge of network protocols (HTTPS, MQTT, JSON, XML). Understanding of encryption and OTA security protocols (TLS). Proficiency in C/C++, JavaScript, Java, Python, and Shell Scripting. Experience working in resource-constrained embedded environments. Solid understanding of data structures, algorithms, object-oriented design, operating systems, networking, wireless standards, and security protocols. Strong passion for innovation, learning, and applying cutting-edge technology to consumer products. Excellent communication skills and a collaborative mindset. If you re passionate about working at the intersection of software and smart appliances, this is an excellent opportunity to join a global leader in home innovation. Qualification : Bachelors Degree in Electronics & Telecommunication (E&TC).

Role Summary Product Design Engineer (Refrigerator Design) As a Product Design Engineer at Whirlpool, you will lead the design and development of parts for refrigerator products, focusing on plastics, sheet metal, and associated processes. You will leverage your expertise to drive the product lifecycle, from conceptualization to successful market delivery, ensuring that designs are manufacturable, reliable, and meet stringent safety standards. This role involves managing multiple projects, applying technical tools, and ensuring comprehensive project execution in a global engineering team environment. Educational Qualifications B.Tech in Mechanical Engineering or M.Tech in Design Engineering. Experience: B.E: 15-18 years M.Tech: 12-15 years Technical Expertise Design & Engineering: Proficiency in plastics and sheet metal design, specifically for refrigerator products. Solid understanding of engineering principles, including design for assembly, reliability, manufacturability, and safety. Expert in GD&T (Geometric Dimensioning & Tolerancing), design standards, and variation analysis. Strong skills in conceptualization, analytical thinking, and project planning/management. Ability to interpret simulation/test results to validate and improve designs. Project Management & Methodologies: Demonstrated ability to manage multiple projects simultaneously. Proficient in using APQP, OPEX/Six Sigma methodologies, and Lean tools for process improvement. Expertise in project planning, scope management, and risk management. Experience with tools like Concept Selection Matrix, DFMEA, Tolerance Stack-Ups, DVP, etc. Strong communication (written and verbal) and presentation skills. Managerial Expertise Global Team Experience: Exposure to working within a global engineering team, collaborating across diverse cultures and regions. Leadership Skills: Ability to coach, mentor, and direct engineers in subgroups, fostering an environment of growth and innovation. Flexibility & Adaptability: Skilled in adapting to fast-changing business needs and project priorities. Structured & Self-Organized: Ability to stay organized and structured in a dynamic, fast-paced work environment. Key Responsibilities Design and Documentation: Lead the design and release of product/subsystem/module/component designs and drawings as per project timelines and targets. Develop Design Validation & Verification Reports (Lab requests, Prototyping requests, Simulation requests). Document design guides, key suppliers, subsystem roadmaps, and ensure IP creation with an innovation-driven approach. Project Management: Drive projects using established product development processes across cross-functional teams. Manage project scope, schedule, and risk management to ensure execution aligns with agreed plans and cost targets. Lead and own cross-functional projects, coordinating with internal and external stakeholders. Develop and implement best practices for project management and work package management techniques. Technical Application & Tools: Apply Six Sigma tools (Certified Green/Black Belt), RCA, 8D, A3, DFMEA, and APQP methodologies. Utilize CAD tools (Creo 4.0/6.0), PLM Software (Windchill), and GD&T for tolerance stack-up analysis and design for variation. Conduct Value Analysis/Value Engineering (VAVE) and apply techniques to optimize designs and reduce costs. Additional Skills and Qualifications Certifications: PMP certification or equivalent project management training. Proven track record in leading product development projects, ensuring successful product integration across functions. In-depth experience working with global technology centers, vendors, manufacturing, and procurement teams to implement projects in production. At Whirlpool, you ll have the opportunity to work on innovative products that impact lives around the world. We value diversity and are committed to fostering an inclusive and supportive work environment where all employees are empowered to thrive.