Manufacturing Quality Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Key Account Manager Regional Support (West Region) Location: Pune Experience Required: 10 12 Years Department: Sales & Business Development Industry: Automotive / Engineering / Manufacturing Educational Qualification: Minimum: BE/B.Tech Preferred: MBA in Marketing / Automotive Domain Role Summary: The Key Account Manager Support (Regional) plays a crucial role in driving sales growth, increasing share of business (SOB), and enhancing customer satisfaction by supporting both existing and new business development activities. This role bridges customers, internal business units, finance, and production teams to ensure efficient commercial and operational execution. Key Responsibilities: Customer Relationship & Account Management: Maintain and regularly update customer database (SOB, price history, contacts, etc.). Build and sustain long-term relationships with key OEM clients, including Yamaha, TVSM, and new 2W-EV customers (e.g., eBSA, E-Motorad, KINETIC). Handle export customer accounts, ensuring timely communication, coordination, and query resolution. Act as the primary point of contact for assigned customer accounts, ensuring prompt responses to all routine and strategic requirements. Business Development & Lead Generation: Generate new business opportunities through cold calls, networking, RFP responses, and market intelligence. Support the creation of business proposals, quotations, and commercial documentation. Identify cross-selling and up-selling opportunities within existing accounts to increase SOB. Commercial Support & Coordination: Collaborate with BUs/plants for timely invoice generation, PO compliance, and price amendments (BOPs/raw material). Coordinate with Finance and AR teams to manage receivables and ensure zero outstanding payments. Follow up with customers for invoice realization and help streamline processes related to accounts receivable. Work with internal stakeholders on part price amendments based on raw material cost fluctuations and commercial agreements. Project Execution & Internal Collaboration: Ensure smooth execution of new product development activities with cross-functional teams (Sales, R&D, SCM, Quality). Track development timelines and report status to internal and external stakeholders. Facilitate customer visits, audits, and reviews as required. Market & Competitor Insights: Monitor industry trends, competitor activity, and emerging customer requirements. Attend industry events, conferences, and customer forums to gather market intelligence and build a professional network. Required Skills & Competencies: Strong customer relationship management and negotiation skills. Good understanding of automotive components, raw materials, and BOP pricing. Excellent communication and presentation skills. Sound commercial acumen with ability to analyze market trends and financial data. Hands-on experience in sales pipeline management, lead conversion, and proposal drafting. Proficiency in MS Office Suite (Excel, Word, PowerPoint), ERP tools preferred. Key Accounts to Manage: Metallic Business Accounts Yamaha / TVSM Export Customers All regions New EV Two-Wheeler OEMs Western Region (e.g., eBSA, E-Motorad, KINETIC, etc.) Work with top automotive and EV OEMs in a fast-growing, innovation-driven company. Opportunity to lead key customer accounts and directly contribute to business growth. Collaborate with cross-functional leaders and gain exposure to global markets. Qualification : MBA in Marketing / Automotive Domain

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Senior Data Scientist Location: Pune Employment Type: Full-Time Company: vConstruct (Construction Technology Company) About vConstruct vConstruct is a Pune-based construction technology company focused on revolutionizing the construction industry through advanced AI and ML solutions. Our Data Science and Analytics team comprises Data Scientists, AI Engineers, Data Analysts, and Data Engineers working collaboratively to drive innovation across all construction project phases from pre-construction to post-construction. Our mission is to harness the power of data and AI to improve predictability, automate processes, and enhance efficiency in construction domains such as scheduling, planning, supply chain, safety, quality control, site management, financials, and virtual design construction. Role Overview We are seeking a highly skilled Senior Data Scientist to lead the development of innovative AI and machine learning solutions focused on construction data. You will work on cutting-edge projects involving Computer Vision, Predictive Analytics, Generative AI, and Large Language Models (LLMs) using technologies such as MS Azure AI Services, OpenAI, and various ML frameworks. Key Responsibilities Collaborate strategically with cross-functional teams to identify and solve business problems through scalable AI/ML solutions. Analyze construction project data to develop predictive models using traditional methods and generative AI. Apply machine learning algorithms to enhance project execution, safety, risk assessment, and other core construction processes. Lead end-to-end development of scalable predictive and ML models, including hypothesis generation, development, deployment, and monitoring. Build, validate, and optimize machine learning and statistical models; review and quality control models developed by junior team members. Partner with engineering and business teams to deeply understand data, processes, and business requirements, and implement appropriate solutions. Stay updated on advances in data science and machine learning to continuously enhance vConstruct s capabilities. Use statistical techniques to detect anomalies and optimize workflows to ensure timely, cost-effective project delivery. Collaborate with product managers and business leaders to drive data-driven decision-making and communicate insights effectively. Visualize insights using BI tools to support stakeholders in understanding data outcomes. Key Projects Include Developing GPT-based language models customized for construction industry data (structured and unstructured). Utilizing computer vision for object detection on 2D drawings and 3D BIM models. Applying statistical frameworks to predict construction site losses, win/loss opportunities, and quantity forecasts. Integrating AI models deeply into construction operations to automate and improve efficiency. Qualifications Bachelor s or Master s degree in Computer Science, Data Science, Statistics, Mathematics, or a related field. 8-10 years of professional experience, including at least 6 years in data science, machine learning, and analytics. Proven track record of delivering impactful, production-ready AI/ML solutions. Experience managing multiple projects in fast-paced, dynamic environments. Strong business acumen with the ability to translate technical insights into actionable business strategies and communicate effectively with stakeholders. Experience with construction data or related industries (engineering, manufacturing) is a plus. Technical Skills Expertise in Python, R, or Scala programming. Proficiency with ML, AI, and statistical frameworks and libraries such as TensorFlow, PyTorch, scikit-learn. Strong experience in predictive analytics, clustering, classification, regression, and multivariate techniques. Hands-on experience with data visualization tools such as Tableau, Power BI, Matplotlib. Familiarity with cloud platforms (preferably Azure), Azure ML Services, and Snowflake is a plus. Strong SQL skills and experience working with relational databases. Knowledge of NLP and Computer Vision technologies is advantageous. If you re passionate about transforming the construction industry through AI/ML innovation and want to work with a talented, motivated team, apply now to join vConstruct s visionary journey. Qualification : Bachelors or Masters degree in Computer Science, Data Science, Statistics, Mathematics, or a related field

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Position: Junior Engineer Tool Design (Progressive Stamping / Press Tool) Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 2 4 years Industry: Plastic Injection Moulding & Automotive Components Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of high-precision plastic injection moulded components serving the automotive and other engineering industries. We are committed to delivering quality and innovation through continuous improvement and advanced engineering practices. Position Overview We are looking for a Junior Engineer Tool Design (Progressive Stamping) with hands-on experience in designing press tools. The ideal candidate will assist in 3D and 2D tool design, collaborate with senior designers and tool room teams, and contribute to the successful execution of tooling projects. Key Responsibilities Prepare 3D and 2D designs for press tools and progressive stamping dies. Collaborate with senior designers and the tool room team to document lessons learned from previous projects. Create detailed 2D drawings and perform cross-checks to ensure accuracy. Support root cause analysis for design-related issues and assist in implementing corrective actions. Adhere to project time plans and maintain timely documentation throughout the design phase. Follow and maintain 5S standards in the workplace. Ensure compliance with design and quality standards throughout the project lifecycle. Qualifications & Experience Diploma or BE in Mechanical Engineering. 2 4 years of experience in press tool / progressive stamping tool design. Required Skills Solid understanding of tool design principles and manufacturing processes. Proficiency in 3D and 2D CAD software (e.g., AutoCAD, SolidWorks, UG NX, or similar). Basic knowledge of design documentation and GD&T. Strong attention to detail, ability to multi-task, and meet project deadlines. Good knowledge of MS Office (Word, Excel, PowerPoint, Email, Internet). Effective communication and collaboration skills. Join RENATA to work alongside talented engineers in a fast-paced and innovation-driven environment. We support career development, offer hands-on project exposure, and foster a culture of teamwork and continuous improvement.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Production Supervisor | Pune Job Description As a Production Supervisor, you will be responsible for supervising and coordinating the activities of production staff, including inspectors, machine operators, assemblers, fabricators, and plant personnel. You will ensure efficient workflow, quality standards, and timely completion of production targets while maintaining safety and compliance. Key Responsibilities Oversee daily production activities to maintain a steady and efficient workflow. Supervise and coordinate production workers such as inspectors, machine setters, assemblers, and operators. Monitor and assess individual and team performance, identifying strengths and areas for improvement. Ensure compliance with safety standards and operational procedures. Collaborate with cross-functional teams to resolve production issues and improve processes. Maintain production schedules and meet deadlines while optimizing resource utilization. Report on production metrics and provide feedback to management. Qualifications & Requirements Minimum 3 years of experience in production supervision or related manufacturing roles. High school diploma or equivalent required; additional technical qualifications are a plus. Strong problem-solving skills with the ability to analyze processes and implement improvements. Excellent leadership and team management abilities. Good communication skills to effectively coordinate with teams and management. Ability to apply logic and reasoning to identify alternative solutions and assess performance. Work in a supportive and professional environment. Opportunity to lead and develop a skilled production team. Gain experience in process optimization and operational excellence. Competitive salary and career growth opportunities. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Production

Plant Incharge | Pune Job Description The Plant Incharge is responsible for supervising the day-to-day operations of the manufacturing plant, ensuring continuous process optimization, safety compliance, and cost-effective production. You will lead and motivate your team to achieve operational goals while maintaining high-quality standards. Key Responsibilities Plan and draft timelines for plant operations and job completion. Demonstrate equipment operation, safety protocols, and work procedures to new and existing employees. Inspect materials, products, and equipment to identify defects or malfunctions. Monitor and evaluate the performance of subordinates, providing guidance and support. Ensure production processes are cost-effective and meet quality standards. Oversee maintenance and proper functioning of all plant machinery. Drive continuous improvement initiatives to optimize efficiency and productivity. Qualifications & Requirements Minimum 3 years of experience in plant management or related industrial operations. Highly organized with excellent attention to detail. Strong ability to manage multiple tasks and priorities efficiently. Effective communication and leadership skills. Knowledge of safety standards and compliance requirements. Lead operations in a challenging and rewarding industrial environment. Collaborate with a dedicated team focused on growth and improvement. Opportunity to develop your leadership skills and contribute to plant success. Competitive salary and benefits package. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Operations / Plant Management

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Title: Software Developer (C# .NET) Location: Pune Duties & Responsibilities Software Development: Develop and implement C# .NET software modules based on application architecture and project requirements. Conduct testing using simulation environments. Perform software commissioning and testing on machines. Participate in innovation projects to explore new technologies and improve processes. Design, build, and maintain efficient and reliable C# code. Clarify requirements, create technical specifications, and prepare implementation options in collaboration with clients. Create and maintain software documentation and coding guidelines. Manage source code using version control tools like Git/GitLab. Perform regular code reviews to ensure quality and compliance with standards. Advice and Support: Train and mentor new employees. Coordinate and supervise external partners when necessary. Ensure adherence to Oerlikon standards. Provide global software support for production teams. Offer technical consulting and support to other internal departments. Continuously update technology knowledge and share best practices within the team. Qualifications & Experience Graduate degree in Computer Engineering, IT, or equivalent (B.E./B.Tech/MCA). Minimum 5 years of hands-on software development experience using C# .NET, specifically in windows/desktop-based applications. Strong grasp of OOP concepts, design patterns, and MVC architecture. Expertise in Microsoft Visual Studio 2022 / VS Code. Experience with C# 12.0, .NET Framework 4.6.2, .NET Standard 2.0, .NET Core 5/6, WinForms, SVG, WCF, and SQL databases. Familiarity with version control tools (Git/GitLab) and CI/CD pipelines (DevOps). Working knowledge of project management tools like JIRA. Strong analytical and problem-solving skills. Proficiency in English (both written and spoken). About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing across industries such as aerospace, automotive, energy, tooling, and textiles. Our solutions enhance performance, functionality, and sustainability for our customers' products and processes. With over 11,800 employees across 93 nationalities in 38 countries and 207 locations, Oerlikon embraces diversity and is committed to fostering an inclusive and equitable workplace. Oerlikon is an Equal Opportunity Employer, promoting fair hiring and employment practices. Qualification : Graduate degree in Computer Engineering, IT, or equivalent (B.E./B.Tech/MCA).

Job Title: CNC Technician Location: Pune, India Employment Type: Full-Time About Schaeffler Schaeffler is a dynamic global technology company driven by entrepreneurial spirit and long-standing private ownership. As a trusted partner to leading automobile manufacturers and key players in aerospace and industrial sectors, we provide exciting career growth opportunities and a collaborative, innovative work environment. Key Responsibilities Execute CNC machining operations to meet the defined tool manufacturing plan on a shift basis. Ensure optimal utilization of CNC machines and work to improve machine uptime. Perform programming and setup of CNC machines for new part numbers. Conduct in-process inspections after each machining step and maintain records. Work to reduce rejection and rework rates, aiming for zero defects. Train and support operators on CNC operations and process improvements. Identify process optimization opportunities to reduce machining costs by 10% annually. Collaborate with production teams to minimize tool downtime and improve overall productivity. Qualifications Education: Diploma in Mechanical Engineering (DME) or equivalent technical qualification. Experience: 3 to 8 years of experience working as a CNC Operator/Technician in a manufacturing or tool room environment, preferably in the automotive industry. Technical Skills: Strong expertise in CNC programming (G-Code, M-Code), setup, and troubleshooting. Hands-on experience with inspection tools and quality documentation. Proficiency in SAP for tool tracking and production reporting is preferred. Language Proficiency: English, Hindi, Marathi At Schaeffler, we value diversity, innovation, and collaboration. Join us and play a key role in shaping the future of precision manufacturing, while exploring your career development opportunities. Qualification : Diploma in Mechanical Engineering (DME) or equivalent technical qualification.