Manufacturing Standards Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Technical Specialist Armoured Vehicles Location: Pune Experience: 5 10 Years Education: B.E. in Mechanical Engineering Job Summary: We are looking for a highly skilled Technical Specialist Armoured Vehicles to join our engineering team in Pune. The role involves the end-to-end design, integration, and development of armoured vehicle systems, with a focus on CAD-based design, vehicle packaging, and aggregate integration. Job Purpose: To lead the design and development of armoured vehicles, ensuring functional integration of mechanical systems and effective packaging using advanced CAD tools. Key Responsibilities: Design & Integration: Perform vehicle integration and packaging of key aggregates (powertrain, suspension, electronics, etc.) using Creo or CATIA software. Design components including armoured hulls, braking systems, pneumatics, and other critical mechanical subsystems. Ensure optimal space utilization and system compatibility within the vehicle structure. Execution & Implementation: Translate technical requirements into detailed CAD models and engineering drawings. Collaborate with cross-functional teams to ensure design feasibility and compliance with performance, safety, and protection standards. Required Skills & Competencies: Functional Skills: In-depth knowledge of vehicle packaging principles, specifically for armoured vehicle platforms Strong understanding of mechanical systems integration in defense or specialized vehicle domains Technical Skills: Proficiency in CREO and/or CATIA for 3D modeling and design documentation Familiarity with defense standards and automotive design protocols Soft Skills / Behavioral Competencies: Effective stakeholder management across engineering, manufacturing, and procurement teams Solid project management abilities to drive timelines and coordinate technical deliverables Qualification : B.E. in Mechanical Engineering

Position: Senior Officer / Senior Engineer (MG4) Location: Pune Experience: 3 to 5 years Job Description: The Senior Officer / Senior Engineer will be responsible for engineering tasks related to customized design, matching, and development of technical systems tailored to prime movers for specific marine applications. The role requires working closely with tender requirements and inputs from customers and marketing teams. Key Responsibilities: Perform detailed design work using CREO software to develop customized solutions. Release application codes, technical drawings, and specifications necessary for manufacturing and procurement once orders are awarded. Provide technical support by preparing and updating part specifications and details for parts development and procurement teams. Support assembly and testing teams with relevant technical specifications and part creation/updation. Maintain and update documentation in compliance with Integrated Management System (IMS) requirements. Required Skills & Experience: 3 to 5 years of experience in engineering design, preferably in marine or related heavy engineering domains. Proficiency in CREO CAD software for detailed design work. Strong understanding of product lifecycle, from design to manufacturing support. Good documentation and compliance management skills, especially related to IMS standards. Ability to collaborate effectively with cross-functional teams including marketing, procurement, assembly, and testing.

Position: Junior Engineer Tool Design (Progressive Stamping / Press Tool) Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 2 4 years Industry: Plastic Injection Moulding & Automotive Components Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of high-precision plastic injection moulded components serving the automotive and other engineering industries. We are committed to delivering quality and innovation through continuous improvement and advanced engineering practices. Position Overview We are looking for a Junior Engineer Tool Design (Progressive Stamping) with hands-on experience in designing press tools. The ideal candidate will assist in 3D and 2D tool design, collaborate with senior designers and tool room teams, and contribute to the successful execution of tooling projects. Key Responsibilities Prepare 3D and 2D designs for press tools and progressive stamping dies. Collaborate with senior designers and the tool room team to document lessons learned from previous projects. Create detailed 2D drawings and perform cross-checks to ensure accuracy. Support root cause analysis for design-related issues and assist in implementing corrective actions. Adhere to project time plans and maintain timely documentation throughout the design phase. Follow and maintain 5S standards in the workplace. Ensure compliance with design and quality standards throughout the project lifecycle. Qualifications & Experience Diploma or BE in Mechanical Engineering. 2 4 years of experience in press tool / progressive stamping tool design. Required Skills Solid understanding of tool design principles and manufacturing processes. Proficiency in 3D and 2D CAD software (e.g., AutoCAD, SolidWorks, UG NX, or similar). Basic knowledge of design documentation and GD&T. Strong attention to detail, ability to multi-task, and meet project deadlines. Good knowledge of MS Office (Word, Excel, PowerPoint, Email, Internet). Effective communication and collaboration skills. Join RENATA to work alongside talented engineers in a fast-paced and innovation-driven environment. We support career development, offer hands-on project exposure, and foster a culture of teamwork and continuous improvement.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Production Supervisor | Pune Job Description As a Production Supervisor, you will be responsible for supervising and coordinating the activities of production staff, including inspectors, machine operators, assemblers, fabricators, and plant personnel. You will ensure efficient workflow, quality standards, and timely completion of production targets while maintaining safety and compliance. Key Responsibilities Oversee daily production activities to maintain a steady and efficient workflow. Supervise and coordinate production workers such as inspectors, machine setters, assemblers, and operators. Monitor and assess individual and team performance, identifying strengths and areas for improvement. Ensure compliance with safety standards and operational procedures. Collaborate with cross-functional teams to resolve production issues and improve processes. Maintain production schedules and meet deadlines while optimizing resource utilization. Report on production metrics and provide feedback to management. Qualifications & Requirements Minimum 3 years of experience in production supervision or related manufacturing roles. High school diploma or equivalent required; additional technical qualifications are a plus. Strong problem-solving skills with the ability to analyze processes and implement improvements. Excellent leadership and team management abilities. Good communication skills to effectively coordinate with teams and management. Ability to apply logic and reasoning to identify alternative solutions and assess performance. Work in a supportive and professional environment. Opportunity to lead and develop a skilled production team. Gain experience in process optimization and operational excellence. Competitive salary and career growth opportunities. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Production

Plant Incharge | Pune Job Description The Plant Incharge is responsible for supervising the day-to-day operations of the manufacturing plant, ensuring continuous process optimization, safety compliance, and cost-effective production. You will lead and motivate your team to achieve operational goals while maintaining high-quality standards. Key Responsibilities Plan and draft timelines for plant operations and job completion. Demonstrate equipment operation, safety protocols, and work procedures to new and existing employees. Inspect materials, products, and equipment to identify defects or malfunctions. Monitor and evaluate the performance of subordinates, providing guidance and support. Ensure production processes are cost-effective and meet quality standards. Oversee maintenance and proper functioning of all plant machinery. Drive continuous improvement initiatives to optimize efficiency and productivity. Qualifications & Requirements Minimum 3 years of experience in plant management or related industrial operations. Highly organized with excellent attention to detail. Strong ability to manage multiple tasks and priorities efficiently. Effective communication and leadership skills. Knowledge of safety standards and compliance requirements. Lead operations in a challenging and rewarding industrial environment. Collaborate with a dedicated team focused on growth and improvement. Opportunity to develop your leadership skills and contribute to plant success. Competitive salary and benefits package. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Operations / Plant Management

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a global leader in kitchen and laundry appliances, dedicated to improving life at home for families around the world. With a commitment to purposeful innovation and an iconic brand portfolio including Whirlpool, KitchenAid, Maytag, Consul, Brastemp, Amana, Bauknecht, JennAir, Indesit, and InSinkErator we combine cutting-edge technology with decades of expertise. In 2023, we reported approximately $19 billion in annual sales, supported by 59,000 employees and 55 manufacturing and technology research centers globally. Learn more at WhirlpoolCorp.com. About the Team Our Quality Assurance team plays a critical role in ensuring the highest product standards for our customers. This team works closely with suppliers to maintain quality, improve processes, and resolve issues quickly and effectively. From new product launches to ongoing supplier development, we partner with internal teams and external suppliers to drive a culture of excellence. About the Role As a Supplier Quality Engineer/Manager, you will be responsible for ensuring the performance and quality of direct material suppliers across Asia and IPO supply chains. You will lead new product integration (NPI) and existing product improvements (EPI) by driving supplier development processes, solving escalated quality issues, and collaborating closely with global teams. Your work will directly impact the quality and reliability of Whirlpool products delivered to millions of homes. Key Responsibilities Partner with suppliers to ensure flawless new product launches. Lead supplier quality processes for NPI and EPI projects, including APQP (Advanced Product Quality Planning) and PIQ (Purchase Item Qualification). Drive supplier performance improvement initiatives through data analysis, root cause identification, and action planning. Manage and resolve escalated quality issues through structured problem-solving processes like 8D. Conduct supplier process audits and risk assessments to identify improvement opportunities. Collaborate with global cross-functional teams to align supplier quality processes and ensure consistency. Provide training to suppliers on Whirlpool s quality systems, tools, and expectations, fostering a Zero Defect culture. Track, analyze, and report on supplier performance metrics such as SIR, PPM, and CAL. Participate in supplier qualification reviews and witness critical sample builds during new product launches. Champion Critical Parameters Management (CPM) to ensure focus on key product characteristics that impact performance and customer satisfaction. Education: Bachelor s degree in Mechanical Engineering (or related field). Experience: 7-10 years in Supplier Quality within Automotive, Home Appliances, or Consumer Durables industries. Technical Skills: Strong understanding of quality tools like APQP, PPAP, FMEA, SPC, MSA. Proficient in data analysis and statistical process control (SPC). Experience working directly with suppliers on quality improvement and new product launches. Certifications (Preferred): Six Sigma Green/Black Belt. Certified Quality Management Systems (QMS) Auditor. Soft Skills: Strong communication and relationship-building skills. Ability to collaborate across cultures and global teams. Analytical mindset with a proactive approach to problem-solving. Passion for driving quality excellence and continuous improvement. Work for a globally recognized Fortune 500 company. Collaborate with talented professionals from around the world. Be part of an innovative environment that values bold ideas and smart solutions. Enjoy a diverse and inclusive workplace where your voice matters. Contribute directly to products that improve life at home for millions. If you are passionate about quality, thrive in a collaborative environment, and are ready to drive supplier excellence in a globally respected organization, apply today! Qualification : Bachelors degree in Mechanical Engineering (or related field).