Manufacturing Support Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Technical Lead Software Engineering Location: Pune Employment Type: Full-Time About Calfus At Calfus, we build cutting-edge AI agents and enterprise software solutions that revolutionize how businesses operate. From cloud-based ERP integrations to AI-powered systems, we help startups and enterprises unlock their true potential. Our global team is made up of passionate, driven professionals who thrive on innovation and collaboration. As one of the fastest-growing players in the AI and software engineering space, we offer an exciting, high-energy work environment where your ideas are always welcome. About the Role We are looking for a Technical Lead Software Engineering (System Architecture & Design) to lead the design, development, and support of critical enterprise applications for manufacturing, shipping, and logistics. You ll play a hands-on leadership role, guiding development efforts, solving complex problems, and mentoring a team of engineers. Key Responsibilities System Architecture & Support: Manage and enhance enterprise applications used in manufacturing, shipping, and receiving. Development & Enhancements: Design, develop, test, and deploy scalable new features using Microsoft technologies. Issue Resolution: Troubleshoot and resolve complex system issues, ensuring high availability and reliability. Cross-Functional Collaboration: Work closely with internal teams to understand business needs and translate them into technical solutions. Performance Optimization: Ensure applications are performant, scalable, and secure. Documentation: Maintain accurate technical documentation, workflows, and design specs. End-User Training & Support: Provide user support and training to ensure effective adoption of new features. Mentorship: Guide junior engineers on best practices in architecture, development, and problem-solving. What You ll Need on Day One Bachelor s degree in Computer Science, IT, or related field. 5+ years of hands-on experience in software development and application support. Strong command of Microsoft technologies, especially VB.Net or C#. Proficient in SQL Server including writing complex queries, stored procedures, and data modeling. Excellent analytical and problem-solving skills. Strong communication and team collaboration abilities. Bonus Points If You Have Experience with VB (Visual Basic). Familiarity with SSIS and Entity Framework. Experience developing applications interfacing with PLC frameworks or industrial equipment. Knowledge of Jira and Confluence for agile workflows and documentation. Employee Benefits Comprehensive medical, group, and parental insurance. Gratuity and Provident Fund contributions. Wellness support and birthday leave. A culture of innovation, speed, and collaboration. Diversity & Inclusion At Calfus, we are proud to be an Equal Opportunity Employer. We value diversity and are committed to building an inclusive environment where everyone, regardless of background or identity, can thrive. Apply now and join our team in transforming businesses through technology. Qualification : Bachelors degree in Computer Science, IT, or related field

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Senior Analyst TReC Costing Location: Pune, India Company: FORVIA (Faurecia Interior Systems) About FORVIA FORVIA is a global leader in automotive technology, focused on delivering innovative and sustainable mobility solutions. As the 7th largest global automotive supplier, we are shaping the future of mobility with over 157,000 employees in 43 countries. Your Mission As a Senior TReC Costing Analyst, you will be responsible for calculating and managing tooling reference costs for FORVIA Interior Systems programs. You will play a key role throughout the acquisition and development phases, working closely with cross-functional teams to ensure accurate, competitive, and optimized tooling cost estimations aligned with our program and business goals. Key Responsibilities Acquisition Phase Define the complete tooling package (in-house, bought-out parts, and assembly tools) per Program Management System (PMS) guidelines. Analyze the Bill of Materials (BOM) and process flow charts to build a detailed tooling list. Develop tooling concepts using CAD models, 2D drawings, and technical visuals (e.g., tool movements, inserts, cavities). Estimate tooling costs in alignment with the Tool & Equipment (T&E) strategy. Apply defined tooling margins and create pricing summaries in customer-specific (OEM) templates. Present and distribute cost breakdowns to internal stakeholders (Program Managers, T&E Buyers, etc.). Update and refine cost estimates across acquisition rounds, collaborating with Customer Business Units (CBUs). Contribute ideas to enhance FORVIA's competitiveness in project quotations. Development Phase Support Engineering and T&E Buyers with cost estimates for Engineering Change Requests (ECRs). During tooling RFQ (Request for Quotation) phases, calculate target costs based on part designs, technical specifications (IDS), and T&E strategies. Compare supplier cost breakdowns with TReC estimates during SNC (Supplier Nomination Committee) phases. Analyze gaps and provide justification or negotiation support to the Purchasing team. Maintain costing data for traceability and knowledge sharing post-nomination. Support tooling cost targets for engineering or program design changes. Cross-functional Collaboration Work closely with: CBU Cost Analysts (for both in-house and BOP parts), Central Costing Teams (to evolve TReC methodology), Global teams to ensure cost competitiveness and process alignment. Contribute to continuous improvement within the costing function by proposing innovative ideas and solutions. Your Profile Education & Experience Bachelor s or Master s degree in Engineering, or Diploma in Tool & Die Design. 6 10 years of experience in industrial environments, including exposure to production, tooling, or manufacturing engineering. Technical Skills Deep understanding of Injection Molding tools, post-processing tools (e.g., plastic welding, gauges, covering), and assembly processes. Familiarity with interior automotive components such as instrument panels, door panels, and center consoles. Knowledge of various supplier technologies is an advantage. Proficiency in interpreting CAD data and 2D technical drawings. Soft Skills Strong communication, analytical, and problem-solving abilities. Ability to synthesize complex technical data into actionable insights. Comfortable working cross-functionally and across international teams. Fluent in English (mandatory); basic knowledge of French or German is a plus. Global Impact: Work with a top-tier automotive supplier on industry-defining technologies. Innovation & Growth: Collaborate on high-impact projects and develop your career in a dynamic, global environment. Learning Culture: Access cutting-edge training through FORVIA University. Sustainability Leadership: Join a company committed to CO2 Net Zero and certified under the SBTi Net-Zero Standard. Inclusive Workplace: Thrive in a diverse, multicultural team that values collaboration and continuous improvement. Qualification : Bachelors or Masters degree in Engineering, or Diploma in Tool & Die Design

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Position: Senior Officer / Senior Engineer (MG4) Location: Pune Experience: 3 to 5 years Job Description: The Senior Officer / Senior Engineer will be responsible for engineering tasks related to customized design, matching, and development of technical systems tailored to prime movers for specific marine applications. The role requires working closely with tender requirements and inputs from customers and marketing teams. Key Responsibilities: Perform detailed design work using CREO software to develop customized solutions. Release application codes, technical drawings, and specifications necessary for manufacturing and procurement once orders are awarded. Provide technical support by preparing and updating part specifications and details for parts development and procurement teams. Support assembly and testing teams with relevant technical specifications and part creation/updation. Maintain and update documentation in compliance with Integrated Management System (IMS) requirements. Required Skills & Experience: 3 to 5 years of experience in engineering design, preferably in marine or related heavy engineering domains. Proficiency in CREO CAD software for detailed design work. Strong understanding of product lifecycle, from design to manufacturing support. Good documentation and compliance management skills, especially related to IMS standards. Ability to collaborate effectively with cross-functional teams including marketing, procurement, assembly, and testing.

Job Title: Assembler Sustaining Engineer Location: Pune, Maharashtra, India Travel: Occasional business travel may be required About BMC At BMC, trust is more than a value it s how we operate. We are an award-winning, inclusive workplace that celebrates diversity, innovation, and the passion to give back. We believe in work-life balance, empowering individuals, and creating an environment where you feel inspired and supported every day. Your wins will be celebrated, your growth championed, and your contributions deeply valued. We enable our customers to become Autonomous Digital Enterprises ready to take on the future with confidence. The Opportunity: Join the team behind Control-M, BMC s powerful orchestration and automation platform used by the world s top organizations to automate business-critical processes from data pipelines to financial transactions. As a z/OS Assembler Specialist in our Product R&D Support team, you'll work on sustaining engineering and APAR (Authorized Program Analysis Reports) development for mainframe systems. If you're driven by solving complex challenges, collaborating globally, and making a direct impact on product stability and customer satisfaction, this role is for you. Key Responsibilities: Join a dedicated team responsible for product support and APARs development for BMC s mission-critical Mainframe (z/OS) products. Develop and maintain diagnostic tools and solutions to improve the supportability and performance of the product. Contribute to APAR development cycles with a focus on timely delivery and quality. Take ownership of technical issues and work them through to resolution. Collaborate with global teams across functions to ensure product quality meets enterprise-level expectations. Share knowledge, best practices, and mentor others to elevate team capabilities. Qualifications: Bachelor s degree in Computer Science, Engineering, or a related field. 5+ years of experience in an engineering role within a Mainframe z/OS environment. Strong programming experience in Assembler language. Proficiency with z/OS internals, including JCL, JES2/3, SMS. Ability to analyze system dumps using IPCS. Hands-on experience with SMP/E for software maintenance. Strong analytical and troubleshooting skills with customer-focused problem-solving ability. Excellent communication and collaboration skills; capable of working both independently and as part of a team. Nice to Have: Experience with Java, C, or C++ Familiarity with UNIX System Services and Language Environment on z/OS Background in an enterprise product-based company Over 6,000 employees globally, united by innovation and collaboration A culture that recognizes and celebrates your individuality Continuous learning opportunities and exposure to cutting-edge technologies A commitment to creating an inclusive and empowering workplace That s okay. We value diverse backgrounds and perspectives. If you're excited about this role and BMC, we still encourage you to apply. BMC is proud to be an equal opportunity employer. Qualification : Bachelors degree in Computer Science, Engineering, or a related field.

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Position: Junior Engineer Tool Design (Progressive Stamping / Press Tool) Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 2 4 years Industry: Plastic Injection Moulding & Automotive Components Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of high-precision plastic injection moulded components serving the automotive and other engineering industries. We are committed to delivering quality and innovation through continuous improvement and advanced engineering practices. Position Overview We are looking for a Junior Engineer Tool Design (Progressive Stamping) with hands-on experience in designing press tools. The ideal candidate will assist in 3D and 2D tool design, collaborate with senior designers and tool room teams, and contribute to the successful execution of tooling projects. Key Responsibilities Prepare 3D and 2D designs for press tools and progressive stamping dies. Collaborate with senior designers and the tool room team to document lessons learned from previous projects. Create detailed 2D drawings and perform cross-checks to ensure accuracy. Support root cause analysis for design-related issues and assist in implementing corrective actions. Adhere to project time plans and maintain timely documentation throughout the design phase. Follow and maintain 5S standards in the workplace. Ensure compliance with design and quality standards throughout the project lifecycle. Qualifications & Experience Diploma or BE in Mechanical Engineering. 2 4 years of experience in press tool / progressive stamping tool design. Required Skills Solid understanding of tool design principles and manufacturing processes. Proficiency in 3D and 2D CAD software (e.g., AutoCAD, SolidWorks, UG NX, or similar). Basic knowledge of design documentation and GD&T. Strong attention to detail, ability to multi-task, and meet project deadlines. Good knowledge of MS Office (Word, Excel, PowerPoint, Email, Internet). Effective communication and collaboration skills. Join RENATA to work alongside talented engineers in a fast-paced and innovation-driven environment. We support career development, offer hands-on project exposure, and foster a culture of teamwork and continuous improvement.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Plant Incharge | Pune Job Description The Plant Incharge is responsible for supervising the day-to-day operations of the manufacturing plant, ensuring continuous process optimization, safety compliance, and cost-effective production. You will lead and motivate your team to achieve operational goals while maintaining high-quality standards. Key Responsibilities Plan and draft timelines for plant operations and job completion. Demonstrate equipment operation, safety protocols, and work procedures to new and existing employees. Inspect materials, products, and equipment to identify defects or malfunctions. Monitor and evaluate the performance of subordinates, providing guidance and support. Ensure production processes are cost-effective and meet quality standards. Oversee maintenance and proper functioning of all plant machinery. Drive continuous improvement initiatives to optimize efficiency and productivity. Qualifications & Requirements Minimum 3 years of experience in plant management or related industrial operations. Highly organized with excellent attention to detail. Strong ability to manage multiple tasks and priorities efficiently. Effective communication and leadership skills. Knowledge of safety standards and compliance requirements. Lead operations in a challenging and rewarding industrial environment. Collaborate with a dedicated team focused on growth and improvement. Opportunity to develop your leadership skills and contribute to plant success. Competitive salary and benefits package. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Operations / Plant Management

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Description: Should have a good knowledge of DFMEA preparations for Axle, Suspension domain. To lead the DFMEA team for axles and suspensions. Should be able to work extensively on relating DVPs to DFMEA Good know how of Boundary diagrams, P-diagrams, functional schematics etc. Good skills in MS Excel and Word. Educational Qualification: BE / ME Number of Positions: 2 Skills: DFMEA

Job Description: Key Responsibilities: Working knowledge of Durability domain (theory & principles of Linear, Non-Linear, Fatigue and Vibrations) Working knowledge of vehicle durability assessment and testing Analysis model building for vehicle aggregates, BIW, suspension, trims, full Vehicle durability simulation etc. Sound knowledge mechanical engineering and automotive engineering. In-depth knowledge of vehicle Durability domain for theory, objective & subjective assessment, experimental data analysis, durability target setting, root cause analysis. In depth knowledge of vehicle subsystem / systems (e.g., Body, trims, Powertrain, Suspension, Chassis etc) for construction, operation & its dynamics. Expert in meshing and modelling software in Automotive companies or Engineering services company with hands on Durability-CAE tools. Educational Qualification: BE / B.Tech / ME / M.Tech Number of Positions: 3 Skills: ANSA & Abaqus

Job Title: Sales Support Engineer Qualifications: Post Diploma / Diploma in Plastic Mold Technology or related field Experience: 3-4 years in hot runner design, mold maintenance, or related fields Job Location: Viman Nagar, Pune Note: Immediate joining required Job Summary The Sales Support Engineer plays a vital technical role by ensuring customer requests are fulfilled with accuracy and precision. This role involves close collaboration with the sales team and customers to understand project specifications, analyze CAD files, and design preliminary hot runner systems using 3D modeling software and AutoCAD. The Sales Support Engineer also supports the CAE team in optimizing designs and assists service engineers in diagnosing and resolving system issues. Effective communication, attention to detail, and problem-solving abilities are essential to succeed in this role. Key Responsibilities Design preliminary hot runner systems using 3D modeling software and AutoCAD. Analyze customer requests and CAD files to identify critical technical aspects. Collaborate with Sales and Application Engineering teams to clarify project specifications. Ensure all necessary specifications are gathered and documented accurately. Conduct CAE simulations to optimize hot runner designs and interpret mold flow analysis results (pressure, injection times, flow rates, etc.). Verify compliance with internal standards and evaluate any deviations or process criticalities with the Mold Flow team before finalizing quotes. Prepare and submit mold flow requests with complete technical data. Communicate all design information accurately to the design department via the planning team and Sales Assistant. Provide technical support to service engineers for diagnosing and resolving hot runner system issues. Review alignment between technical specifications and commercial offers made to customers. Ensure technical accuracy of system configurations and maintain clear communication with sales and customers. Collaborate across departments to ensure customer and company requirements are met. Manage site visits to customer premises when needed, including supporting system trials, troubleshooting, and performance monitoring. Stay updated on industry trends and technological advancements in hot runner systems. Required Knowledge & Skills Basic knowledge of injection mold design, technical drawings, and plastic processing. Proficiency in 3D modeling software (SolidWorks) and AutoCAD. Strong communication and problem-solving abilities. Willingness to travel when required. Ability to manage multiple projects under tight deadlines. Team player with a customer-focused approach. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance the performance, functionality, and sustainability of their products and processes. With over 11,800 employees across 93 nationalities, operating in 38 countries and 207 locations, Oerlikon values diversity, innovation, and excellence, making us a trusted partner worldwide.