Material Specifications Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Analog Engineer Location: Pune Role Overview Join our dynamic R&D team as an Analog Engineer, contributing your expertise to develop cutting-edge electronics hardware for instrumentation products used in the process industry. This role involves close collaboration with diverse stakeholders including Digital Business Leaders, Customer Support, and Branch Engineers to ensure smooth project execution and high customer satisfaction. Occasional travel may be required to engage with vendors, stakeholders, and maintain strong customer relationships. Purpose of the Role Design and develop high-quality analog electronics hardware that meets stringent industry requirements for performance, reliability, safety, and environmental standards in instrumentation products. Technical Responsibilities Understand product requirement specifications, incorporating electrical, communication protocols, environmental, EMC, safety, industrial design, performance, and reliability standards into your designs. Design electronics circuits interfacing with various sensors, input/output signals, communication protocols (UART, RS232, RS485, I2C, SPI, HART, PROFIBUS, FIELDBUS, Wireless, etc.), display and keypad (UI) devices, microcontrollers, ADCs, DACs, display chips, and special function ICs. Develop designs suitable for 2-wire transmitters, actuators, indicators, converters, sensors (4-20mA), IEPE vibration sensors, battery-powered sensors, and wireless devices. Implement analog signal processing and control functions including scaling, amplification, filtering, integration, differentiation, multiplication, compression, clipping, clamping, linearizing, isolation, ON-OFF, PID, etc. Design linear and switching power supplies to power circuits and external devices. Implement PCB designs considering constraints such as space, parasitic effects, signal and power integrity, thermal management, RF/EMC considerations, manufacturability, and usability. Test designs thoroughly through in-house labs, external labs, and field site validations to ensure all requirements are met. Ensure adherence to target material cost budgets. Operate and utilize test and measurement instruments such as DMM, DSO, function and signal generators, pulse generators, counter timers, spectrum analyzers, LCR meters, HV testers, and network analyzers. Utilize development tools like SPICE, 3D modeling software, Mathcad, and EDA tools (Pads, Cadence) effectively. Qualification & Experience Master s or Bachelor s degree in Electronics, Electronics & Telecommunication, or equivalent discipline 4 to 5 years of relevant experience in analog hardware design for instrumentation or related fields Qualification : Masters or Bachelors degree in Electronics, Electronics & Telecommunication, or equivalent discipline

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Senior Analyst TReC Costing Location: Pune, India Company: FORVIA (Faurecia Interior Systems) About FORVIA FORVIA is a global leader in automotive technology, focused on delivering innovative and sustainable mobility solutions. As the 7th largest global automotive supplier, we are shaping the future of mobility with over 157,000 employees in 43 countries. Your Mission As a Senior TReC Costing Analyst, you will be responsible for calculating and managing tooling reference costs for FORVIA Interior Systems programs. You will play a key role throughout the acquisition and development phases, working closely with cross-functional teams to ensure accurate, competitive, and optimized tooling cost estimations aligned with our program and business goals. Key Responsibilities Acquisition Phase Define the complete tooling package (in-house, bought-out parts, and assembly tools) per Program Management System (PMS) guidelines. Analyze the Bill of Materials (BOM) and process flow charts to build a detailed tooling list. Develop tooling concepts using CAD models, 2D drawings, and technical visuals (e.g., tool movements, inserts, cavities). Estimate tooling costs in alignment with the Tool & Equipment (T&E) strategy. Apply defined tooling margins and create pricing summaries in customer-specific (OEM) templates. Present and distribute cost breakdowns to internal stakeholders (Program Managers, T&E Buyers, etc.). Update and refine cost estimates across acquisition rounds, collaborating with Customer Business Units (CBUs). Contribute ideas to enhance FORVIA's competitiveness in project quotations. Development Phase Support Engineering and T&E Buyers with cost estimates for Engineering Change Requests (ECRs). During tooling RFQ (Request for Quotation) phases, calculate target costs based on part designs, technical specifications (IDS), and T&E strategies. Compare supplier cost breakdowns with TReC estimates during SNC (Supplier Nomination Committee) phases. Analyze gaps and provide justification or negotiation support to the Purchasing team. Maintain costing data for traceability and knowledge sharing post-nomination. Support tooling cost targets for engineering or program design changes. Cross-functional Collaboration Work closely with: CBU Cost Analysts (for both in-house and BOP parts), Central Costing Teams (to evolve TReC methodology), Global teams to ensure cost competitiveness and process alignment. Contribute to continuous improvement within the costing function by proposing innovative ideas and solutions. Your Profile Education & Experience Bachelor s or Master s degree in Engineering, or Diploma in Tool & Die Design. 6 10 years of experience in industrial environments, including exposure to production, tooling, or manufacturing engineering. Technical Skills Deep understanding of Injection Molding tools, post-processing tools (e.g., plastic welding, gauges, covering), and assembly processes. Familiarity with interior automotive components such as instrument panels, door panels, and center consoles. Knowledge of various supplier technologies is an advantage. Proficiency in interpreting CAD data and 2D technical drawings. Soft Skills Strong communication, analytical, and problem-solving abilities. Ability to synthesize complex technical data into actionable insights. Comfortable working cross-functionally and across international teams. Fluent in English (mandatory); basic knowledge of French or German is a plus. Global Impact: Work with a top-tier automotive supplier on industry-defining technologies. Innovation & Growth: Collaborate on high-impact projects and develop your career in a dynamic, global environment. Learning Culture: Access cutting-edge training through FORVIA University. Sustainability Leadership: Join a company committed to CO2 Net Zero and certified under the SBTi Net-Zero Standard. Inclusive Workplace: Thrive in a diverse, multicultural team that values collaboration and continuous improvement. Qualification : Bachelors or Masters degree in Engineering, or Diploma in Tool & Die Design

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

Position: Site Engineer Location: Pune Job Description Study project drawings and understand specifications thoroughly. Identify discrepancies in drawings and escalate them to the Senior Engineer. Communicate daily resource requirements to the Senior Engineer. Obtain necessary work permits for daily activities. Raise material indents with approval from the Senior Engineer. Promptly inform seniors about any issues affecting work progress. Ensure optimal use of materials and proper upkeep of company assets. Perform daily concrete reconciliation and submit reports to the billing department. Execute work according to tender specifications and the latest approved drawings, ensuring that staff and contractors have access to the most current versions. Adhere to the agreed micro-schedule to meet project deadlines. Actively participate in daily stand-up meetings to discuss progress and challenges. Qualifications Experience: 1 to 5 years in civil engineering/construction. Education: BE or Diploma in Civil Engineering. Qualification : BE or Diploma in Civil Engineering

Job Description Job Title: Electrical Designer You are a part of Hardware Engineering Group under MRI Business, located at Philips Healthcare Innovation Centre (HIC) Pune. HIC is playing a key role in Philips global strategy for Diagnostic Imaging. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards healthcare growth markets Your Role: Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications. Ensuring that the design is consistent with the higher-level architecture and requirements. Ensuring that the proposed design would have the safety, reliability and quality features built-in. Responsible for ensuring that the design meets the performance, quality and cost criteria. Conduct concept and feasibility studies. Leads the introduction of new technologies. Ensuring that there is proper documentation per standards for the developed design. Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification. Ensuring that his/her design modules meet the product certification requirements. Drawing up personal schedule and reports on progress. Defining and assessing the Work Breakdown Structure/planning/costs of his/her area. Being abreast of technical developments in own field through study of literature and technical contacts. Maintaining product and company reputation by complying with country specific regulations. Supplier evaluation and communication. You're the right fit if: Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience. Knowledge of state-of-the-art methods/tools (CAD/simulation) used in Electrical, PCB and Cable harness design. Experience in New Product Introduction (NPI), Product Life Cycle Management, Obsolescence Management/Sustenance and Value Engineering. Exposure to Analog, Mixed Signal Board Design and Power Electronics designs. Experience in 16/32-bit microcontroller-based design and interfacing. Knowledge of Cable harness design for power, analog-digital signal, Communication, RF, audio/video and fiber optics cabling. Working knowledge on the selection of electronic components, cable and connectors. Knowledge of communication interfaces like RS232, RS485, CAN, EtherCAT, Ethernet and USB. Knowledge of EMI/EMC standards and testing for conformance. Hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics). Ability to understand and debug problems across hardware/software boundaries. Should have experience in DFMEA and design of Fail-safe systems and Sub-systems. Should have good fundamental knowledge of Motors/Motor Drivers/ Position, Speed Encoders and should be able to analyze motor under different operating modes such as regenerative mode. Experience in design of a communication gateway will be an added advantage. Should have experience in design of high-speed digital interface. Knowledge of mechanical design compatibility aspects. Knowledge of IEC 60601 standards will be an added advantage. Knowledge of Embedded Software Programming will be an added advantage. Ability to understand and debug problems across hardware/software boundaries. Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage. Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc. will be an added advantage. Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent. Disciplined team worker, ability to work independently. Result oriented team player. Ability to present and articulate ideas to key stakeholders and leadership team. Excellent communication skills and Positive can do attitude. Quality mindset in design and documentation. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Qualification : Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience.

Tactical Buyer Location: Pune Experience: 4 6 Years Department: Purchase / Procurement Education: Graduate / Diploma / Engineering (preferred) Key Tools: SAP, MS Excel Job Summary We are seeking an experienced Tactical Buyer to manage the procurement of services and plant-related requirements through effective sourcing, negotiation, and vendor management. The role requires hands-on experience with the P2P cycle, SAP, and the ability to manage a diverse range of service categories across admin, plant utilities, and annual maintenance contracts. Key Responsibilities 1. Procurement Process Management Handle the end-to-end P2P cycle, from PR to PO and payment follow-up. Coordinate with internal stakeholders to understand technical specifications and scope of work. Identify potential vendors and float RFQs (Request for Quotation). Negotiate for cost optimization, extended credit terms, and favorable contract conditions. Create and analyze commercial comparison sheets. Obtain necessary approvals via digital portals as per Delegation of Authority (DoA). Ensure timely PO issuance, GRN/Service Entry, and vendor payment follow-up. 2. Category Ownership Responsible for sourcing and procurement of: Admin Services: Canteen, housekeeping, gardening, OHC, health check-ups. Hospitality: Corporate events, offsite get-togethers, celebrations. AMCs & Services: Calibration, pest control, environmental monitoring, equipment maintenance. Utilities: HVAC, fire fighting systems, ETP/STP, RO plants, cranes, forklifts, waste disposal. Plant & Facility Maintenance Services 3. Tools & Process Efficiency Utilize SAP for PR/PO creation and tracking. Maintain data and comparisons in MS Excel. Use e-Auction/Online Procurement portals where applicable. Ensure alignment with internal procurement policies and compliance requirements. Skills & Competencies In-depth knowledge of procurement operations and service sourcing. Strong negotiation and vendor management capabilities. Proficient in SAP (MM module) and Excel-based analysis. Ability to manage multiple priorities and stakeholders. Strong communication and documentation skills. Qualification : Graduate / Diploma / Engineering (preferred)

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Position: Executive Stores Manager Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Educational Qualification: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or a related field (or equivalent experience) Job Purpose We are seeking a skilled and detail-oriented Executive Stores Manager to manage and improve warehouse operations in our construction equipment production facility. This role focuses on SAP Warehouse Management (SAP-WM), collaboration with third-party logistics (3PL) partners, warehouse layout planning, inventory optimization, and accurate documentation. The ideal candidate will play a key role in streamlining processes to ensure timely material supply and efficient warehouse performance. Key Responsibilities SAP-WM Master Data Maintenance Create and maintain accurate master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies in SAP-WM data to ensure seamless warehouse and 3PL coordination. Ensure compliance with internal standards and 3PL integration requirements. Process Improvement in SAP-WM Analyze current warehouse operations to identify inefficiencies in SAP-WM workflows. Propose, implement, and document process enhancements to boost productivity and accuracy. Collaborate with IT, warehouse operations, and 3PL teams to customize SAP-WM functionalities to evolving business needs. Warehouse Layout & Optimization Design and optimize warehouse layouts to improve space utilization and material flow. Regularly assess and update layouts to accommodate new products and changing production or 3PL requirements. PFEP (Plan for Every Part) Management Develop and maintain PFEP documentation to streamline material movement and inventory control. Coordinate with production, procurement, and 3PL partners to ensure alignment with production schedules. Record Keeping & Documentation Maintain accurate and audit-ready documentation of inventory movement, SAP-WM transactions, and 3PL logistics. Ensure regulatory compliance and adherence to company policies. Warehouse Inbound/Outbound Operations Oversee inbound (receiving, put-away) and outbound (picking, shipping) operations, ensuring timely and accurate logistics in partnership with 3PL teams. Align material flow with production timelines and customer delivery expectations. Production Line Feeding Manage just-in-time (JIT) material replenishment to production lines, reducing downtime and excess inventory. Work with 3PL and production teams to ensure consistent and timely part delivery. Required Skills & Competencies Minimum 3 years of experience in warehouse operations with a strong focus on SAP-WM. Hands-on experience in master data management and process optimization in SAP. Experience collaborating with third-party logistics (3PL) teams on inbound/outbound and delivery schedules. Proficient in PFEP creation, warehouse layout planning, and production line material flow. Strong grasp of inbound/outbound logistics, inventory control, and lean warehousing principles. Excellent problem-solving, analytical, and organizational skills. Strong interpersonal and cross-functional communication skills. Attention to accuracy in documentation, compliance, and reporting. Familiarity with construction equipment or heavy machinery production is an advantage. SAP-WM certification is a plus. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or a related field (or equivalent experience)

Position: Warehouse Specialist Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Education: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience) Job Summary We are looking for a Warehouse Specialist to join our construction equipment production warehouse team. The ideal candidate will play a key role in optimizing warehouse operations through the maintenance of SAP-Warehouse Management (SAP-WM) master data, driving continuous improvements, planning warehouse layouts, and ensuring seamless collaboration with third-party logistics (3PL) partners. This role supports production by ensuring efficient material movement and inventory control aligned with business goals. Key Responsibilities SAP-WM Master Data Management Create, update, and manage master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies and maintain data accuracy for effective coordination with internal teams and 3PL. SAP-WM Process Improvement Analyze and enhance existing SAP-WM processes to improve productivity, system performance, and 3PL integration. Document and implement optimized workflows in collaboration with IT and warehouse operations. Warehouse Layout & Space Optimization Design and revise warehouse layouts to maximize space utilization, improve material flow, and meet changing production needs. Conduct regular assessments based on inventory trends and 3PL operational requirements. PFEP (Plan for Every Part) Develop and maintain PFEP documentation to ensure efficient inventory management and line-side material delivery. Work closely with procurement, production, and logistics to align inventory plans with manufacturing schedules. Record Keeping & Documentation Maintain accurate records of inventory movement, SAP-WM transactions, and 3PL documentation. Ensure compliance with audit standards, company policies, and safety regulations. Warehouse Operations (Inbound & Outbound) Oversee receiving, put-away, picking, and dispatch operations, ensuring timely material flow. Collaborate with 3PL teams to meet customer commitments and production timelines. Production Line Material Feeding Ensure timely material replenishment to production lines based on JIT and lean principles. Coordinate closely with 3PL and production teams to prevent delays or inventory build-up. Required Skills & Competencies 3+ years of hands-on experience in warehouse operations with a focus on SAP-WM. Expertise in maintaining SAP-WM master data and leading process improvement initiatives. Strong knowledge of inbound/outbound logistics, inventory control, and production line support. Experience coordinating with third-party logistics (3PL) partners. Familiarity with PFEP generation and warehouse layout planning. Understanding of lean warehousing and JIT inventory management. Excellent record-keeping, compliance awareness, and documentation accuracy. Strong problem-solving, communication, and cross-functional collaboration skills. Experience in construction equipment or heavy machinery manufacturing is a plus. SAP-WM certification or equivalent training is preferred. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience)

Position: Supply Chain Senior Engineer Location: Pune Reports To: Assistant General Manager Supply Chain Educational Qualification: B.E. Mechanical / Industrial Production Experience: 4 7 years Purpose of the Role To ensure timely and efficient procurement of materials in alignment with production needs, while maintaining optimum inventory levels and driving operational excellence across the supply chain. Key Responsibilities Procurement & Inventory Management Release purchase orders and manage end-to-end procurement activities in line with ERP processes. Monitor material availability to meet production schedules while avoiding overstock and stockouts. Implement engineering changes with minimal impact on inventory, obsolescence, and scrap. Stakeholder Communication & Coordination Liaise with suppliers, service providers, and internal departments to ensure smooth material flow. Build and maintain strong, reliable supplier relationships. Escalate unresolved issues to the reporting manager in a timely manner. Compliance & Process Adherence Follow standard operating procedures (SOPs) and organizational protocols rigorously. Ensure adherence to company guidelines on sourcing processes, compliance, and ethical conduct. Key Skills & Competencies Proficient in managing A-Class procurement, including local and imported long-lead items. Strong knowledge of ERP systems and digital procurement tools. Understanding of manufacturing processes and production planning. Familiarity with supply chain principles like cycle time, lead time, JIT, Kanban, push/pull systems. Effective communication and interpersonal skills for internal and external coordination. Strong organizational and planning abilities with a problem-solving mindset. Qualification : B.E. Mechanical / Industrial Production

Job Title: Executive Business Development Location: Pune Experience: Minimum 3 Years Employment Type: Full-Time Reporting To: Senior Manager Business Development Role Overview: The Executive Business Development supports sales growth and client acquisition in the real estate sector. The role focuses on lead identification, client engagement, coordination with channel partners, and assisting in the execution of business development strategies. The ideal candidate, with an MBA and 3 years of relevant experience, should have strong communication skills, a passion for real estate, and a results-driven approach. Key Responsibilities: 1. Lead Generation & Client Engagement Identify and pursue new client leads via cold calls, field visits, and networking Manage and convert inquiries into site visits and meetings 2. Site Visit Coordination Arrange and conduct property site visits for prospective buyers Effectively explain project features, specifications, and USPs during visits 3. Sales & Conversion Support Assist senior sales team with sales proposals and documentation Follow up with leads through calls, emails, and meetings until closure 4. Channel Partner Interaction Coordinate with brokers and channel partners for project promotion and lead generation Share project updates, brochures, and support materials regularly 5. Market Intelligence Gather data on market trends, competitor projects, pricing, and customer preferences Provide inputs to improve project positioning and sales strategy 6. Reporting & MIS Maintain records of leads, follow-ups, site visits, and conversions Share daily/weekly updates and dashboards with the reporting manager 7. Event Participation Support organization and participation in property exhibitions, investor meets, and promotional events Represent the company professionally at public forums Technical Skills Required: Strong understanding of real estate products and buyer behavior Proficiency in MS Office and CRM systems Basic knowledge of RERA and property documentation processes Good presentation and data handling skills Qualifications & Experience: Education: MBA in Marketing, Sales, or Business Development Experience: Minimum 3 years of experience in business development or sales, preferably in real estate Job Summary: The Executive Business Development plays a critical role in lead generation, prospect conversion, and supporting the sales pipeline within the real estate sector. Leveraging excellent communication skills and market knowledge, this position contributes directly to revenue growth and enhances brand visibility. The role offers strong career progression opportunities within the business development team. Qualification : MBA in Marketing, Sales, or Business Development

Job Title: Graphic Designer Location: Pune Experience: Minimum 3 Years Employment Type: Full-Time Reporting To: AGM Marketing Role Overview: We are seeking a creative and detail-oriented Graphic Designer with a passion for real estate marketing. This role involves conceptualizing, designing, and delivering high-quality visuals for print, digital, and on-ground branding. The ideal candidate should possess a strong design sensibility, proficiency in industry-standard tools, and the ability to transform marketing strategies into compelling visual stories that engage and convert. Key Responsibilities: 1. Creative Design & Visual Development Design brochures, flyers, hoardings, project presentations, and site branding materials. Create digital assets for social media, web banners, email campaigns, and WhatsApp creatives. Ensure brand consistency across all platforms, aligned with the company s visual identity. 2. Branding & Identity Design Develop brand identities for new real estate projects, including logos, typography, and color palettes. Design signage, event creatives, and customer-facing collaterals for project sites and marketing events. 3. Coordination & Execution Work closely with the marketing team to understand campaign objectives and deliver effective visual solutions. Coordinate with agencies, vendors, printers, and photographers for timely production and execution. Adapt designs for multiple formats and mediums (print, digital, large-format, etc.). 4. Presentation & Content Support Design investor decks, sales presentations, and pitch materials with engaging visual layouts. Collaborate with copywriters and marketing managers to enhance storytelling through visuals. 5. Real Estate-Specific Design Tasks Design formatted layouts for floor plans, master plans, and elevation renders (based on 3D inputs). Assist in preparing RERA-compliant ads, brochures, and statutory marketing materials. Maintain a centralized repository of all design assets and project creatives. Qualifications & Experience: Education: Bachelor s Degree or Diploma in Graphic Design, Visual Communication, Fine Arts, or a related field. Experience: Minimum 3 years of experience in graphic design, preferably within the real estate industry. Key Skills & Competencies: Technical Skills Proficiency in Adobe Creative Suite: Photoshop, Illustrator, InDesign (mandatory) Knowledge of CorelDRAW, Canva, and basic video editing using Premiere Pro or After Effects (preferred) Understanding of layout principles, color theory, typography, printing techniques, and brand consistency Familiarity with design specifications for digital and social media platforms Behavioural Skills Strong creativity and attention to detail Effective communication and teamwork Ability to manage multiple projects under tight deadlines Receptive to feedback and committed to continuous learning Self-motivated, organized, and quality-conscious Job Summary: As a Graphic Designer, you will play a key role in shaping the visual identity of our residential and commercial real estate projects. You will collaborate with the marketing team to bring campaigns to life through high-impact, brand-consistent designs that drive engagement and business growth. Your work will directly contribute to how the Tejraj Group is perceived across the market both online and offline. Qualification : Bachelors Degree or Diploma in Graphic Design, Visual Communication, Fine Arts, or a related field

Job Title: Android Developer About the Role IVS Software Solutions is seeking a skilled and motivated Android Developer to join our team. You will be responsible for end-to-end Android application development, collaborating closely with clients and internal teams to deliver high-quality, scalable, and user-centric mobile applications. This role requires a strong understanding of Android development, attention to detail, and excellent communication skills. Roles and Responsibilities: Define Clear Objectives Understand project requirements and define actionable goals for each development phase to stay focused and organized. Effective Communication Maintain regular updates with team members and clients. Communicate progress, address roadblocks, and seek feedback to align with project goals. Adherence to Design Guidelines Follow Android Material Design principles to ensure a consistent and intuitive user experience across devices. API Integration Integrate external APIs and data sources securely and efficiently. Handle edge cases and errors gracefully. Unit Testing Write and maintain comprehensive unit tests to validate app functionality and reliability. Bug Fixing & Performance Optimization Identify and fix bugs. Continuously analyze and optimize code for performance. Continuous Learning Stay current with emerging Android technologies, tools, and best practices. Documentation Document code, architecture, and APIs clearly for easy collaboration and future reference. Professional Conduct Maintain professionalism in team and client interactions. Meet deadlines and proactively address challenges. Key Requirements: Bachelor s degree in Computer Science, Engineering, or a related field. 1+ years of experience in Android application development. Proficiency in Kotlin, Java, Android SDK, and Android NDK. Familiar with RESTful APIs integration. Proficient in using Git or other version control systems. Knowledge of testing tools relevant to Android development. Strong analytical and problem-solving skills. Experience in a start-up environment is a plus. Qualification : Bachelors degree in Computer Science, Engineering, or a related field.