Mechanical Systems Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Mechanical Engineer (BIM) Location: Pune Experience: 1 5 Years Qualification: B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering Role Overview: We are seeking a highly motivated Mechanical Engineer (BIM) with hands-on experience in Revit MEP and BIM coordination to join our Pune-based team. The ideal candidate will work on a variety of domestic and international projects, handling mechanical services modeling, coordination, documentation, and BIM standards compliance across all stages of the project lifecycle. Key Responsibilities: Review project specifications and technical documents to support BIM execution. Assist in Revit model setup and input data validation. Perform mechanical services modeling using Autodesk Revit MEP and ensure coordination with architecture, structure, electrical, and other disciplines. Support creation of Revit content, parametric families, and detailed mechanical models including HVAC, plumbing, and fire protection systems. Manage project tasks, allocate daily responsibilities, and ensure timely delivery of project milestones. Participate in internal team discussions and client coordination meetings. Create, review, and QA/QC mechanical drawings, fabrication/shop drawings, and builder s work/spool drawings. Conduct clash detection and coordination using tools like Navisworks, BIM 360, BIMTrack, or Revizto. Perform BOQ and quantity take-offs, and contribute to drawing documentation and sheet setup. Adhere to client-specific BIM standards and ensure quality across all project deliverables. Provide technical support and feedback throughout different project phases. Required Skills & Experience: Mandatory: Proficiency in Autodesk Revit MEP and Autodesk Navisworks. Familiarity with AutoCAD is an added advantage. Working knowledge of pipe and duct sizing, pressure drop, and basic mechanical design calculations. Experience working in Common Data Environments such as BIM 360, Bluebeam, Dropbox, or ProjectWise. Hands-on experience with clash coordination tools like BIMTrack, Revizto, or BIM 360 Issues. Experience across diverse project types including residential, commercial, institutional, healthcare, transportation, and data centers. Prior experience with international projects is essential. Strong understanding of Revit modeling tools, including views, sheets, schedules, filters, and family creation. Ability to work on fabrication models, perform hanger/support modeling, and generate shop and spool drawings. Proficiency in mechanical services coordination and QA/QC review of 3D models and documentation. Knowledge of project phases and required deliverables at each stage. Soft Skills & Attributes: Strong oral and written communication skills. Ability to manage and prioritize multiple tasks in a fast-paced environment. Proactive, self-motivated, and adaptable to changing project requirements. Positive attitude with excellent teamwork and interpersonal skills. Professionalism in communication with team members, clients, and stakeholders at all levels. Qualification : B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering

Job Title: Head Resource Management Location: Pune Experience: 15 to 20 Years Job Description We are seeking an experienced and strategic Head of Resource Management to lead resource planning and allocation across our wind and solar energy projects. This leadership role is critical to ensuring efficient workforce deployment, supporting project timelines, and aligning with business goals in the renewable energy sector. Key Responsibilities 1. Resource Planning & Allocation Develop and oversee a centralized resource management system for renewable energy (wind and solar) projects. Align resource planning with project schedules, client requirements, and budget constraints. Optimize resource allocation by collaborating with cross-functional teams across engineering, operations, and site execution. 2. Team Leadership & Development Lead a team of resource planners, site coordinators, and logistics professionals. Partner with HR to drive recruitment, onboarding, training, and workforce development programs in line with Suzlon s sustainability and people-first values. Foster a culture of continuous improvement and accountability within the team. 3. Project Coordination Collaborate with Project Heads, Site Managers, and Engineering teams to accurately forecast resource needs across all project phases. Ensure the timely mobilization and demobilization of manpower and equipment at multiple project sites. Resolve on-ground resource bottlenecks to maintain smooth project execution. 4. Reporting & Analytics Monitor and report on resource utilization, efficiency, and deployment costs. Leverage data-driven insights and analytics to enhance resource planning, minimize delays, and drive operational excellence. Qualifications Bachelor s Degree in Civil, Mechanical, or Electrical Engineering 15 20 years of experience in resource or operations management, preferably within infrastructure, EPC, or renewable energy sectors Proven leadership in managing cross-functional teams across geographically dispersed sites Strong project coordination, analytical, and stakeholder management skills Working knowledge of project scheduling tools, ERP systems, and analytics dashboards is a plus Qualification : Bachelors Degree in Civil, Mechanical, or Electrical Engineering

Job Title: CM - Officer EHS (Environment, Health & Safety) Location: Pune Department: Construction Management EHS Cell Employment Type: Full-Time Experience: 5 to 8 Years Role Objective To ensure the effective implementation of Environment, Health & Safety (EHS) policies and procedures across construction, operations, and maintenance activities, promoting a safe and compliant work environment at project sites. Key Responsibilities Ensure EHS compliance across all construction, operation, and maintenance activities on assigned projects. Conduct daily safety inspections to enforce safe work practices and identify unsafe conditions. Monitor and ensure proper storage and disposal of hazardous waste in line with statutory norms. Oversee the maintenance and availability of firefighting systems and personal protective equipment (PPE). Maintain and update Material Safety Data Sheets (MSDS) for raw materials and chemicals on site. Deliver site-specific training programs for employees and contractors on: EHS regulations and compliance Safe handling of hazardous substances Proper usage of PPE Fire prevention and response Develop and maintain emergency contingency plans for the site. Issue safety alerts and communicate unsafe acts or conditions to project management promptly. Prepare and submit regular safety reports and documentation to relevant stakeholders. Design and conduct site-specific training modules and safety presentations for workers and supervisory staff. Carry out periodic audits of construction zones, labor camps, and material storage areas. Oversee health monitoring initiatives within labor camps and ensure hygienic living conditions. Ensure strict adherence to PPE protocols, display of safety signages, and compliance across all project levels and locations. Qualifications & Experience Education Mandatory: BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering Preferred Additional Certifications: Advanced Diploma in Industrial Safety Diploma in Fire & Safety Postgraduate Program in HSE Management NEBOSH General Certificate M.Tech in Safety or related field Experience 5 to 8 years of relevant EHS experience, preferably in: Real Estate Infrastructure Projects Large-Scale Construction Firms Skills & Competencies In-depth knowledge of EHS standards, safety regulations, and construction site risk mitigation Proficiency in safety audits, hazard identification, and preventive action planning Strong training and communication skills across multiple levels of workforce Proficiency in working languages: English, Hindi, and Marathi Qualification : BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering

Position: Technical Lead Hardware Designation: Assistant Manager Experience Required: 7 Years Location: Pune Role Overview: We are seeking a highly skilled and experienced Technical Lead Hardware to lead our embedded hardware development projects. The ideal candidate will be responsible for designing and developing complete electronic circuits, creating prototypes, and managing the transition from design to production. This role also involves leading and mentoring a team of hardware engineers. Key Responsibilities: Lead the hardware development efforts for embedded system projects. Design and develop end-to-end electronic circuits and schematics. Create and test prototypes and sample hardware. Oversee the hardware lifecycle from concept through to mass production. Collaborate with cross-functional teams including firmware, mechanical, and testing teams. Guide and mentor a team of hardware engineers to meet project goals and timelines. Qualifications: B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering. 7+ years of hands-on experience in hardware design and development. Strong understanding of embedded system hardware design. CDAC certification in VLSI or a related specialization is a plus. Qualification : B.E./B.Tech in Electronics, Electrical, or Computer Science Engineering

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Position: Supply Chain Senior Engineer Location: Pune Reports To: Assistant General Manager Supply Chain Educational Qualification: B.E. Mechanical / Industrial Production Experience: 4 7 years Purpose of the Role To ensure timely and efficient procurement of materials in alignment with production needs, while maintaining optimum inventory levels and driving operational excellence across the supply chain. Key Responsibilities Procurement & Inventory Management Release purchase orders and manage end-to-end procurement activities in line with ERP processes. Monitor material availability to meet production schedules while avoiding overstock and stockouts. Implement engineering changes with minimal impact on inventory, obsolescence, and scrap. Stakeholder Communication & Coordination Liaise with suppliers, service providers, and internal departments to ensure smooth material flow. Build and maintain strong, reliable supplier relationships. Escalate unresolved issues to the reporting manager in a timely manner. Compliance & Process Adherence Follow standard operating procedures (SOPs) and organizational protocols rigorously. Ensure adherence to company guidelines on sourcing processes, compliance, and ethical conduct. Key Skills & Competencies Proficient in managing A-Class procurement, including local and imported long-lead items. Strong knowledge of ERP systems and digital procurement tools. Understanding of manufacturing processes and production planning. Familiarity with supply chain principles like cycle time, lead time, JIT, Kanban, push/pull systems. Effective communication and interpersonal skills for internal and external coordination. Strong organizational and planning abilities with a problem-solving mindset. Qualification : B.E. Mechanical / Industrial Production

Technical Specialist Armoured Vehicles Location: Pune Experience: 5 10 Years Education: B.E. in Mechanical Engineering Job Summary: We are looking for a highly skilled Technical Specialist Armoured Vehicles to join our engineering team in Pune. The role involves the end-to-end design, integration, and development of armoured vehicle systems, with a focus on CAD-based design, vehicle packaging, and aggregate integration. Job Purpose: To lead the design and development of armoured vehicles, ensuring functional integration of mechanical systems and effective packaging using advanced CAD tools. Key Responsibilities: Design & Integration: Perform vehicle integration and packaging of key aggregates (powertrain, suspension, electronics, etc.) using Creo or CATIA software. Design components including armoured hulls, braking systems, pneumatics, and other critical mechanical subsystems. Ensure optimal space utilization and system compatibility within the vehicle structure. Execution & Implementation: Translate technical requirements into detailed CAD models and engineering drawings. Collaborate with cross-functional teams to ensure design feasibility and compliance with performance, safety, and protection standards. Required Skills & Competencies: Functional Skills: In-depth knowledge of vehicle packaging principles, specifically for armoured vehicle platforms Strong understanding of mechanical systems integration in defense or specialized vehicle domains Technical Skills: Proficiency in CREO and/or CATIA for 3D modeling and design documentation Familiarity with defense standards and automotive design protocols Soft Skills / Behavioral Competencies: Effective stakeholder management across engineering, manufacturing, and procurement teams Solid project management abilities to drive timelines and coordinate technical deliverables Qualification : B.E. in Mechanical Engineering

Job Title: Assembler Sustaining Engineer Location: Pune, Maharashtra, India Travel: Occasional business travel may be required About BMC At BMC, trust is more than a value it s how we operate. We are an award-winning, inclusive workplace that celebrates diversity, innovation, and the passion to give back. We believe in work-life balance, empowering individuals, and creating an environment where you feel inspired and supported every day. Your wins will be celebrated, your growth championed, and your contributions deeply valued. We enable our customers to become Autonomous Digital Enterprises ready to take on the future with confidence. The Opportunity: Join the team behind Control-M, BMC s powerful orchestration and automation platform used by the world s top organizations to automate business-critical processes from data pipelines to financial transactions. As a z/OS Assembler Specialist in our Product R&D Support team, you'll work on sustaining engineering and APAR (Authorized Program Analysis Reports) development for mainframe systems. If you're driven by solving complex challenges, collaborating globally, and making a direct impact on product stability and customer satisfaction, this role is for you. Key Responsibilities: Join a dedicated team responsible for product support and APARs development for BMC s mission-critical Mainframe (z/OS) products. Develop and maintain diagnostic tools and solutions to improve the supportability and performance of the product. Contribute to APAR development cycles with a focus on timely delivery and quality. Take ownership of technical issues and work them through to resolution. Collaborate with global teams across functions to ensure product quality meets enterprise-level expectations. Share knowledge, best practices, and mentor others to elevate team capabilities. Qualifications: Bachelor s degree in Computer Science, Engineering, or a related field. 5+ years of experience in an engineering role within a Mainframe z/OS environment. Strong programming experience in Assembler language. Proficiency with z/OS internals, including JCL, JES2/3, SMS. Ability to analyze system dumps using IPCS. Hands-on experience with SMP/E for software maintenance. Strong analytical and troubleshooting skills with customer-focused problem-solving ability. Excellent communication and collaboration skills; capable of working both independently and as part of a team. Nice to Have: Experience with Java, C, or C++ Familiarity with UNIX System Services and Language Environment on z/OS Background in an enterprise product-based company Over 6,000 employees globally, united by innovation and collaboration A culture that recognizes and celebrates your individuality Continuous learning opportunities and exposure to cutting-edge technologies A commitment to creating an inclusive and empowering workplace That s okay. We value diverse backgrounds and perspectives. If you're excited about this role and BMC, we still encourage you to apply. BMC is proud to be an equal opportunity employer. Qualification : Bachelors degree in Computer Science, Engineering, or a related field.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Description: Key Responsibilities: Working knowledge of Durability domain (theory & principles of Linear, Non-Linear, Fatigue and Vibrations) Working knowledge of vehicle durability assessment and testing Analysis model building for vehicle aggregates, BIW, suspension, trims, full Vehicle durability simulation etc. Sound knowledge mechanical engineering and automotive engineering. In-depth knowledge of vehicle Durability domain for theory, objective & subjective assessment, experimental data analysis, durability target setting, root cause analysis. In depth knowledge of vehicle subsystem / systems (e.g., Body, trims, Powertrain, Suspension, Chassis etc) for construction, operation & its dynamics. Expert in meshing and modelling software in Automotive companies or Engineering services company with hands on Durability-CAE tools. Educational Qualification: BE / B.Tech / ME / M.Tech Number of Positions: 3 Skills: ANSA & Abaqus

Designation: Design Engineer Education: Diploma in Plastic Mould Technology / Tool & Die Making from CIPET, IGTR, GTTC, NTTF, or CITD. Experience: 1-2 years of experience in Mould Design or Tool Room. Job Location: Viman Nagar, Pune Preferred Joining: December 2024 Job Responsibilities: Understand mould design concepts and processes. Design hot runner accessories and systems. Review and interpret customer mould data. Interact with customers to finalize system designs. Create 3D and 2D system designs. Deliver project files within customer timelines. Manage design revisions based on customer feedback. Schedule systems for production. Collaborate with the production team during system manufacturing. Key Requirements: Basic understanding of injection moulding machines and processes. Knowledge of mould construction and basic mould design. Understanding of plastic engineering and manufacturing processes. Familiarity with geometrical dimensions, tolerances, steel materials, and heat treatment processes. Software Skills: Proficiency in SolidWorks (or similar CAD software). Experience in 3D modelling and 2D drafting. Technical Knowledge: Mould design and tooling expertise. Working knowledge of SolidWorks. Proficiency in English (reading, writing, and communication). General computer skills. Personal Attributes: Precision, flexibility, and a problem-solving mindset. Strong communication skills, with clear and professional written and verbal English. About Oerlikon Oerlikon is a global innovation leader in surface engineering, polymer processing, and additive manufacturing. We serve key industries such as aerospace, automotive, energy, tooling, and textiles, helping our customers enhance performance, functionality, and sustainability in their products and processes. With over 11,800 employees representing 93 nationalities, Oerlikon operates in more than 38 countries and across 207 locations worldwide. We value diversity, innovation, and excellence, making us a trusted partner globally.

Job Requirements Join our Engineering team We are the leading energy technology company. We are designing, assembling, and testing the latest products to help take energy forward. We collaborate with our development teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools. Partner with the best As a Function Development Engineer for Embedded Software, you will be fully involved in design, testing and deployment of new algorithms for systems operating in challenging environments. Your will be responsible for: Development of functions for data acquisition and digital signal processing Design, modelling, and simulation of mechatronic systems & controls Design of systems- and software architecture Process optimization and automation Testing of functions and systems Specification of requirements Documentation and change management processes for new product development Fuel your passion To be successful in this role you will have: Above-average university degree in Electrical Engineering, Mechanical Engineering or similar Knowledge in at least one of the following fields: Digital signal processing Measurement and control systems Communication systems engineering Experience in modelling and simulation Skilled with Matlab / Simulink Programming skills e.g. C, C++, Python Independent, proactive, self-motivated, and able to work well as part of an interdisciplinary team Good written and verbal English skills due to an international work environment, and strong interest in working with other cultures At Baker Hughes we are always searching for great talent. While we may not have a specific job for you today, we want to know about you when we do. As actual openings become available, you may be contacted to discuss a potential opportunity.