Process Control Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Automation Engineer II Location: Pune About Rapid7 At Rapid7, we are creating a more secure digital future for all by helping organizations strengthen their security programs in the face of accelerating digital transformation. Our portfolio of industry-leading solutions empowers security professionals to manage risk and eliminate threats across the entire threat landscape from applications and cloud environments to traditional infrastructure and the dark web. Trusted by over 10,000 customers worldwide, we are committed to fostering open-source communities and driving innovation through cutting-edge research. At Rapid7, we believe in optimizing our products by leveraging the latest insights into attacker methods, arming the global security community with the tools to stay ahead of threats. Position Summary We are looking for a talented Automation Engineer to join our Enterprise Applications team. This role focuses on developing and maintaining integrations and automation solutions using Workato. As an Automation Engineer, you will work closely with Business Systems Analysts to understand requirements, collaborate with cross-functional teams, and partner with Quality Assurance Engineers to ensure that integrations and automation workflows meet business needs. You will also handle unit testing, ensure thorough documentation, and use tools like Jira and Confluence for task management and collaboration. Key Responsibilities Integration Development: Design, develop, and maintain integrations between key enterprise systems (Salesforce, NetSuite, Data Warehouses, Workato, etc.) to ensure seamless data flow and process automation across platforms. Automation Solutions: Build and implement automated workflows using Workato to streamline internal business processes, reduce manual tasks, and enhance system efficiencies across various departments. Cross-functional Collaboration: Collaborate with engineers, business teams, and QA Engineers to ensure that integration solutions align with both technical requirements and business objectives. Requirement Gathering: Partner with Business Systems Analysts to gather requirements, understand business needs, and identify opportunities for process automation and integration improvements. Unit Testing & Debugging: Perform unit testing for integrations and automation workflows, debug issues as needed, and ensure the code meets quality standards before deployment. Task Management (Jira): Use Jira to manage tasks, track user stories, and address bugs related to integrations and automation workflows. Participate in sprint planning, stand-ups, reviews, and retrospectives to ensure smooth project execution and delivery. Documentation: Create and maintain detailed documentation for all integrations, workflows, and automation processes, ensuring that all technical configurations, code, and test results are clearly documented for future reference. Support & Troubleshooting: Provide ongoing support for deployed integrations, troubleshoot issues as they arise, and implement timely fixes to maintain operational continuity. Process Improvement: Contribute to continuous improvement initiatives by identifying opportunities to enhance automation workflows, increase efficiency, and reduce errors in integration processes. Key Requirements Experience 2+ years of experience in integration and automation development with a strong focus on Workato. Proven experience building and maintaining integrations between enterprise systems like Salesforce, NetSuite, or similar platforms. Demonstrated experience working with cross-functional teams, including collaboration with Business Systems Analysts and QA Engineers. Technical Skills Expertise in using Workato for integration and automation solutions. Solid understanding of API integrations, RESTful services, and data formats such as JSON and XML. Proficiency in unit testing, debugging, and troubleshooting integration workflows. Experience using version control systems such as Git. Familiarity with other integration tools and platforms is a plus. Jira Experience Comfortable using Jira for task tracking, managing sprints, and collaborating with cross-functional teams. Communication & Problem-Solving Strong ability to communicate technical concepts to non-technical stakeholders clearly and effectively. Strong analytical and troubleshooting skills to resolve integration and automation challenges efficiently. Ability to create clear, concise, and well-organized technical documentation. Education & Nice to Have A degree in Computer Science, Information Technology, or a related field is preferred. Familiarity with Agile development methodologies and tools like Jira. Experience with cloud platforms such as AWS or GCP and their integration capabilities. Security and Compliance At Rapid7, we prioritize the security of our customers and employees. All team members are expected to uphold the highest standards of security and privacy, ensuring the protection of sensitive information and compliance with relevant regulations. Qualification : A degree in Computer Science, Information Technology or a related field is preferred

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Position Title: Director Professional Services Location: Pune Experience: 12+ years Education: BCA / MCA / BE / B.Tech (Preferably in Computer Science or Information Technology) Company: Accops Systems Pvt. Ltd. A leading provider of secure workspace access and Zero Trust-based application delivery solutions, empowering enterprises to enable secure and seamless remote work. Role Overview: Accops is seeking a seasoned Director Professional Services to lead and drive the end-to-end delivery of professional services engagements across clients and geographies. This is a leadership role requiring strong technical knowledge, project governance, customer engagement, team leadership, and strategic execution skills. The ideal candidate will combine a customer-centric approach with deep experience in IT services and virtualization technologies. Key Responsibilities: Lead and manage the delivery of professional services projects, ensuring timely, high-quality, and cost-effective execution in line with business objectives and customer expectations Oversee multi-client, multi-location project portfolios, balancing resource allocation, timelines, and budgets Implement and track key performance indicators (KPIs) to ensure delivery excellence and continuous improvement Build, mentor, and inspire a high-performing team of consultants, project managers, and technical specialists Identify skill gaps, design and execute training programs to develop internal team capabilities Act as a senior escalation point for critical customer issues, ensuring swift and effective resolution Drive stakeholder engagement, building strong relationships with customers to ensure satisfaction, retention, and future growth opportunities Collaborate cross-functionally with Sales, Presales, Customer Success, Development, and Product Management teams to ensure aligned execution Regularly assess and improve delivery methodologies, tools, and operational processes to drive efficiency, scalability, and repeatability Contribute to solution design, deployment, and configuration in line with Statements of Work (SoWs) Manage change requests in SoWs in coordination with customers and the Product Engineering team Travel to client sites as required for project execution, review meetings, and relationship management Technical Skills & Experience (Mandatory): Proven track record of managing large-scale IT service delivery and project portfolios Deep understanding of Virtualization Technologies (Accops, Citrix, Omnissa) and Zero Trust Security frameworks (e.g., IAM, ZTNA) Strong command of project governance, resource management, and budget control Ability to map complex business requirements to technical solutions Excellent communication, stakeholder management, and conflict resolution abilities Certifications such as PMP, ITIL, or similar are a strong plus Preferred Attributes: Strategic thinker with a hands-on execution mindset Passion for mentoring and developing talent Ability to thrive in a fast-paced, customer-driven environment Focused on operational excellence, process standardization, and automation Soft Skills & Behavioral Competencies: Excellent verbal and written communication skills Proactive and self-motivated Strong analytical and logical reasoning Flexible and adaptable to evolving business needs Exceptional multitasking and organizational abilities Collaborative team player with strong leadership qualities Qualification : BCA / MCA / BE / B.Tech (Preferably in Computer Science or Information Technology)

Head Service Operations Location: Pune Department: Product Management Product Employment Type: Full-Time About Entrata Founded in 2003 by visionary college students revolutionizing online rent payments, Entrata has grown into a global leader serving property owners, managers, and residents. Recognized with prestigious awards such as the Utah Business Fast 50, Silicon Slopes Hall of Fame (Software Company - 2022), and the Women Tech Council Shatter List, our all-encompassing software suite includes rent payments, insurance, leasing, maintenance, marketing, and communication tools reshaping property management worldwide. With a team of 2,200+ professionals across offices in Utah, Texas, India, Israel, and the Netherlands, Entrata blends startup agility with enterprise stability. We prioritize transparent communication, diversity of thought, bold innovation, and collective excellence to create better living experiences globally. Role Overview Entrata is seeking a seasoned and motivated Head of Service Operations (Senior Director/Vice President level) to lead and scale our India-based operational teams. Reporting directly to the Managing Director of India, this role will partner closely with India and US leadership, including R&D, Implementation, Support, and Services. Your primary responsibility will be managing current shared services teams such as Utility Operations, Professional Services/Implementation, Support, and Marketing Services while strategically expanding operational capabilities within India. The focus will be on driving cost efficiency, process optimization, operational excellence, and sustainable growth. This position demands a proven leader with extensive experience managing high-performing teams, preferably in the SaaS industry or similar fast-paced environments. Key Responsibilities Operational Leadership: Set strategic direction and provide leadership for India-based operational teams aligned with global company goals and India-specific initiatives. Team Management: Lead, mentor, and develop a diverse group of operational professionals, fostering a culture of collaboration, accountability, and continuous improvement. Shared Services Growth: Plan and execute the transition of additional operational functions to India, targeting cost efficiencies, process improvements, and service-level enhancement. Operational Excellence: Implement best practices and leverage technology to improve productivity, streamline workflows, and enhance service quality. Budget & Financial Oversight: Manage the operational budget, optimize resource allocation, and ensure maximum ROI. Cross-Functional Collaboration: Partner with leadership across India and the US including R&D, Implementation, and Support to integrate operations seamlessly. Vendor & Partner Management: Oversee vendor relationships, enforce service level agreements, and control costs effectively. Performance Monitoring: Define KPIs and metrics, regularly reporting operational performance to senior leadership. Compliance & Risk Management: Ensure adherence to relevant regulations and internal policies while proactively managing operational risks. Talent Acquisition & Development: Lead hiring efforts and talent development to build a strong, scalable operations team. Minimum Qualifications Bachelor s degree in a relevant discipline. 15+ years of progressive experience in operations management. Proven success building and leading high-performing, geographically dispersed teams. Deep understanding of shared services models and operational transition experience. Strong capability managing multiple technical and operational functions aligned to corporate objectives. Excellent cross-functional collaboration skills across global teams. Advanced analytical, problem-solving, and decision-making abilities. Outstanding communication, interpersonal, and presentation skills. Experience managing operations in a global, multi-time zone environment. Familiarity with India s business environment and regulatory landscape. Preferred Qualifications MBA or other advanced degree. SaaS industry experience. Knowledge of relevant SaaS platforms and technologies. Demonstrated success in transitioning operations to cost-effective locations. Experience in vendor management and financial reporting. Expertise in operational excellence methodologies (Lean, Six Sigma, etc.). Proven track record of scaling operations in high-growth companies. In-depth understanding of compliance standards and regulatory requirements. Lead and grow a key operational hub within a leading global proptech company. Collaborate with innovative, diverse teams across multiple continents. Influence the development of scalable, efficient operational models. Access to ongoing professional growth opportunities in a dynamic environment. Qualification : Bachelors degree in a relevant discipline

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Executive Stores Manager Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Educational Qualification: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or a related field (or equivalent experience) Job Purpose We are seeking a skilled and detail-oriented Executive Stores Manager to manage and improve warehouse operations in our construction equipment production facility. This role focuses on SAP Warehouse Management (SAP-WM), collaboration with third-party logistics (3PL) partners, warehouse layout planning, inventory optimization, and accurate documentation. The ideal candidate will play a key role in streamlining processes to ensure timely material supply and efficient warehouse performance. Key Responsibilities SAP-WM Master Data Maintenance Create and maintain accurate master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies in SAP-WM data to ensure seamless warehouse and 3PL coordination. Ensure compliance with internal standards and 3PL integration requirements. Process Improvement in SAP-WM Analyze current warehouse operations to identify inefficiencies in SAP-WM workflows. Propose, implement, and document process enhancements to boost productivity and accuracy. Collaborate with IT, warehouse operations, and 3PL teams to customize SAP-WM functionalities to evolving business needs. Warehouse Layout & Optimization Design and optimize warehouse layouts to improve space utilization and material flow. Regularly assess and update layouts to accommodate new products and changing production or 3PL requirements. PFEP (Plan for Every Part) Management Develop and maintain PFEP documentation to streamline material movement and inventory control. Coordinate with production, procurement, and 3PL partners to ensure alignment with production schedules. Record Keeping & Documentation Maintain accurate and audit-ready documentation of inventory movement, SAP-WM transactions, and 3PL logistics. Ensure regulatory compliance and adherence to company policies. Warehouse Inbound/Outbound Operations Oversee inbound (receiving, put-away) and outbound (picking, shipping) operations, ensuring timely and accurate logistics in partnership with 3PL teams. Align material flow with production timelines and customer delivery expectations. Production Line Feeding Manage just-in-time (JIT) material replenishment to production lines, reducing downtime and excess inventory. Work with 3PL and production teams to ensure consistent and timely part delivery. Required Skills & Competencies Minimum 3 years of experience in warehouse operations with a strong focus on SAP-WM. Hands-on experience in master data management and process optimization in SAP. Experience collaborating with third-party logistics (3PL) teams on inbound/outbound and delivery schedules. Proficient in PFEP creation, warehouse layout planning, and production line material flow. Strong grasp of inbound/outbound logistics, inventory control, and lean warehousing principles. Excellent problem-solving, analytical, and organizational skills. Strong interpersonal and cross-functional communication skills. Attention to accuracy in documentation, compliance, and reporting. Familiarity with construction equipment or heavy machinery production is an advantage. SAP-WM certification is a plus. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or a related field (or equivalent experience)

Position: Warehouse Specialist Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Education: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience) Job Summary We are looking for a Warehouse Specialist to join our construction equipment production warehouse team. The ideal candidate will play a key role in optimizing warehouse operations through the maintenance of SAP-Warehouse Management (SAP-WM) master data, driving continuous improvements, planning warehouse layouts, and ensuring seamless collaboration with third-party logistics (3PL) partners. This role supports production by ensuring efficient material movement and inventory control aligned with business goals. Key Responsibilities SAP-WM Master Data Management Create, update, and manage master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies and maintain data accuracy for effective coordination with internal teams and 3PL. SAP-WM Process Improvement Analyze and enhance existing SAP-WM processes to improve productivity, system performance, and 3PL integration. Document and implement optimized workflows in collaboration with IT and warehouse operations. Warehouse Layout & Space Optimization Design and revise warehouse layouts to maximize space utilization, improve material flow, and meet changing production needs. Conduct regular assessments based on inventory trends and 3PL operational requirements. PFEP (Plan for Every Part) Develop and maintain PFEP documentation to ensure efficient inventory management and line-side material delivery. Work closely with procurement, production, and logistics to align inventory plans with manufacturing schedules. Record Keeping & Documentation Maintain accurate records of inventory movement, SAP-WM transactions, and 3PL documentation. Ensure compliance with audit standards, company policies, and safety regulations. Warehouse Operations (Inbound & Outbound) Oversee receiving, put-away, picking, and dispatch operations, ensuring timely material flow. Collaborate with 3PL teams to meet customer commitments and production timelines. Production Line Material Feeding Ensure timely material replenishment to production lines based on JIT and lean principles. Coordinate closely with 3PL and production teams to prevent delays or inventory build-up. Required Skills & Competencies 3+ years of hands-on experience in warehouse operations with a focus on SAP-WM. Expertise in maintaining SAP-WM master data and leading process improvement initiatives. Strong knowledge of inbound/outbound logistics, inventory control, and production line support. Experience coordinating with third-party logistics (3PL) partners. Familiarity with PFEP generation and warehouse layout planning. Understanding of lean warehousing and JIT inventory management. Excellent record-keeping, compliance awareness, and documentation accuracy. Strong problem-solving, communication, and cross-functional collaboration skills. Experience in construction equipment or heavy machinery manufacturing is a plus. SAP-WM certification or equivalent training is preferred. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience)

Position: Senior Manager Commercial After Market Location: Pune Reporting To: Assistant General Manager Commercial Education: ICWA Experience: 6 8 years Industry Preference: Heavy Engineering / Automobile Job Purpose To drive profitability and process excellence across the After Market business vertical, including spare parts, services, AMC, FMC, and rental operations. The role involves strategic commercial analysis, business partnering, process improvement, and ensuring robust internal controls through SOPs and compliance practices. Key Responsibilities Commercial Analysis & Business Structuring Analyze and structure commercial contracts related to After Market services (spare parts, AMC, FMC, rental, etc.). Evaluate business proposals such as service contracts, machine sales, and used machine valuations considering profitability, condition, usability, and documentation accuracy. Review and monitor rental contracts for adherence and timely execution. Business Partnering & Strategy Partner with cross-functional teams (Service, Sales, Finance) to identify opportunities for revenue enhancement and cost optimization. Support sustainable growth through data-backed decision-making and risk analysis. Internal Controls & SOP Development Design, implement, and strengthen internal control mechanisms to ensure process compliance and accountability. Prepare and update Standard Operating Procedures (SOPs) in alignment with organizational best practices. Process Improvement & Automation Identify repetitive or manual processes and propose automation solutions to improve efficiency. Introduce process orientation and scalable systems for commercial tasks. MIS & Reporting Develop and maintain custom MIS reports to meet evolving business needs. Provide analytical insights to management for strategic decision-making. Analyze workshop productivity and efficiency metrics monthly to drive performance improvements. Documentation & Audit Trail Ensure all commercial calculations, contract decisions, and business proposals are documented thoroughly and systematically for audit readiness and traceability. Required Skills & Competencies Strong analytical and problem-solving abilities. Excellent verbal and written communication. Proficient in commercial documentation and financial evaluation. Effective interpersonal skills with the ability to influence stakeholders. Strong presentation and reporting skills. Collaborative, assertive, and process-driven. Proficient in planning, organizing, and multitasking. Qualification : ICWA

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Job Title: Salesforce Developer Experience: 2 - 5 years Location: Kharadi, Pune Role & Responsibilities Design, develop, test, and deploy customized Salesforce solutions to address business requirements. Develop and maintain Salesforce applications using Apex, Visualforce, Lightning Components (Aura & Lightning Web Components - LWC), and Salesforce APIs. Customize and configure Salesforce objects, fields, workflows, process builder, validation rules, and automation processes. Integrate Salesforce with third-party applications and services via REST and SOAP APIs. Implement automation solutions leveraging Salesforce Flows, Triggers, and other declarative tools. Optimize existing Salesforce applications for improved performance, scalability, and user experience. Collaborate with business analysts, stakeholders, and cross-functional teams to gather and translate business needs into technical solutions. Ensure platform security, compliance, and adherence to Salesforce best practices. Troubleshoot and resolve technical issues within Salesforce environments promptly. Stay current with Salesforce platform updates, new features, and industry best practices. Required Skills & Qualifications 2 to 5 years of hands-on Salesforce development experience. Proficient in Apex, Visualforce, Lightning Web Components (LWC), and Aura Components. Strong understanding of Salesforce Object Model, SOQL, SOSL, and Governor Limits. Experience with Salesforce automation tools including Workflows, Process Builder, Flow, and Approval Processes. Hands-on experience with Salesforce integrations using REST/SOAP APIs, Web Services, and middleware like MuleSoft is a plus. Familiarity with Salesforce security models, including Profiles, Permission Sets, and Sharing Rules. Experience with CI/CD pipelines and version control tools such as Git, Bitbucket, Jenkins for Salesforce development. Knowledge of Agile methodologies and tools like Jira or Trello. Salesforce Developer certifications (PD1, PD2) are advantageous. Strong analytical, problem-solving, and communication skills.

Job Title: Python Developer Location: Pune Experience: 2+ Years Job Type: Full-Time Job Summary: We are seeking a highly motivated and skilled Python Developer to join our development team in Pune. As a Python Developer, you will play a key role in back-end development and the overall software development process. You will work on creating and optimizing web applications, integrating with databases, and collaborating with a team of engineers to deliver high-quality software solutions. The ideal candidate should have a strong understanding of object-oriented programming (OOP), web development frameworks, and solid experience with databases. If you're passionate about Python, back-end development, and problem-solving, we would love to hear from you. Key Responsibilities: Back-End Development: Design and develop robust back-end systems using Python, ensuring high performance, reliability, and scalability. Web Application Development: Collaborate with front-end developers to integrate back-end services with web applications. Database Management: Design and maintain databases, write efficient SQL queries, and manage data integration and storage. Code Quality: Write clean, maintainable, and efficient code while adhering to best practices and industry standards. Troubleshooting & Debugging: Analyze and resolve issues related to performance, bugs, and data inconsistencies. Team Collaboration: Work closely with cross-functional teams including front-end developers, UI/UX designers, and product managers to ensure a seamless product experience. Optimization & Testing: Optimize application performance and write unit and integration tests to ensure code quality and reliability. Continuous Learning: Stay up-to-date with the latest Python development tools, frameworks, and best practices. Skills & Qualifications: Educational Background: Bachelor's degree in Computer Science, Engineering, or a related field. Experience: Minimum 2 years of professional experience in Python development. Programming Skills: Strong proficiency in Python and a deep understanding of Object-Oriented Programming (OOP). Frameworks & Tools: Experience with Python web frameworks like Django, Flask, or FastAPI. Databases: Hands-on experience working with databases such as MySQL, PostgreSQL, or MongoDB. Strong knowledge of SQL and NoSQL databases. Problem-Solving: Strong analytical and problem-solving skills with the ability to troubleshoot and optimize code. Version Control: Proficient with Git or other version control systems. Collaboration: Ability to work in a collaborative team environment and communicate effectively with team members. Development Practices: Familiarity with Agile development methodologies and code review processes. What We Offer: Growth Opportunities: Opportunities for professional development and growth within the company. Collaborative Environment: Work in a team-oriented environment where knowledge sharing and collaboration are encouraged. Challenging Projects: Work on innovative and complex projects that will enhance your problem-solving and technical skills. Competitive Compensation: Competitive salary and benefits package. Work-Life Balance: A healthy work-life balance with flexible working hours. If you're passionate about Python development, back-end systems, and working with a talented team, we encourage you to apply for this exciting opportunity! Qualification : Bachelor's degree in Computer Science, Engineering, or a related field.

JOB DESCRIPTION Job Purpose This position is open with Bajaj Finance Ltd. Duties and Responsibilities Review of design & implementation of Operational Risk Management (ORM) framework. Review of design, implement and Testing (TOD/TOE) of Internal Control over Financial Reporting (ICOFR) framework. Conceptualization, documentation & implementation - Financial Control Chart Framework. Preparation of Risk Control Matrix (RCM) & Process, Flow Chart for Finance & Treasury processes. Ensure that risks are appropriately identified, documented and reported in compliance with laws, regulations and internal policies and standards. Back testing of Completeness of control environment from Trial Balance, periodic Monitoring & Testing of Controls. Timely release of reports for executives, senior management & key stakeholders. Collaborate with cross functional heads & intern department verticals to implement an effective Operational Risk Management Framework (ORMF) within Finance function to ensure operational risks and controls are being managed appropriately in a proactive& disciplined manner to meet external/ internal requirements. Perform testing and validation on control gap remediation efforts, once the remediation action plan has been reported as implemented through the RCP. Follow-up on open issues & exceptions for remediation & closure. First point of contact for Statutory Auditors to satisfy ICOFR related queries. Project Management Run and / or Support various Risk and Control projects. Work with business units to enable them to deploy solutions. Automate ORM & FCC framework - Tool/ system evaluation and implementation. Demonstrate tangible benefits of Finance Control Chart. Required Qualifications and Experience CA with 5-6 years of experience. Worked in Audit/ORM/Finance role in BFSI or worked in consulting firms in Risk Advisory department. Hands on experience of Finance, Internal Audit, ORM, IFC or SOX. Excellent communication, presentation and persuading skills. Proficient knowledge of MS Office (Excel, PowerPoint) and ERP s, Lending Systems. Project management skills. Should have managed team. Qualification : CA with 5-6 years of experience.

JOB DESCRIPTION Job Purpose This position is open with Bajaj Finance Ltd. Duties and Responsibilities Review of all GST returns (GSTR-1, GSTR 3B, GSTR-6, etc) and ensure that should be filed within due date. To ensure that correct payment of taxes should happen within due date. Review and ensure that GST credit should be reconciled and there should not be loss of GST credit. Prepare revenue reconciliation with GST returns to ensure correct reporting of all income stream while filing GST returns. Review and monitor asset procurement/ sale and ensure correct GST accounting. Ensure the proper controls are in place to mitigate error in accounting of GST liability or credit while booking income or expenses. Reviewing agreement with customers/ vendors so that same should secure interest of company wrt to GST. Provide impact analysis of GST on existing/ new business process. Provide update on changes in the GST laws/ provision and making suitable changes in the system/ process/ documentation. Work closely with consultants wherever need any advice or provide them appropriate details. Prepare and provide appropriate reply to the notices received from GST authorities and submission of required details on timely basis. Preparation of appeal papers/ stay application and filing thereof wherever necessary. Handel and provide appropriate reply to the queries received from department. Proactive in putting system/ process control to avoid corrective action at last movement. Review and file GSTR-9 and GSTR-9C within due date. Required Qualifications and Experience Candidate should be Chartered Accountant. Candidate should have work experience of 2-3 years in Indirect tax regime. Candidate who has experience in Banking Industry would be prepared.