Process Engineering Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Java Architect Integration Engineering Location: Pune Team: Integration Engineering About Anchanto Anchanto is a global SaaS technology company that powers eCommerce automation and logistics solutions for enterprises and 3PLs. Our Integration Engineering team develops scalable, high-performance integrations connecting our products with marketplaces, ERPs, WMS, OMS, and other enterprise systems across the globe. We are looking for a seasoned Java Architect to lead the design, development, and delivery of our integration framework, guide engineering best practices, and define the technical vision for integrations that serve businesses worldwide. As a key driver of innovation, you will also champion the adoption of AI tools to enhance productivity, code quality, and development processes. The Role As a Java Architect Integration Engineering, you will: Define integration architecture standards, design patterns, and development best practices to ensure scalable and robust solutions. Lead the end-to-end design and development of integrations with a variety of internal and external systems, utilizing Spring Boot and modern Java frameworks. Collaborate closely with customers to understand their integration requirements, business processes, and objectives. Work with the solution team to document and finalize integration designs, architecture, and data mappings. Champion AI-driven development practices by integrating tools like Cursor AI and other AI-assisted coding solutions into the team s workflow. Partner with Product Management, Pre-Sales, and Implementation teams to translate business needs into actionable technical designs. Guide and mentor engineers, fostering a culture of technical excellence, innovation, and AI adoption within the integration team. Play a hands-on role in building Proof-of-Concepts (POCs), solving complex integration challenges, and driving mission-critical deliveries. Collaborate with leadership to define the roadmap for integration products and platform capabilities. Key Responsibilities Architect and oversee the implementation of integration solutions, leveraging Spring Boot, REST APIs, messaging systems, and event-driven architectures. Define and enforce integration design patterns (e.g., EAI, ESB, SOA, pub/sub, ETL) to ensure reusability, scalability, and maintainability. Lead technical discovery sessions with customers to understand integration requirements and create clear, actionable solution blueprints. Collaborate with internal solution architects, product managers, and customer success teams to ensure integration feasibility and alignment with business objectives. Introduce and evaluate AI-powered development tools, integrating solutions like Cursor AI, GitHub Copilot, and others into the engineering process to improve efficiency, code quality, and documentation. Promote a culture of AI-first problem solving in architecture design, code reviews, and automation within the team. Establish frameworks and automation to accelerate the onboarding of new integrations. Evaluate and recommend technologies, tools, and cloud services (primarily AWS) to optimize integration performance and scalability. Review solution designs and code to ensure adherence to architectural principles and coding standards. Support pre-sales activities with architecture diagrams, integration approaches, and technical feasibility assessments. Lead technical discussions with external partners, vendors, and enterprise customers to ensure alignment on integration strategies and solutions. Required Skills & Experience 15+ years of software development experience, with at least 3+ years as an Architect. Strong hands-on expertise in Java (Java 8+), Spring Boot, and microservices architecture. Solid understanding of integration patterns, enterprise architecture, and middleware solutions. Experience with REST APIs, messaging systems (Kafka, RabbitMQ), and data transformation (e.g., JSON, XML, CSV). Proficiency with AWS cloud services relevant to integration, such as API Gateway, Lambda, SQS/SNS, ECS, RDS, etc. Familiarity with CI/CD pipelines, Git workflows, branching/merging strategies, and code quality tools. Linux proficiency and experience with shell scripting. Experience building connectors/adapters for ERP, WMS, OMS, CRM, or eCommerce platforms is a plus. Exposure to integration tools such as TIBCO, Informatica, SnapLogic, WebMethods, or MuleSoft is advantageous. Strong problem-solving skills, with the ability to think out-of-the-box and adapt to evolving priorities. Excellent communication and leadership skills, with the ability to influence teams across functions. Bonus / Good to Have Experience in AI-assisted development, especially using tools like Cursor AI, GitHub Copilot, Tabnine, or similar. Familiarity with prompt engineering and integrating AI APIs (e.g., OpenAI, Anthropic) into developer tooling or backend services. Understanding of ML Ops principles and how AI models can be integrated into enterprise applications. A proven track record of evangelizing AI adoption in engineering teams to enhance productivity and foster innovation. Work on global integration projects for a leading SaaS platform serving top-tier retailers, brands, and logistics companies. Lead impactful projects utilizing cutting-edge Java, Spring Boot, AWS, and AI-driven development tools. Collaborate with a globally distributed product and engineering team in an innovation-driven environment. Contribute to the future of Anchanto s integration platform, shaping scalable and robust solutions for enterprises worldwide.

Lead Salesforce Engineer Location: Pune About Rapid7 Rapid7 is a publicly traded cybersecurity company headquartered in Boston, MA, with 17 offices around the world. As we expand our global footprint into India, we are excited to grow our internal Application Engineering team. As a Salesforce Engineer, you will work alongside a global team to deliver best-in-class Salesforce solutions that meet business needs and optimize user experiences. You will have hands-on experience with Sales Cloud, Service Cloud, Experience Cloud, and CPQ, and you ll be proficient in both declarative configurations and advanced Apex coding. This is a unique opportunity to be one of the first hires for Rapid7 in India as we support our growth strategy in a culture that encourages innovation and continuous learning. About the Role As a Salesforce Engineer, you will design, develop, and support Salesforce solutions on Sales and Service Clouds. Working closely with other Salesforce team members, application owners, IT departments, and business stakeholders, you will deliver solutions that meet both technical and business requirements. Key Responsibilities Salesforce Administration: Manage and configure Salesforce environments, including Sales Cloud, Service Cloud, and Experience Cloud. Oversee system health, user permissions, profiles, workflows, and security settings. Implement and maintain changes using declarative tools such as Process Builder, Flow, and Validation Rules. Apex Development: Write and maintain Apex classes, triggers, Visualforce pages, and Lightning Web Components (LWC). Collaborate with senior developers and architects to design scalable solutions. Troubleshoot, optimize, and debug Apex code to ensure performance and stability. Unit Testing: Develop and maintain unit tests for custom Apex code, ensuring test coverage aligns with Salesforce best practices. Conduct comprehensive testing of code changes and strive for zero defects while optimizing test performance. CPQ (Configure, Price, Quote): Configure and manage Salesforce CPQ features, including price books, quote templates, products, and pricing rules. Troubleshoot CPQ-related issues and provide support for streamlining the quoting process. Collaboration and Support: Work with business analysts and other team members to gather requirements and deliver solutions. Maintain comprehensive documentation for configurations, workflows, code, and other technical solutions. Release Management: Utilize Gearset for deployment and release management, ensuring smooth Salesforce code and configuration deployments across multiple environments. Plan, execute, and document deployment processes, ensuring error-free releases through automated validation and rollback strategies. Jira Integration and Task Management: Use Jira for task management, project tracking, and collaborating on development sprints. SOX Controls & Change Management: Adhere to SOX controls to ensure compliance with IT regulations and auditing standards. Follow change management policies and procedures for implementing configurations, scripts, and integrations, ensuring all changes are properly tested, documented, and approved. Skills and Qualifications Experience & Certifications 8+ years of hands-on experience with Salesforce Sales Cloud, Service Cloud, Experience Cloud, and CPQ. Salesforce Certifications (ADM 201, ADM 211, Platform Developer I and II) are highly desirable. Strong experience with Salesforce integrations, APIs, and external systems. Experience using Jira for task and project management in an Agile environment. Hands-on experience with Gearset for deployment and release management in Salesforce. Technical Skills Expertise in Apex, Visualforce, Lightning Web Components (LWC), SOQL, and SOSL. Strong knowledge of Salesforce CPQ features and pricing rule configuration. Ability to write efficient, scalable unit tests for custom Apex code. Familiarity with Git and version control practices. Soft Skills & Attributes Strong analytical and problem-solving skills. Excellent communication skills, with the ability to work remotely with a global team. Detail-oriented with the ability to manage multiple tasks concurrently. Preferred Qualifications Experience working with global teams, especially in an Agile framework. Knowledge of Salesforce integrations (e.g., REST, SOAP APIs) and third-party tool integrations. Experience with Salesforce Data Loader, Change Sets, and Salesforce DX. Security and Compliance At Rapid7, we prioritize security and privacy. All employees are expected to adhere to the highest standards of security, ensuring the protection of sensitive information and compliance with applicable regulations.

Manager, Software Engineer - Python Location: Pune About Rapid7 & The Team Rapid7 is a leading cybersecurity company committed to creating a secure digital world for over 10,000 global customers. The **Vulnerability Coverage Team** is integral to this mission, delivering **timely and accurate vulnerability content** for products like **InsightVM** and **InsightCloudSec**. The team specializes in technologies including **Python**, Java, Ruby, AWS, and Kubernetes, ensuring customers receive monthly updates and immediate coverage against emerging threats. About the Role As the **Manager, Software Engineering**, you will be responsible for leading the Vulnerability Coverage Team. Your primary focus will be on **driving operational excellence**, ensuring the reliable delivery of high-quality vulnerability content, and managing the team's contribution to products that keep customers protected. You will serve as a key link between engineering and product strategy. Key Responsibilities Team Management & Mentorship: **Lead, coach, and mentor** Software Engineers, providing guidance, setting clear expectations, and fostering a culture of continuous learning and growth. Identify and support **career development opportunities** for team members. Project Management: **Manage and prioritize high-impact projects**, ensuring the timely delivery of vulnerability content and related initiatives. [Image of Agile Software Development Workflow] Coordinate cross-functional projects, including **risk assessment** and communicating progress to leadership. Collaboration: Work closely with **Product Management, UX, and Engineering teams** to align roadmaps, prioritize new coverage, and strategically address customer pain points. Ensure cohesive execution of initiatives across different organizational units. Quality & Process Improvement: Maintain a sharp focus on **quality and operational excellence**. Continuously drive improvements to **testing, monitoring, and alerting** processes to ensure content accuracy and reliability. Emerging Threat Coverage: Lead the team's effort to respond **quickly to emerging vulnerabilities** and provide immediate coverage. Oversee the development of **automation pipelines** to streamline content delivery and vulnerability response processes. Skills & Experience Leadership & Management **2-3 years of experience managing software engineering teams**, with a strong track record in developing and mentoring engineers. Proven experience in **scoping work, prioritizing tasks, and managing multiple high-impact projects**. Technical Expertise Strong foundation in **software engineering** with the ability to read design documents and review code. **Python proficiency** is highly desirable, with knowledge of related technologies (e.g., **AWS, Kubernetes**) being a plus. Domain & Soft Skills A strong focus on **understanding customer needs** and translating feedback into actionable engineering requirements. Excellent **cross-functional communication skills** for working with Product Management, UX, and other Engineering teams. Preferred Qualifications Familiarity with the **security landscape**, including vulnerability management and response to emerging threats. Experience with security tools like **InsightVM or InsightCloudSec**. BEng, BSc, or related degree in a technical field. Drive innovation on cutting-edge security solutions that **impact customers globally**. Play a pivotal role in solving some of the world s toughest **cybersecurity challenges**. Thrive in a culture of collaboration, continuous learning, and improvement.

Job Title: Engineering Manager Software Location: Pune Experience: 12+ Years Education: B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering Job Summary We are seeking an experienced Engineering Manager Software to lead our embedded and application software development team. The ideal candidate will have deep technical expertise in software architecture, strong leadership capabilities, and a proven track record of delivering high-quality embedded solutions. You will drive new product development, process adherence, project execution, and team development while ensuring innovation, scalability, and customer satisfaction. Key Responsibilities 1. New Product Development Collaborate with Product Management to define software specifications and finalize GATE sign-offs. Lead the design and development of scalable and modular software architectures. Benchmark competitor products to identify differentiation opportunities. Implement latest technology trends and best practices. Ensure timely and high-quality software releases in coordination with engineering and operations teams. Drive automation in testing for operational efficiency. Review and approve design documentation, validation plans, and test reports. 2. Design Process & Standards Ensure adherence to NPD (New Product Development) process up to mass production. Enforce software coding standards, quality assurance, and documentation protocols. Set up and run structured design and code review mechanisms. Foster a culture of technical excellence, innovation, and continuous improvement. 3. Project Management Create detailed project plans and communicate timelines, milestones, and risks to all stakeholders. Track progress, manage scope, and ensure projects are delivered on time and within budget. Define and monitor project costs and resource allocations. Work with Product Management to develop product roadmaps and promotional content. Proactively identify risks and implement mitigation strategies. 4. People Management Define skill matrices and identify training needs for the software engineering team. Provide mentorship, coaching, and career development for team members. Conduct regular performance reviews with actionable feedback. Foster an open, collaborative, and engaging team culture that promotes knowledge sharing and innovation. 5. Customer Support & Technical Documentation Support application and service teams in resolving customer issues and technical queries. Provide inputs for product manuals, sample applications, and user documentation. Key Skills & Competencies Technical Skills Embedded systems software architecture Expertise in C/C++, .NET, or relevant programming platforms Familiarity with product life cycle management and design standards Strong understanding of test automation, validation, and release processes Exposure to modern DevOps tools and Agile methodologies Leadership & Managerial Skills Strategic planning and project execution Risk assessment and mitigation Strong communication and stakeholder management Talent development, mentoring, and team leadership Cross-functional collaboration and decision-making Performance Indicators On-time project delivery (Schedule Performance Index) Code quality and design defect rates Budget adherence and cost optimization Team engagement and retention metrics Customer issue resolution time Knowledge sharing and innovation contributions Lead a high-performing team at the forefront of embedded and intelligent system development. Work on impactful products with real-world applications across industries. Enjoy a collaborative culture with continuous learning, innovation, and career growth opportunities. Qualification : B.E./B.Tech or M.E./M.Tech/M.Sc. in Electronics, Instrumentation, or Electrical Engineering

Position Title: Director Professional Services Location: Pune Experience: 12+ years Education: BCA / MCA / BE / B.Tech (Preferably in Computer Science or Information Technology) Company: Accops Systems Pvt. Ltd. A leading provider of secure workspace access and Zero Trust-based application delivery solutions, empowering enterprises to enable secure and seamless remote work. Role Overview: Accops is seeking a seasoned Director Professional Services to lead and drive the end-to-end delivery of professional services engagements across clients and geographies. This is a leadership role requiring strong technical knowledge, project governance, customer engagement, team leadership, and strategic execution skills. The ideal candidate will combine a customer-centric approach with deep experience in IT services and virtualization technologies. Key Responsibilities: Lead and manage the delivery of professional services projects, ensuring timely, high-quality, and cost-effective execution in line with business objectives and customer expectations Oversee multi-client, multi-location project portfolios, balancing resource allocation, timelines, and budgets Implement and track key performance indicators (KPIs) to ensure delivery excellence and continuous improvement Build, mentor, and inspire a high-performing team of consultants, project managers, and technical specialists Identify skill gaps, design and execute training programs to develop internal team capabilities Act as a senior escalation point for critical customer issues, ensuring swift and effective resolution Drive stakeholder engagement, building strong relationships with customers to ensure satisfaction, retention, and future growth opportunities Collaborate cross-functionally with Sales, Presales, Customer Success, Development, and Product Management teams to ensure aligned execution Regularly assess and improve delivery methodologies, tools, and operational processes to drive efficiency, scalability, and repeatability Contribute to solution design, deployment, and configuration in line with Statements of Work (SoWs) Manage change requests in SoWs in coordination with customers and the Product Engineering team Travel to client sites as required for project execution, review meetings, and relationship management Technical Skills & Experience (Mandatory): Proven track record of managing large-scale IT service delivery and project portfolios Deep understanding of Virtualization Technologies (Accops, Citrix, Omnissa) and Zero Trust Security frameworks (e.g., IAM, ZTNA) Strong command of project governance, resource management, and budget control Ability to map complex business requirements to technical solutions Excellent communication, stakeholder management, and conflict resolution abilities Certifications such as PMP, ITIL, or similar are a strong plus Preferred Attributes: Strategic thinker with a hands-on execution mindset Passion for mentoring and developing talent Ability to thrive in a fast-paced, customer-driven environment Focused on operational excellence, process standardization, and automation Soft Skills & Behavioral Competencies: Excellent verbal and written communication skills Proactive and self-motivated Strong analytical and logical reasoning Flexible and adaptable to evolving business needs Exceptional multitasking and organizational abilities Collaborative team player with strong leadership qualities Qualification : BCA / MCA / BE / B.Tech (Preferably in Computer Science or Information Technology)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Position: Senior Manager Commercial After Market Location: Pune Reporting To: Assistant General Manager Commercial Education: ICWA Experience: 6 8 years Industry Preference: Heavy Engineering / Automobile Job Purpose To drive profitability and process excellence across the After Market business vertical, including spare parts, services, AMC, FMC, and rental operations. The role involves strategic commercial analysis, business partnering, process improvement, and ensuring robust internal controls through SOPs and compliance practices. Key Responsibilities Commercial Analysis & Business Structuring Analyze and structure commercial contracts related to After Market services (spare parts, AMC, FMC, rental, etc.). Evaluate business proposals such as service contracts, machine sales, and used machine valuations considering profitability, condition, usability, and documentation accuracy. Review and monitor rental contracts for adherence and timely execution. Business Partnering & Strategy Partner with cross-functional teams (Service, Sales, Finance) to identify opportunities for revenue enhancement and cost optimization. Support sustainable growth through data-backed decision-making and risk analysis. Internal Controls & SOP Development Design, implement, and strengthen internal control mechanisms to ensure process compliance and accountability. Prepare and update Standard Operating Procedures (SOPs) in alignment with organizational best practices. Process Improvement & Automation Identify repetitive or manual processes and propose automation solutions to improve efficiency. Introduce process orientation and scalable systems for commercial tasks. MIS & Reporting Develop and maintain custom MIS reports to meet evolving business needs. Provide analytical insights to management for strategic decision-making. Analyze workshop productivity and efficiency metrics monthly to drive performance improvements. Documentation & Audit Trail Ensure all commercial calculations, contract decisions, and business proposals are documented thoroughly and systematically for audit readiness and traceability. Required Skills & Competencies Strong analytical and problem-solving abilities. Excellent verbal and written communication. Proficient in commercial documentation and financial evaluation. Effective interpersonal skills with the ability to influence stakeholders. Strong presentation and reporting skills. Collaborative, assertive, and process-driven. Proficient in planning, organizing, and multitasking. Qualification : ICWA

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Job Title: Technical Assistant to CMD Location: Pune Experience: Minimum 8 Years Employment Type: Full-Time Reporting To: Chairman & Managing Director (CMD) Job Responsibilities: Technical Support & Project Coordination: Assist CMD in reviewing and analyzing project reports, construction plans, and feasibility studies Coordinate with project teams, architects, and consultants for technical discussions and status updates Provide insights on project planning, estimation, and budgeting Planning & Estimation: Conduct quantity estimation, cost analysis, and material requirements for ongoing projects Assist in tendering processes, vendor negotiations, and contract evaluations Track and report on project progress, risks, and deviations Liaison & Documentation: Maintain and organize technical documents, approvals, and compliance reports Liaise with government authorities for regulatory clearances and compliance Prepare technical presentations and reports for CMD s strategic meetings Process Improvement & Risk Mitigation: Identify potential risks in construction projects and suggest mitigation strategies Support CMD s decision-making with data analysis and project insights Recommend process improvements for efficient project execution Qualifications: BE/DCE in Civil Engineering (preferably with specialization in Planning/Estimation) Experience: Minimum 4 years in construction planning, estimation, and project coordination Qualification : BE/DCE in Civil Engineering (preferably with specialization in Planning/Estimation)

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.

Data Engineer - Media & Advertising Sector - Job Description We are looking for an experienced Data Engineer to join our team and drive business outcomes in the media and advertising sector. In this role, you will leverage advanced data technologies to design and implement comprehensive data strategies that focus on scalability, performance optimization, and secure data management. Successful candidates will have hands-on experience with Big Data technologies and machine learning models, as well as a deep understanding of the advertising domain and its data needs. Technical and Professional Requirements: Big Data Technologies: Proficiency with platforms such as BigQuery, Big Data, Hadoop, and Snowflake for managing and processing large-scale datasets. Programming/Scripting Languages: Strong experience in programming languages like Python, Java, or Go for developing data solutions. Machine Learning Models: Hands-on experience defining and implementing various Machine Learning models to address diverse business requirements. Data Scalability & Performance: Practical experience in handling performance and data scalability challenges to ensure efficient data processing and storage. Advertising Domain Knowledge: Familiarity with advertising data and experience working with datasets such as Campaign Performance, Ad Performance, Attribution, and Audience Data. Job Responsibilities: Data Strategy Design: Develop a comprehensive data strategy that aligns with business objectives. This includes designing data models, establishing database development standards, and managing data warehouses and data analytics systems. Data Source Identification: Identify internal and external data sources and create a plan for managing these data sources according to the overall business data strategy. Cross-Functional Collaboration: Work with various teams (engineering, product, analytics, etc.) to ensure the smooth functioning of the enterprise data system, facilitating cross-departmental cooperation. End-to-End Data Architecture: Manage the end-to-end data architecture process, from selecting the platform and designing technical architecture to developing applications, and finally testing and implementing the solution. Big Data Solution Planning: Plan and execute big data solutions using technologies like BigQuery, Big Data, Hadoop, and Snowflake. Data Accessibility & Security: Integrate technical functionality that ensures data accessibility, accuracy, and security throughout the data lifecycle. Educational Requirements: Any Graduate with 60% and above in your academic background. This position is ideal for someone who is passionate about data engineering and eager to tackle complex challenges in the media and advertising sector. If you're looking to drive innovation, work with cutting-edge technologies, and collaborate across teams, we would love to hear from you! Qualification : Any Graduate with 60% and above in your academic background.

Role Summary Product Design Engineer (Refrigerator Design) As a Product Design Engineer at Whirlpool, you will lead the design and development of parts for refrigerator products, focusing on plastics, sheet metal, and associated processes. You will leverage your expertise to drive the product lifecycle, from conceptualization to successful market delivery, ensuring that designs are manufacturable, reliable, and meet stringent safety standards. This role involves managing multiple projects, applying technical tools, and ensuring comprehensive project execution in a global engineering team environment. Educational Qualifications B.Tech in Mechanical Engineering or M.Tech in Design Engineering. Experience: B.E: 15-18 years M.Tech: 12-15 years Technical Expertise Design & Engineering: Proficiency in plastics and sheet metal design, specifically for refrigerator products. Solid understanding of engineering principles, including design for assembly, reliability, manufacturability, and safety. Expert in GD&T (Geometric Dimensioning & Tolerancing), design standards, and variation analysis. Strong skills in conceptualization, analytical thinking, and project planning/management. Ability to interpret simulation/test results to validate and improve designs. Project Management & Methodologies: Demonstrated ability to manage multiple projects simultaneously. Proficient in using APQP, OPEX/Six Sigma methodologies, and Lean tools for process improvement. Expertise in project planning, scope management, and risk management. Experience with tools like Concept Selection Matrix, DFMEA, Tolerance Stack-Ups, DVP, etc. Strong communication (written and verbal) and presentation skills. Managerial Expertise Global Team Experience: Exposure to working within a global engineering team, collaborating across diverse cultures and regions. Leadership Skills: Ability to coach, mentor, and direct engineers in subgroups, fostering an environment of growth and innovation. Flexibility & Adaptability: Skilled in adapting to fast-changing business needs and project priorities. Structured & Self-Organized: Ability to stay organized and structured in a dynamic, fast-paced work environment. Key Responsibilities Design and Documentation: Lead the design and release of product/subsystem/module/component designs and drawings as per project timelines and targets. Develop Design Validation & Verification Reports (Lab requests, Prototyping requests, Simulation requests). Document design guides, key suppliers, subsystem roadmaps, and ensure IP creation with an innovation-driven approach. Project Management: Drive projects using established product development processes across cross-functional teams. Manage project scope, schedule, and risk management to ensure execution aligns with agreed plans and cost targets. Lead and own cross-functional projects, coordinating with internal and external stakeholders. Develop and implement best practices for project management and work package management techniques. Technical Application & Tools: Apply Six Sigma tools (Certified Green/Black Belt), RCA, 8D, A3, DFMEA, and APQP methodologies. Utilize CAD tools (Creo 4.0/6.0), PLM Software (Windchill), and GD&T for tolerance stack-up analysis and design for variation. Conduct Value Analysis/Value Engineering (VAVE) and apply techniques to optimize designs and reduce costs. Additional Skills and Qualifications Certifications: PMP certification or equivalent project management training. Proven track record in leading product development projects, ensuring successful product integration across functions. In-depth experience working with global technology centers, vendors, manufacturing, and procurement teams to implement projects in production. At Whirlpool, you ll have the opportunity to work on innovative products that impact lives around the world. We value diversity and are committed to fostering an inclusive and supportive work environment where all employees are empowered to thrive.

Technical Lead - Product and Platform Engineering (Finance) About the Role: We are seeking a highly motivated and experienced Technical Lead to join our Product and Platform Engineering team within the Finance domain. This role requires 6-10 years of experience and a strong background in leading the development of Angular-based solutions, integrating them with Spring Boot, Kafka, and microservices. The ideal candidate will provide technical leadership, mentor junior engineers, drive best practices in Angular development, manage project timelines and resources, troubleshoot technical challenges, and optimize Angular applications for performance and usability. Staying current with industry trends is essential for enhancing our product offerings. Responsibilities: Lead the product and platform engineering team in developing and implementing Angular-based solutions using JavaScript, TypeScript, and AngularJS. Oversee the design and architecture of Angular applications, ensuring high performance and scalability. Collaborate with cross-functional teams to integrate the Angular front-end with Spring Boot back-end, Kafka messaging system, and microservices architecture. Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and excellence. Drive best practices in Angular development, including code reviews, testing, and documentation. Lead the implementation of responsive and user-friendly interfaces using HTML, CSS, and JavaScript. Manage project timelines, deliverables, and resources effectively to meet business objectives. Troubleshoot and resolve technical challenges in Angular and related technologies. Own the product and platform engineering roadmap, aligning it with organizational strategic goals. Drive continuous improvement and optimization of Angular applications, ensuring they meet performance, security, and usability standards. Stay updated on industry trends and technologies to enhance product and platform offerings. Qualifications: Bachelor of Technology (B.Tech) or Bachelor of Engineering (B.E) in Computer Science or Information Technology, or Master of Technology (M.Tech) in Software Engineering or Computer Science. 6-10 years of extensive experience in Angular development, including Angular 15 and AngularJS. Demonstrated advanced proficiency in Angular, leveraging TypeScript for robust front-end development and integration. Foundational skills in JavaScript. Intermediate to advanced expertise in Angular and TypeScript for creating scalable web applications. Strong foundation in front-end technologies for responsive web applications. Experience designing and implementing complex features using Angular. Proficiency in Java for back-end services development. Expertise in Kafka for real-time data processing and event-driven architectures. Experience integrating Angular with back-end systems and microservices architecture. Preferred Qualifications: Angular Developer Certification AWS Certified Solutions Architect About Altimetrik: Altimetrik delivers outcomes for our clients by rapidly enabling digital business & culture and infusing speed and agility into enterprise technology and connected solutions. We are practitioners of end-to-end business and technology transformation. We tap into an organization s technology, people, and assets to fuel fast, meaningful results for global enterprise customers across financial services, payments, retail, automotive, healthcare, manufacturing, and other industries. Founded in 2012 and with offices across the globe, Altimetrik makes industries, leaders and Fortune 500 companies more agile, empowered and successful. Altimetrik helps companies get unstuck . We re a technology company that gives organizations a process and context to solve problems in unconventional ways. We re a catalyst for organizations talent and technology, helping teams push boundaries and challenge traditional approaches. We make delivery more bold, efficient, collaborative and even more enjoyable. Qualification : Bachelor of Technology (B.Tech) or Bachelor of Engineering (B.E) in Computer Science or Information Technology, or Master of Technology (M.Tech) in Software Engineering or Computer Science.

About Aera Technology: Aera Technology is a leading Decision Intelligence company that empowers enterprises to operate efficiently, intelligently, and sustainably. Our platform, Aera Decision Cloud , integrates with existing systems to digitize, augment, and automate decisions in real time. We help global enterprises transform their decision-making processes, delivering millions of recommendations that lead to significant revenue gains and cost savings for some of the world's best-known brands. Global Sustaining Engineering Intern We are looking for a Global Sustaining Engineering Intern to join our engineering team. In this role, you will assist in troubleshooting and resolving technical issues across our global teams, working closely with our US and India engineering teams. This internship provides an excellent opportunity to gain hands-on experience in a fast-paced, cutting-edge technology environment. Responsibilities: Issue Monitoring & Resolution: Actively monitor, track, and resolve technical issues reported by the US/global teams during their working hours. Cross-Team Coordination: Work closely with the India engineering team to troubleshoot and resolve issues efficiently, ensuring timely and effective issue resolution. Timely Reporting: Provide regular updates and reports on ongoing and completed tasks to the Lead Sustaining Engineering. Effective Communication: Ensure smooth communication between the US and India teams, facilitating knowledge transfer and problem-solving in real-time. Process Documentation: Assist in documenting debugging steps, troubleshooting techniques, and issue resolutions to build a knowledge base for future reference. About You: Education: Pursuing or recently completed a degree in Computer Science, Information Technology, or a related field. Technical Skills: Proficiency in Java, JavaScript, and React.js for full-stack development. Knowledge of SQL and database management for troubleshooting issues. Experience with version control systems (e.g., Git). Ability to debug and troubleshoot complex technical issues effectively. Additional Skills: Strong knowledge of Data Structures & Algorithms (DSA) is a plus. A solid understanding of system architecture and the software lifecycle. Strong verbal and written communication skills to collaborate with cross-functional teams. Comfortable in a fast-paced environment and adaptable to changing priorities. At Aera Technology, we offer more than just a job. You ll work alongside talented individuals from diverse backgrounds, helping build solutions that make businesses more efficient and intelligent. You ll also enjoy a variety of benefits: Comprehensive Benefits: Competitive salary, company stock options, Group Medical Insurance, Term Insurance, Accidental Insurance, paid time off, Maternity Leave, and more. Professional Development: Unlimited access to online professional courses for continuous development, along with specialized people manager programs. Work-Life Balance: A flexible working environment that helps our Aeranauts perform at their best while ensuring a healthy work-life balance. Office Perks: If you're working from the office, enjoy a fully-stocked kitchen with a variety of snacks and beverages. Location & Team: Aera Technology is headquartered in Mountain View, California, and we have global teams across multiple locations, including San Francisco, Bucharest, Cluj-Napoca, Paris, Munich, London, Pune, and Sydney. Aera Technology is an equal opportunity employer, and we welcome applicants from all backgrounds to join us in shaping the future of Decision Intelligence. If you re passionate about solving technical problems, collaborating with diverse teams, and developing your career in a growing, innovative company, we d love to hear from you!

Job Overview Staff Engineer - Product and Platform Engineering in Finance domain with 3-7 years of experience Lead design and development of user interfaces using Angular, React, and Node.js Collaborate with cross-functional teams to gather user requirements and translate them into technical specifications Implement best practices for UI development using TypeScript and JavaScript Optimize application performance with React.js 16 and Redux Stay updated with industry trends in UI development and mentor junior developers Drive continuous improvement in UI architecture and coding standards Manage project timelines and ensure successful delivery of UI components Preferred qualifications include experience in building web applications with React.js 16 and TypeScript, proficiency in JavaScript programming, and React.js 16 front-end development experience Certifications like React Developer Professional Certificate and AWS Certified Solutions Architect are preferred Bachelor of Technology (B.Tech) in Computer Science Engineering or Master of Computer Applications (MCA) is required Roles & Responsibilities Lead the design and development of user interfaces using Angular, React, and Node.js to create responsive and visually appealing web applications Collaborate with cross-functional teams to gather and understand user requirements and translate them into technical specifications Implement best practices for UI development and ensure high-quality code using TypeScript and JavaScript Optimize application performance and user experience by leveraging React.js 16 and Redux Stay updated with the latest industry trends in UI development and contribute to enhancing the platform's user interface Mentor junior developers and provide technical guidance on UI design and development Participate in code reviews, provide feedback, and drive continuous improvement in UI architecture and coding standards Take ownership of projects, manage timelines, and ensure successful delivery of UI components for the product and platform engineering team Our ideal candidate Extensive knowledge and experience in Angular, UI design, React with Node.js, React coding, and React Redux Advanced proficiency in Angular, UI design, React with Node.js, React coding, and React Redux technologies Angular expertise for dynamic web applications UI design skills for user-friendly interfaces Proficiency in React with Node.js for scalable and efficient applications Experience in React coding and React Redux for state management and interactive user interfaces Designing, developing, and maintaining CITI's front-end applications Bachelor of Technology (B.Tech) in Computer Science Engineering or Master of Computer Applications (MCA) required Certifications such as React Developer Professional Certificate and AWS Certified Solutions Architect preferred Company overview Altimetrik delivers outcomes for our clients by rapidly enabling digital business & culture and infuse speed and agility into enterprise technology and connected solutions. We are practitioners of end-to-end business and technology transformation. We tap into an organization s technology, people, and assets to fuel fast, meaningful results for global enterprise customers across financial services, payments, retail, automotive, healthcare, manufacturing, and other industries. Founded in 2012 and with offices across the globe, Altimetrik makes industries, leaders and Fortune 500 companies more agile, empowered and successful.Altimetrik helps get companies get unstuck . We re a technology company that lives organizations a process and context to solve problems in unconventional ways. We re a catalyst for organization s talent and technology, helping teams push boundaries and challenge traditional approaches. We make delivery more bold, efficient, collaborative and even more enjoyable. Qualification : Bachelor of Technology (B.Tech) in Computer Science Engineering or Master of Computer Applications (MCA) required