Quality Compliance Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Job Title: Engineering Manager Order Management System (OMS) Location: Pune Role Overview: As the Engineering Manager Order Management System (OMS), you will be responsible for leading the design, development, and continuous evolution of a large-scale, distributed eCommerce platform. This platform processes high transaction volumes and integrates with complex third-party systems. You will manage a full-stack engineering team, ensuring system scalability, performance, and resilience while fostering a culture of ownership, technical excellence, and collaboration. Key Responsibilities: Own the full product lifecycle: Lead the conceptualization, architecture, design, implementation, deployment, and maintenance of the OMS and its integrations. Lead and mentor a team of 10+ engineers, guiding them through technical challenges and driving both backend and frontend development efforts to successful delivery. Architect scalable, distributed systems that handle high volumes of orders, inventory updates, and third-party data exchanges across the platform. Drive eCommerce integration strategy, collaborating with various systems including marketplaces, ERPs, WMS, payment gateways, and 3PLs to ensure robust data synchronization. Take technical ownership of both backend and frontend components, from database schema and API design to UI architecture and performance optimization. Establish and enforce engineering best practices, including coding standards, CI/CD workflows, observability, and security compliance, to ensure consistency and quality across the team. Be **hands-on** when necessary actively contributing to code, reviewing critical modules, and troubleshooting complex production issues. Ensure high availability, scalability, and data integrity in every design decision, embedding performance and security into the development lifecycle. Collaborate cross-functionally with Product, QA, DevOps, and Customer Success teams to ensure alignment between technical delivery and business priorities. Recruit and develop talent within the team, conducting technical interviews and nurturing a strong engineering culture. What You ll Bring: 12+ years of software engineering experience, with at least 4 5 years of hands-on experience in Ruby on Rails (RoR) backend development. Proven success in building and scaling distributed, event-driven systems that can handle high transaction volumes and complex integrations. Strong Angular expertise: Experience leading teams to deliver rich, responsive web applications. Deep knowledge of eCommerce and OMS domain concepts, including order lifecycle, inventory management, shipments, returns, and third-party partner integrations. Expertise in PostgreSQL/MySQL: Proficiency in schema design, query optimization, and performance tuning. Familiarity with RESTful APIs, webhooks, and common integration patterns for external systems. Experience working with cloud platforms (preferably AWS) and managing CI/CD pipelines for continuous deployment and delivery. Proven experience as an Engineering Manager or Technical Lead, with a track record of mentoring engineers and managing delivery across multiple engineering modules. A passion for building reliable, secure, and performant systems that deliver measurable business impact and enhance the customer experience. Excellent communication, organizational, and problem-solving skills, with the ability to effectively manage complex technical challenges. A strong sense of ownership, self-motivation, and a growth-oriented mindset, always striving to improve processes and systems. Nice to Have: Experience with microservices, asynchronous job processing, or message queues (e.g., Sidekiq, Resque, RabbitMQ). Exposure to SaaS or multi-tenant architectures. Familiarity with containerization (e.g., Docker) and monitoring tools (e.g., Grafana, ELK, Prometheus). Understanding of API versioning, rate limiting, and data consistency patterns in large-scale distributed systems. Innovative Environment: Work on a high-impact eCommerce platform that powers complex integrations and supports millions of transactions globally. Leadership Opportunity: Lead and mentor a talented team of engineers while driving technical strategy and best practices. Career Growth: Be part of a rapidly growing company with opportunities to develop both technically and professionally in a collaborative, dynamic environment. Impactful Work: Your work will directly impact the success of a highly scalable, high-performance platform that serves leading global businesses. If you are an experienced engineering leader with a passion for building scalable and resilient systems in the eCommerce domain, we would love to hear from you!

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Process Specialist Accounts Payable (AP) Location: Pune Experience: 2 to 7 Years Job Description We are seeking a detail-oriented and process-driven Process Specialist Accounts Payable (AP) to manage end-to-end AP operations, ensure compliance with financial regulations and internal policies, and drive continuous improvement across processes. As the first point of contact for AP-related queries and escalations, you will play a critical role in maintaining vendor relationships, supporting financial reporting, and enhancing operational efficiency. Key Responsibilities Serve as the primary point of contact for all issues and escalations within Accounts Payable. Ensure that AP transactions meet defined cost, quality, and timeliness standards as outlined in SLAs. Maintain compliance with statutory requirements and company policies during all AP activities. Support implementation of best practices and process standardization across AP operations. Proactively identify and drive process improvement initiatives to optimize efficiency and accuracy. Troubleshoot and resolve AP-related issues raised by Associates or other stakeholders. Execute accounting transactions related to AP (e.g., write-offs, write-backs) as needed. Generate and consolidate MIS reports in the prescribed formats for internal stakeholders. Ensure all transactions are processed in accordance with the approved process manual and schedule of authority. Prepare timely AP schedules for submission to the General Ledger and Financial Reporting teams. Support the resolution of vendor disputes and lead reconciliation efforts. Review and approve debit/credit notes in line with internal authorization policies. Maintain and update the vendor tax master and associated tax codes. Keep senior associates and leadership updated on process bottlenecks or operational issues. Qualifications Bachelor s or Master s degree in Accounting, Finance, or related field CA / CMA / MBA (preferred from Tier I or Tier II institutions) Strong knowledge of Accounts Payable processes and accounting principles Excellent problem-solving and analytical skills Proficiency in ERP systems and MS Excel Strong communication and stakeholder management abilities Qualification : Bachelors or Masters degree in Accounting, Finance, or related field

Job Title: Process Specialist Accounts Receivable (AR) Location: Pune Experience: 2 to 7 Years Job Description We are looking for a proactive Process Specialist Accounts Receivable (AR) to manage and optimize AR processes, ensuring accuracy, compliance, and timely financial reporting. You will be the first point of contact for AR-related issues, supervise associates, and drive continuous improvements. Key Responsibilities Act as the primary contact for resolving all issues related to Accounts Receivable. Troubleshoot and resolve escalated AR problems from Process Specialists. Ensure timely preparation and submission of AR schedules (monthly/quarterly) to General Ledger and Finalization & Consolidation teams. Maintain all transactions in compliance with cost, quality, and time standards defined in SLAs. Implement best practices and uphold effective records management. Ensure accounting is performed in accordance with statutory requirements and company policies. Lead continuous process improvements and enhance AR record management. Supervise and validate AR transactions processed by Associates. Perform revenue de-recognition as applicable. Demonstrate strong understanding of sales processes and execute related F&A transactions in AR. Ensure invoices are raised promptly with acknowledged delivery challans (DC) / LR. Guarantee timely collection accounting and accurate MIS generation (Sales, Collections) for business and process heads. Review customer advance collections and provide relevant data to the GST team for tax liability assessment. Identify and implement operational and financial reporting enhancements. Ensure compliance with the approved process manual and schedule of authority. Provide regular feedback to the Process Head on process effectiveness. Identify bottlenecks and lead initiatives to remove them. Track key performance metrics and develop insightful reports. Qualifications Bachelor s or Master s degree in Commerce, Finance, or a related field Inter-CA / CWA / MBA (Finance) preferred Experience working with SAP FI and SD modules Strong analytical, problem-solving, and supervisory skills Excellent communication and stakeholder management Qualification : Bachelors or Masters degree in Commerce, Finance, or a related field

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Project Service Accountant ASP Location: Pune Employment Type: Full-Time Company: vConstruct (Construction Technology Company) About vConstruct vConstruct is a Pune-based construction technology company specializing in providing advanced construction-related services to clients in the US. Our Accounting Support for Projects (ASP) business unit delivers expert project accounting services to help construction projects thrive through precision, compliance, and timely execution. Role Overview We are looking for a detail-oriented Project Service Accountant to join our ASP team. This role involves managing accounting processes, data entry, invoice processing, and document management using construction management software. The candidate must have a solid understanding of accounting principles and the ability to communicate effectively in English, as most clients are US-based. The ideal candidate will ensure quality and diligence in delivering project accounting and para-accounting services. Key Responsibilities Review subcontractor insurance certificates and documents; update construction management software accordingly. Perform quality checks on timesheets to ensure compliance with state guidelines. Extract, review, and summarize project-related documents, invoices, and receipts from various sources. Validate and consolidate documentation for owner billing submissions. Reconcile monthly expense statements of company cardholders against receipts. Review subcontractor documentation for approval in US construction projects. Understand client/project requirements to create and maintain workflows and trackers. Post and review contracts in the system; reconcile costs by comparing budgets versus actuals and initiate corrective actions for discrepancies. Handle ad hoc client requests by analyzing, organizing, and comparing various data points to provide accurate outputs. Requirements 2-4 years of experience in accounting processes. Strong knowledge of accounting concepts and proficient English communication skills (both verbal and written). Experience in designing and implementing workflows based on client requirements, coordinating with internal and external teams. Hands-on experience with accounting-related processes. Proficiency in MS Excel and other spreadsheet tools. Familiarity with global accounting processes. Experience in project-based service industries and outsourced accounting services is a plus. General Skills and Attributes Process-oriented with the ability to connect dots and solve problems efficiently. Proactive multitasker capable of working under pressure. Collaborative team player with excellent interpersonal skills. Strong troubleshooting and issue-resolution abilities. Professional attitude with the ability to develop productive relationships internally and with clients. Commitment to high-quality project delivery despite tight constraints. Can-do attitude with a willingness to learn and contribute. Proficiency in Microsoft Office suite. Willingness to contribute to the firm s knowledge base and expertise. Education Bachelor s or Master s degree in Commerce, Business Administration, or related field. Additional certifications in accounting or management will be an advantage. Join vConstruct to be part of a dynamic, international team at the forefront of construction technology, delivering cutting-edge project support services to global clients. Grow your career in a supportive environment that values learning, innovation, and teamwork. Qualification : Bachelors or Masters degree in Commerce, Business Administration, or related field

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Job Title: Manager Estimation & Quantity Survey Location: Pune Experience: Minimum 10 Years Employment Type: Full-Time Reporting To: AGM Estimation & Quantity Survey Role Overview: The Manager Estimation & Quantity Survey leads the preparation of precise cost estimates, conducts detailed rate analyses, and ensures effective cost control throughout all project stages. This pivotal role supports budgeting, resource optimization, vendor evaluation, and successful project delivery within the approved financial framework. Key Responsibilities: 1. Estimation and Rate Analysis: Prepare and review cost estimates based on preliminary designs and specifications Conduct detailed rate analyses of construction activities and materials Ensure accurate estimation of labor, materials, equipment, and overheads Analyze vendor quotations for cost-effectiveness and market competitiveness Collaborate with Purchase and Contracts teams to gather relevant market insights 2. Standard Material Consumption Constants: Maintain and update a database of standard material consumption constants Apply these constants consistently to ensure accuracy in quantity estimation Align material usage with project specifications to optimize procurement and reduce waste 3. Budgeting and Financial Control: Develop and maintain project budgets in alignment with scope and timelines Collaborate with project management to plan and monitor budgets Track budget utilization, identify cost-saving opportunities, and perform variance analysis Submit regular financial performance reports 4. Cost Control and Risk Management: Implement systems to monitor project expenditures and control costs Identify potential overruns proactively and recommend corrective measures Monitor project scope changes and their cost implications Provide timely forecasts and insights to management 5. Quantity Surveying: Oversee quantity take-offs and measurement verification Collaborate with QS and site teams to ensure billing accuracy Ensure quantities correspond with approved drawings and project scope 6. Material Reconciliation: Conduct monthly material reconciliation comparing actual usage with estimates Identify excesses or shortages early to prevent delays Work with procurement and site teams for efficient material management Submit reconciliation reports with variance analysis to senior management 7. Reporting and Documentation: Maintain detailed documentation of estimates, budgets, and cost records Prepare cost reports comparing estimated vs actual expenditures Provide financial and resource-focused progress reports 8. Compliance and Quality Assurance: Ensure adherence to internal cost standards and industry best practices Support tender documentation with accurate cost inputs Follow quality assurance protocols in estimation and budgeting functions 9. Team Leadership and Collaboration: Mentor and guide junior estimators and quantity surveyors Foster cross-departmental collaboration with engineering, procurement, and finance teams Drive process improvements and knowledge sharing within the team Key Competencies & Skills: Expertise in cost estimation, rate analysis, and construction practices Proficiency in MS Excel, AutoCAD, and estimation software In-depth knowledge of standard material consumption constants Strong analytical, problem-solving, and communication skills Attention to detail with ability to meet tight deadlines Ability to interpret engineering drawings and technical specifications Qualifications & Experience: Diploma/Bachelor s Degree in Civil Engineering Minimum 10 years of relevant experience, preferably in premium residential projects Minimum 5 years experience with ERP systems Summary: The Manager Estimation & Quantity Survey will spearhead cost estimation and budget control efforts to ensure the commercial viability of construction projects. This role demands technical expertise, leadership, and effective coordination across multiple teams to optimize financial efficiency and project delivery success. Qualification : Diploma/Bachelors Degree in Civil Engineering

SAP Test Automation Engineer Location: Pune Experience Level: 5+ Years Job Summary: We are looking for a highly skilled SAP Test Automation Engineer to join our team in Pune. This role is focused on designing, developing, and executing robust automated test solutions to ensure the functionality, performance, and reliability of SAP applications. The ideal candidate will have strong experience with SAP test automation tools, functional SAP knowledge, and the ability to work collaboratively within cross-functional teams. Key Responsibilities: Design, develop, and maintain automated test scripts for SAP platforms using tools such as Tricentis Tosca, Worksoft Certify, UFT, or Selenium. Perform functional, regression, performance, and end-to-end testing across various SAP modules including SAP S/4HANA, ECC, Fiori, and integrated third-party systems. Collaborate with business analysts, developers, and stakeholders to gather testing requirements and define comprehensive test strategies. Identify and document bugs and issues; work with development teams to ensure timely resolution. Enhance existing automation frameworks for greater efficiency, scalability, and maintainability. Manage test data, oversee test environment setup, and monitor execution of automated test suites. Ensure compliance with testing best practices, quality standards, and regulatory requirements. Participate in agile ceremonies including sprint planning, backlog grooming, and design reviews to support test planning and automation feasibility. Mentor junior testers and share best practices in SAP testing and automation. Required Skills & Qualifications: Minimum 5 years of hands-on experience in SAP test automation. Proficiency in one or more automation tools: Tricentis Tosca, Worksoft Certify, UFT, Selenium. Solid understanding of SAP functional modules: SD, MM, FI, HR, PP, etc. Experience with test management tools such as JIRA, HP ALM, or qTest. Strong scripting skills in Python, Java, or VBScript. Experience in integrating automated tests into CI/CD pipelines in DevOps environments. Knowledge of API and SAP Web Services testing. Strong skills in problem-solving, test analysis, and test planning. Excellent communication and team collaboration abilities. Proven expertise in SAP Fiori and ECC testing, including both functional and automation testing. Experience in SAP migration or upgrade projects with a focus on data validation and reconciliation. Preferred Qualifications: SAP certification in testing or automation tools. Experience with SAP Solution Manager (SolMan) for test management and documentation. Familiarity with SAP S/4HANA Cloud and SAP Business Technology Platform (BTP).

Position: Junior Engineer Tool Design (Progressive Stamping / Press Tool) Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 2 4 years Industry: Plastic Injection Moulding & Automotive Components Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of high-precision plastic injection moulded components serving the automotive and other engineering industries. We are committed to delivering quality and innovation through continuous improvement and advanced engineering practices. Position Overview We are looking for a Junior Engineer Tool Design (Progressive Stamping) with hands-on experience in designing press tools. The ideal candidate will assist in 3D and 2D tool design, collaborate with senior designers and tool room teams, and contribute to the successful execution of tooling projects. Key Responsibilities Prepare 3D and 2D designs for press tools and progressive stamping dies. Collaborate with senior designers and the tool room team to document lessons learned from previous projects. Create detailed 2D drawings and perform cross-checks to ensure accuracy. Support root cause analysis for design-related issues and assist in implementing corrective actions. Adhere to project time plans and maintain timely documentation throughout the design phase. Follow and maintain 5S standards in the workplace. Ensure compliance with design and quality standards throughout the project lifecycle. Qualifications & Experience Diploma or BE in Mechanical Engineering. 2 4 years of experience in press tool / progressive stamping tool design. Required Skills Solid understanding of tool design principles and manufacturing processes. Proficiency in 3D and 2D CAD software (e.g., AutoCAD, SolidWorks, UG NX, or similar). Basic knowledge of design documentation and GD&T. Strong attention to detail, ability to multi-task, and meet project deadlines. Good knowledge of MS Office (Word, Excel, PowerPoint, Email, Internet). Effective communication and collaboration skills. Join RENATA to work alongside talented engineers in a fast-paced and innovation-driven environment. We support career development, offer hands-on project exposure, and foster a culture of teamwork and continuous improvement.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Job Title: Technical Project Manager Location: Pune Department: Technology About the Role We are seeking a dynamic Technical Project Manager to lead and develop skilled software engineering teams, ensuring the delivery of high-quality products that meet customer requirements and company standards. You will provide technical guidance, support design and analysis, and oversee the full software development lifecycle across multiple projects. Key Responsibilities Lead and manage the complete software development lifecycle including requirements analysis, design, development, testing, and documentation for multiple projects. Own timely delivery and maintain high code quality standards. Set clear objectives for team members aligned with overall team goals, monitor progress, and empower individuals to succeed. Collaborate with Lead Engineers to promote technical growth and balanced skill distribution within the team. Deliver training sessions and foster a culture of knowledge sharing. Ensure long-term code reusability, maintainability, and stability. Enforce compliance with code review processes and quality standards across teams. Drive initiatives to optimize processes, tools, and development approaches. Proactively identify and resolve team challenges and risks. Establish succession plans to ensure continuity and growth within the team. Adopt and promote industry best practices and standards tailored to organizational needs. Evaluate and recommend new technologies to enhance team productivity and product quality.

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations