Quality Control Technician Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Position: Senior Site Engineer Project Management Location: Pune Qualification: B.E. Civil Experience: Minimum 6 Years Job Description: We are seeking a skilled Senior Site Engineer with extensive experience in high-rise building projects and proficiency in Mivan technology to oversee site execution and ensure smooth project progress. Key Responsibilities: Manage and supervise daily site operations to ensure timely and quality execution. Plan and schedule manpower deployment efficiently to meet project deadlines. Coordinate closely with contractors and other stakeholders to facilitate seamless workflow. Monitor site activities, troubleshoot issues, and maintain adherence to safety and quality standards. Utilize expertise in high-rise construction and Mivan technology to drive project success. Qualification : B.E. Civil

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Job Title: Senior Rebar Checker Designation: Sr. Engineer Location: Pune Experience: 5 10 Years Mode: On-site Qualification: Diploma / B.E. / B.Tech in Civil Engineering Role Overview: We are looking for an experienced Senior Rebar Checker to join our on-site team in Pune. The ideal candidate will have a strong background in civil/structural engineering with expertise in rebar detailing and checking, particularly in cast-in-place reinforced concrete structures for US/Canada projects. Key Responsibilities: Review and verify rebar shop drawings and Bar Bending Schedules (BBS) for accuracy and compliance with project specifications and codes. Check RC drawings for completeness, clarity, and constructability. Ensure all reinforcement detailing aligns with structural requirements and cast-in-place reinforcement standards. Coordinate with the detailing team and provide feedback to ensure corrections are implemented effectively. Assist in resolving technical queries related to rebar design and detailing. Work closely with engineers and project stakeholders to ensure project timelines and quality standards are met. Required Skills & Experience: Strong technical understanding of reinforced concrete structures. In-depth knowledge of cast-in-place reinforcement detailing practices. Hands-on experience working on US/Canada-based rebar projects. Proficiency in RebarCAD and working knowledge of AutoCAD. Proven experience in checking RC drawings and Bar Bending Schedules (BBS) for medium to large-scale projects. Qualification : Diploma / B.E. / B.Tech in Civil Engineering

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Warehouse Specialist Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Education: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience) Job Summary We are looking for a Warehouse Specialist to join our construction equipment production warehouse team. The ideal candidate will play a key role in optimizing warehouse operations through the maintenance of SAP-Warehouse Management (SAP-WM) master data, driving continuous improvements, planning warehouse layouts, and ensuring seamless collaboration with third-party logistics (3PL) partners. This role supports production by ensuring efficient material movement and inventory control aligned with business goals. Key Responsibilities SAP-WM Master Data Management Create, update, and manage master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies and maintain data accuracy for effective coordination with internal teams and 3PL. SAP-WM Process Improvement Analyze and enhance existing SAP-WM processes to improve productivity, system performance, and 3PL integration. Document and implement optimized workflows in collaboration with IT and warehouse operations. Warehouse Layout & Space Optimization Design and revise warehouse layouts to maximize space utilization, improve material flow, and meet changing production needs. Conduct regular assessments based on inventory trends and 3PL operational requirements. PFEP (Plan for Every Part) Develop and maintain PFEP documentation to ensure efficient inventory management and line-side material delivery. Work closely with procurement, production, and logistics to align inventory plans with manufacturing schedules. Record Keeping & Documentation Maintain accurate records of inventory movement, SAP-WM transactions, and 3PL documentation. Ensure compliance with audit standards, company policies, and safety regulations. Warehouse Operations (Inbound & Outbound) Oversee receiving, put-away, picking, and dispatch operations, ensuring timely material flow. Collaborate with 3PL teams to meet customer commitments and production timelines. Production Line Material Feeding Ensure timely material replenishment to production lines based on JIT and lean principles. Coordinate closely with 3PL and production teams to prevent delays or inventory build-up. Required Skills & Competencies 3+ years of hands-on experience in warehouse operations with a focus on SAP-WM. Expertise in maintaining SAP-WM master data and leading process improvement initiatives. Strong knowledge of inbound/outbound logistics, inventory control, and production line support. Experience coordinating with third-party logistics (3PL) partners. Familiarity with PFEP generation and warehouse layout planning. Understanding of lean warehousing and JIT inventory management. Excellent record-keeping, compliance awareness, and documentation accuracy. Strong problem-solving, communication, and cross-functional collaboration skills. Experience in construction equipment or heavy machinery manufacturing is a plus. SAP-WM certification or equivalent training is preferred. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience)

Job Title: Assembler Sustaining Engineer Location: Pune, Maharashtra, India Travel: Occasional business travel may be required About BMC At BMC, trust is more than a value it s how we operate. We are an award-winning, inclusive workplace that celebrates diversity, innovation, and the passion to give back. We believe in work-life balance, empowering individuals, and creating an environment where you feel inspired and supported every day. Your wins will be celebrated, your growth championed, and your contributions deeply valued. We enable our customers to become Autonomous Digital Enterprises ready to take on the future with confidence. The Opportunity: Join the team behind Control-M, BMC s powerful orchestration and automation platform used by the world s top organizations to automate business-critical processes from data pipelines to financial transactions. As a z/OS Assembler Specialist in our Product R&D Support team, you'll work on sustaining engineering and APAR (Authorized Program Analysis Reports) development for mainframe systems. If you're driven by solving complex challenges, collaborating globally, and making a direct impact on product stability and customer satisfaction, this role is for you. Key Responsibilities: Join a dedicated team responsible for product support and APARs development for BMC s mission-critical Mainframe (z/OS) products. Develop and maintain diagnostic tools and solutions to improve the supportability and performance of the product. Contribute to APAR development cycles with a focus on timely delivery and quality. Take ownership of technical issues and work them through to resolution. Collaborate with global teams across functions to ensure product quality meets enterprise-level expectations. Share knowledge, best practices, and mentor others to elevate team capabilities. Qualifications: Bachelor s degree in Computer Science, Engineering, or a related field. 5+ years of experience in an engineering role within a Mainframe z/OS environment. Strong programming experience in Assembler language. Proficiency with z/OS internals, including JCL, JES2/3, SMS. Ability to analyze system dumps using IPCS. Hands-on experience with SMP/E for software maintenance. Strong analytical and troubleshooting skills with customer-focused problem-solving ability. Excellent communication and collaboration skills; capable of working both independently and as part of a team. Nice to Have: Experience with Java, C, or C++ Familiarity with UNIX System Services and Language Environment on z/OS Background in an enterprise product-based company Over 6,000 employees globally, united by innovation and collaboration A culture that recognizes and celebrates your individuality Continuous learning opportunities and exposure to cutting-edge technologies A commitment to creating an inclusive and empowering workplace That s okay. We value diverse backgrounds and perspectives. If you're excited about this role and BMC, we still encourage you to apply. BMC is proud to be an equal opportunity employer. Qualification : Bachelors degree in Computer Science, Engineering, or a related field.

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Production Supervisor | Pune Job Description As a Production Supervisor, you will be responsible for supervising and coordinating the activities of production staff, including inspectors, machine operators, assemblers, fabricators, and plant personnel. You will ensure efficient workflow, quality standards, and timely completion of production targets while maintaining safety and compliance. Key Responsibilities Oversee daily production activities to maintain a steady and efficient workflow. Supervise and coordinate production workers such as inspectors, machine setters, assemblers, and operators. Monitor and assess individual and team performance, identifying strengths and areas for improvement. Ensure compliance with safety standards and operational procedures. Collaborate with cross-functional teams to resolve production issues and improve processes. Maintain production schedules and meet deadlines while optimizing resource utilization. Report on production metrics and provide feedback to management. Qualifications & Requirements Minimum 3 years of experience in production supervision or related manufacturing roles. High school diploma or equivalent required; additional technical qualifications are a plus. Strong problem-solving skills with the ability to analyze processes and implement improvements. Excellent leadership and team management abilities. Good communication skills to effectively coordinate with teams and management. Ability to apply logic and reasoning to identify alternative solutions and assess performance. Work in a supportive and professional environment. Opportunity to lead and develop a skilled production team. Gain experience in process optimization and operational excellence. Competitive salary and career growth opportunities. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Production

Plant Incharge | Pune Job Description The Plant Incharge is responsible for supervising the day-to-day operations of the manufacturing plant, ensuring continuous process optimization, safety compliance, and cost-effective production. You will lead and motivate your team to achieve operational goals while maintaining high-quality standards. Key Responsibilities Plan and draft timelines for plant operations and job completion. Demonstrate equipment operation, safety protocols, and work procedures to new and existing employees. Inspect materials, products, and equipment to identify defects or malfunctions. Monitor and evaluate the performance of subordinates, providing guidance and support. Ensure production processes are cost-effective and meet quality standards. Oversee maintenance and proper functioning of all plant machinery. Drive continuous improvement initiatives to optimize efficiency and productivity. Qualifications & Requirements Minimum 3 years of experience in plant management or related industrial operations. Highly organized with excellent attention to detail. Strong ability to manage multiple tasks and priorities efficiently. Effective communication and leadership skills. Knowledge of safety standards and compliance requirements. Lead operations in a challenging and rewarding industrial environment. Collaborate with a dedicated team focused on growth and improvement. Opportunity to develop your leadership skills and contribute to plant success. Competitive salary and benefits package. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Manufacturing / Operations / Plant Management

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

About Talentica Software: Talentica Software is a specialized software development firm founded by industry veterans and IIT Bombay alumni. We excel in helping startups build innovative products by leveraging cutting-edge tools and technologies to solve real-world challenges. Over the past 21 years, we ve collaborated with over 180 startups, primarily in the US, and have contributed to numerous successful exits. In 2022, Talentica Software was recognized by Great Place to Work as one of India s Great Mid-Size Workplaces. What We re Looking For: We are seeking a meticulous and detail-oriented QA Specialist who is passionate about ensuring data quality. You will work closely with our analytics team to design and execute robust QA processes, validate data pipelines, and automate repetitive QA tasks. Your contributions will play a crucial role in delivering accurate, reliable, and high-quality solutions. If you enjoy solving problems, automating processes, and ensuring data integrity, this role is tailor-made for you! What You ll Be Doing: As a QA Specialist, your responsibilities will include: Designing and implementing comprehensive QA processes for data and analytics deliverables. Validating end-to-end data pipelines, including data sources, ETL processes, data extracts, calculations, visualizations, and application interfaces. Conducting functional, regression, performance, and tolerance-range testing across reports and data systems. Simulating end-user interactions to ensure a smooth user experience with analytics outputs. Validating application tracking functionalities, including data collection through app usage. Verifying calculations and metrics in BI tools like Tableau, Power BI, and others. Performing database validation using SQL (Oracle, BigQuery) and NoSQL (MongoDB) systems. Automating recurring QA tasks in the analytics/BI environment where possible. Identifying, documenting, and tracking data quality issues and discrepancies. Collaborating with cross-functional teams including data engineers, BI developers, and product managers to ensure high-quality analytics deliverables. To Succeed in This Role, You Should Have: Qualifications: BE/B.Tech degree from top engineering institutions such as IIT, NIT, BITS, VJTI, or equivalent. Experience: 2+ years of experience in QA, data validation, or analytics testing. Technical Skills: Hands-on experience testing in BI tools environments. Proficiency in SQL, with experience in Oracle and BigQuery (preferred). Familiarity with NoSQL databases like MongoDB (a plus). Experience with regression testing and simulating user interactions in BI tools. Bonus Points If You Have: Knowledge of scripting languages like R or Python. Experience in automation testing in analytics or BI environments. Familiarity with Databricks. Soft Skills: Strong communication skills, with the ability to collaborate effectively across teams. Ability to present complex findings to both technical and non-technical stakeholders. What You ll Find at Talentica: Innovative Culture: We focus exclusively on cutting-edge development, not routine maintenance. Our technological expertise sets us apart. Endless Learning Opportunities: This is a place to grow. You ll have access to constant learning opportunities and stay updated on the latest trends in technology. Talented Peers: Work with brilliant professionals from India s top engineering colleges (IITs, NITs, and more). Work-Life Balance: We value flexibility and offer remote work options and flexible schedules to ensure a healthy work-life balance. Great Culture: 82% of our employees recommend Talentica to their peers (according to Glassdoor). We pride ourselves on our supportive and collaborative work environment. Recognition & Rewards: We celebrate success and ensure that your contributions are recognized and appreciated. If you re passionate about ensuring data integrity, automating processes, and solving problems in a fast-paced, innovative environment, we d love to hear from you. Qualification : BE/B.Tech from IIT, NIT, BITS, VJTI, or any other top Indian engineering college.