Regulatory Quality Specialist Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Position: Documentation Specialist Location: Pune Job Type: Full-Time Industry: IT Services Experience Required: 1 3 Years Position Overview We are looking for a detail-oriented and tech-savvy Documentation Specialist to join our team in Pune. In this role, you will be responsible for creating, maintaining, and updating clear and user-friendly documentation that supports the use of our products and solutions. You ll work closely with developers, testers, and product managers to ensure our documentation is accurate, accessible, and aligned with business goals. Key Responsibilities Create and maintain a variety of documentation including user manuals, API guides, troubleshooting documents, release notes, FAQs, and online help content. Collaborate with cross-functional teams (developers, testers, product managers) to gather technical content and ensure information accuracy. Translate complex technical concepts into clear, concise, and user-friendly content for both technical and non-technical audiences. Maintain consistency in tone, style, and terminology across all documentation assets. Develop supporting visual content such as diagrams, flowcharts, and presentations. Ensure documentation is updated with every product release. Follow and implement best practices for documentation usability, structure, and accessibility. Requirements Strong written, verbal, and grammatical communication skills. Familiarity with using AI tools to enhance documentation workflows. Proficiency in Google Workspace or Microsoft Office Suite. Strong proofreading and editing skills to ensure high-quality, error-free content. Ability to work independently and collaboratively with a keen eye for detail and organization. Preferred Attributes A natural storyteller who can simplify complex information. Self-motivated and results-oriented with excellent problem-solving skills. Comfortable adapting to changing priorities and managing multiple tasks simultaneously. Experience with documentation or content management tools is a plus. Benefits Comprehensive training and mentorship to accelerate your career growth. Competitive compensation package. Health insurance coverage. A collaborative, inclusive work environment that values innovation and diversity. Opportunities for continuous learning and professional development.

Quality Manager Location: Pune Employment Type: Full Time Experience Required: 12 15 Years Job Summary We are seeking an experienced Quality Manager with 12 15 years of experience in a quality-driven environment within the machine tool or machine building industry. The ideal candidate will have at least 2 5 years of managerial experience overseeing quality departments and will be responsible for driving quality initiatives aligned with company goals. Key Responsibilities Define and implement quality strategies in alignment with the company s vision. Develop, implement, and maintain quality control processes, procedures, and policies to ensure products/services meet or exceed customer expectations. Monitor and analyze quality data to identify trends and areas for continuous improvement. Lead and mentor the quality control team, providing coaching and support as required. Collaborate with cross-functional teams to ensure quality processes align with overall business objectives. Conduct internal audits, identify gaps, and recommend corrective actions. Liaise with suppliers and vendors to ensure materials/components meet quality standards. Design and manage vendor evaluation processes and performance metrics. Maintain accurate and up-to-date quality documentation and records. Train team members on quality standards, policies, and best practices. Ensure quality control processes are integrated into new product/service development initiatives. Stay current with industry standards, best practices, and regulatory requirements. Key Skills & Requirements Bachelor s degree in engineering or a related field. Proven experience in quality management in the machine tool or machine-building sector. Knowledge of manufacturing, heat treatment, and surface treatment processes. Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and interpersonal skills. High attention to detail and commitment to quality. Proficiency in managing multiple priorities and projects. Familiarity with ISO standards and quality compliance regulations (ISO knowledge preferred). Qualification : Bachelors degree in engineering or a related field

Senior Business Support Specialist Location: Pune Department: Customer Operations Technical Support Job Type: Full-Time About Entrata Founded in 2003 by a group of innovative college students, Entrata has grown into a global leader in property management software. Our award-winning platform supports property owners, managers, and residents through a comprehensive suite of tools, including rent payments, leasing, maintenance, marketing, insurance, and communication solutions. With over 2,200 team members across the U.S., India, Israel, and the Netherlands, Entrata combines the energy of a startup with the reliability of an established enterprise. Our culture thrives on innovation, transparency, and bold thinking. We are committed to creating a better living experience for everyone, everywhere. Role Overview We are seeking a Senior Business Support Specialist to serve as a semi-technical expert for a specific product suite within our platform. This role involves in-depth technical analysis, advanced ticket resolution, proactive incident management, and strategic collaboration with product and engineering teams. You will act as an escalation point for complex issues, drive operational improvements, mentor other team members, and ensure high-quality support delivery. This position requires technical acumen, problem-solving skills, and a drive for continuous improvement. Key Responsibilities Serve as the subject matter expert and primary escalation point for complex technical issues within a product suite. Analyze incident trends and perform root cause analysis (RCA) to recommend product and process improvements. Create and maintain knowledge documentation including step-by-step resolutions, screen captures, and video tutorials. Collaborate closely with product and engineering teams to address systemic issues and influence future enhancements. Lead resolution efforts for high-impact or major incidents and coordinate cross-functional responses. Mentor and guide support team members, providing training on incident patterns and RCA best practices. Act as a strategic partner for product suite leaders, offering proactive technical guidance and insights. Uphold high support standards and take ownership of delivering excellent results. Demonstrate strong commitment to the Entrata brand through high-impact, solution-focused interactions. Required Qualifications 3+ years of hands-on experience in technical/functional support, implementation, or production support roles. Proven experience performing incident analysis and identifying opportunities for proactive improvement. Strong technical and business application understanding with a fast learning curve for new technologies. Ability to work effectively in a dynamic, matrixed environment. Exceptional communication skills with a collaborative, team-first approach. Experience in creating training resources such as video tutorials and documentation. High accountability and a goalkeeper mindset in maintaining quality and reliability. Preferred Qualifications Bachelor s degree in Information Systems, Computer Science, or related field. Excellent analytical and troubleshooting skills with a customer-first mindset. Demonstrated experience implementing proactive support interventions and scalable processes. Growth-oriented mindset with a track record of supporting high-growth organizations. Strong presentation skills to communicate insights and patterns to stakeholders. Experience working closely with product, engineering, training, and customer success teams. Nice to Have Experience supporting live services or business applications using PHP and MS SQL Server. Familiarity with enterprise-level customer support environments. Ability to use data trends to improve customer experience and product reliability. Work with a globally recognized leader in proptech Be part of a collaborative, high-impact team Opportunities for career growth and learning Dynamic work environment with a focus on innovation and excellence Qualification : Bachelors degree in Information Systems, Computer Science, or related field

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Job Title: Assembler Sustaining Engineer Location: Pune, Maharashtra, India Travel: Occasional business travel may be required About BMC At BMC, trust is more than a value it s how we operate. We are an award-winning, inclusive workplace that celebrates diversity, innovation, and the passion to give back. We believe in work-life balance, empowering individuals, and creating an environment where you feel inspired and supported every day. Your wins will be celebrated, your growth championed, and your contributions deeply valued. We enable our customers to become Autonomous Digital Enterprises ready to take on the future with confidence. The Opportunity: Join the team behind Control-M, BMC s powerful orchestration and automation platform used by the world s top organizations to automate business-critical processes from data pipelines to financial transactions. As a z/OS Assembler Specialist in our Product R&D Support team, you'll work on sustaining engineering and APAR (Authorized Program Analysis Reports) development for mainframe systems. If you're driven by solving complex challenges, collaborating globally, and making a direct impact on product stability and customer satisfaction, this role is for you. Key Responsibilities: Join a dedicated team responsible for product support and APARs development for BMC s mission-critical Mainframe (z/OS) products. Develop and maintain diagnostic tools and solutions to improve the supportability and performance of the product. Contribute to APAR development cycles with a focus on timely delivery and quality. Take ownership of technical issues and work them through to resolution. Collaborate with global teams across functions to ensure product quality meets enterprise-level expectations. Share knowledge, best practices, and mentor others to elevate team capabilities. Qualifications: Bachelor s degree in Computer Science, Engineering, or a related field. 5+ years of experience in an engineering role within a Mainframe z/OS environment. Strong programming experience in Assembler language. Proficiency with z/OS internals, including JCL, JES2/3, SMS. Ability to analyze system dumps using IPCS. Hands-on experience with SMP/E for software maintenance. Strong analytical and troubleshooting skills with customer-focused problem-solving ability. Excellent communication and collaboration skills; capable of working both independently and as part of a team. Nice to Have: Experience with Java, C, or C++ Familiarity with UNIX System Services and Language Environment on z/OS Background in an enterprise product-based company Over 6,000 employees globally, united by innovation and collaboration A culture that recognizes and celebrates your individuality Continuous learning opportunities and exposure to cutting-edge technologies A commitment to creating an inclusive and empowering workplace That s okay. We value diverse backgrounds and perspectives. If you're excited about this role and BMC, we still encourage you to apply. BMC is proud to be an equal opportunity employer. Qualification : Bachelors degree in Computer Science, Engineering, or a related field.

SAP Test Automation Engineer Location: Pune Experience Level: 5+ Years Job Summary: We are looking for a highly skilled SAP Test Automation Engineer to join our team in Pune. This role is focused on designing, developing, and executing robust automated test solutions to ensure the functionality, performance, and reliability of SAP applications. The ideal candidate will have strong experience with SAP test automation tools, functional SAP knowledge, and the ability to work collaboratively within cross-functional teams. Key Responsibilities: Design, develop, and maintain automated test scripts for SAP platforms using tools such as Tricentis Tosca, Worksoft Certify, UFT, or Selenium. Perform functional, regression, performance, and end-to-end testing across various SAP modules including SAP S/4HANA, ECC, Fiori, and integrated third-party systems. Collaborate with business analysts, developers, and stakeholders to gather testing requirements and define comprehensive test strategies. Identify and document bugs and issues; work with development teams to ensure timely resolution. Enhance existing automation frameworks for greater efficiency, scalability, and maintainability. Manage test data, oversee test environment setup, and monitor execution of automated test suites. Ensure compliance with testing best practices, quality standards, and regulatory requirements. Participate in agile ceremonies including sprint planning, backlog grooming, and design reviews to support test planning and automation feasibility. Mentor junior testers and share best practices in SAP testing and automation. Required Skills & Qualifications: Minimum 5 years of hands-on experience in SAP test automation. Proficiency in one or more automation tools: Tricentis Tosca, Worksoft Certify, UFT, Selenium. Solid understanding of SAP functional modules: SD, MM, FI, HR, PP, etc. Experience with test management tools such as JIRA, HP ALM, or qTest. Strong scripting skills in Python, Java, or VBScript. Experience in integrating automated tests into CI/CD pipelines in DevOps environments. Knowledge of API and SAP Web Services testing. Strong skills in problem-solving, test analysis, and test planning. Excellent communication and team collaboration abilities. Proven expertise in SAP Fiori and ECC testing, including both functional and automation testing. Experience in SAP migration or upgrade projects with a focus on data validation and reconciliation. Preferred Qualifications: SAP certification in testing or automation tools. Experience with SAP Solution Manager (SolMan) for test management and documentation. Familiarity with SAP S/4HANA Cloud and SAP Business Technology Platform (BTP).

About Talentica Software: Talentica Software is a specialized software development firm founded by industry veterans and IIT Bombay alumni. We excel in helping startups build innovative products by leveraging cutting-edge tools and technologies to solve real-world challenges. Over the past 21 years, we ve collaborated with over 180 startups, primarily in the US, and have contributed to numerous successful exits. In 2022, Talentica Software was recognized by Great Place to Work as one of India s Great Mid-Size Workplaces. What We re Looking For: We are seeking a meticulous and detail-oriented QA Specialist who is passionate about ensuring data quality. You will work closely with our analytics team to design and execute robust QA processes, validate data pipelines, and automate repetitive QA tasks. Your contributions will play a crucial role in delivering accurate, reliable, and high-quality solutions. If you enjoy solving problems, automating processes, and ensuring data integrity, this role is tailor-made for you! What You ll Be Doing: As a QA Specialist, your responsibilities will include: Designing and implementing comprehensive QA processes for data and analytics deliverables. Validating end-to-end data pipelines, including data sources, ETL processes, data extracts, calculations, visualizations, and application interfaces. Conducting functional, regression, performance, and tolerance-range testing across reports and data systems. Simulating end-user interactions to ensure a smooth user experience with analytics outputs. Validating application tracking functionalities, including data collection through app usage. Verifying calculations and metrics in BI tools like Tableau, Power BI, and others. Performing database validation using SQL (Oracle, BigQuery) and NoSQL (MongoDB) systems. Automating recurring QA tasks in the analytics/BI environment where possible. Identifying, documenting, and tracking data quality issues and discrepancies. Collaborating with cross-functional teams including data engineers, BI developers, and product managers to ensure high-quality analytics deliverables. To Succeed in This Role, You Should Have: Qualifications: BE/B.Tech degree from top engineering institutions such as IIT, NIT, BITS, VJTI, or equivalent. Experience: 2+ years of experience in QA, data validation, or analytics testing. Technical Skills: Hands-on experience testing in BI tools environments. Proficiency in SQL, with experience in Oracle and BigQuery (preferred). Familiarity with NoSQL databases like MongoDB (a plus). Experience with regression testing and simulating user interactions in BI tools. Bonus Points If You Have: Knowledge of scripting languages like R or Python. Experience in automation testing in analytics or BI environments. Familiarity with Databricks. Soft Skills: Strong communication skills, with the ability to collaborate effectively across teams. Ability to present complex findings to both technical and non-technical stakeholders. What You ll Find at Talentica: Innovative Culture: We focus exclusively on cutting-edge development, not routine maintenance. Our technological expertise sets us apart. Endless Learning Opportunities: This is a place to grow. You ll have access to constant learning opportunities and stay updated on the latest trends in technology. Talented Peers: Work with brilliant professionals from India s top engineering colleges (IITs, NITs, and more). Work-Life Balance: We value flexibility and offer remote work options and flexible schedules to ensure a healthy work-life balance. Great Culture: 82% of our employees recommend Talentica to their peers (according to Glassdoor). We pride ourselves on our supportive and collaborative work environment. Recognition & Rewards: We celebrate success and ensure that your contributions are recognized and appreciated. If you re passionate about ensuring data integrity, automating processes, and solving problems in a fast-paced, innovative environment, we d love to hear from you. Qualification : BE/B.Tech from IIT, NIT, BITS, VJTI, or any other top Indian engineering college.

Job Description Job Title: Electrical Designer You are a part of Hardware Engineering Group under MRI Business, located at Philips Healthcare Innovation Centre (HIC) Pune. HIC is playing a key role in Philips global strategy for Diagnostic Imaging. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards healthcare growth markets Your Role: Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications. Ensuring that the design is consistent with the higher-level architecture and requirements. Ensuring that the proposed design would have the safety, reliability and quality features built-in. Responsible for ensuring that the design meets the performance, quality and cost criteria. Conduct concept and feasibility studies. Leads the introduction of new technologies. Ensuring that there is proper documentation per standards for the developed design. Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification. Ensuring that his/her design modules meet the product certification requirements. Drawing up personal schedule and reports on progress. Defining and assessing the Work Breakdown Structure/planning/costs of his/her area. Being abreast of technical developments in own field through study of literature and technical contacts. Maintaining product and company reputation by complying with country specific regulations. Supplier evaluation and communication. You're the right fit if: Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience. Knowledge of state-of-the-art methods/tools (CAD/simulation) used in Electrical, PCB and Cable harness design. Experience in New Product Introduction (NPI), Product Life Cycle Management, Obsolescence Management/Sustenance and Value Engineering. Exposure to Analog, Mixed Signal Board Design and Power Electronics designs. Experience in 16/32-bit microcontroller-based design and interfacing. Knowledge of Cable harness design for power, analog-digital signal, Communication, RF, audio/video and fiber optics cabling. Working knowledge on the selection of electronic components, cable and connectors. Knowledge of communication interfaces like RS232, RS485, CAN, EtherCAT, Ethernet and USB. Knowledge of EMI/EMC standards and testing for conformance. Hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics). Ability to understand and debug problems across hardware/software boundaries. Should have experience in DFMEA and design of Fail-safe systems and Sub-systems. Should have good fundamental knowledge of Motors/Motor Drivers/ Position, Speed Encoders and should be able to analyze motor under different operating modes such as regenerative mode. Experience in design of a communication gateway will be an added advantage. Should have experience in design of high-speed digital interface. Knowledge of mechanical design compatibility aspects. Knowledge of IEC 60601 standards will be an added advantage. Knowledge of Embedded Software Programming will be an added advantage. Ability to understand and debug problems across hardware/software boundaries. Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage. Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc. will be an added advantage. Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent. Disciplined team worker, ability to work independently. Result oriented team player. Ability to present and articulate ideas to key stakeholders and leadership team. Excellent communication skills and Positive can do attitude. Quality mindset in design and documentation. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Qualification : Completed Engineering studies at university level; B.E. / B. Tech. / M.E. / M. Tech. in Electronics or Electrical Engineering with 8+ years of experience.

Job Description: The Senior Regulatory Specialist will develop and execute the regulatory strategy for new product development, design changes and field safety corrections for US, EU and RoW. Collaborate with the cross functional team (including R&D, design quality, marketing, supply chain etc.) to create submission contents. Lead 510(k) submission, preparation of EU MDR Technical Documentation, Health Canada license applications and other global registrations and work with global regulators/competent authorities throughout review and approval process. Supports activities required to maintain regulatory compliance as new or revised versions of standards, guidance documents are published. Monitor global regulatory landscapes and supports implementation of regulation changes and executes quality plans to minimize business impact. Provides Regulatory assessment of product changes for launch and sustaining activities. Review labelling, marketing materials, and claims substantiation evidence to maintain compliance with global requirements. Identify areas for improvement for efficiency and compliance in internal processes, work instructions, and forms and apply technical expertise to process improvement efforts. May lead or participate in process improvement teams to affect changes at a local or cross business unit level. Job Requirements/Qualifications: Minimum of 15+yrs years of experience in the medical device industry with regulatory submission experience. 510(k) submission experience preferred. Minimum of a bachelor s degree in engineering or a related scientific field. Degree within Regulatory Affairs and/or Regulatory Affairs Certification is preferred. Proficiency in understanding, interpretation, and the application of FDA 21 CFR 820 Quality System Regulations, EU MDR Regulation 2017/745, ISO 13485, and other relevant standards and regulations. Prior experience supporting/leading regulatory submissions such as 510k, EU MDR Technical Documentation and global registrations Strong written, oral, and interpersonal communication skills to be able to work in a team environment. Solution and detail oriented, well organized and self-motivated. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Qualification : Minimum of a bachelors degree in engineering or a related scientific field. Degree within Regulatory Affairs and/or Regulatory Affairs Certification is preferred.

Job Description Senior Specialist, Manufacturing Automation The Manufacturing Execution System (MES) Senior Specialist acts as a subject matter expert for PAS-X MES focusing on electronic batch records design. The primary responsibility is to ensure that the deployment of the Werum/Korber PAS-X electronic Master Batch Records are successfully and compliantly designed, developed, deployed, and supported to maximize business benefits and are in line with site business process and technical standards. The MES Senior Specialist will also be responsible for updating the Master batch records for MES integrations DCS, SAP, LIMS etc. The Senior Specialist will be supporting MES implementations, product trainings, standards development, technical development of PAS-X specialist team in India. The Sr. Specialist is responsible for following standard processes and procedures in performing their duties. These include cGMP regulations, SOPs and global business processes. The MES Sr. Specialist is responsible for activities that include the following: Identifies and implements continuous process improvement opportunities. Sustainelectronic Master Batch Records, bringing together knowledge of manufacturing processes, and standard Werum/Korber generic master batch record (GMBR) configuration. Executes the appropriate change control and electronic Master Batch Record life-cycle actions and processes to assure the MES system is in a state of control and compliance. Collaborates and assists with troubleshooting to efficiently resolve manufacturing problems, providing MES support to ongoing Electronic Batch Record (EBR) operations. Knowledge of Quality Systems and Regulatory Standards to provide assurance and foster quality decisions with project teams and their site Quality unit. Work directly with Manufacturing sites point of contacts to understand the requirements related to MBR/GMBRs and implements them following the SOPs and Life cycle procedures using electronic validation softwares like eVal (Kneat Validation Software). Manages the GMBR design needs for group of sites from a region NA, EU etc. using demand and talent planning skills. Education Minimum Requirement: Bachelor s Degree and 8+ years of MES (PAS-X) experience or 12+ years of relevant MES experience Required Experience and Skills: Direct experience with MES (PAS-X) with strong experience in MBR, GMBR design, Integrations (SAP and L2 Systems with PAS-X) . Proven track record of analytical skills, problem solving and attention to detail. Demand and Talent Planning experience while implementing MES projects, tasks. High personal integrity, credibility, and energy Excellent communication and influencing skills. Strong written and verbal communication skills Minimum five (5) years of experience in a production regulated industry. Strong understanding of manufacturing principles/processes (preferably Biologics) and ability to translate manufacturing requirements into Automation/Digital Solution Preferred Experience and Skills: Knowledge of SAP Knowledge of L2 Systems (Aveva PI Historian, SCADA, DeltaV DCS) integration with PAS-X MES Qualification : Bachelors Degree and 8+ years of MES (PAS-X) experience or 12+ years of relevant MES experience

Head Service Operations Location: Pune Department: Product Management Product Employment Type: Full-Time About Entrata Founded in 2003 by visionary college students revolutionizing online rent payments, Entrata has grown into a global leader serving property owners, managers, and residents. Recognized with prestigious awards such as the Utah Business Fast 50, Silicon Slopes Hall of Fame (Software Company - 2022), and the Women Tech Council Shatter List, our all-encompassing software suite includes rent payments, insurance, leasing, maintenance, marketing, and communication tools reshaping property management worldwide. With a team of 2,200+ professionals across offices in Utah, Texas, India, Israel, and the Netherlands, Entrata blends startup agility with enterprise stability. We prioritize transparent communication, diversity of thought, bold innovation, and collective excellence to create better living experiences globally. Role Overview Entrata is seeking a seasoned and motivated Head of Service Operations (Senior Director/Vice President level) to lead and scale our India-based operational teams. Reporting directly to the Managing Director of India, this role will partner closely with India and US leadership, including R&D, Implementation, Support, and Services. Your primary responsibility will be managing current shared services teams such as Utility Operations, Professional Services/Implementation, Support, and Marketing Services while strategically expanding operational capabilities within India. The focus will be on driving cost efficiency, process optimization, operational excellence, and sustainable growth. This position demands a proven leader with extensive experience managing high-performing teams, preferably in the SaaS industry or similar fast-paced environments. Key Responsibilities Operational Leadership: Set strategic direction and provide leadership for India-based operational teams aligned with global company goals and India-specific initiatives. Team Management: Lead, mentor, and develop a diverse group of operational professionals, fostering a culture of collaboration, accountability, and continuous improvement. Shared Services Growth: Plan and execute the transition of additional operational functions to India, targeting cost efficiencies, process improvements, and service-level enhancement. Operational Excellence: Implement best practices and leverage technology to improve productivity, streamline workflows, and enhance service quality. Budget & Financial Oversight: Manage the operational budget, optimize resource allocation, and ensure maximum ROI. Cross-Functional Collaboration: Partner with leadership across India and the US including R&D, Implementation, and Support to integrate operations seamlessly. Vendor & Partner Management: Oversee vendor relationships, enforce service level agreements, and control costs effectively. Performance Monitoring: Define KPIs and metrics, regularly reporting operational performance to senior leadership. Compliance & Risk Management: Ensure adherence to relevant regulations and internal policies while proactively managing operational risks. Talent Acquisition & Development: Lead hiring efforts and talent development to build a strong, scalable operations team. Minimum Qualifications Bachelor s degree in a relevant discipline. 15+ years of progressive experience in operations management. Proven success building and leading high-performing, geographically dispersed teams. Deep understanding of shared services models and operational transition experience. Strong capability managing multiple technical and operational functions aligned to corporate objectives. Excellent cross-functional collaboration skills across global teams. Advanced analytical, problem-solving, and decision-making abilities. Outstanding communication, interpersonal, and presentation skills. Experience managing operations in a global, multi-time zone environment. Familiarity with India s business environment and regulatory landscape. Preferred Qualifications MBA or other advanced degree. SaaS industry experience. Knowledge of relevant SaaS platforms and technologies. Demonstrated success in transitioning operations to cost-effective locations. Experience in vendor management and financial reporting. Expertise in operational excellence methodologies (Lean, Six Sigma, etc.). Proven track record of scaling operations in high-growth companies. In-depth understanding of compliance standards and regulatory requirements. Lead and grow a key operational hub within a leading global proptech company. Collaborate with innovative, diverse teams across multiple continents. Influence the development of scalable, efficient operational models. Access to ongoing professional growth opportunities in a dynamic environment. Qualification : Bachelors degree in a relevant discipline

Job Title: Process Specialist Accounts Payable (AP) Location: Pune Experience: 2 to 7 Years Job Description We are seeking a detail-oriented and process-driven Process Specialist Accounts Payable (AP) to manage end-to-end AP operations, ensure compliance with financial regulations and internal policies, and drive continuous improvement across processes. As the first point of contact for AP-related queries and escalations, you will play a critical role in maintaining vendor relationships, supporting financial reporting, and enhancing operational efficiency. Key Responsibilities Serve as the primary point of contact for all issues and escalations within Accounts Payable. Ensure that AP transactions meet defined cost, quality, and timeliness standards as outlined in SLAs. Maintain compliance with statutory requirements and company policies during all AP activities. Support implementation of best practices and process standardization across AP operations. Proactively identify and drive process improvement initiatives to optimize efficiency and accuracy. Troubleshoot and resolve AP-related issues raised by Associates or other stakeholders. Execute accounting transactions related to AP (e.g., write-offs, write-backs) as needed. Generate and consolidate MIS reports in the prescribed formats for internal stakeholders. Ensure all transactions are processed in accordance with the approved process manual and schedule of authority. Prepare timely AP schedules for submission to the General Ledger and Financial Reporting teams. Support the resolution of vendor disputes and lead reconciliation efforts. Review and approve debit/credit notes in line with internal authorization policies. Maintain and update the vendor tax master and associated tax codes. Keep senior associates and leadership updated on process bottlenecks or operational issues. Qualifications Bachelor s or Master s degree in Accounting, Finance, or related field CA / CMA / MBA (preferred from Tier I or Tier II institutions) Strong knowledge of Accounts Payable processes and accounting principles Excellent problem-solving and analytical skills Proficiency in ERP systems and MS Excel Strong communication and stakeholder management abilities Qualification : Bachelors or Masters degree in Accounting, Finance, or related field

Job Title: Process Specialist Accounts Receivable (AR) Location: Pune Experience: 2 to 7 Years Job Description We are looking for a proactive Process Specialist Accounts Receivable (AR) to manage and optimize AR processes, ensuring accuracy, compliance, and timely financial reporting. You will be the first point of contact for AR-related issues, supervise associates, and drive continuous improvements. Key Responsibilities Act as the primary contact for resolving all issues related to Accounts Receivable. Troubleshoot and resolve escalated AR problems from Process Specialists. Ensure timely preparation and submission of AR schedules (monthly/quarterly) to General Ledger and Finalization & Consolidation teams. Maintain all transactions in compliance with cost, quality, and time standards defined in SLAs. Implement best practices and uphold effective records management. Ensure accounting is performed in accordance with statutory requirements and company policies. Lead continuous process improvements and enhance AR record management. Supervise and validate AR transactions processed by Associates. Perform revenue de-recognition as applicable. Demonstrate strong understanding of sales processes and execute related F&A transactions in AR. Ensure invoices are raised promptly with acknowledged delivery challans (DC) / LR. Guarantee timely collection accounting and accurate MIS generation (Sales, Collections) for business and process heads. Review customer advance collections and provide relevant data to the GST team for tax liability assessment. Identify and implement operational and financial reporting enhancements. Ensure compliance with the approved process manual and schedule of authority. Provide regular feedback to the Process Head on process effectiveness. Identify bottlenecks and lead initiatives to remove them. Track key performance metrics and develop insightful reports. Qualifications Bachelor s or Master s degree in Commerce, Finance, or a related field Inter-CA / CWA / MBA (Finance) preferred Experience working with SAP FI and SD modules Strong analytical, problem-solving, and supervisory skills Excellent communication and stakeholder management Qualification : Bachelors or Masters degree in Commerce, Finance, or a related field

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Position: Chief of Medical Services Location: Pune Experience: 10 15 Years (including 5+ years in a leadership role) Qualification: Mandatory: MBBS/MD Preferred: MHA / MPH / MBA in Healthcare Management License: Valid medical license and board certification About the Role We are seeking an accomplished and dynamic Chief of Medical Services to lead and oversee the clinical governance, medical operations, and quality of care across the hospital. This strategic role requires a senior medical professional with a proven track record in leadership, regulatory compliance, and operational excellence. As a key member of the leadership team, you will ensure that all medical services meet the highest standards of care, safety, ethics, and efficiency. Key Responsibilities Provide clinical leadership to guide the planning, implementation, and improvement of medical services Oversee adherence to hospital policies, protocols, and ethical practices across all clinical departments Lead the review and analysis of sentinel and adverse events to ensure continuous quality improvement Manage medical manpower planning, including recruitment, credentialing, and budgeting for consultants and junior doctors based on occupancy and hospital needs Collaborate with administrative and support departments to ensure timely execution of contracts, payments, and medical service-related processes Ensure all clinical services are delivered in line with the organization s standards, protocols, and regulatory guidelines (e.g., NABH, JCI) Conduct daily administrative rounds, engage in patient and family counselling, and address medical grievances effectively Supervise and enforce proper documentation, storage, and management of medical records in line with retention and medico-legal policies Ensure timely and accurate medico-legal documentation and follow-ups Monitor and drive statutory and regulatory compliance across all medical departments Required Skills & Competencies Strong clinical acumen backed by MBBS/MD qualification Proven leadership and team management capabilities in a healthcare setting Expertise in strategic planning, decision-making, and hospital administration In-depth knowledge of regulatory standards (e.g., NABH, JCI, MCI, statutory norms) Excellent interpersonal and communication skills for effective collaboration and conflict resolution Ability to lead multidisciplinary teams and ensure a patient-centric approach to care Eligibility Criteria MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred 10 15 years of clinical experience, including 5+ years in a senior healthcare management or leadership role Valid medical registration and board certification Qualification : MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred

Position: Specialist, Patient Experience Location: Pune, Maharashtra, India Our Mission: Healthcare should work for patients but often it doesn t. At Zocdoc, we re changing that by giving power to the patient. We ve built the leading healthcare marketplace across all 50 states, enabling patients to find and book in-person or virtual care with ease. By empowering patients with choice and transparency, we aim to raise quality and lower costs in healthcare. Your Impact: As a Patient Experience Specialist, you ll create magical moments that connect patients to Zocdoc s mission. Your proactive problem-solving and empathetic approach will ensure a seamless, supportive experience for patients navigating healthcare. You ll thrive in a collaborative culture, delivering top-tier customer service that inspires continued trust and advocacy. You ll Enjoy This Role If You Are: A natural optimist with empathy and enthusiasm for solving problems and building genuine customer connections. A team player who thrives in a collaborative and fun environment. Driven to deliver outstanding customer service experiences that make a lasting positive impression. Adaptable and eager to learn new techniques and systems. Day-to-Day Responsibilities: Support patients via chat, email, and phone to ensure a smooth Zocdoc experience. Multitask by managing multiple patient requests simultaneously. Use problem-solving skills to answer questions and help patients secure needed appointments. What Success Looks Like: Demonstrating initiative, resourcefulness, and attention to detail with a strong sense of ownership. Communicating clearly and effectively, thriving in both independent and team settings. Delivering top-notch customer service (service industry experience a plus). Quickly adapting and excelling in a fast-paced environment. Sharing a passion for improving lives through technology. Benefits: Join a smart, supportive, and mission-driven team. Competitive compensation and medical insurance. Daycare/creche facility for kids. Corporate wellness programs including Headspace. Cellphone and Wi-Fi reimbursement. Competitive parental leave. Annual sponsored health checkups. Sabbatical leave for employees with over 5 years at Zocdoc. About Zocdoc: Zocdoc is the nation s leading digital health marketplace, helping millions of patients find, compare, and book care easily. Founded in 2007 with a mission to empower patients, Zocdoc is committed to diversity, equity, and inclusion, building a collaborative team that reflects the communities we serve. We are proud to be an equal opportunity employer.

Position: Technical Support Specialist Location: Pune, Maharashtra, India Shift: Night shift, 6 PM 3 AM IST (On-site at Koregaon Park office, 5 days a week) Our Mission: Healthcare should be seamless for patients. Zocdoc empowers patients by offering an easy-to-use marketplace for booking in-person or virtual healthcare across the U.S., improving quality and affordability. Your Impact on Our Mission: As a Technical Support Specialist, you ll be the go-to expert providing timely, effective technical support to Zocdoc employees both remotely and onsite. You ll help maintain IT service quality, troubleshoot issues, and support hardware and software needs, ensuring smooth day-to-day operations. What You ll Do Daily: Provide first- and second-level technical support for network issues (LAN, WAN, Wi-Fi, VPN). Monitor and troubleshoot network devices and connectivity, escalating complex problems as needed. Support PC/Mac desktop issues, hardware repairs, and software applications. Assist with IT operational tasks like desk setups, inventory audits, and meeting room configurations. Manage systems administration for core IT services, including SaaS tools and process automation. Handle onboarding/offboarding workflows including machine imaging and account configuration. Maintain detailed documentation for IT systems and processes. Communicate promptly and clearly throughout ticket resolution to meet SLAs and ensure high user satisfaction. What You ll Need to Succeed: Bachelor s degree in Computer Science or relevant IT certifications and experience. 2+ years in technical support/helpdesk roles. Strong customer service skills and problem-solving mindset. Experience with Google Workspace admin, AzureAD, Intune, JAMF/JSS Suite. Hands-on troubleshooting skills for Windows and Mac environments. Knowledge of Windows Server, Active Directory, LDAP, DHCP, SSO, MFA. Familiarity with tools like Jira, Confluence, Slack, Bettercloud. Basic scripting skills (BASH, PowerShell, or similar). Benefits: Competitive salary and medical insurance. Perks including daily catered lunch, Ping Pong, daycare reimbursement. Wellness programs like Headspace and BetterLYF counseling. Cellphone and wifi reimbursement, parental leave, sabbatical after 5 years. Annual health check-ups and generous paid time off. Work with a smart, supportive team at a certified Great Place to Work. About Zocdoc: Zocdoc is the U.S. s leading digital health marketplace, connecting millions of patients with healthcare providers to improve the healthcare experience. Founded in 2007, Zocdoc emphasizes diversity, collaboration, and a mission-driven culture.

JOB DESCRIPTION Job Purpose This position is open with Bajaj Finance Ltd. Duties and Responsibilities RBI Regulatory COE: Work closely with the RBI Reporting Team to provide project management support, oversee project timelines and deliverables, and ensure compliance with regulatory requirements. Serve as the primary point of contact for the Finance Team during RBI inspections. Provide project management support to the Reporting Team, including developing project plans, tracking progress, and identifying risks and issues. Work with internal stakeholders to ensure that project deliverables are completed on time. Assist in the preparation of documentation and reports for RBI inspections. Ensure compliance with regulatory requirements and internal policies and procedures. Identify areas for process improvement and work with the Finance Team to implement changes. Act as a liaison between the Finance Team and other departments within the organization. Required Qualifications and Experience a) Qualifications CA / CA Inter having minimum of 1-2 years of experience in Banking / NBFC industry. Having strong background of accounting & financial systems. Strong understanding of RBI regulations and requirements. Excellent communication and interpersonal skills, with the ability to work collaboratively with stakeholders at all levels of the organization. Demonstrated ability to manage multiple projects simultaneously and meet deadlines. Attention to detail and a commitment to accuracy and quality. Proficiency in Microsoft Office and project management software. b) Work Experience 1 - 2 years of experience in Banking / NBFC industry. c) Skills Keywords RBI Inspection, PMO, NBFC, Banking, Finance Qualification : CA / CA Inter having minimum of 1-2 years of experience in Banking / NBFC industry.