Safety Procedures Jobs in Mumbai

Designation: Senior Engineer Location: Mumbai Department: R&D Qualification: B.Tech / B.E in Electronics / Electronics & Communication / Electronics & Telecommunication Experience: 5+ years (exclusively in Electronics Design & Development) Required Skills & Expertise Practical hands-on experience with: Operational Amplifiers (OpAmp) and their applications. DC-DC converters, Low Dropout Regulators (LDOs), thermal calculations, and heatsink selection. Relays and their applications. Diodes, MOSFETs, BJTs, Optocouplers and their real-world usage. Protection devices such as MOV and TVS. Microcontrollers and pin mapping. Communication protocols including CAN, SPI, I2C, Parallel, RS232, RS485, Ethernet, USB. Switch Mode Power Supply (SMPS) design and PCB layout guidelines. EMI/EMC design and testing. Job Description & Responsibilities The candidate will own the product development lifecycle from initial specification through design, validation, and final production, including documentation at every stage: Design & Development Design and implement low-power analog circuits (op-amps, filters, power circuits, BJTs, FETs) and digital circuits (logic gates, microcontrollers, memories). Draft specifications, plan design architecture, create circuit schematics, select components, prepare BOMs, and coordinate procurement. Simulation & Analysis Perform circuit tolerance analysis using Excel, Spice-based Monte-Carlo simulations, TINA, or equivalent tools. Compliance & Standards Design and develop products compliant with hazardous location standards and railway safety standards (IEC, EN, UL, CE), focusing on intrinsic safety, functional safety, and EMI/EMC requirements. Testing & Validation Bring up PCB assemblies and develop low-level hardware test plans to verify design functionality. Debug hardware using oscilloscopes, digital multimeters (DMMs), logic analyzers, and other test equipment. Generate detailed test plans and reports for electrical and environmental compliance tests. Production Support Assist in prototype fabrication including procurement, build processes, and testing. Analyze and modify designs for end-of-life (EOL) considerations, manufacturing feedback, or customer issues. Documentation Document design processes, testing procedures, validation results, and create jigs or fixtures for validation purposes. Additional Expectations Collaborate effectively with cross-functional teams including manufacturing, procurement, and quality assurance. Drive continuous improvement by troubleshooting and resolving design and production issues. Ensure design practices align with company policies and industry best practices for quality and reliability. Qualification : B.Tech / B.E in Electronics / Electronics & Communication / Electronics & Telecommunication

Senior Engineer Civil Location: Mumbai Experience: 7 10 Years Qualification: Diploma / B.E. in Civil Engineering Employment Type: Full-Time About the Role We are looking for a skilled Senior Civil Engineer to join our Mumbai team. The candidate will be responsible for overseeing civil engineering projects, ensuring quality control, timely execution, and adherence to safety standards. This role involves coordination across teams, site supervision, and ensuring project specifications are met. Key Responsibilities Lead and supervise civil engineering works at the project site to ensure compliance with design, safety, and quality standards. Review and interpret construction drawings, blueprints, and specifications to guide execution. Coordinate with contractors, consultants, and clients to ensure smooth project progress. Monitor daily site activities and resolve technical issues proactively. Prepare project schedules, progress reports, and documentation. Conduct site inspections and ensure quality assurance and control procedures. Manage material procurement, vendor coordination, and resource allocation. Ensure adherence to safety protocols and regulatory compliance on site. Mentor junior engineers and site staff, fostering professional development. Assist in budgeting, cost control, and resource planning. Required Skills & Competencies Proven experience in civil engineering project execution and site management. Strong knowledge of construction methods, materials, and industry standards. Ability to read and interpret engineering drawings and technical documents. Proficient in project management and civil engineering software/tools. Strong communication, leadership, and problem-solving skills. Ability to work independently as well as in a team-oriented environment. Attention to detail and commitment to quality and safety. Preferred Attributes Experience with large-scale infrastructure, commercial, or residential projects. Familiarity with local building codes and statutory regulations. Ability to manage multiple projects simultaneously. Join Our Team If you are a dedicated civil engineer with a passion for project excellence and leadership, join us to contribute to impactful infrastructure projects in Mumbai. Apply today! Qualification : Diploma / B.E. in Civil Engineering

Quality (QA/QC) Manager Civil Projects Location: Mumbai Experience: 8 12 Years Qualification: Diploma / B.E. in Civil Engineering Employment Type: Full-Time About the Role We are looking for an experienced QA/QC Manager to oversee the quality assurance and quality control aspects of our civil engineering projects in Mumbai. The ideal candidate will ensure that all construction activities meet the required standards and specifications, driving excellence across all phases of project execution. Key Responsibilities Develop, implement, and maintain a comprehensive Quality Management System (QMS) for civil construction projects. Review and approve method statements, inspection & test plans (ITPs), and quality-related documentation submitted by contractors/subcontractors. Monitor and inspect site activities to ensure compliance with quality standards, specifications, and safety norms. Conduct regular site audits, internal inspections, and ensure all materials and workmanship conform to relevant codes and standards. Coordinate and oversee third-party testing, ensuring documentation and compliance with project requirements. Maintain and manage the Non-Conformance Reports (NCRs) and Corrective/Preventive Actions (CAPA) system. Liaise with project managers, consultants, and clients on quality-related matters and participate in regular project meetings. Ensure all QA/QC documentation is updated and archived in accordance with audit and compliance requirements. Lead the QA/QC team and mentor junior engineers to ensure a culture of quality and continuous improvement. Support HSE (Health, Safety & Environment) team in ensuring safe construction practices in line with QA/QC expectations. Required Skills & Competencies 8 12 years of experience in Quality Assurance/Quality Control within the civil construction or infrastructure industry. In-depth knowledge of civil construction practices, materials testing, and applicable codes and standards (IS Codes, BIS, ASTM, etc.). Proficient in MS Office, QA/QC documentation, and relevant construction management tools. Strong understanding of site inspection procedures, test methods, and quality control systems. Excellent communication, leadership, and analytical skills. Ability to manage multiple teams and vendors while maintaining quality standards. Preferred Attributes Experience in high-rise residential, commercial, or infrastructure projects. Certifications in quality management systems such as ISO 9001:2015 or Six Sigma will be an added advantage. Working knowledge of project management or planning tools is beneficial. Join a results-driven team that values precision, compliance, and construction excellence. As the Quality Manager, you ll play a key role in ensuring the structural integrity, safety, and success of our projects. Apply now to make quality your signature on landmark projects in Mumbai! Qualification : Diploma / B.E. in Civil Engineering

Job Title: Quality Supervisor Location: Mumbai Experience: 4 5 Years Industry: Real Estate / Construction Role Overview: We are seeking a detail-oriented and proactive Quality Supervisor to ensure that all construction activities meet the highest quality and compliance standards. The ideal candidate will oversee material verification, quality assurance processes, statutory compliance, and certification efforts in line with industry best practices and regulatory requirements. Key Responsibilities: Quality Control Conduct physical inspection of construction materials such as bricks, sand, aggregates, and fly ash bricks to ensure compliance with specified quality standards. Monitor and ensure all construction work adheres to international concrete and building standards. Regularly review safety practices at construction sites and office premises, ensuring adequate safety protocols are in place and followed. Process & Policy Implementation Implement and continuously improve quality control processes and systems across project sites. Foster a culture of quality awareness among site teams through effective communication and training. Prepare and maintain comprehensive checklists for material and structural testing; ensure strict adherence to testing protocols and documentation standards. Statutory Compliance Ensure full compliance with environmental and pollution control guidelines to avoid penalties or legal issues. Prevent the use of substandard materials or improper construction techniques that could lead to regulatory action or structural failure. Maintain accurate documentation and ensure all compliance records are up to date to meet audit and legal requirements. Proactively mitigate risks that may result in claims or damages due to quality lapses in materials or processes. Certification & Audits Support the company s efforts to obtain and maintain ISO and other relevant quality certifications. Coordinate regular internal and external quality audits, ensuring timely renewal and compliance with certification standards. Key Requirements: Diploma or Bachelor's degree in Civil Engineering or a related field. 4 5 years of hands-on experience in quality control or quality assurance in the construction or real estate sector. Strong knowledge of material testing, concrete standards, and quality audit procedures. Familiarity with environmental and safety regulations relevant to the construction industry. Proficiency in MS Office and documentation tools; ability to generate reports and maintain digital records. Excellent communication, coordination, and problem-solving skills. Qualification : Diploma or Bachelor's degree in Civil Engineering or a related field

Position: Manager Sort Centre Location: Mumbai Department: Operations About the Role: We are looking for a highly organized and performance-driven Sort Centre Manager to oversee and manage daily operations at our warehouse facility. In this role, you will be responsible for leading a team, optimizing warehouse workflows, ensuring operational excellence, and maintaining high levels of customer satisfaction. The ideal candidate has strong experience in logistics or e-commerce, especially in sort centre and automation processes. Key Responsibilities: Supervise, organize, and direct sort centre operations to ensure efficient warehouse functioning with customer satisfaction as the primary goal. Develop and implement systems for inventory management, equipment utilization, product handling, gate processes, and outbound logistics. Monitor daily operations and establish operational goals and performance standards. Lead, train, and mentor warehouse staff to troubleshoot issues and meet both short- and long-term performance targets. Plan and manage resources including workforce, equipment layout, space utilization, and workflow to ensure productivity and quality standards. Maintain safety and legal compliance by enforcing operational policies and procedures. Operational Responsibilities: Oversee key warehouse functions including inventory control, quality assurance, shipping, logistics, and floor productivity. Create and manage team schedules to meet fulfillment demands while maximizing efficiency and minimizing overtime. Conduct regular equipment inspections and coordinate maintenance as needed. Collaborate with warehouse leads to evaluate performance, identify gaps, and implement process improvements. Manage inbound and outbound logistics, coordinating with transport partners to ensure timely and cost-efficient delivery. What You Bring: 5+ years of experience in warehouse operations or logistics management. Prior experience in sort centre operations and familiarity with automation processes. Background in e-commerce or logistics preferred. Strong leadership and team management skills. Ability to manage multiple priorities in a fast-paced, deadline-driven environment. Excellent analytical, organizational, and communication skills. MBA or equivalent degree preferred. Qualification : MBA or equivalent degree preferred

Job Title: Site Office Executive Location: Mumbai About Zipgrid Zipgrid is a leading PropTech company specializing in Finance, Compliance, and Office (FCO) operations for housing societies and commercial communities on a Done-For-You model. Since 2014, Zipgrid ( MyAashiana Management Services Private Limited ) has emerged as a trusted partner to over 550+ communities, providing comprehensive solutions that ensure smooth and efficient operations. We believe in the motto, Let the experts do the work, delivering unmatched community living and working experiences backed by over a decade of expertise. Role Overview At Zipgrid, each society is treated as a unique project. As a Site Office Executive, you will be responsible for managing the day-to-day operations of the assigned project, working closely with the FCO Manager and project teams to ensure seamless administration and excellent service delivery. Key Responsibilities Assist the FCO Manager and team at the client site with daily operations. Manage office administration tasks such as document filing, scanning, and submission/collection of papers from residents and offices. Handle banking activities including cheque submissions, passbook updates, and statement collection. Process daily receipt entries and track cheque lifecycle (undeposited and post-dated cheques). Address basic resident queries and ensure regular cheque deposits. Coordinate weekly virtual meetings with project teams and assist in project coordination. Communicate with local authorities and vendors under guidance from the site/project team. Participate in mandatory training sessions as scheduled by project leads. Perform other administrative duties as assigned by Managing Committee members. Qualifications & Skills HSC passed or Graduate with 2+ years of experience; preference for candidates with office administration experience. Proficient in MS Office applications. Strong communication skills, able to clearly relay client matters to the site and project teams. Willingness to learn and support team members proactively. Detail-oriented and organized with the ability to multitask effectively. If you re looking to join a dynamic PropTech leader and grow your career by managing impactful community projects, we d love to hear from you!

Job Title: Construction Safety Manager Location: Mumbai Department: Central Safety, Health, and Environment Work Level: 2B Job Summary We are seeking an experienced Construction Safety Manager to join our team. The ideal candidate will be a subject matter expert in construction safety, with deep knowledge of safety statutes across various geographies. The role will involve developing, maintaining, and disseminating construction safety standards, conducting training, and managing safety compliance. As a key leader, you will be responsible for ensuring that the construction safety practices meet regulatory standards and for managing root cause analysis in case of safety incidents related to construction. Key Responsibilities Develop & Implement Safety Standards: Create, maintain, and disseminate comprehensive construction safety standards for the organization. Training & Education: Conduct training sessions for employees on construction safety standards and best practices to ensure proper understanding and adherence. Safety Inquiries & Issue Resolution: Act as the primary reference for construction safety-related inquiries and provide expert guidance in resolving any safety concerns. Root Cause Analysis: Lead root cause analysis for any safety incidents related to construction, and develop corrective action plans to prevent recurrence. Compliance: Ensure that construction safety operations comply with local and international construction safety statutes and regulations across various business units. Safety Audits & Inspections: Perform regular safety audits and inspections at construction sites to identify potential hazards and ensure compliance with established safety standards. Collaboration with Project Managers: Work closely with project managers and other stakeholders to integrate safety measures into ongoing construction projects. Safety Performance Tracking: Work with the SHE reporting team to track performance against safety targets, ensuring progress aligns with the company's expectations. Learning & Development: Support the development and maintenance of construction safety learning content and curricula in collaboration with the Supply Chain Academy (SCA) team. Qualifications Education: Bachelor s degree in Occupational Health and Safety, Construction Management, Engineering, or a related field. Construction Safety Expertise: In-depth knowledge of construction safety statutes and regulations across major geographies. Experience: 7-10 years of relevant experience in construction safety management, particularly in medium to large-scale construction projects like factories and warehouses with refrigeration requirements. Certifications: Preferred certifications include OSHA or NEBOSH in construction safety. Skills: Strong analytical and problem-solving skills, especially in root cause analysis. Ability to work collaboratively with diverse teams, including SHE Managers/Directors, Engineering, and Project Managers. Proficiency in MS Office tools and other relevant software. Excellent communication and training skills to effectively lead safety programs. Travel Travel as required by the job, based on project needs. Contacts SHE Managers/Directors (Global & BUs) Engineering (BG, BU, site level) Reporting and Finance Essential Skills Construction/Civil Engineering Design Knowledge: A strong working/design knowledge of construction and civil engineering. Safety Standards Development: Proven experience in developing and implementing safety standards for large-scale construction projects. Root Cause Analysis: Expertise in conducting root cause analysis for incidents and implementing corrective actions. This role is critical in maintaining the highest standards of construction safety, ensuring that safety compliance and training are up to date, and that safety risks are continuously assessed and mitigated. Qualification : Bachelors degree in Occupational Health and Safety, Construction Management, Engineering, or a related field.

Job Title: Technical Superintendent (Container/Bulk Carrier) About Us: At BSM, our strength lies in our people a team of over 20,000 seafarers and 2,000 shore-based professionals, operating across 30+ global locations and managing a fleet of 650 vessels. Together, we navigate the seas responsibly, ensuring the safety of our people, our fleet, and the environment. As a family-owned multinational business, we foster a culture of togetherness and continuous learning. With a workforce representing over 80 nationalities, our diversity fuels innovation and sets new standards in the maritime industry. Join us at BSM and become part of a team shaping the future of shipping while facilitating global trade for millions around the world. Job Objective: As a Technical Superintendent, you will be responsible for monitoring and controlling the safe, efficient, and cost-effective technical operation of your assigned vessels. This includes ensuring operational excellence while staying aligned with owner expectations and upholding environmental compliance standards. Key Responsibilities: Oversee the technical performance of assigned vessels, ensuring all equipment and machinery operate effectively. Participate in the creation and execution of maintenance and repair plans, ensuring they align with operational requirements. Monitor vessel certificates to ensure compliance with maritime legislation, safety regulations, and regulatory standards. Manage the planning, execution, and follow-up of dry-docking and major repairs. Conduct vessel visits, audits, and inspections, ensuring thorough planning, implementation, and follow-up to support fleet operational efficiency. Prepare and submit vessel visit reports accurately and promptly to vessel owners. Assess and manage requisition requests from vessels, ensuring timely delivery and quality of spares, stores, and consumables, in line with BSM Procurement Procedures. Ensure all reporting requirements related to incidents, technical updates, maintenance, repairs, operational status, docking, and budget spend are met on time with high-quality reporting standards. Review and provide feedback on senior officers' performance appraisals, ensuring fair evaluations and supporting their career development. Qualifications & Experience: Bachelor s degree in Mechanical Engineering or Marine Engineering. Minimum 3 years of sailing experience as Second Engineer/Chief Engineer on Container Vessels or Bulk Carriers. At least 3 years of shore-based experience as a Technical Superintendent in a ship management or ship-owning company (Container/Bulk). Key Skills: In-depth knowledge of vessel technical operations and voyage regulations. Strong project management capabilities. Excellent negotiation and people management skills. Team-oriented mindset with strong collaboration abilities. Strong organizational skills with attention to detail. Fluent in English with strong communication skills. Proficient in PC applications and technical tools. What We Offer: Clear career development pathways and growth opportunities. Comprehensive technical and soft skills training programs. Health insurance coverage. Annual performance bonuses. A diverse, inclusive, and collaborative work environment. Flexible work arrangements to support work-life balance. Become part of the ever-expanding Schulte Group family! Qualification : Bachelors' degree in Mechanical or Marine Engineering

Job Title: Director of Operations Health Insurance Position Summary As the Director of Operations Health Insurance, you will play a pivotal role in strengthening our presence within Travel Operations by applying your expertise in the insurance and operations domain. You will work closely with senior stakeholders to identify and evaluate strategic partnerships, create long-term business opportunities, and drive operational efficiencies across multiple projects and accounts. This position is for professionals with experience in banking, outbound sales, and insurance operations. Your primary focus will be on managing large teams, optimizing business processes, and contributing to overall company success. Key Responsibilities Leadership & Operations Management: Manage and oversee multiple projects and accounts within the insurance domain, ensuring successful execution and alignment with company goals. Lead and manage over 500 FTEs across different geographies, ensuring operational efficiency and team success. Implement and drive company-approved strategies and monitor their impact across operational activities. Align with stakeholders to set strategic goals and make key decisions that guide day-to-day operations. Provide constructive feedback and support to staff from various departments, ensuring continuous growth and high performance. Performance Evaluation & Improvement: Regularly assess and improve business procedures, aligning them with organizational objectives. Use data and metrics to evaluate performance and identify opportunities for improvement. Introduce policies and procedures to enhance overall performance and operational effectiveness. Ensure the safety and adequacy of work environments and implement necessary improvements. Client Relations & Business Development: Foster strong relationships with corporate clients and high-level decision-makers to create new business opportunities. Perform follow-ups with corporate clients and identify potential areas of growth. Contribute to the development of business strategies to approach prospects and expand market presence. Promote continuous improvement in all operational areas by proposing creative solutions. Financial & Budget Management: Review and manage operational budgets, ensuring financial objectives are met. Oversee manufacturing, purchasing, and sales departments to ensure that each division is reaching goals set by leadership. Forecast and control costs to maintain profitability. Review financial information to adjust operational budgets, supporting profitability and business growth. Collaboration & Cross-Functional Integration: Lead coordination between operations, engineering, technology, and customer service divisions to improve workflow and reduce costs. Communicate new directives, policies, and procedures to managers, ensuring clear understanding and smooth implementation. Act as a liaison between different business functions to ensure seamless operations and collaboration. Strategic Planning & Execution: Establish key metrics, guidelines, and standards to evaluate company efficiency and effectiveness. Analyze business procedures and recommend improvements to enhance operational output. Ensure that policies and procedures are followed and communicated effectively across teams. Qualifications Education: Bachelor s degree or higher (preferred). Experience: 10+ years of experience in the insurance sales industry. 10+ years of BPO (Contact Center, Outsourcing) experience, particularly in the health insurance domain. Proven experience managing large teams (500+ FTE) and overseeing operational activities across multiple projects and locations. Experience in managing financials, including budgeting, P&L management, and margin analysis. Strong background in outbound sales with experience presenting to C-level executives. Proven ability to manage complex operations and achieve business goals. Skills & Attributes: Strong negotiation and business management skills. Exceptional analytical thinking and proactive attitude. Strong written and oral communication skills. Excellent interpersonal skills and teamwork mindset. Ability to work under tight deadlines and manage multiple priorities effectively. Attention to detail and accountability in meeting operational objectives. In-depth knowledge of data analysis, performance, and operational metrics. Additional Attributes: Leadership and organizational skills to inspire and manage teams effectively. Experience in formulating and implementing policies to improve operations. A collaborative mindset with the ability to drive integration across various business functions. Extensive experience presenting and negotiating with senior-level decision-makers, including C-suite executives.

About Us We are seeking passionate individuals who want to innovate, grow, and lead. Join one of the world s largest providers of products and services in the global energy industry. We invest in our employees, helping them build rewarding careers while offering exciting challenges and opportunities. Job Summary As an Entry-Level Laboratory Technician, you will train and develop skills in laboratory operations while following health, safety, and environmental (HSE) standards. Under direct supervision, you will conduct laboratory tests, document results, and learn to operate basic testing equipment. This role is an excellent opportunity for candidates eager to build a career in laboratory sciences and production solutions. Key Responsibilities Familiarize yourself with the Chemical Hygiene Plan and adhere to current HSE laboratory safety standards. Follow prescribed safety rules and regulations while performing assigned duties. Conduct prototype or laboratory tests following established procedures. Learn to build equipment and perform basic material or environmental tests using electrical, electronic, chemical, and mechanical equipment. Document and report test data accurately for reporting purposes. Maintain files and documentation related to test equipment and test results. Qualifications Education: Completion of at least 8 hours of college-level chemistry is preferred. Experience: No prior experience required; this is an entry-level role with on-the-job training provided. Skills & Competencies Basic understanding of laboratory safety protocols and procedures. Strong attention to detail with excellent documentation skills. Willingness to learn and work with laboratory testing equipment. Ability to follow instructions and work under direct supervision. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Summary: Halliburton is looking for an Entry-Level Equipment Technician to join their Production Enhancement team. This role involves performing rig up and rig down of equipment at the well site, ensuring the safe operation of service equipment, and ensuring customer satisfaction with the work performed. The technician will be responsible for ensuring equipment is properly prepared, calculating job requirements, and contributing to continuous improvement and safety processes. Key Responsibilities: Rig Up and Rig Down: Perform equipment rig up and rig down on location, preparing equipment to perform services as per customer specifications. Ensure the safe operation of service equipment including DME, high-pressure pumps, and blenders during service delivery. Job Coordination and Data Handling: Perform necessary calculations at the well site. Collect and distribute data as needed during jobs. Coordinate the clean-up, repair, and preparation of equipment for the next job. Safety and Quality: Promote and contribute to safety awareness and environmental consciousness. Take an active role in quality and continuous improvement processes to enhance service delivery. Competency and Skill Development: Utilize competency processes to enhance skill development and job performance. Be knowledgeable of HMS and HSE standards. Qualifications: Required: High school diploma or equivalent is required. 6 months of experience in a similar role or industry, with required competencies achieved at current and next levels. Skills and Competencies: Ability to perform physical tasks associated with rigging up and rigging down equipment. Knowledge of safety procedures and environmental guidelines. Strong attention to detail and ability to follow instructions accurately. Why Halliburton? Career Growth: As an entry-level technician, you will gain hands-on experience and develop the skills necessary for career advancement in the energy industry. Learning Opportunities: Halliburton offers on-the-job training and the opportunity to enhance your competencies for future growth. Safety Culture: Halliburton values safety and provides a supportive environment for employees to grow while maintaining high safety standards. How to Apply: This is an excellent entry-level opportunity for those looking to start a career in the energy services industry.

Biomedical Engineer - Field Operations Location: Mumbai Department: Operations Customer Success (Field) Employment Type: Full-Time About Dozee Dozee Health AI is India s leading provider of AI-powered, contactless Remote Patient Monitoring (RPM) and Early Warning Systems (EWS). Our mission is to save lives by improving patient safety, enhancing outcomes, and reducing healthcare costs through innovative, AI-driven technologies. Trusted by hospitals in India, the USA, and Africa, Dozee is revolutionizing healthcare with cutting-edge solutions. Role Overview As a Biomedical Engineer in Field Operations, you will be the face of Dozee at partner hospitals. This role involves conducting product demonstrations, installing and troubleshooting Dozee devices, and training healthcare professionals on device usage. You will ensure that the deployment and functionality of our solutions meet the highest standards, contributing to better patient outcomes and enhanced operational efficiency. Key Responsibilities Product Demonstrations & Installations Conduct live demonstrations of Dozee s devices at hospitals, showcasing their features and benefits to healthcare professionals. Install Dozee devices, ensuring proper setup and smooth functionality. Provide troubleshooting and technical support during and after installations. Training & Support Train healthcare professionals (nurses, doctors) and patients on how to use Dozee devices and the patient monitoring dashboard. Provide ongoing technical support and assistance, ensuring the devices are used effectively. Gather feedback from end-users to identify opportunities for improvement. Site Assessments & Coordination Perform site assessments to understand hospital requirements and communicate device needs to the remote team. Coordinate with remote teams to relay updates and ensure timely resolution of issues during site visits. Relationship Building Build and maintain strong relationships with healthcare professionals to foster trust and collaboration. Ensure clear, consistent communication between Dozee and hospital staff. Requirements Education & Experience Graduation or Diploma in Science, ITI, or a related field. 0-2 years of field operations or field sales experience in the healthcare or hospital industry. Prior experience working with doctors/nurses is preferred. Skills Basic understanding of computer operations and familiarity with technical tools. Excellent communication skills, with fluency in local languages. Willingness to travel within the city and work in hospital wards. Open to working night shifts occasionally as required. Why Join Dozee Be part of an innovative, mission-driven company revolutionizing healthcare with AI. Opportunity to directly impact patient safety and operational efficiency at top hospitals. Work with a team that has already monitored 1M+ patients and saved over 10 million nursing hours. Qualification : Graduation or Diploma in Science, ITI, or a related field

Manager - Infra Projects & Facilities Location: Mumbai Group Company: CEAT Job Description CEAT, a leading global tire manufacturer, is looking for a Manager - Infra Projects & Facilities to oversee day-to-day operations and maintenance of facilities, ensure seamless vendor management, and handle the corporate travel portfolio. This role requires a proactive approach to maintaining infrastructure, managing utilities, and enhancing overall productivity. Key Responsibilities Facilities Management and Maintenance Manage corporate office facilities, company-owned/leased residences, and guest houses. Ensure smooth functioning of communication channels, conference facilities, and mechanical functions. Oversee facility maintenance tasks including safety, sanitation, and grounds equipment. Ensure uninterrupted utility supply, including electricity, water, and HVAC, across all properties. Maintain housekeeping and maintenance quality standards for office and residential spaces. Provide administrative onboarding support to new joinees and senior management. Manage repair, maintenance, and replacement of office equipment, furniture, and vehicles. Vendor Management Liaise with government authorities to ensure regulatory compliance. Build and manage relationships with suppliers and service providers for facility services. Inspect work for compliance with specifications and quality standards. Ensure timely delivery of cleaning, security, and maintenance services. Travel Portfolio Management Liaise with airlines regarding group travel volume and negotiate corporate discounts. Finalize agreements with Travel Management Companies (TMCs) and ensure closure of corporate codes. Coordinate MICE (Meetings, Incentives, Conferences, and Exhibitions) and bulk travel requirements. Integrate Travel & Expense vendors with internal Admin and Accounts teams. MIS and Documentation Maintain accurate MIS to support budgeting and financial planning. Provide reports and analysis as requested by the Admin Head or senior management. Key Competencies Project Management: Ability to manage multiple infrastructure projects from conception to execution. Vendor Management: Strong negotiation and relationship-building skills. Budgeting & MIS: Proficiency in financial planning and handling data reporting for stakeholders. Communication & Coordination: Effective liaison skills with departments and government bodies. Required Qualifications & Experience Education: Bachelor's degree in Engineering, Facilities Management, Business Administration, or a related field. Experience: 7-10 years in facilities management, infrastructure projects, and vendor management. Knowledge: Strong understanding of utility management and corporate travel coordination. Work with a global leader in the tire manufacturing industry. Dynamic and growth-oriented environment with career advancement opportunities. Collaborate with senior management and diverse stakeholders to drive efficiency. Qualification : Bachelor's degree in Engineering, Facilities Management, Business Administration, or a related field

Job Title: Assistant Manager MEP Engineer Location: Mumbai Experience: 5 7 Years Role Overview: We are seeking an experienced Assistant Manager MEP Engineer to oversee the design, implementation, and management of Mechanical, Electrical, and Plumbing systems in real estate projects. The ideal candidate will ensure seamless integration of MEP systems within architectural designs, compliance with regulatory standards, and timely project delivery within budget. Key Responsibilities: Design, plan, and supervise MEP systems for residential and commercial real estate projects, ensuring functionality, safety, and efficiency. Collaborate with architects, structural engineers, and contractors to integrate MEP systems smoothly into overall project designs. Ensure all MEP work complies with local codes, regulations, and quality standards. Monitor project progress, coordinate with vendors and subcontractors, and resolve technical issues promptly to avoid delays. Conduct site inspections and quality checks to verify installation accuracy and performance. Prepare technical reports, drawings, and documentation related to MEP systems. Support cost estimation, budgeting, and procurement activities related to MEP works. Keep abreast of industry best practices, new technologies, and regulatory updates relevant to MEP engineering. Qualifications & Skills: Bachelor s degree in Mechanical, Electrical, or Civil Engineering (specialization in MEP preferred). 5 7 years of relevant experience in MEP design and execution within the real estate or construction industry. Strong knowledge of mechanical, electrical, and plumbing systems, including HVAC, fire protection, and electrical distribution. Familiarity with regulatory codes and standards applicable to MEP systems. Proficient in AutoCAD, Revit MEP, or other relevant design software. Excellent coordination, communication, and problem-solving skills. Ability to manage multiple projects and meet deadlines in a dynamic environment. Qualification : Bachelors degree in Mechanical, Electrical, or Civil Engineering (specialization in MEP preferred)

Position: Assistant Manager MEP Location: Mumbai Department: Sales Job Purpose To manage the implementation of Mechanical, Electrical, and Plumbing (MEP) services across project sites, ensuring that all activities are executed within the defined timelines, budget, and quality standards. Key Responsibilities Oversee and coordinate all MEP-related work on project sites. Act as the primary technical liaison for MEP services with external consultants, contractors, and agencies. Collaborate with the internal design team to review and coordinate MEP drawings and documentation. Verify design documents for accuracy, relevance, and compliance with project requirements. Prepare detailed project schedules and timelines for MEP works in coordination with the planning team. Ensure effective execution and coordination of MEP works at the site, working closely with building engineers. Monitor and report weekly progress of MEP activities. Review and approve shop drawings and ensure documentation is accurate, complete, and audit-ready. Ensure quality compliance for PHE (Public Health Engineering) systems and maintain zero non-conformities during audits. Certify bills related to PHE works after due verification. Performance Indicators Individual Accountability Timely execution of PHE works On-schedule vendor finalization Budget adherence for electrical works Compliance with safety and quality standards Quality and durability of PHE installations Shared Accountability Collaboration across internal teams for project success Effective coordination with consultants and contractors Key Stakeholders External MEP Consultants Contractors Internal Site Execution Teams MEP Design Team Functional Competencies In-depth understanding of PHE systems and technical specifications Familiarity with green building materials and sustainability norms Knowledge of safety standards and OHSAS compliance Proficiency in electrical and mechanical design concepts Leadership Competencies (Mahindra Core Competencies) 1. Leveraging Human Capital Foster trust and teamwork within and across teams Empower team members by recognizing and developing their strengths Demonstrate ownership and drive performance 2. Weaving Passion & Energy at Work Promote innovation and support creative problem-solving Learn from setbacks and encourage thoughtful risk-taking Exhibit empathy and active engagement with team members 3. Result Orientation with Execution Excellence Lead by example in achieving project milestones Ensure quality improvement and timely delivery Take full ownership of team goals and deliverables Qualifications and Experience Qualification: B.E./B.Tech. in Mechanical Engineering Experience: 7 8 years of relevant experience in MEP project execution and management Qualification : B.E./B.Tech. in Mechanical Engineering

Position: Assistant Manager Project Execution Location: Mumbai Department: Sales Apply Now Job Purpose To handle the construction activities at the site for the allotted towers. Principal Accountabilities Executing construction activities (Finishing activities) at the site with maximum quality. Studying drawings and specifications and executing the same through proper planning. Handling the queries and resolving the problems of the site or escalating to the site head wherever required. Maintaining high quality standards at site. Ensuring the safety on the site. Coordinating with Liasoning, Contracts, Purchase, Quality and vendors for the smooth functioning of the project. Updating the site head on the on-going project on a regular basis. Ensuring the project is running as per the budget. Following the SOP of the organization. Managing a team of 3-4 project engineers. Identifying the training needs on the basis of safety inspection data and conducting appropriate interventions (e.g., coaching, mentoring, on the job training). Performance Measure of Success: Individual Accountability Elimination of defects in blockwork/gypsum/external plaster Achievement of BWR targets Employee engagement score for the team (MCARES) Safety & quality score Shared Accountability Vendors Quality team Safety Team Key relationships: External Vendors Internal Quality team Safety Team Functional Competencies: Technical knowledge of construction operations Interpersonal skills Stakeholder management Mahindra Leadership Competencies (3 Critical competencies): Leveraging Human Capital Managing & creating a high-performance team by building trust, team-work and collaboration Leveraging the knowledge and skills within the team Demonstrating commitment and ownership of results Weaving Passion & Energy at work Providing support to others when required & leveraging help from others Being able to learn from mistakes and encouraging the team to do the same Demonstrating empathy, warmth & attentiveness Result Orientation with Execution Excellence Leading the team by example and effectively managing various variables of a given project Displaying dedication towards quality improvement and on-time delivery Taking end-to-end ownership of team goals Qualification and Experience: Qualification B.E./B.Tech. in Civil Engg. Experience 6-10 years of work experience Qualification : B.E./B.Tech. in Civil Engg

Job Requirements: Should have a basic understanding of programmable logic controllers (PLCs), distributed control systems (DCS), Safety systems, Fire & Gas systems, IIoT, and Industry 4.0. Should be aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have a firm and increasing understanding of process control concepts and techniques. Should understand networking devices & components like Ethernet switches, Fiber optic switches, firewalls, etc. Should understand various industrial communication protocols like Modbus, Profibus, HART, FF, etc. Strong analytical and mathematical skills. Strong written and verbal communication skills. Ability to work effectively as an individual and in a team environment, and to handle multiple projects simultaneously. A growth mindset, a commitment to lifelong learning, and willingness to accept criticism. Willingness to travel for site commissioning activities depending on project requirements. Maintaining a high degree of professionalism and diligence. Job Responsibilities: Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives. Designing, implementing, and testing a wide range of I/O (HART, Modbus, FF, Profibus, etc.), basic control functions, interlocks, sequences, operator interfaces, and other control components on DCS and PLC systems. Documenting project control and safety functions, presenting them to the customer, and obtaining approval. Preparing simulations, test scenarios, test documentation, and participating in customer Factory Acceptance Tests (FAT). Actively participating in project meetings, discussions with customers, visiting sites, and supporting commissioning activities. Troubleshooting control and communication problems between different systems during FAT and at site. Compiling and maintaining project databases, configuration data, and other project information. Compiling data and preparing reports for various activities, such as customer proposals, FEED studies, project design documents, FAT, and SAT procedures. Identifying technical opportunities and economic justifications for control system improvements and communicating those to the Project Manager and/or Sales. Qualifications: Educational Qualification: Must be a Graduate in Engineering Disciplines: Electronics & Instrumentation Engineering or Instrumentation & Control Engineering, with a minimum of 12 years of relevant experience. Should have good communication skills. Ability to work effectively as an individual and in a team environment, and to handle multiple projects simultaneously. Qualification : Must be a Graduate in Engineering Disciplines Electronics & Instrumentation Engineering, Instrumentation & Control Engineering with minimum 12 years of relevant experience.

Business Process Specialist Location: Mumbai, India About Dow At Dow, we believe in putting people first and are committed to delivering integrity, respect, and safety for our employees, customers, and the planet. We are a diverse and innovative team of relentless problem solvers who work together to transform industries and shape a sustainable future. Our purpose is simple: to deliver a better world through science and collaboration. If you're looking for a challenging and meaningful role, you re in the right place. About the Role Dow's Integrated Supply Chain & Improve & Scale Digital Solutions Team delivers value by defining, enabling, and supporting processes and system capabilities needed by our businesses. As a Business Process Specialist, you will play a critical role in executing strategies, driving process enhancements, and collaborating with global and regional teams to optimize supply chain operations. You will collect and analyze work process and system requirements, ensuring alignment with design principles and business needs. You will act as a subject matter expert for key supply chain functions, supporting systems like SAP, Microsoft Dynamics, OM Partners, Oracle Transportation Management, and more. Additionally, you will be responsible for compliance, regulatory adherence, training, and continuous process improvement initiatives. This role operates under the functional guidance of Global Business Process Leaders and Experts, collaborating with business process teams across Integrated Supply Chain (ISC) and Information Systems (IS). Key Responsibilities Process & System Optimization Develop in-depth knowledge of work processes, systems, technologies, applications, data, and key metrics. Provide expert-level support on system functionality, process improvement, and issue resolution. Gather, evaluate, and document work process requirements for global initiatives and projects. Ensure process compliance with regulatory and internal standards. Collaboration & Stakeholder Engagement Act as a key liaison between business units, IT teams, and process improvement functions. Support peer organizations and cross-functional teams in corporate initiatives, system testing, data migration, and implementation. Develop and deliver training programs, knowledge transfer sessions, and coaching for support teams. Data & Performance Analysis Analyze process performance metrics to monitor consistency and alignment with business goals. Identify gaps in global capabilities, leveraging best practices and emerging technologies for continuous improvement. Qualifications & Experience Education Bachelor s degree (Required) Engineering or Science preferred. Experience Minimum 3 years of relevant experience in Supply Chain, Customer Service, or Process Improvement. Technical Skills Advanced skills in Microsoft Excel, Power BI, and PowerPoint. Strong experience in handling large data sets from multiple sources. Proficiency in Data Visualization tools & techniques. Preferred Skills Digital mindset with a strong focus on innovation and automation. Critical thinking and problem-solving skills. Project management and system/process improvement expertise. Training delivery experience. Excellent communication skills verbal and written. Additional Information Flexibility to support global operations and alternate time zones (North America, EMEAI, LAA, APAC) is required. Relocation assistance is NOT available for this role. Competitive Salary & Bonus Market-aligned compensation with performance-based incentives. Career Growth Opportunities for training, mentoring, and professional development. Comprehensive Benefits Medical, life insurance, and mental health support. Work-Life Balance Flexible workplace culture for personal and professional productivity. Parental & Family Support Paid leave for new parents and caregivers. Paid Time Off & Volunteering Vacation allowance, community engagement, and Employee Resource Groups (ERGs). Wellbeing & Perks Gym memberships, discounts, and transportation benefits (location-dependent). About Dow India Dow Chemical International Pvt. Ltd. (Dow India) is a leader in sustainable materials science, providing innovative solutions across packaging, infrastructure, automotive, and consumer care. With 1,000+ employees, we are a Great Place to Work Certified company, committed to corporate social responsibility (CSR). We actively support women, children, and differently-abled individuals through technology and volunteerism. Join Our Team & Make an Impact! At Dow, we celebrate diversity, collaboration, and innovation. If you are passionate about business process improvement and digital transformation, we encourage you to apply! Apply now and be part of a global team transforming industries through science! Qualification : Bachelors degree (Required) Engineering or Science preferred.

Description The Sr Specialist will provide support in the CAPA management process and is the responsible Quality Approver. They will be responsible for executing quality reviewer/approver responsibilities for the NC/CAPA Management Process. This includes ensuring timely initiation and completion of investigations and CAPAs, collaborating with key stakeholders to resolve conflicts and align on the path forward, and determining when escalation to stakeholders or senior management is required to resolve issues. The Sr Specialist will have responsibility for ensuring the investigation and CAPA owners are progressing to plan by monitoring status and providing feedback and comments to direct progress during the investigation and root cause analysis/immediate cause phases, and during preparation of Corrective/Preventative action plans and effectiveness monitoring plans. They are knowledgeable and experienced in the CAPA management process and system and can guide and educate issue owners on best practices. Attention to detail, time management skills, and the ability to build and maintain relationships are essential. CAPA reviewer/approver for CAPA Management Process: Facilitate the initiation of investigations and CAPAs, and monitor progress and approvals. Collaborate with key stakeholders to support the end-to-end NC/CAPA process. Ensure that CAPA procedures and requirements are followed and met. Escalate complex issues to CIM management for resolution. Work with stakeholders, senior management, and governance bodies for awareness and resolution, as needed, including any issues impacting the progress toward completion of investigations, root cause analysis, impact analysis, and closure of CAPA Records. Review evidence and approve closure of CAPA plans. Monitor effectiveness of CAPAs to ensure the Root Cause is eliminated or reduced to acceptable level. Drive key deliverables and ensure timely completion of activities. Support/Provide regular updates for CAPA status, metric reports, and trending, as needed. Participate in and/or support internal audits and regulatory inspections, as needed. Attend, participate and/or facilitate CAPA review meetings, as needed. Perform other duties as necessary. Decision Making and Problem Solving: Ability to work independently and coordinate across CAPA and Issue Management (CIM). Consult with CIM management as need for resolution of complex issues. Requires basic management skills for cross-functional interactions and coordination. Facilitates resolution of issues and able to collaborate with stakeholders at varying levels of management across multiple organizations. A fundamental understanding of the risk management process to engage key stakeholders and mentor colleagues to capture insights and make risk-based decisions. Excellent communication and writing skills demonstrated by the ability to write executive summaries and ad hoc reports promptly and clearly as well as compile and present data to other professionals. Requires analytical skills to examine data and perform analysis. Requires decision-making skills to approve the appropriateness, effectiveness, quality and compliance of documented robust investigations, root cause analysis and corrective/preventative action plans. Working Relationships: Must be able to effectively operate in a matrixed environment and interact with cross functional leaders on a regular basis. Associate Director/Director, CAPA and Issue Management interfaces and informs as needed to discuss issues. CAPA and Issue Management team members interfaces daily as needed to manage workload; interfaces weekly in team meetings. R&D Senior Management, R&D Quality, Regulatory Affairs, Medical Affairs, and other business functions involved in owning investigations and delivering CAPA commitments - interfaces as needed to address identified issues and provide guidance on established processes. J&J partners must be able to effectively interact with third-party organizations, and marketing partners as needed to address cross-company and cross-departmental issues. Qualifications Bachelor s Degree in Life Science or related discipline or equivalent is required. Knowledge and experience with regulations and regulatory compliance issues. At least 3 years of experience in an applicable compliance field and or equivalent experience/training in a related R&D area. Experience with Non-Conformance/CAPA. Analytical and data skills. Excellent communication and writing skills demonstrated by the ability to develop clear and concise professional correspondence. Must be a problem solver, strategic thinker, and collaborator. Excellent organization, prioritization, and time management skills. Demonstrated competencies include adaptability, attention to detail, and ability to build and maintain relationships and partnerships across the organization. Ability to build and maintain cross-functional interactions and coordination. Ability to build consensus, influence, and negotiate. Knowledge in R&D related activities which may include safety related areas, safety reporting for both investigational and marketed products, clinical study coordination, etc. Knowledge of Quality Management, Project Management and/or Process Excellence concepts and practices. Qualification : Bachelors Degree in Life Science or related discipline or equivalent is required.