Safety Systems Jobs in Pune

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Project Leader Location: Pune Experience: 4 7 Years Education: B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields Job Summary We are seeking a Project Leader with a strong background in embedded software development, preferably within the automotive domain, to lead and coordinate multiple software projects. This role requires a balance of technical proficiency and leadership capabilities to manage teams, ensure compliance with industry standards, and deliver high-quality embedded solutions on time. Key Responsibilities Lead and coordinate multiple embedded software projects from inception through completion. Ensure project timelines, milestones, and deliverables are met in accordance with customer and internal expectations. Guide teams through the Software Development Life Cycle (SDLC) following standards such as ASPICE, CMMI, or equivalent. Participate in embedded software development using languages such as C, C++, or Python. Ensure adherence to quality, safety, and cybersecurity standards including: AUTOSAR (Automotive Open System Architecture) ISO 26262 (Functional Safety) ISO 21434 (Cybersecurity) Apply problem-solving and analytical thinking to address technical challenges. Foster collaboration among cross-functional teams including software, hardware, and testing. Maintain clear documentation and communication with internal stakeholders and clients. Required Skills & Experience 4 7 years of experience in embedded software development, with leadership exposure. Strong command over programming languages: C, C++, or Python (at least one). Hands-on experience with SDLC and process compliance to ASPICE, CMMI, or similar standards. Experience in software testing methods, including unit, integration, and system testing. Knowledge of AUTOSAR, ISO 26262, and ISO 21434 standards. Strong problem-solving and analytical skills. Excellent organizational, communication, and coordination abilities. Preferred / Added Advantage Certified Scrum Master (CSM) or equivalent Agile certifications. Experience in the automotive domain (strongly preferred). Exposure to project coordination tools like Jira, Confluence, or similar platforms. Be a part of high-impact embedded projects in the automotive and industrial sectors. Work in a collaborative, innovation-driven culture with global exposure. Accelerate your career with leadership responsibilities and domain expertise. Competitive compensation and professional development opportunities. Qualification : B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields

Job Title: Software Engineer Test II Location: Pune Company: TraceLink Experience: 3 4 Years Company Overview: At TraceLink, our mission is to protect patients by transforming the pharmaceutical supply chain through digital innovation. Our powerful Opus Platform and comprehensive suite of software solutions enable the industry to achieve greater compliance, visibility, and collaboration minimizing disruptions in medicine availability globally. Founded in 2009, TraceLink now operates across 8 global offices with 800+ employees, serving 1,300+ customers in over 60 countries. Recognized as an industry leader by Gartner, IDC, and for our company culture by Comparably, we continue to lead the way in life sciences supply chain innovation. Position Overview: We are seeking a skilled and detail-oriented Software Development Engineer in Test (SDET) to join our Pune-based team. As Software Engineer Test II, you will play a key role in developing and executing automated testing tools and frameworks, contributing to the quality and reliability of TraceLink s platform and applications. Key Responsibilities: Design, build, and maintain automation frameworks for functional, performance, and integration testing Execute automated and manual tests on the TraceLink platform and applications Build and extend tools for automated testing that simulate real-world transaction volumes (millions per day) Interface testing tools programmatically with TraceLink s platform and APIs Prepare clear, concise defect reports that aid quick reproduction and resolution Verify bug fixes and ensure test coverage for new features and defect resolutions Collaborate closely with development teams to incorporate testability into design and architecture Perform performance testing to identify bottlenecks and ensure system scalability Create testing tools usable by non-developers to promote broader adoption across QA Stay up-to-date on the latest testing technologies and best practices to improve test coverage and efficiency Provide high-level technical insights and contribute to continuous improvement of testing processes Respond to and handle support requests related to testing and test environments Qualifications: Bachelor's degree (or foreign equivalent) in Computer Science, Software Engineering, or related field 3 4 years of experience in software testing and test automation Proficiency in Java, Eclipse, Ant or Maven, and Unix/Linux Strong experience with test automation frameworks like TestNG or Pytest Experience testing web-based applications, Web Services, and REST APIs Proven experience in creating and executing formal test plans, test data, and configurations Familiarity with performance testing and identifying performance bottlenecks Good understanding of data structures and algorithms (DSA) Lists, Maps, Sets Experience in ETL processes and SQL scripting Strong debugging and analytical skills Ability to work in fast-paced, collaborative environments Preferred/Bonus Skills: Experience with cloud platforms, especially AWS Familiarity with running and maintaining cloud-based enterprise applications Exposure to the pharmaceutical or life sciences industry If you re passionate about automation, quality, and building tools that scale with complex systems, TraceLink offers a collaborative environment where you can make a real impact on patient safety worldwide. Qualification : Bachelor's degree (or foreign equivalent) in Computer Science, Software Engineering, or related field

Job Title: Senior Advanced Technical Services Engineer Location: Pune Experience: 5+ Years Company: TraceLink Department: Advanced Technical Services Company Overview: At TraceLink, we are transforming the global pharmaceutical supply chain to protect patients and ensure the availability of safe medicines worldwide. Our Opus Platform and innovative software solutions empower pharmaceutical companies to digitize operations, improve visibility, ensure compliance, and collaborate more effectively across complex global networks. Founded in 2009, TraceLink operates in 8 global offices, with 800+ employees, and serves 1,300+ customers across 60+ countries. Recognized by Gartner, IDC, and Comparably, we are proud to be a trusted industry leader and a great place to work. Position Overview: We are looking for an experienced and highly skilled Senior Advanced Technical Services Engineer to join our Pune-based team. As a senior member of the Advanced Technical Services team, you will lead technical issue resolution efforts, support internal tooling and data repair processes, and act as a technical mentor to the broader Technical Support organization. This role combines strong technical proficiency, problem-solving ability, and excellent interpersonal communication, playing a key role in enhancing customer satisfaction and internal team capabilities. Key Responsibilities: Resolve complex technical issues by working directly with TraceLink products and collaborating with internal teams to create custom solutions or internal tools Serve as a technical mentor and advisor to Technical Support Engineers Lead the triage, prioritization, and execution of customer data repair requests Create, maintain, and support scripts and tooling to enhance team productivity Act as a recognized Subject Matter Expert (SME) for 3 4 core TraceLink applications Document technical processes and deliver training to internal support teams Advocate for customer needs by collaborating with Product, Engineering, and other cross-functional teams to drive product improvements Analyze and troubleshoot application logs, errors, and complex integrations Skills and Competencies: Proficient in XML, JSON, CSV reading, parsing, and manipulation Working knowledge of scripting languages such as Perl, Python, Shell scripting Strong debugging and log analysis skills Ability to propose and evaluate multiple solutions to technical problems Understanding of B2B integration technologies such as AS2, SFTP, Web Services Extensive experience with tools including Microsoft Office, Google Workspace, Salesforce, Slack, and collaboration platforms Excellent verbal and written communication skills; strong documentation practices Highly self-motivated, with proven time management and project coordination skills Experience in mentoring, coaching, and cross-functional collaboration Proven ability to lead team efforts and resolve high-impact customer issues Strategic thinker who contributes to the continuous improvement of support processes Essential Qualifications: Bachelor s degree in Computer Science, Information Technology, or related field (or equivalent experience) Minimum 5+ years of experience in a technical customer-facing role, preferably within SaaS or enterprise software companies Strong understanding of UNIX/Linux environments and Java-based applications Working knowledge of ERP systems Fluent in written and spoken English (additional languages a plus depending on region) What You'll Gain: Opportunity to work on mission-critical systems that impact global patient safety Collaborate with a global team in a dynamic, high-growth company Mentorship opportunities and career development in advanced technical roles Work in an environment that values innovation, ownership, and teamwork If you're passionate about solving complex technical challenges, mentoring others, and making a meaningful impact in the life sciences sector, we invite you to join us at TraceLink. Qualification : Bachelors degree in Computer Science, Information Technology, or related field (or equivalent experience)

Job Title: Technical Support Engineer II Location: Pune Experience: 2 5 Years Company: TraceLink Department: Support and Service Company Overview: TraceLink s innovative software solutions and Opus Platform empower the pharmaceutical industry to digitize their supply chain, enhancing compliance, visibility, and decision-making. Our technology helps reduce disruptions in medicine supply, ensuring patients worldwide receive the treatments they need. Founded in 2009, TraceLink has expanded to 8 offices globally, with over 800 employees and more than 1,300 customers across 60+ countries. We are recognized as an industry leader by Gartner and IDC, and celebrated for our positive company culture by Comparably. Position Overview: As a Technical Support Engineer II, you will play a vital role within our Support and Service organization to ensure customer success and satisfaction. Your technical expertise and problem-solving skills will be key to helping customers implement and utilize TraceLink s Life Sciences Cloud solutions effectively. This role requires strong interpersonal skills combined with experience in web applications, UNIX systems, scripting, and troubleshooting complex technical issues. Key Responsibilities: Engage directly with customers and internal teams to understand, document, troubleshoot, and resolve technical issues efficiently Develop and improve standard troubleshooting procedures and tools for recurring issues Collaborate closely with Product Management, Engineering, and Quality Assurance teams to facilitate timely resolution of customer-reported problems Provide excellent customer communication and ensure timely updates on issue status Skills and Qualifications: Proven experience supporting proprietary, enterprise-level software applications Strong customer-oriented communication skills with a professional, friendly attitude Excellent verbal and written communication abilities Strong analytical mindset with great attention to detail Proficiency with UNIX command line, especially in parsing and analyzing data sets Bachelor s degree in Computer Science, Information Technology, or a related field 2 to 5 years of experience in a technical support or troubleshooting role Ability to read, parse, and manipulate technical data formats such as XML, EDI, CSV Working knowledge of B2B communication protocols like AS2, SFTP, and Web Services Experience with scripting languages (e.g., Perl, Python, Shell) is a plus Familiarity with supply chain software and pharmaceutical industry knowledge preferred Flexibility to work shifts across Americas, EMEA, and India/APAC time zones (daytime, evening, and overnight) Work with cutting-edge cloud technology impacting patient safety worldwide Collaborate with a global, high-performing team Opportunity for career growth in a fast-paced, innovative environment Support an industry leader with a commitment to employee growth and culture Qualification : Bachelors degree in Computer Science, Information Technology, or a related field

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Job Title: CM - Officer EHS (Environment, Health & Safety) Location: Pune Department: Construction Management EHS Cell Employment Type: Full-Time Experience: 5 to 8 Years Role Objective To ensure the effective implementation of Environment, Health & Safety (EHS) policies and procedures across construction, operations, and maintenance activities, promoting a safe and compliant work environment at project sites. Key Responsibilities Ensure EHS compliance across all construction, operation, and maintenance activities on assigned projects. Conduct daily safety inspections to enforce safe work practices and identify unsafe conditions. Monitor and ensure proper storage and disposal of hazardous waste in line with statutory norms. Oversee the maintenance and availability of firefighting systems and personal protective equipment (PPE). Maintain and update Material Safety Data Sheets (MSDS) for raw materials and chemicals on site. Deliver site-specific training programs for employees and contractors on: EHS regulations and compliance Safe handling of hazardous substances Proper usage of PPE Fire prevention and response Develop and maintain emergency contingency plans for the site. Issue safety alerts and communicate unsafe acts or conditions to project management promptly. Prepare and submit regular safety reports and documentation to relevant stakeholders. Design and conduct site-specific training modules and safety presentations for workers and supervisory staff. Carry out periodic audits of construction zones, labor camps, and material storage areas. Oversee health monitoring initiatives within labor camps and ensure hygienic living conditions. Ensure strict adherence to PPE protocols, display of safety signages, and compliance across all project levels and locations. Qualifications & Experience Education Mandatory: BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering Preferred Additional Certifications: Advanced Diploma in Industrial Safety Diploma in Fire & Safety Postgraduate Program in HSE Management NEBOSH General Certificate M.Tech in Safety or related field Experience 5 to 8 years of relevant EHS experience, preferably in: Real Estate Infrastructure Projects Large-Scale Construction Firms Skills & Competencies In-depth knowledge of EHS standards, safety regulations, and construction site risk mitigation Proficiency in safety audits, hazard identification, and preventive action planning Strong training and communication skills across multiple levels of workforce Proficiency in working languages: English, Hindi, and Marathi Qualification : BE / B.Tech / Diploma in Civil, Mechanical, or Electrical Engineering

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Warehouse Specialist Location: Pune Reports To: Manager Warehouse Experience: Minimum 3 years Education: Bachelor s degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience) Job Summary We are looking for a Warehouse Specialist to join our construction equipment production warehouse team. The ideal candidate will play a key role in optimizing warehouse operations through the maintenance of SAP-Warehouse Management (SAP-WM) master data, driving continuous improvements, planning warehouse layouts, and ensuring seamless collaboration with third-party logistics (3PL) partners. This role supports production by ensuring efficient material movement and inventory control aligned with business goals. Key Responsibilities SAP-WM Master Data Management Create, update, and manage master data in SAP-WM (material master, storage bins, warehouse configuration). Resolve discrepancies and maintain data accuracy for effective coordination with internal teams and 3PL. SAP-WM Process Improvement Analyze and enhance existing SAP-WM processes to improve productivity, system performance, and 3PL integration. Document and implement optimized workflows in collaboration with IT and warehouse operations. Warehouse Layout & Space Optimization Design and revise warehouse layouts to maximize space utilization, improve material flow, and meet changing production needs. Conduct regular assessments based on inventory trends and 3PL operational requirements. PFEP (Plan for Every Part) Develop and maintain PFEP documentation to ensure efficient inventory management and line-side material delivery. Work closely with procurement, production, and logistics to align inventory plans with manufacturing schedules. Record Keeping & Documentation Maintain accurate records of inventory movement, SAP-WM transactions, and 3PL documentation. Ensure compliance with audit standards, company policies, and safety regulations. Warehouse Operations (Inbound & Outbound) Oversee receiving, put-away, picking, and dispatch operations, ensuring timely material flow. Collaborate with 3PL teams to meet customer commitments and production timelines. Production Line Material Feeding Ensure timely material replenishment to production lines based on JIT and lean principles. Coordinate closely with 3PL and production teams to prevent delays or inventory build-up. Required Skills & Competencies 3+ years of hands-on experience in warehouse operations with a focus on SAP-WM. Expertise in maintaining SAP-WM master data and leading process improvement initiatives. Strong knowledge of inbound/outbound logistics, inventory control, and production line support. Experience coordinating with third-party logistics (3PL) partners. Familiarity with PFEP generation and warehouse layout planning. Understanding of lean warehousing and JIT inventory management. Excellent record-keeping, compliance awareness, and documentation accuracy. Strong problem-solving, communication, and cross-functional collaboration skills. Experience in construction equipment or heavy machinery manufacturing is a plus. SAP-WM certification or equivalent training is preferred. Qualification : Bachelors degree in Supply Chain Management, Logistics, Industrial Engineering, or related field (or equivalent experience)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Technical Specialist Armoured Vehicles Location: Pune Experience: 5 10 Years Education: B.E. in Mechanical Engineering Job Summary: We are looking for a highly skilled Technical Specialist Armoured Vehicles to join our engineering team in Pune. The role involves the end-to-end design, integration, and development of armoured vehicle systems, with a focus on CAD-based design, vehicle packaging, and aggregate integration. Job Purpose: To lead the design and development of armoured vehicles, ensuring functional integration of mechanical systems and effective packaging using advanced CAD tools. Key Responsibilities: Design & Integration: Perform vehicle integration and packaging of key aggregates (powertrain, suspension, electronics, etc.) using Creo or CATIA software. Design components including armoured hulls, braking systems, pneumatics, and other critical mechanical subsystems. Ensure optimal space utilization and system compatibility within the vehicle structure. Execution & Implementation: Translate technical requirements into detailed CAD models and engineering drawings. Collaborate with cross-functional teams to ensure design feasibility and compliance with performance, safety, and protection standards. Required Skills & Competencies: Functional Skills: In-depth knowledge of vehicle packaging principles, specifically for armoured vehicle platforms Strong understanding of mechanical systems integration in defense or specialized vehicle domains Technical Skills: Proficiency in CREO and/or CATIA for 3D modeling and design documentation Familiarity with defense standards and automotive design protocols Soft Skills / Behavioral Competencies: Effective stakeholder management across engineering, manufacturing, and procurement teams Solid project management abilities to drive timelines and coordinate technical deliverables Qualification : B.E. in Mechanical Engineering

Position: Senior Officer / Senior Engineer (MG4) Location: Pune Experience: 3 to 5 years Job Description: The Senior Officer / Senior Engineer will be responsible for engineering tasks related to customized design, matching, and development of technical systems tailored to prime movers for specific marine applications. The role requires working closely with tender requirements and inputs from customers and marketing teams. Key Responsibilities: Perform detailed design work using CREO software to develop customized solutions. Release application codes, technical drawings, and specifications necessary for manufacturing and procurement once orders are awarded. Provide technical support by preparing and updating part specifications and details for parts development and procurement teams. Support assembly and testing teams with relevant technical specifications and part creation/updation. Maintain and update documentation in compliance with Integrated Management System (IMS) requirements. Required Skills & Experience: 3 to 5 years of experience in engineering design, preferably in marine or related heavy engineering domains. Proficiency in CREO CAD software for detailed design work. Strong understanding of product lifecycle, from design to manufacturing support. Good documentation and compliance management skills, especially related to IMS standards. Ability to collaborate effectively with cross-functional teams including marketing, procurement, assembly, and testing.

Position: Chief of Medical Services Location: Pune Experience: 10 15 Years (including 5+ years in a leadership role) Qualification: Mandatory: MBBS/MD Preferred: MHA / MPH / MBA in Healthcare Management License: Valid medical license and board certification About the Role We are seeking an accomplished and dynamic Chief of Medical Services to lead and oversee the clinical governance, medical operations, and quality of care across the hospital. This strategic role requires a senior medical professional with a proven track record in leadership, regulatory compliance, and operational excellence. As a key member of the leadership team, you will ensure that all medical services meet the highest standards of care, safety, ethics, and efficiency. Key Responsibilities Provide clinical leadership to guide the planning, implementation, and improvement of medical services Oversee adherence to hospital policies, protocols, and ethical practices across all clinical departments Lead the review and analysis of sentinel and adverse events to ensure continuous quality improvement Manage medical manpower planning, including recruitment, credentialing, and budgeting for consultants and junior doctors based on occupancy and hospital needs Collaborate with administrative and support departments to ensure timely execution of contracts, payments, and medical service-related processes Ensure all clinical services are delivered in line with the organization s standards, protocols, and regulatory guidelines (e.g., NABH, JCI) Conduct daily administrative rounds, engage in patient and family counselling, and address medical grievances effectively Supervise and enforce proper documentation, storage, and management of medical records in line with retention and medico-legal policies Ensure timely and accurate medico-legal documentation and follow-ups Monitor and drive statutory and regulatory compliance across all medical departments Required Skills & Competencies Strong clinical acumen backed by MBBS/MD qualification Proven leadership and team management capabilities in a healthcare setting Expertise in strategic planning, decision-making, and hospital administration In-depth knowledge of regulatory standards (e.g., NABH, JCI, MCI, statutory norms) Excellent interpersonal and communication skills for effective collaboration and conflict resolution Ability to lead multidisciplinary teams and ensure a patient-centric approach to care Eligibility Criteria MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred 10 15 years of clinical experience, including 5+ years in a senior healthcare management or leadership role Valid medical registration and board certification Qualification : MBBS and MD (mandatory); MHA/MPH/MBA in healthcare preferred

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Requirements Software QA Analyst Join our Industrial & Energy Technology Team! Baker Hughes Digital is looking for an experienced Software Engineer to work on a number of exciting projects that will have a very positive impact on Baker Hughes' business. Partner with the best You will act as a member of the Software Center of Excellence, representing high-quality design and development practices. As a Software QA - Analyst, you will be responsible for: Acting as a member of the Software Center of Excellence, representing the face of high-quality design and development practices Developing high performing, scaling, and innovative end-to-end web applications Collaborating with system engineers and software developers to implement solutions that are aligned with and extend shared platforms and solutions. Applying principles of SDLC and methodologies like Lean/Agile/XP, CI, Software and Product Security, Scalability, Documentation Practices, refactoring, and Testing Techniques Writing codes that meets standards and delivers desired functionality using the technology selected for the project. Building features such as web services and Queries on existing tables Understanding performance parameters and assess application performance. Working on core data structures and algorithms and implement them using language of choice. Fuel your passion. To be successful in this role you will: Electronics/instrumentation Engineering background is preferred. Minimum 3-4 years of proven experience as a Quality Assurance Tester Have good knowledge of SW QA methodologies, tools & processes & experience writing comprehensive test plans & cases. Familiarity with Agile Software development processes and regression testing Hands-on with UI/API Testing (REST service testing), BDD Experienced working with any of the tools- JIRA/Azure DevOps. Working knowledge of test management software like Rally, TFS, MTM etc. (preferably cucumber). Knowledge of test automation framework, tools is preferred such as Python, Java & Selenium. Knowledge of any static code analysis tools like SonarQube, Security analysis tools such as Checkmarks & Quails/Zap. Knowledge of Jenkins and JMeter is a plus. Work in a way that works for you. We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect: Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options Safety net of life insurance and disability programs Tailored financial programs Additional elected or voluntary benefits