Supplier Coordination Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Supply Chain Senior Engineer Location: Pune Reports To: Assistant General Manager Supply Chain Educational Qualification: B.E. Mechanical / Industrial Production Experience: 4 7 years Purpose of the Role To ensure timely and efficient procurement of materials in alignment with production needs, while maintaining optimum inventory levels and driving operational excellence across the supply chain. Key Responsibilities Procurement & Inventory Management Release purchase orders and manage end-to-end procurement activities in line with ERP processes. Monitor material availability to meet production schedules while avoiding overstock and stockouts. Implement engineering changes with minimal impact on inventory, obsolescence, and scrap. Stakeholder Communication & Coordination Liaise with suppliers, service providers, and internal departments to ensure smooth material flow. Build and maintain strong, reliable supplier relationships. Escalate unresolved issues to the reporting manager in a timely manner. Compliance & Process Adherence Follow standard operating procedures (SOPs) and organizational protocols rigorously. Ensure adherence to company guidelines on sourcing processes, compliance, and ethical conduct. Key Skills & Competencies Proficient in managing A-Class procurement, including local and imported long-lead items. Strong knowledge of ERP systems and digital procurement tools. Understanding of manufacturing processes and production planning. Familiarity with supply chain principles like cycle time, lead time, JIT, Kanban, push/pull systems. Effective communication and interpersonal skills for internal and external coordination. Strong organizational and planning abilities with a problem-solving mindset. Qualification : B.E. Mechanical / Industrial Production

Admin Executive Location: Pune, Maharashtra Experience: 2 3 Years Function: Administration Education: Graduate Degree Job Summary: We are looking for a proactive and organized Admin Executive to manage day-to-day administrative functions and ensure smooth office operations. This role includes handling office management, facility upkeep, travel coordination, vendor management, and general administrative support. The ideal candidate will bring strong coordination skills, attention to detail, and the ability to manage multiple priorities in a dynamic environment. Key Purpose of the Role: To provide seamless administrative support and ensure an efficient, safe, and well-managed workplace by overseeing office operations, facilities, travel arrangements, and support staff. Key Responsibilities: Guest & Meeting Coordination Manage visitor entry and welcome procedures Arrange and support internal and external meetings Travel Desk Support Coordinate travel bookings, logistics, and accommodation for employees Maintain travel-related records and vendor contacts Facility & Housekeeping Management Oversee maintenance of office infrastructure and common areas Ensure cleanliness and hygiene standards across office premises Event Support Assist in planning and executing company meetings, celebrations, and team events Support Staff Supervision Supervise office assistants, housekeeping, and other support personnel Monitor task allocation and performance Vendor & Agency Coordination Liaise with vendors for office supplies, facility maintenance, and service contracts Manage vendor payments and service agreements Communication & Documentation Draft and manage official communication and internal correspondence Maintain administrative records and documentation Health & Safety Compliance Ensure compliance with workplace safety protocols and statutory requirements General Administrative Support Provide day-to-day support for internal teams and help maintain operational efficiency Ideal Candidate Profile: Background: 2 3 years of experience in office administration Prior experience in IT or non-IT sectors Technical Competencies: Strong coordination and organizational abilities Proficiency in handling travel logistics and vendor interactions Capable of managing office support staff Skills & Strengths: Excellent multi-tasking and time management skills Good verbal communication and interpersonal skills Proficient in English (spoken and written) Opportunity: This role offers the chance to grow within a dynamic and professional organization. As an Admin Executive, you will play a key role in supporting operational excellence and workplace efficiency. Supervision & Collaboration: Reports to: Manager HR Collaborates with: Internal teams, vendors, support staff, and visitors Qualification : Graduate Degree

Position: Deputy Manager SQI (MG3) Location: Pune Experience Required: 8 to 15 years Job Summary: We are seeking a seasoned Deputy Manager (MG3) to lead the Supplier Quality Improvement (SQI) function for Electrical & Electronics parts. This role involves driving supplier development, implementing IEC standards, conducting type testing, and spearheading quality and cost optimization projects. The position also offers cross-functional support to Kirloskar New Energy BU and Kirloskar Electrical & Electronics BU. Key Responsibilities: Supplier Quality Improvement (SQI): Manage SQI activities for Electrical & Electronics parts in new product development. Drive supplier process improvement initiatives and implement best practices. Conduct supplier evaluations, audits, and participate in the selection process. New Product Development & Type Testing: Lead vendor development for new parts aligned with product requirements. Study, interpret, and apply IEC standards to ensure compliance. Supervise and coordinate type testing of components to validate design integrity. Strategic Projects: Lead and contribute to critical quality improvement projects aimed at reducing warranty costs. Drive cost-saving initiatives without compromising quality standards. Provide SQI support across other business units GEE, Kirloskar New Energy BU, and Kirloskar Electrical & Electronics BU. Desired Candidate Profile: Bachelor s degree in Electrical, Electronics, or related Engineering discipline. 8 15 years of hands-on experience in supplier quality, vendor development, and component validation. Strong knowledge of IEC standards and experience with type testing protocols. Proven track record in quality improvement and cost reduction projects. Ability to work cross-functionally and manage multiple stakeholders. Key Skills: Supplier Quality | Electrical & Electronics | New Product Development | Vendor Development | IEC Standards | Type Testing | Quality Improvement | Cost Reduction | Warranty Analysis | Process Audit | SQI Qualification : Bachelors degree in Electrical, Electronics, or related Engineering discipline

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Role Overview Position: Hardware Engineering Lead Electronics Hardware Design As a Hardware Engineering Lead, you will spearhead the design, development, and validation of electronics hardware for advanced consumer appliances. You will drive innovation and ensure product reliability from concept to production through expertise in circuit design, PCB development, and system integration. Key Responsibilities Technical Leadership: Lead hardware design projects, guiding cross-functional teams through the entire development lifecycle. Conduct technical reviews, root cause analysis, FMEA, and validation processes to ensure robust, high-quality designs. Mentor junior engineers and influence critical design decisions. Circuit Design & PCB Development: Design analog, digital, and mixed-signal circuits, including motor controllers, power supplies (AC/DC, DC/DC), and microcontroller-based systems. Develop schematics, perform circuit simulations (PSPICE, LTSPICE), and oversee PCB layout (using tools like Cadence Allegro). Optimize designs for manufacturability, testability, and regulatory compliance (UL, IEC, CE, BIS). System Integration: Collaborate with system architects and cross-disciplinary teams to integrate hardware solutions into product platforms. Manage component selection, de-rating analysis, and supplier coordination to meet performance, cost, and reliability goals. Qualifications Minimum Requirements: Bachelor's Degree in Electrical Engineering, Power Electronics, Electronics & Telecommunication Engineering, or a related field. Preferred: Master s Degree in Electrical or Power Electronics Engineering. Experience: 10+ years of experience in electronics hardware design for consumer appliances or similar industries. Preferred Skills & Expertise Strong hands-on experience in DC/DC SMPS and Linear Power Supply Design (flyback, buck converter, linear regulators). Expertise in component selection (resistors, capacitors, diodes, transistors, MOSFETs, IGBTs, gate drivers) and circuit protection (over-current/voltage protection). Proven track record in EMI/EMC design and troubleshooting. Proficient in performing detailed design calculations for currents and voltages across components. Skilled in using lab instruments (Power Supplies, Oscilloscopes, Logic Analyzers, Power Analyzers). Experience with engineering documentation (Test Plans, Test Reports, ECNs, Hardware Design Documents, Derating Analysis). Research mindset to explore innovative concepts and guide future product development. Ability to identify cost-effective technologies suited for mass production. Strong knowledge of magnetic design (inductors, transformers) for power electronics applications. Understanding of thermal management and EMC considerations in power electronics design. Familiarity with safety standards and regulations relevant to product design and certification. If you are passionate about driving innovation and want to work at the forefront of appliance technology, we d love to hear from you. Qualification : Bachelor's Degree in Electrical Engineering, Power Electronics, Electronics & Telecommunication Engineering, or a related field.

Role: Project Manager We are currently seeking an experienced professional to join our team as a Project Manager. This role involves leading complex programs, managing large-scale IT projects, ensuring stakeholder alignment, and delivering business transformation across technology teams. You will be a key figure in shaping the strategic direction and ensuring seamless execution across various programs. Key Responsibilities: Program Strategy and Management: Lead the program strategy and approach across multiple projects or activities, gaining stakeholder buy-in for plans, commitments, and changes. Break down complex business requirements into epics and user stories, ensuring minimal cross-product coordination for technology teams. Governance and Stakeholder Management: Manage delivery, governance, and reporting to stakeholders, including product owners and leadership within technology. Promote the use of methodologies like Agile, Scrum, Kanban, and Lean within technology teams. Align technology programs with HSBC s strategic objectives and contribute to their realization. Program and Budget Management: Oversee program budgets, including headcount and software delivery capitalization. Manage third-party technology supplier negotiations and service agreements. Guide the development and promotion of the technology portfolio and project management practices. Risk and Reporting: Report progress, issues, dependencies, and risks to relevant committees, influencing decision-making to ensure continued delivery and benefits realization. Ensure proper controls, procedures, and quality assurance processes are in place for the product, aligning with the Business Transformation Framework and HSBC Risk and Controls frameworks. Operational Planning and Risk Mitigation: Establish management procedures to ensure adherence to policies and effectively manage operational risks. Contribute to strategic plans, shaping them into actionable operational objectives. Proactively manage the program roadmap, adjusting for changes while keeping stakeholders focused on agreed outcomes. Ensure 100% compliance by obtaining senior management buy-in on budget, schedule, scope, risk mitigation, and contingency plans. Project Tracking and Issue Resolution: Track project risks and issues, planning mitigation strategies and aligning service remediation with program delivery plans. Collaborate with platform heads to ensure scope, budget, and quality commitments are met within the specified timelines. Requirements: Certifications: PMP and CSM certifications are required. Experience: Extensive experience managing complex IT projects and programs across both business and technology functions. Proven experience in leading large-scale technology transformations using Agile and Waterfall methodologies. Expertise in managing multiple projects, balancing scope, budget, risks, and timelines. Skills: Strong leadership and influencing skills, with the ability to manage senior stakeholders and cross-functional teams. Excellent communication and interpersonal skills to facilitate effective collaboration with business stakeholders, technology teams, and third-party suppliers. Financial management expertise with the ability to negotiate with suppliers and vendors. Strategic & Operational Planning: Ability to coordinate the program roadmap and ensure alignment with strategic objectives. Experience proactively managing project risks and resolving issues. At HSBC, we offer more than just a job we provide a platform for you to build your career and fulfill your potential. You ll be part of a global organization that offers ample growth opportunities, a collaborative work culture, and flexible working arrangements. If you re ready to take your career to the next level, HSBC is the place for you.

Role Overview The Assistant Manager, Sourcing is based at our ISO 9001-certified Chakan, Maharashtra facility, supporting the Analytical Instrument Group. This facility provides solutions for Chromatography, Spectrometry, Liquid Handling, and Environmental Process Monitoring customers. The role involves driving supplier management processes to meet company objectives, collaborating with cross-functional teams, developing sourcing strategies, negotiating contracts, and managing preferred supplier relationships. Key Responsibilities Sourcing and Procurement Manage the Procurement-to-Pay (P2P) process, ensuring seamless operations. Develop and refine sourcing strategies to meet business requirements. Negotiate pricing and supply contracts, ensuring value for money while protecting company interests. Supplier and Inventory Management Handle supplier management processes, ensuring alignment with company objectives. Collaborate with marketing and operations to manage inventory and supply demands against forecasts. Monitor inflation, sourcing savings, and Purchased-Part Variances (PPV) to meet operational goals. Cross-Functional Collaboration Work closely with project teams to ensure timely delivery of materials and sourced products. Participate in New Product Development & Introduction (NPDI) teams to secure necessary materials and vendor contracts. Market Intelligence and Reporting Monitor market trends and refine buying plans based on insights. Provide regular updates to internal stakeholders on sourcing performance and market dynamics. Education and Experience Education: Bachelor s degree in Electronics (required). Master s degree in Supply Chain Management (preferred). Experience: Minimum of 5 years experience in procurement/sourcing within EMS/Electronics procurement in a manufacturing environment. Experience in vendor development, inventory management strategies, and material planning. Additional experience in planning, manufacturing, quality, or engineering is a plus. Knowledge, Skills, and Abilities Strong understanding of buying strategies, supply chain processes, and inventory management tools. Proficient in SAP systems. Excellent communication and presentation skills. Ability to manage the import procurement process effectively. Qualification : Preferably Bachelors degree in Electronics, Masters degree in SCM will be an added advantage

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Team Lead Account Management Location: Pune Experience: 3+ years Employment Type: Full-Time About Amura Amura Marketing Technologies is a next-generation MarTech company, delivering end-to-end marketing and sales solutions to leading brands across India. Guided by the philosophy of Marketing Engineered , we blend creativity, data, and technology to craft innovative marketing strategies that drive measurable results. Role Overview We are looking for a dynamic and experienced Team Lead Account Management to lead client strategy, execution, and servicing across multiple digital projects. This role involves managing a team of account managers, driving campaign performance, and ensuring seamless coordination between internal teams and clients. You'll be responsible for delivering marketing strategies that align with client goals and deliver measurable impact. Key Responsibilities 1. Marketing Strategy & Execution Develop and implement comprehensive, data-driven marketing strategies tailored to client objectives. Ensure strategies are aligned with industry best practices and designed to drive measurable engagement and conversions. Lead full-funnel strategy development across awareness, consideration, and conversion stages. 2. Team & Project Management Manage, mentor, and guide a team of junior account managers. Allocate tasks effectively to ensure timely, high-quality project delivery. Collaborate cross-functionally with creative, content, media, and tech teams to execute campaigns efficiently. 3. Client Engagement & Servicing Act as the primary point of contact for clients, ensuring proactive communication, updates, and relationship management. Understand client briefs in depth and translate them into actionable strategies. Maintain high client satisfaction through consistent service quality and strategic value. 4. Campaign Management Oversee the execution of campaigns across multiple digital platforms. Monitor performance, troubleshoot issues, and optimize in real-time to maximize ROI. Report campaign results with insights and next steps for growth. 5. Digital Platforms & Tools Proficient in platforms such as: Google Ads & Google Analytics Meta (Facebook) Business Manager Demand-Side Platforms (DSPs) and programmatic advertising tools Ability to leverage analytics tools to inform campaign performance and optimization. Must-Have Skills Strong command of full-funnel marketing strategies and their implementation. Proven expertise in performance marketing, including ROI optimization and attribution modeling. Ability to conceptualize and execute impactful marketing campaigns. Experience translating strategy into operational execution with a focus on timelines and outcomes. Strong communication and leadership skills with the ability to liaise between clients and cross-functional teams. Desired Qualifications & Experience Minimum 3 years of experience in digital marketing and account management, preferably in an agency setting. Prior experience in client strategy, servicing, and project management. Hands-on experience managing a team of 6 or more people. Ability to manage multiple projects simultaneously in a fast-paced environment. Strong analytical mindset with the ability to turn data insights into actionable strategies. Excellent interpersonal and decision-making skills with a high degree of ownership. Who You Are You thrive in a fast-paced, high-growth environment. You re a strategic thinker with attention to detail and a drive for results. You take ownership, stay proactive, and are relentless in project execution. You re a natural leader, a strong communicator, and a team player. You enjoy solving problems, learning new tools, and contributing to a dynamic work culture. Apply now and join Amura in shaping the future of marketing.

Project Leader Location: Pune Experience: 4 7 Years Education: B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields Job Summary We are seeking a Project Leader with a strong background in embedded software development, preferably within the automotive domain, to lead and coordinate multiple software projects. This role requires a balance of technical proficiency and leadership capabilities to manage teams, ensure compliance with industry standards, and deliver high-quality embedded solutions on time. Key Responsibilities Lead and coordinate multiple embedded software projects from inception through completion. Ensure project timelines, milestones, and deliverables are met in accordance with customer and internal expectations. Guide teams through the Software Development Life Cycle (SDLC) following standards such as ASPICE, CMMI, or equivalent. Participate in embedded software development using languages such as C, C++, or Python. Ensure adherence to quality, safety, and cybersecurity standards including: AUTOSAR (Automotive Open System Architecture) ISO 26262 (Functional Safety) ISO 21434 (Cybersecurity) Apply problem-solving and analytical thinking to address technical challenges. Foster collaboration among cross-functional teams including software, hardware, and testing. Maintain clear documentation and communication with internal stakeholders and clients. Required Skills & Experience 4 7 years of experience in embedded software development, with leadership exposure. Strong command over programming languages: C, C++, or Python (at least one). Hands-on experience with SDLC and process compliance to ASPICE, CMMI, or similar standards. Experience in software testing methods, including unit, integration, and system testing. Knowledge of AUTOSAR, ISO 26262, and ISO 21434 standards. Strong problem-solving and analytical skills. Excellent organizational, communication, and coordination abilities. Preferred / Added Advantage Certified Scrum Master (CSM) or equivalent Agile certifications. Experience in the automotive domain (strongly preferred). Exposure to project coordination tools like Jira, Confluence, or similar platforms. Be a part of high-impact embedded projects in the automotive and industrial sectors. Work in a collaborative, innovation-driven culture with global exposure. Accelerate your career with leadership responsibilities and domain expertise. Competitive compensation and professional development opportunities. Qualification : B.E / B.Tech / M.E / M.Tech in Electronics, Computer Science, or related fields

Assistant Manager PMG (Project Management Group) Location: Pune Head Office Company: Gera Developments Pvt. Ltd. Experience: 7+ Years Industry: Real Estate / Construction Function: Project Management & Planning Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a leading name in real estate with a legacy of innovation, quality, and excellence. With landmark projects across Pune, Goa, and Bangalore, we are redefining spaces that elevate lifestyle and living standards. We believe in pushing boundaries, whether it s through our pioneering child-centric homes or technologically advanced workspaces. Role Overview: As an Assistant Manager PMG, you will play a critical role in project monitoring, design coordination, schedule adherence, and cross-functional alignment. You will act as a key interface between the planning, design, and execution teams to ensure timely project delivery and smooth coordination across all phases. Key Responsibilities: Project Schedule Monitoring: Review overall project timelines and provide actionable inputs to the planning team. Track deliverables and raise alerts on any deviations or delays. Design Coordination: Monitor the design delivery schedule and escalate concerns proactively. Act as a liaison between design consultants and internal stakeholders. Stakeholder Engagement: Attend weekly project meetings to understand ongoing challenges and coordinate resolutions. Maintain strong follow-ups with key project stakeholders to ensure alignment and progress. Site Interface: Conduct regular site visits to assess progress and support in resolving execution challenges. Communicate on-ground realities to the HO for timely decision-making. Execution Support: Assist the execution team during the handover stage, ensuring management support is available for swift resolution and closure. Requirements: Education: Bachelor's Degree in Civil Engineering (Mandatory) Experience: Minimum 7 years of total experience At least 4 5 years in project planning or coordination roles Exposure to design coordination will be an added advantage Technical Skills: Proficient in MS Office (Word, Excel, PowerPoint) Understanding of construction workflows, timelines, and project lifecycle Soft Skills: Excellent communication and interpersonal skills Strong follow-up and coordination abilities A go-getter attitude with a collaborative and problem-solving mindset Ability to work across functions and lead through influence Work with a forward-thinking real estate brand Exposure to industry-best practices in project delivery and design execution Be part of a culture that encourages learning, innovation, and ownership Qualification : Bachelor's Degree in Civil Engineering (Mandatory)

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Receptionist cum Administrative Executive Location: Pune Experience: 3 7 years Education: Any Graduate Job Type: Full-Time Job Overview We are seeking a highly organized and professional Receptionist cum Administrative Executive to manage our office front desk and provide administrative support. The ideal candidate will be the first point of contact for guests, customers, and employees, while also handling various administrative tasks such as travel booking, vendor management, and office operations. Key Responsibilities Reception & Front Desk Management: Maintain a neat and well-organized reception area. Greet guests, customers, and employees with professionalism and courtesy, directing them to the appropriate person or department. Manage and route incoming phone calls effectively. Provide excellent customer service by addressing inquiries and resolving issues promptly to ensure a positive experience for all visitors and callers. Handle mail and deliveries by receiving, sorting, and distributing them accurately. Manage office security by following safety procedures, controlling access via the reception desk, and issuing visitor badges. Administrative Support: Monitor office supplies inventory and ensure timely procurement within budgetary constraints. Gather, compile, and prepare data for necessary reports as needed. Maintain accurate filing and documentation. Ensure compliance with company policies and procedures in daily operations. Coordinate internal meetings and office events, including contacting employees for event participation. Manage employee leave and attendance records. Facility & Vendor Management: Coordinate travel bookings (domestic and international) for employees. Oversee facility maintenance activities and manage vendors (e.g., electricians, cleaners). Coordinate courier deliveries, ensuring proper tracking and timely receipt. Ensure basic cleanliness and hygiene of office premises. Other Responsibilities: Provide general administrative support to all teams as requested. Work closely under the guidance of the Manager to support day-to-day office functions. Skill Requirements Minimum 3 years of experience in an administrative or receptionist role. Graduation or Diploma in any relevant field. Proficient in MS Office Suite, particularly MS Word and MS Excel. Familiarity with office equipment like printers and fax machines. Excellent written and verbal communication skills. Strong telephone etiquette and professional demeanor. Resourceful, proactive, and able to multitask efficiently. Strong time-management and organizational skills, with the ability to prioritize tasks. Ability to propose new ideas and contribute to improving office processes. Analytical mindset with good problem-solving abilities. Qualification : Any Graduate

Job Title: Lead Engineer BIM Electrical Location: Pune Qualification: B.E. (Electrical or related field) Experience: 8 12 Years Role Overview: We are seeking an experienced Lead Engineer BIM Electrical to take full ownership of BIM-related electrical deliverables across diverse MEP projects. The ideal candidate will bring deep expertise in Revit MEP, strong coordination capabilities, and a proven track record of working on international, multidisciplinary projects. This is a leadership role focused on technical excellence, BIM implementation, and cross-functional collaboration. Key Responsibilities: Lead and manage the BIM Electrical function, ensuring high-quality modeling, coordination, and documentation across all projects. Oversee the implementation and management of BIM software tools relevant to Electrical systems. Assist project teams with BIM project setup, model configuration, and adherence to organizational standards. Support active project work including Revit MEP 3D modeling, detailing, and clash coordination. Liaise and coordinate directly with clients, consultants, and other engineering disciplines for seamless project delivery. Troubleshoot and resolve BIM design or modeling issues to maintain workflow efficiency. Develop, document, and update BIM implementation strategies, standards, and best practices. Conduct technical onboarding and training for new team members on BIM tools and workflows. Required Skills & Experience: Proven expertise in Revit MEP Electrical 3D modeling and detailing. Strong experience in BIM coordination, particularly across MEP disciplines. Exposure to international projects and understanding of global BIM standards and workflows. Experience in multidisciplinary coordination, especially in large-scale projects such as commercial, residential, mixed-use, and institutional buildings. Good understanding of 3D electrical systems, components, and layouts typically used in building projects. Strong visualization and spatial coordination skills, with the ability to work on complex architectural and MEP projects. Effective communication skills, with the ability to lead and mentor junior engineers and collaborate with cross-functional teams. Qualification : B.E. (Electrical or related field)