Supplier Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Job Title: Sub Category Manager Procurement Location: Pune Department: Tender Management / Procurement Function: Procurement & Vendor Development Experience: Minimum 5 Years Education: BE / B.Tech (Engineering Any Specialization) Working Language: English Employment Type: Full-Time Position Overview We are seeking a Sub Category Manager Procurement with strong expertise in vendor sourcing and strategic vendor development. This role is critical in building and managing a high-performing supplier base, ensuring cost efficiency, quality compliance, and timely procurement across categories such as MEP, HVAC, civil, electrical, and safety equipment. The ideal candidate brings a balance of strategic thinking and hands-on execution in procurement operations, vendor negotiation, rate contract management, and cross-functional coordination. Key Responsibilities Vendor Sourcing & Profiling Identify and onboard vendors across categories including MEP, HVAC, civil, electrical, and R&M. Conduct market research and benchmarking to source cost-effective and high-quality suppliers. Perform vendor due diligence ensuring compliance with organizational standards and regulatory norms. Strategic Vendor Development Build and nurture long-term, strategic vendor relationships. Define and track vendor performance metrics (KPIs) and initiate performance improvement actions. Align vendors with organizational objectives through structured reviews and feedback loops. Procurement Strategy & Execution Lead rate analysis, cost negotiations, and value engineering initiatives. Manage Annual Rate Contracts (ARCs) for key categories like safety gear, pumps, HVAC, and consumables. Develop customized procurement solutions and spares for site-specific requirements. Operational Coordination & Compliance Collaborate with site teams for BOQ clarification, amendments, and procurement issue resolution. Manage procurement transactions and approvals via the SAP-MM module. Facilitate vendor site visits (recce) for accurate scoping and quotation preparation. Reporting & Analysis Generate MIS reports, comparative cost analyses, and vendor performance summaries. Track and optimize procurement turnaround times (TAT) for all categories under management. Key Qualifications & Skills Technical Expertise Deep knowledge of procurement categories like MEP systems, HVAC, safety, civil works, and consumables. Strong understanding of procurement life cycle, sourcing strategies, and material specifications. Vendor Management Proficiency in vendor negotiation, onboarding, assessment, and relationship management. Experience developing vendors for integrated facility management (IFM) or large-scale real estate/infrastructure projects is an advantage. Soft Skills Strong coordination and communication skills across vendors and cross-functional internal teams. Ability to thrive under pressure and deliver within tight timelines. Preferred Industry Background Residential complexes, commercial offices, malls, industrial parks, or integrated facility management (IFM) sectors. Core Competencies Strategic Thinking & Problem Solving Cost Optimization & Commercial Acumen Attention to Detail & Quality Assurance Innovation & Process Improvement Qualification : BE / B.Tech (Engineering Any Specialization)

About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a global leader in kitchen and laundry appliances, dedicated to improving life at home for families around the world. With a commitment to purposeful innovation and an iconic brand portfolio including Whirlpool, KitchenAid, Maytag, Consul, Brastemp, Amana, Bauknecht, JennAir, Indesit, and InSinkErator we combine cutting-edge technology with decades of expertise. In 2023, we reported approximately $19 billion in annual sales, supported by 59,000 employees and 55 manufacturing and technology research centers globally. Learn more at WhirlpoolCorp.com. About the Team Our Quality Assurance team plays a critical role in ensuring the highest product standards for our customers. This team works closely with suppliers to maintain quality, improve processes, and resolve issues quickly and effectively. From new product launches to ongoing supplier development, we partner with internal teams and external suppliers to drive a culture of excellence. About the Role As a Supplier Quality Engineer/Manager, you will be responsible for ensuring the performance and quality of direct material suppliers across Asia and IPO supply chains. You will lead new product integration (NPI) and existing product improvements (EPI) by driving supplier development processes, solving escalated quality issues, and collaborating closely with global teams. Your work will directly impact the quality and reliability of Whirlpool products delivered to millions of homes. Key Responsibilities Partner with suppliers to ensure flawless new product launches. Lead supplier quality processes for NPI and EPI projects, including APQP (Advanced Product Quality Planning) and PIQ (Purchase Item Qualification). Drive supplier performance improvement initiatives through data analysis, root cause identification, and action planning. Manage and resolve escalated quality issues through structured problem-solving processes like 8D. Conduct supplier process audits and risk assessments to identify improvement opportunities. Collaborate with global cross-functional teams to align supplier quality processes and ensure consistency. Provide training to suppliers on Whirlpool s quality systems, tools, and expectations, fostering a Zero Defect culture. Track, analyze, and report on supplier performance metrics such as SIR, PPM, and CAL. Participate in supplier qualification reviews and witness critical sample builds during new product launches. Champion Critical Parameters Management (CPM) to ensure focus on key product characteristics that impact performance and customer satisfaction. Education: Bachelor s degree in Mechanical Engineering (or related field). Experience: 7-10 years in Supplier Quality within Automotive, Home Appliances, or Consumer Durables industries. Technical Skills: Strong understanding of quality tools like APQP, PPAP, FMEA, SPC, MSA. Proficient in data analysis and statistical process control (SPC). Experience working directly with suppliers on quality improvement and new product launches. Certifications (Preferred): Six Sigma Green/Black Belt. Certified Quality Management Systems (QMS) Auditor. Soft Skills: Strong communication and relationship-building skills. Ability to collaborate across cultures and global teams. Analytical mindset with a proactive approach to problem-solving. Passion for driving quality excellence and continuous improvement. Work for a globally recognized Fortune 500 company. Collaborate with talented professionals from around the world. Be part of an innovative environment that values bold ideas and smart solutions. Enjoy a diverse and inclusive workplace where your voice matters. Contribute directly to products that improve life at home for millions. If you are passionate about quality, thrive in a collaborative environment, and are ready to drive supplier excellence in a globally respected organization, apply today! Qualification : Bachelors degree in Mechanical Engineering (or related field).

Tactical Buyer Location: Pune Experience: 4 6 Years Department: Purchase / Procurement Education: Graduate / Diploma / Engineering (preferred) Key Tools: SAP, MS Excel Job Summary We are seeking an experienced Tactical Buyer to manage the procurement of services and plant-related requirements through effective sourcing, negotiation, and vendor management. The role requires hands-on experience with the P2P cycle, SAP, and the ability to manage a diverse range of service categories across admin, plant utilities, and annual maintenance contracts. Key Responsibilities 1. Procurement Process Management Handle the end-to-end P2P cycle, from PR to PO and payment follow-up. Coordinate with internal stakeholders to understand technical specifications and scope of work. Identify potential vendors and float RFQs (Request for Quotation). Negotiate for cost optimization, extended credit terms, and favorable contract conditions. Create and analyze commercial comparison sheets. Obtain necessary approvals via digital portals as per Delegation of Authority (DoA). Ensure timely PO issuance, GRN/Service Entry, and vendor payment follow-up. 2. Category Ownership Responsible for sourcing and procurement of: Admin Services: Canteen, housekeeping, gardening, OHC, health check-ups. Hospitality: Corporate events, offsite get-togethers, celebrations. AMCs & Services: Calibration, pest control, environmental monitoring, equipment maintenance. Utilities: HVAC, fire fighting systems, ETP/STP, RO plants, cranes, forklifts, waste disposal. Plant & Facility Maintenance Services 3. Tools & Process Efficiency Utilize SAP for PR/PO creation and tracking. Maintain data and comparisons in MS Excel. Use e-Auction/Online Procurement portals where applicable. Ensure alignment with internal procurement policies and compliance requirements. Skills & Competencies In-depth knowledge of procurement operations and service sourcing. Strong negotiation and vendor management capabilities. Proficient in SAP (MM module) and Excel-based analysis. Ability to manage multiple priorities and stakeholders. Strong communication and documentation skills. Qualification : Graduate / Diploma / Engineering (preferred)

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Position: Plant Quality Manager Level 3 Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we lead the way in sustainable and advanced mobility technologies. As the world s 7th largest automotive supplier, we employ over 157,000 people in 43 countries, driving innovation in clean mobility, vehicle interiors, and smart technologies. Our mission is to deliver high-performance, environmentally responsible solutions that make mobility safer, more comfortable, and more connected. Your Mission As Plant Quality Manager, you will lead the implementation and execution of quality systems at the plant level, ensuring compliance with FORVIA s standards and customer requirements. You will play a pivotal role in driving continuous improvement, managing customer relationships, and ensuring quality excellence across all plant operations. Key Responsibilities Customer Focus: Act as the voice of the customer within the plant to ensure all expectations and requirements are met or exceeded. Quality Leadership: Define plant-level quality objectives and KPIs, track progress, and implement corrective and preventive actions as needed. System Compliance: Ensure the plant s Quality Management System aligns with the Faurecia Excellence System (FES), including adherence to relevant standards (IATF 16949, ISO 9001, etc.). Team Development: Structure, lead, and develop the plant quality organization to support operational needs and strategic objectives. Process Ownership: Monitor and improve quality processes, conduct audits, and manage risk across production, logistics, and engineering functions. Issue Resolution: Take proactive steps to stop production or delivery if quality risks are identified ensuring product integrity and customer satisfaction. Supplier Collaboration: Partner with Purchasing and Supplier Quality teams to resolve supplier-related quality issues and improve supplier performance. Regulatory Compliance: Ensure the plant complies with all applicable environmental, safety, and regulatory requirements. Performance Reporting: Maintain quality records and documentation, and report quality results to internal and external stakeholders. Your Profile Education & Experience Bachelor s degree in Engineering (Master s preferred). Minimum 5 years of experience in manufacturing, preferably within the automotive industry. Proven experience in managing customer relationships and leading cross-functional teams. Technical Competencies Strong knowledge of production quality systems and methodologies (e.g., APQP, PPAP, FMEA, 8D). Process-driven approach with a focus on root cause analysis and continuous improvement. Working knowledge of industry standards (IATF 16949, ISO 14001, ISO 45001, etc.). Soft Skills Strong leadership, communication, and decision-making abilities. Effective collaborator across departments and with external partners. Bi-lingual preferred (English required; French or German is a plus). High integrity with a commitment to FORVIA s ethical standards and management principles. Impactful Work: Contribute to the advancement of sustainable automotive technologies. Global Career Path: Access a world of opportunities across 40+ countries. Continuous Learning: Benefit from over 22 hours of annual training through FORVIA University and five global campuses. Diverse Culture: Thrive in a multicultural, inclusive environment that celebrates diversity and global collaboration. Sustainability Commitment: Join a company recognized as the first global automotive group certified by the SBTi Net-Zero Standard, with a clear commitment to reach CO Net Zero by 2045. We re more than a technology company we re a movement towards smarter, safer, and more sustainable mobility. Whether it s through clean powertrains, smart interiors, or circular economy initiatives, we are helping shape the future of transportation. Join us in making a lasting impact, not just in the automotive world, but for society as a whole. Qualification : Bachelors degree in Engineering (Masters preferred)

Position: Plant PC&L Supervisor Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA FORVIA is at the forefront of automotive innovation, delivering smart, safe, and sustainable mobility solutions. As the world s 7th largest automotive supplier, we employ over 157,000 people across 43 countries. Our work is found in 1 out of every 2 vehicles globally. We are committed to pioneering change in clean mobility, vehicle interiors, electronics, and lifecycle solutions. Your Mission As a Plant PC&L Supervisor, you will oversee internal logistics operations from the receipt of materials to the shipment of finished goods. Your role is critical in ensuring smooth, efficient material flow throughout the plant, supporting production demands, and maintaining high standards of operational excellence. Key Responsibilities Internal Logistics & Material Flow Ensure timely and accurate delivery of materials to production lines using internal transport systems (e.g., small trains). Oversee unloading of incoming materials and maintain a clean, organized warehouse and stocking areas. Track supplier delivery performance and manage alert systems in picking zones to address discrepancies. Customer Delivery & Outbound Logistics Monitor and manage sequencing operations to ensure timely and accurate customer deliveries. Supervise the preparation and loading of finished goods, ensuring compliance with customer requirements. Track shipment status, communicate any delivery failures, and contribute to the reduction of Misdeliveries per Million (MPM). Logistics Operations & Systems Implement and maintain logistics fundamentals such as traceability, booking systems, labeling, and container management. Apply and reinforce First In, First Out (FIFO) practices with proper visual and physical control systems. Team & Resource Management Organize and allocate manpower and equipment to meet production and logistics needs. Lead, train, and coach a team of logistics operators to achieve high levels of performance and engagement. Continuous Improvement Identify and implement process improvements to increase productivity and efficiency within logistics operations. Your Profile Education Graduate in any discipline (logistics, supply chain, or related fields preferred). Experience 5 to 8 years of experience in production or logistics within an industrial or manufacturing environment, preferably automotive. Skills & Competencies Strong understanding of logistics principles and systems (MRP, FIFO, MPM). Proven leadership and team management capabilities. Strong communication, organizational, and problem-solving skills. Focus on operational efficiency, customer satisfaction, and continuous improvement. Global Career Opportunities: With operations in 43 countries, career mobility and growth are part of the journey. Learning & Development: Access to FORVIA University with more than 22 hours of annual training, online and on-site. Inclusive & Diverse Culture: We promote diversity through inclusive hiring, global collaboration, and gender equity goals. Sustainability Commitment: As the first global automotive group certified under the SBTi Net-Zero Standard, we aim to achieve CO Net Zero by 2045, guided by the principles of use less, use better, and use longer. Innovation-Driven Work: Be part of a team that s shaping the future of mobility through advanced technologies and digital transformation. Be a Part of Something Bigger Join FORVIA and play an essential role in driving efficient, sustainable, and high-performing logistics that power the future of automotive mobility. Qualification : Graduate in any discipline (logistics, supply chain, or related fields preferred)

Position: Supply Chain Senior Engineer Location: Pune Reports To: Assistant General Manager Supply Chain Educational Qualification: B.E. Mechanical / Industrial Production Experience: 4 7 years Purpose of the Role To ensure timely and efficient procurement of materials in alignment with production needs, while maintaining optimum inventory levels and driving operational excellence across the supply chain. Key Responsibilities Procurement & Inventory Management Release purchase orders and manage end-to-end procurement activities in line with ERP processes. Monitor material availability to meet production schedules while avoiding overstock and stockouts. Implement engineering changes with minimal impact on inventory, obsolescence, and scrap. Stakeholder Communication & Coordination Liaise with suppliers, service providers, and internal departments to ensure smooth material flow. Build and maintain strong, reliable supplier relationships. Escalate unresolved issues to the reporting manager in a timely manner. Compliance & Process Adherence Follow standard operating procedures (SOPs) and organizational protocols rigorously. Ensure adherence to company guidelines on sourcing processes, compliance, and ethical conduct. Key Skills & Competencies Proficient in managing A-Class procurement, including local and imported long-lead items. Strong knowledge of ERP systems and digital procurement tools. Understanding of manufacturing processes and production planning. Familiarity with supply chain principles like cycle time, lead time, JIT, Kanban, push/pull systems. Effective communication and interpersonal skills for internal and external coordination. Strong organizational and planning abilities with a problem-solving mindset. Qualification : B.E. Mechanical / Industrial Production

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Role Overview The Assistant Manager, Sourcing is based at our ISO 9001-certified Chakan, Maharashtra facility, supporting the Analytical Instrument Group. This facility provides solutions for Chromatography, Spectrometry, Liquid Handling, and Environmental Process Monitoring customers. The role involves driving supplier management processes to meet company objectives, collaborating with cross-functional teams, developing sourcing strategies, negotiating contracts, and managing preferred supplier relationships. Key Responsibilities Sourcing and Procurement Manage the Procurement-to-Pay (P2P) process, ensuring seamless operations. Develop and refine sourcing strategies to meet business requirements. Negotiate pricing and supply contracts, ensuring value for money while protecting company interests. Supplier and Inventory Management Handle supplier management processes, ensuring alignment with company objectives. Collaborate with marketing and operations to manage inventory and supply demands against forecasts. Monitor inflation, sourcing savings, and Purchased-Part Variances (PPV) to meet operational goals. Cross-Functional Collaboration Work closely with project teams to ensure timely delivery of materials and sourced products. Participate in New Product Development & Introduction (NPDI) teams to secure necessary materials and vendor contracts. Market Intelligence and Reporting Monitor market trends and refine buying plans based on insights. Provide regular updates to internal stakeholders on sourcing performance and market dynamics. Education and Experience Education: Bachelor s degree in Electronics (required). Master s degree in Supply Chain Management (preferred). Experience: Minimum of 5 years experience in procurement/sourcing within EMS/Electronics procurement in a manufacturing environment. Experience in vendor development, inventory management strategies, and material planning. Additional experience in planning, manufacturing, quality, or engineering is a plus. Knowledge, Skills, and Abilities Strong understanding of buying strategies, supply chain processes, and inventory management tools. Proficient in SAP systems. Excellent communication and presentation skills. Ability to manage the import procurement process effectively. Qualification : Preferably Bachelors degree in Electronics, Masters degree in SCM will be an added advantage

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Senior Analyst TReC Costing Location: Pune, India Company: FORVIA (Faurecia Interior Systems) About FORVIA FORVIA is a global leader in automotive technology, focused on delivering innovative and sustainable mobility solutions. As the 7th largest global automotive supplier, we are shaping the future of mobility with over 157,000 employees in 43 countries. Your Mission As a Senior TReC Costing Analyst, you will be responsible for calculating and managing tooling reference costs for FORVIA Interior Systems programs. You will play a key role throughout the acquisition and development phases, working closely with cross-functional teams to ensure accurate, competitive, and optimized tooling cost estimations aligned with our program and business goals. Key Responsibilities Acquisition Phase Define the complete tooling package (in-house, bought-out parts, and assembly tools) per Program Management System (PMS) guidelines. Analyze the Bill of Materials (BOM) and process flow charts to build a detailed tooling list. Develop tooling concepts using CAD models, 2D drawings, and technical visuals (e.g., tool movements, inserts, cavities). Estimate tooling costs in alignment with the Tool & Equipment (T&E) strategy. Apply defined tooling margins and create pricing summaries in customer-specific (OEM) templates. Present and distribute cost breakdowns to internal stakeholders (Program Managers, T&E Buyers, etc.). Update and refine cost estimates across acquisition rounds, collaborating with Customer Business Units (CBUs). Contribute ideas to enhance FORVIA's competitiveness in project quotations. Development Phase Support Engineering and T&E Buyers with cost estimates for Engineering Change Requests (ECRs). During tooling RFQ (Request for Quotation) phases, calculate target costs based on part designs, technical specifications (IDS), and T&E strategies. Compare supplier cost breakdowns with TReC estimates during SNC (Supplier Nomination Committee) phases. Analyze gaps and provide justification or negotiation support to the Purchasing team. Maintain costing data for traceability and knowledge sharing post-nomination. Support tooling cost targets for engineering or program design changes. Cross-functional Collaboration Work closely with: CBU Cost Analysts (for both in-house and BOP parts), Central Costing Teams (to evolve TReC methodology), Global teams to ensure cost competitiveness and process alignment. Contribute to continuous improvement within the costing function by proposing innovative ideas and solutions. Your Profile Education & Experience Bachelor s or Master s degree in Engineering, or Diploma in Tool & Die Design. 6 10 years of experience in industrial environments, including exposure to production, tooling, or manufacturing engineering. Technical Skills Deep understanding of Injection Molding tools, post-processing tools (e.g., plastic welding, gauges, covering), and assembly processes. Familiarity with interior automotive components such as instrument panels, door panels, and center consoles. Knowledge of various supplier technologies is an advantage. Proficiency in interpreting CAD data and 2D technical drawings. Soft Skills Strong communication, analytical, and problem-solving abilities. Ability to synthesize complex technical data into actionable insights. Comfortable working cross-functionally and across international teams. Fluent in English (mandatory); basic knowledge of French or German is a plus. Global Impact: Work with a top-tier automotive supplier on industry-defining technologies. Innovation & Growth: Collaborate on high-impact projects and develop your career in a dynamic, global environment. Learning Culture: Access cutting-edge training through FORVIA University. Sustainability Leadership: Join a company committed to CO2 Net Zero and certified under the SBTi Net-Zero Standard. Inclusive Workplace: Thrive in a diverse, multicultural team that values collaboration and continuous improvement. Qualification : Bachelors or Masters degree in Engineering, or Diploma in Tool & Die Design

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Position: Senior Engineer Mould Design Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 5 7 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of plastic injection moulded components for the automotive and other engineering industries. With a strong focus on precision, innovation, and quality, we deliver components that meet global industry standards. Position Overview We are looking for an experienced and technically skilled Senior Engineer Mould Design to independently manage and lead mould design projects. The ideal candidate should be proficient in design software, possess a deep understanding of mould design principles, and be capable of guiding junior team members. This is a key role in ensuring high-quality, manufacturable designs for plastic injection moulds. Key Responsibilities Independently design injection moulds using Siemens NX and AutoCAD. Interpret and analyze customer drawings and requirements accurately. Apply GD&T (Geometric Dimensioning and Tolerancing) standards in design. Perform basic design analysis to validate functionality and manufacturability. Provide technical guidance and mentorship to junior team members. Ensure designs are aligned with machining and mould assembly feasibility. Collaborate with cross-functional teams including tooling, production, and quality. Maintain design documentation and ensure adherence to project timelines. Communicate effectively with internal and external stakeholders. Qualifications & Experience Diploma in Tool & Die / Post Diploma in Tool Design. 5 to 7 years of relevant experience in plastic injection mould design. Key Skills Proficiency in Siemens NX and AutoCAD. Strong knowledge of mould manufacturing processes, machining, and assembly. Thorough understanding of GD&T and engineering drawing standards. Ability to analyze and solve design-related issues. Effective communication, leadership, and team collaboration skills. Strong organizational skills and attention to detail. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). At RENATA, you ll work in a technologically advanced and growth-oriented environment alongside experts in design and engineering. We offer structured career development, challenging projects, and the opportunity to contribute to high-precision manufacturing in the automotive sector.

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Description: Power Platform Developer (Supply Chain Focus) The successful candidate will join the Supply Chain team to create, configure, design, and maintain applications to support business functions in the procurement of goods, products, and services utilizing MS PowerApp, Power Automate, Dataverse, Power BI and Power Virtual Agents and integrating with various data sources, including SharePoint, Excel, SAP, Azure Data Lake, etc. Business experience in Supply Chain and Procurement is a plus. Microsoft Power Platform Expertise Demonstrate extensive experience in MS PowerApps, MS Power Automate, Power BI, and Power Virtual Agents. Integration and Data Source Management Implement solutions with multiple data sources, including SharePoint Online Lists, Teams, Dataverse, Excel, and external systems (SAP, ServiceNow). Hands-on experience designing databases with Dataverse and extensive experience with SQL. Experience with API and service integrations. Develop custom connectors for Microsoft Power Platform to enhance functionality. Solution Design, Deployment and Support Collect requirements, design, implement and deploy solutions on MS Power Platform. Produce architectural diagrams and design documents. Provide application support. Communication and Collaboration Excellent communication skills in English. Collaborate effectively with stakeholders, senior-level personnel and team members to ensure project success. Assist in providing training and producing documentation. Azure DevOps (ADO) and Agile Methodology Experienced with Agile methodology and Azure DevOps (ADO). Good organization skills to balance and prioritize work to accomplish assigned tasks and projects. Team Management and Mentoring Efficiently manage backlog and workload for self and team members. Act as a senior developer and architect, providing mentorship to other team members. Results-Oriented and Independent Work Demonstrate a results-oriented approach, delivering high-quality solutions. Work with minor supervision, taking ownership of projects and tasks. Technical Experience PowerPlatform, Power Automate Flow, Power App, Dataverse, PowerPlatform Pipeline, Power BI, APIs, PowerShell, SharePoint, SharePoint 2013 Workflow, InfoPath, UX/UI, JavaScript, AEM, HTML, CSS, SQL, Excel, Azure Datalake. Qualifications 8+ years of relevant work experience. Bachelor's degree or equivalent combination of education and experience. Excellent communication skills in English. Proficiency in developing apps in MS Power Platforms. Very good analytical and problem-solving skills. Extensive experience creating system designs, architecture diagrams and training documentation. You must have the ability to be a self-motivated individual to learn new technology and solutions. Ability to work independently and as part of a team. Experience with Agile methodology and Azure DevOps (ADO) Experience managing the prioritization of workload for a team. Experience working with procurement practices. Has sufficient depth and breadth of technical knowledge to be individually responsible for the implementation of a specific deliverable. Good personal computer and business solutions software skills. Qualification : Bachelor's degree or equivalent combination of education and experience.

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Position: Innovation Technical Leader Location: Pune Company: FORVIA A Global Leader in Sustainable Mobility About FORVIA At FORVIA, we pioneer innovative technologies that shape the future of mobility delivering solutions that matter to people worldwide. As the 7th largest automotive supplier, we combine deep expertise in electronics, clean mobility, lighting, interiors, and seating to drive sustainable transformation across the automotive industry. Your Mission As an Innovation Technical Leader, you will lead breakthrough innovation projects from concept through validation, ensuring alignment with FORVIA s innovation processes and business goals. You will be responsible for managing project plans, technical targets, resources, risk mitigation, and internal and external communications including intellectual property protection and OEM engagement. Key Responsibilities Project Leadership Drive innovation projects, defining concept, timeline, and validation steps according to innovation delivery processes. Lead projects involving breakthrough product innovations. Planning & Execution Develop and manage detailed project plans and technical objectives. Ensure all milestones and deliverables are met in line with the Innovation Project Management System (PMS). Risk & Resource Management Identify, assess, and mitigate risks related to innovation projects. Allocate resources efficiently and ensure teams have the support needed to succeed. Communication & Reporting Report project status and results at key review points (IRC, MIC, Gates). Prepare and deliver presentations following standard innovation contract requirements. Promote innovation initiatives internally to foster engagement and alignment. Intellectual Property & OEM Interaction Collaborate with the IP team to protect product designs and innovations. Interface with OEMs for product demonstrations, feedback gathering, and addressing special requirements. Cross-Functional Support Work closely with marketing to integrate business KPIs and customer insights into innovation projects. Your Profile Qualifications Master s degree in Engineering. Experience 8+ years in automotive systems, including seats, structures, and components design, testing, or manufacturing. Strong background in project management. Skills & Competencies Results-driven with a strong ability to manage ambiguity. Excellent problem-solving and decision-making skills. Leadership experience and team-building capabilities are a plus. Effective communication and presentation skills. Proficient in English. Willingness to travel as required. Quick learner and capable of directing teams. At FORVIA, you ll thrive in a fast-paced, innovative environment where your contributions help lead the automotive industry toward a sustainable future. Join a global team of passionate professionals, access extensive learning and development programs via FORVIA University, and work within a culture that values diversity, collaboration, and ethical responsibility. We are proud to be the first global automotive group certified with the SBTi Net-Zero Standard, committed to achieving CO Net Zero by 2045 through a focus on efficiency, sustainability, and circular economy principles. Be part of a global leader shaping smarter, more sustainable mobility solutions. Work on cutting-edge technologies impacting millions of vehicles worldwide. Engage in a culture of continuous learning, diversity, and inclusion. Contribute to ambitious environmental goals aligned with the Paris Agreement. Qualification : Masters degree in Engineering