Testing Procedures Jobs in Pune

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Assembly Supervisor Location: Pune Job Type: Full-Time Job Summary The **Assembly Supervisor** will **oversee the daily operations of the assembly and testing activities** in the plant. The role involves managing staff, ensuring adherence to company policies, **meeting production targets**, and ensuring that quality standards are met. The supervisor will work closely with planning, quality, and warehouse departments to ensure **timely work order completion and shipments** while fostering an environment of safety, efficiency, and **continuous improvement**. Primary Responsibilities Policy Enforcement & Compliance **Ensure that all company policies, procedures, and safety protocols (HSE) are strictly followed** by the team at all times. Staff Management & Development **Lead and coordinate the activities of the assembly staff**, including training, employee development, and performance evaluations. Set goals and objectives for the department and ensure they are met. Budget & Expenditure Management Manage the departmental budget, track expenditures, and provide **cost-effective solutions** to improve operations. Quality Control & Corrective Actions **Investigate quality rejects and implement corrective actions** as needed to maintain product quality. Collaboration **Work closely with the Planning, Quality, and Warehouse departments** to ensure the smooth functioning of the assembly shop. Ensure timely completion of work orders and shipments. Process Improvement **Continually assess departmental processes**, methods, and activities to ensure efficient use of resources, equipment, and time. KPI Monitoring & Reporting **Monitor and measure departmental KPIs** to ensure that goals are met and performance standards are maintained. Safety Compliance In collaboration with the Safety Manager, ensure that safety programs are continually improved to **reduce accident severity and frequency.** Preventive Maintenance Coordination Release equipment for preventive maintenance and work with the maintenance department to ensure that it is completed on schedule. Facility/Group Specific Responsibilities Assembly & Testing Oversight **Oversee daily assembly and testing operations** within the plant, ensuring all activities are executed according to quality and safety standards. Work Instructions & SOPs **Develop and implement Standard Operating Procedures (SOPs)** and work instructions as needed for the assembly processes. Scheduling & Timecard Management Prepare weekly and monthly build plans, schedule work, and **approve timecards** for all direct assembly staff. Leadership & Team Development **Lead and manage a team that consistently meets production deadlines.** Foster team development and create an environment conducive to individual growth and performance. Quality Assurance **Ensure that the quality of all work meets or exceeds company standards.** Promote a culture of quality awareness among staff. Safety Program Administration Work with the Safety Manager to develop and maintain safety programs, ensuring all employees adhere to safety guidelines and procedures. Equipment Maintenance Ensure that all assembly equipment is maintained and serviced regularly. Coordinate with the maintenance department for preventive maintenance tasks. Education & Experience Qualifications Education Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field with **8-10 years of experience.** B.E. in a relevant field with **6-8 years of experience.** Experience **Minimum 3 years of experience in a supervisory role** within an assembly shop. **Hands-on experience with the assembly and testing of Oil & Gas equipment**, such as API 6A valves, connectors, chokes, API 16C manifolds, API 6A BOPs, mud pumps, and fluid ends. Technical Competencies Familiarity with **ERP systems and manufacturing standards.** **Knowledge and application of ISO and API standards.** Communication Skills **Strong verbal and written communication skills in English.** Management & Analytical Skills **Strong time management, leadership, and analytical skills.** Ability to manage and prioritize multiple tasks effectively. Job Requirements Staff Supervision **Ability to lead a team of assembly personnel**, ensure timely production, and maintain a focus on safety and quality. Process Improvement **Ability to evaluate and improve departmental processes** to increase efficiency and reduce waste. Problem-Solving **Investigate and resolve issues** related to quality defects, production delays, or equipment failures. Behavioral Competencies **Lead by example, inspire team members**, and foster a positive work culture focused on performance and safety. **Excellent interpersonal and communication skills** to effectively interact with different departments, team members, and stakeholders. **Ability to identify problems and implement corrective actions efficiently.** Qualification : Diploma in Mechanical, Electrical, Production, Instrumentation Engineering, or related field

Job Title: Security Engineer Location: Pune We are looking for a skilled Security Engineer to join our Cloud Infrastructure & Security team. In this role, you will be responsible for managing and securing all aspects of e-commerce product security and compliance within the AWS cloud environment. The ideal candidate will have a strong background in application and infrastructure security, vulnerability assessment, penetration testing, and a proven track record of participating in security audits. Key Responsibilities: Lead and participate in security audits across multiple environments, including web security, application security, mobile app security, network security, and IT infrastructure security. Conduct thorough Vulnerability Assessments and Penetration Testing (VAPT) to identify and mitigate potential risks in applications, AWS resources, configurations, and IT infrastructure. Collaborate with cross-functional teams to ensure the security of the e-commerce products, proactively identifying gaps in security and implementing the necessary controls. Prepare detailed VAPT reports using predefined templates and assist in finalizing audit reports for management. Coordinate with relevant teams to ensure timely resolution of identified security issues. Create and maintain security checklists, test cases, and test scenarios to facilitate security audits and penetration tests. Implement industry-standard security controls for AWS resources, including vulnerability management and configuration hardening. Perform penetration tests on computer systems, networks, and applications, identifying weaknesses and recommending solutions. Conduct physical security assessments of systems, servers, and network devices, focusing on firewall maintenance, network security, and other critical infrastructure components. Provide regular updates to management regarding security findings, vulnerabilities, and remediation plans. Review and offer actionable feedback on information security issues, collaborating with engineering teams to ensure timely fixes. Drive improvements in security services, including hardware, software, policies, and procedures. Identify areas for enhancing security education and awareness among internal users. Stay current with the latest malware and security threats, ensuring that the security strategy is responsive to new challenges. Manage and monitor security operations with AWS, XDR/EDR, Microsoft O365 security, and SaaS-based applications. Desired Skills & Experience: 5+ years of experience in AWS application and infrastructure security, Vulnerability Assessment, and Penetration Testing. At least 2 security audits completed, with at least one audit performed in the past 12 months. Solid experience working in heterogeneous environments and specifically with AWS Cloud. Product-based company experience is a plus. Hands-on expertise with VAPT using industry-standard tools such as Qualys, Nessus, WebInspect, Acunetix, Metasploit, Burp Suite Pro, Netsparker, etc. Strong experience with Linux administration and security (hardening servers according to industry best practices). Familiarity with OWASP security requirements and experience implementing them across applications and infrastructure. Proficiency in penetration testing on web and mobile applications, cloud environments, and network infrastructures. AWS Security experience is mandatory. Experience with XDR/EDR, Microsoft O365 security, and SaaS security is highly desirable. Strong analytical skills and the ability to identify vulnerabilities and risks across platforms. Certifications: CCNA, CompTIA+, or similar; AWS Security Specialty or similar certifications are preferred. Excellent communication skills, with the ability to collaborate effectively with both technical and non-technical teams. Strong organizational skills and the ability to prioritize tasks effectively. Ability to work with a product-ownership mindset while maintaining security across all systems and applications. What We Offer: Competitive salary and benefits. A dynamic and collaborative work environment where innovation and security are top priorities. Opportunities for continuous learning and career growth in the field of cloud and cybersecurity. If you have a passion for security, experience with AWS, and want to be part of a growing team protecting critical infrastructure, apply today!

Lead Salesforce Engineer Location: Pune About Rapid7 Rapid7 is a publicly traded cybersecurity company headquartered in Boston, MA, with 17 offices around the world. As we expand our global footprint into India, we are excited to grow our internal Application Engineering team. As a Salesforce Engineer, you will work alongside a global team to deliver best-in-class Salesforce solutions that meet business needs and optimize user experiences. You will have hands-on experience with Sales Cloud, Service Cloud, Experience Cloud, and CPQ, and you ll be proficient in both declarative configurations and advanced Apex coding. This is a unique opportunity to be one of the first hires for Rapid7 in India as we support our growth strategy in a culture that encourages innovation and continuous learning. About the Role As a Salesforce Engineer, you will design, develop, and support Salesforce solutions on Sales and Service Clouds. Working closely with other Salesforce team members, application owners, IT departments, and business stakeholders, you will deliver solutions that meet both technical and business requirements. Key Responsibilities Salesforce Administration: Manage and configure Salesforce environments, including Sales Cloud, Service Cloud, and Experience Cloud. Oversee system health, user permissions, profiles, workflows, and security settings. Implement and maintain changes using declarative tools such as Process Builder, Flow, and Validation Rules. Apex Development: Write and maintain Apex classes, triggers, Visualforce pages, and Lightning Web Components (LWC). Collaborate with senior developers and architects to design scalable solutions. Troubleshoot, optimize, and debug Apex code to ensure performance and stability. Unit Testing: Develop and maintain unit tests for custom Apex code, ensuring test coverage aligns with Salesforce best practices. Conduct comprehensive testing of code changes and strive for zero defects while optimizing test performance. CPQ (Configure, Price, Quote): Configure and manage Salesforce CPQ features, including price books, quote templates, products, and pricing rules. Troubleshoot CPQ-related issues and provide support for streamlining the quoting process. Collaboration and Support: Work with business analysts and other team members to gather requirements and deliver solutions. Maintain comprehensive documentation for configurations, workflows, code, and other technical solutions. Release Management: Utilize Gearset for deployment and release management, ensuring smooth Salesforce code and configuration deployments across multiple environments. Plan, execute, and document deployment processes, ensuring error-free releases through automated validation and rollback strategies. Jira Integration and Task Management: Use Jira for task management, project tracking, and collaborating on development sprints. SOX Controls & Change Management: Adhere to SOX controls to ensure compliance with IT regulations and auditing standards. Follow change management policies and procedures for implementing configurations, scripts, and integrations, ensuring all changes are properly tested, documented, and approved. Skills and Qualifications Experience & Certifications 8+ years of hands-on experience with Salesforce Sales Cloud, Service Cloud, Experience Cloud, and CPQ. Salesforce Certifications (ADM 201, ADM 211, Platform Developer I and II) are highly desirable. Strong experience with Salesforce integrations, APIs, and external systems. Experience using Jira for task and project management in an Agile environment. Hands-on experience with Gearset for deployment and release management in Salesforce. Technical Skills Expertise in Apex, Visualforce, Lightning Web Components (LWC), SOQL, and SOSL. Strong knowledge of Salesforce CPQ features and pricing rule configuration. Ability to write efficient, scalable unit tests for custom Apex code. Familiarity with Git and version control practices. Soft Skills & Attributes Strong analytical and problem-solving skills. Excellent communication skills, with the ability to work remotely with a global team. Detail-oriented with the ability to manage multiple tasks concurrently. Preferred Qualifications Experience working with global teams, especially in an Agile framework. Knowledge of Salesforce integrations (e.g., REST, SOAP APIs) and third-party tool integrations. Experience with Salesforce Data Loader, Change Sets, and Salesforce DX. Security and Compliance At Rapid7, we prioritize security and privacy. All employees are expected to adhere to the highest standards of security, ensuring the protection of sensitive information and compliance with applicable regulations.

Junior Technical Writer cum System Tester Designation: Junior Technical Writer Location: Pune Experience: 1 2 years Qualifications: B.E./B.Tech in Electrical, Instrumentation, Electronics, Mechatronics, or MSc in Electronics Skills & Technologies Required: Exceptional written and verbal English communication skills Proficiency in Microsoft Office tools Experience in the Machine Automation Industry (OEMs, System Integrators, etc.) Understanding of PLC Programming (Ladder/Structured Text) Experience with Design, Commissioning, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT) Configuring PLC Backplane I/O and Remote I/Os on Fieldbus Hands-on experience with at least one Fieldbus technology (Ethernet/IP, PROFINET, EtherCAT, Ethernet PowerLINK, CAN, PROFIBUS, ControlNET, DeviceNET) Preferred: Experience with Variable Frequency Drives (VFDs) and Servos Programming skills in Python, C, C++, or other high-level programming languages Behavioral Competencies Collaborative and effective team player Eager to learn new technologies, including Python programming and system testing Agile, adaptable, and willing to take on new challenges Self-motivated with a proactive, can-do attitude Role & Responsibilities Collaborate with subject matter experts to gather technical information and proofread/design technical documents Create and update technical documentation in HTML/XML formats Develop and expand skills in Python programming and system testing Assist in creating clear, concise user manuals, product guides, and other technical documents Learn and apply new tools and techniques related to system testing and automation Qualification : B.E./B.Tech in Electrical, Instrumentation, Electronics, Mechatronics, or MSc in Electronics

Technical Lead Software Engineering Location: Pune Employment Type: Full-Time About Calfus At Calfus, we build cutting-edge AI agents and enterprise software solutions that revolutionize how businesses operate. From cloud-based ERP integrations to AI-powered systems, we help startups and enterprises unlock their true potential. Our global team is made up of passionate, driven professionals who thrive on innovation and collaboration. As one of the fastest-growing players in the AI and software engineering space, we offer an exciting, high-energy work environment where your ideas are always welcome. About the Role We are looking for a Technical Lead Software Engineering (System Architecture & Design) to lead the design, development, and support of critical enterprise applications for manufacturing, shipping, and logistics. You ll play a hands-on leadership role, guiding development efforts, solving complex problems, and mentoring a team of engineers. Key Responsibilities System Architecture & Support: Manage and enhance enterprise applications used in manufacturing, shipping, and receiving. Development & Enhancements: Design, develop, test, and deploy scalable new features using Microsoft technologies. Issue Resolution: Troubleshoot and resolve complex system issues, ensuring high availability and reliability. Cross-Functional Collaboration: Work closely with internal teams to understand business needs and translate them into technical solutions. Performance Optimization: Ensure applications are performant, scalable, and secure. Documentation: Maintain accurate technical documentation, workflows, and design specs. End-User Training & Support: Provide user support and training to ensure effective adoption of new features. Mentorship: Guide junior engineers on best practices in architecture, development, and problem-solving. What You ll Need on Day One Bachelor s degree in Computer Science, IT, or related field. 5+ years of hands-on experience in software development and application support. Strong command of Microsoft technologies, especially VB.Net or C#. Proficient in SQL Server including writing complex queries, stored procedures, and data modeling. Excellent analytical and problem-solving skills. Strong communication and team collaboration abilities. Bonus Points If You Have Experience with VB (Visual Basic). Familiarity with SSIS and Entity Framework. Experience developing applications interfacing with PLC frameworks or industrial equipment. Knowledge of Jira and Confluence for agile workflows and documentation. Employee Benefits Comprehensive medical, group, and parental insurance. Gratuity and Provident Fund contributions. Wellness support and birthday leave. A culture of innovation, speed, and collaboration. Diversity & Inclusion At Calfus, we are proud to be an Equal Opportunity Employer. We value diversity and are committed to building an inclusive environment where everyone, regardless of background or identity, can thrive. Apply now and join our team in transforming businesses through technology. Qualification : Bachelors degree in Computer Science, IT, or related field

Job Title: Quality Assurance Engineer Location: Pune Experience: 4 6 Years Qualification: B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering Job Summary We are seeking an experienced Quality Assurance Engineer with a strong background in PCB Assembly (SMT/MI), electronics manufacturing, and quality systems. The role involves ensuring product and process quality, handling root cause analysis, programming production equipment, and driving continuous improvement across the electronics manufacturing lifecycle. Key Responsibilities 1. NPI & Engineering Change Control Lead release to production activities for new products and engineering change notices (ECNs). Program and optimize equipment such as Pick & Place machines, AOI, Reflow ovens, Wave Solder Machines, ICT, and Robotic Soldering. Check and validate stencil and wave pallet suitability for new designs. Prepare PPAP and PFMEA reports with cross-functional teams (Engineering, PPC, Purchase, Production). Plan and coordinate product reliability testing. 2. PCB Assembly Quality (SMT & MI) Conduct in-line and final inspections in accordance with IPC-610 and internal standards. Develop and implement quality control procedures for all stages of PCBA production. Ensure adherence to industry and internal quality standards throughout the manufacturing process. 3. Box Build & End-of-Line Testing Oversee quality assurance in box build and final product assembly. Lead root cause analysis (RCA) for defects and customer complaints. Implement corrective and preventive actions (CAPA) to avoid recurrence. Evaluate and approve suppliers/machine vendors based on quality and capability. 4. Process Control & Audits Analyze production and quality data to identify trends, anomalies, and areas for improvement. Conduct internal audits to ensure process and documentation compliance. Maintain and enhance quality documentation including procedures, work instructions, and specifications. 5. Collaboration & Training Collaborate with R&D and design teams to ensure products are designed for manufacturability and quality. Train shop-floor and QA personnel on quality control procedures and IPC/industry standards. Maintain strong coordination with production and process teams for smooth issue resolution. 6. Workplace Safety & 5S/6S Implementation Ensure a safe work environment with zero accidents in designated areas. Uphold and improve 5S/6S practices across the quality and manufacturing areas. Key Skills & Competencies Must-Have 4 6 years of hands-on experience in PCBA manufacturing and QA. Strong knowledge of IPC standards, particularly IPC-A-610. Proficiency in PPAP, PFMEA, Control Charts, WI, and 7 QC Tools. Understanding of product/component drawings and GD&T principles. ERP experience (SAP or equivalent). Lean Manufacturing and Six Sigma Green Belt certified or equivalent. Nice-to-Have Exposure to troubleshooting of machines and PCBA programming. Certification in Quality Management (e.g., ASQ Certified Quality Engineer). Familiarity with reliability testing methods and equipment validation protocols. Performance Metrics Product defect rate and quality yield Number of successful NPI releases Audit compliance scores (internal/external) Effectiveness of RCA and CAPA closures 5S/6S implementation scores and workplace safety record Work with a leading electronics manufacturing company using the latest SMT & QA technologies Be a part of a team driving innovation, continuous improvement, and zero-defect culture Opportunities for career growth, cross-functional exposure, and professional certification support Qualification : B.E./B.Tech in Electronics, Instrumentation, or Telecommunication Engineering

Business Analyst / Senior Business Analyst Location: Pune Experience: 3 7 years Education: BE / ME / M.Sc / MCA Job Type: Full-Time Job Overview We are looking for an experienced Business Analyst or Senior Business Analyst to join our Client Solutions team. The ideal candidate will be responsible for evaluating business processes, identifying areas for improvement, and designing solutions that align with business needs. You will work closely with stakeholders, clients, and cross-functional teams to optimize processes, document requirements, and ensure timely project completion. Key Responsibilities Business Process Evaluation & Improvement: Evaluate and analyze business processes, identify gaps, and anticipate requirements for process optimization. Lead ongoing reviews of business processes, developing strategies for improvement and automation. Stay updated on the latest trends, IT advancements, and tools to modernize and automate systems. Requirements Analysis & Documentation: Conduct thorough requirements analysis to understand client needs and create clear, actionable plans. Document findings, insights, and business requirements in the form of Functional Requirements Documents (FRD). Effectively communicate your insights, plans, and findings to cross-functional teams and management. Collaboration & Communication: Lead meetings, workshops, and presentations to share ideas, progress, and findings with internal teams. Work closely with clients, technical teams, and managers to ensure that solutions meet business needs and requirements. Act as a liaison between stakeholders and users, ensuring smooth communication and expectations management. Testing & Implementation: Perform User Acceptance Testing (UAT) to validate that the solution aligns with client needs and requirements. Monitor deliverables and ensure the timely completion of projects. Update, implement, and maintain procedures to ensure continual process improvement. Global Client Engagement: Travel to client locations globally, as per business needs, to ensure the successful implementation of projects. Skills & Experience Requirements 3 to 7 years of experience in business analysis or a related field. Experience in CRM or eCommerce domains preferred, but not mandatory. Strong experience in creating detailed reports and delivering presentations. Proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook. Proven experience in leading successful projects and teams. Exceptional analytical and conceptual thinking abilities. Excellent documentation and communication skills. Ability to influence stakeholders and collaborate to define acceptable solutions. Advanced technical skills and a strong understanding of business processes. Excellent planning, organisational, and time-management skills. Qualification : BE / ME / M.Sc / MCA

Job Title: Supervisor Quality Assurance Engineer (Finishing Works) Location: Pune Department: Construction Management Experience Required: 10 to 17 Years Qualification: Diploma in Engineering (Civil preferred) Employment Type: Full-Time Role Objective To ensure robust quality assurance across all finishing-related construction activities in residential projects, including inspections, testing, snagging, and final handover of units. The candidate will be responsible for enforcing quality standards, coordinating with design teams, and driving continuous improvement in finishing work execution. Key Responsibilities Finishing Works Quality Assurance Oversee and inspect finishing works such as: Gypsum plaster Tile and marble flooring Internal and external texture paint systems Ensure all activities comply with project specifications, standards, and regulatory requirements. Testing & Inspection Prepare and implement Inspection & Testing Plans (ITPs) for all finishing works. Carry out detailed inspections of: Fa ade systems, ACP cladding, aluminum windows and doors Wooden/steel fire-rated doors and ensure compliance with local fire safety regulations. Doors, frames, and associated hardware including quality, alignment, and finishes. Perform snagging and de-snagging of completed units before handover. Mock-ups & Coordination Coordinate with architects and project stakeholders to: Develop and get approvals on mock-ups for various finishing elements. Implement feedback and finalize finishing details. Documentation & Methodology Prepare work method statements for all major finishing activities. Maintain detailed records of inspection outcomes, non-conformities, and corrective actions. Handover Process Work closely with the HPM (Handing Over Project Management) team for timely and quality-driven handover of residential flats. Ensure compliance with quality benchmarks before unit release. Other Key Areas Familiar with finishing activities for multi-level car parking structures. Monitor material quality and performance through on-site testing. Support QA activities across architectural finishing scope on site. Required Skills & Competencies Strong understanding of finishing materials, specifications, and application standards In-depth knowledge of quality control procedures and construction site quality assurance Effective problem-solving skills related to finishing execution Ability to read and interpret architectural drawings Collaborative mindset for coordinating with site teams, architects, and consultants Languages Proficiency in English, Hindi, and Marathi (preferred) Qualification : Diploma in Engineering (Civil preferred)

Job Title: QAQC Engineer Fa ade Location: Pune Reporting To: QAQC Manager Department: Construction Management / Quality Assurance Role Overview We are seeking a highly competent and experienced Level 4 QAQC Engineer Fa ade to oversee and manage all fa ade-related quality assurance and control activities across our Pune-based projects. The ideal candidate will have a deep understanding of fa ade engineering, installation practices, materials, and testing, and will ensure that all works meet the highest standards of safety, design compliance, and quality. Key Responsibilities Quality Assurance & Control Lead all QA/QC activities related to fa ade works in the Pune region. Perform site inspections, material reviews, and ensure workmanship meets project specifications and international standards. Develop and implement fa ade-specific inspection and test plans (ITPs), quality checklists, and procedures. Technical Review & Coordination Review and approve fa ade-related method statements, drawings, and material submittals. Coordinate with design consultants, fa ade contractors, suppliers, and internal teams to resolve technical and quality-related issues. Monitor fa ade works to ensure alignment with ASTM, BIS, BS, and EN standards. Documentation & Compliance Maintain detailed and accurate QAQC records, test results, inspection reports, and NCR logs. Identify and address non-conformities; initiate corrective and preventive actions in coordination with stakeholders. Support internal and external audits related to fa ade quality compliance. Training & Support Conduct toolbox talks, briefings, and quality training related to fa ade works for site teams and contractors. Act as the technical point of contact for facade-related issues on-site. Performance & Testing Oversee or assist in fa ade performance testing, including: Air and water infiltration Structural load testing Thermal and acoustic performance (if applicable) Required Qualifications & Experience Bachelor s Degree in Civil Engineering or a related discipline. 5+ years of focused experience in fa ade QA/QC within large-scale construction or infrastructure projects. Proficient in fa ade materials, systems (aluminum, glass, cladding, etc.), and installation methodologies. Well-versed in international fa ade standards (ASTM, BS, BIS, EN). Strong knowledge of QAQC tools, reporting standards, and root cause analysis. Excellent communication, coordination, and documentation skills. Experience in fa ade testing (performance and safety) is an added advantage. Opportunity to work on prestigious, high-rise, and complex fa ade projects in Pune. Be part of a technically progressive and quality-driven team. Attractive compensation package and career development support. Work alongside industry experts and leading fa ade consultants. Qualification : Bachelors Degree in Civil Engineering or a related discipline

Software Integrator Experience: 5 10 Years Location: Pune Role Overview: We are looking for a skilled Software Integrator with 5 10 years of experience in the automotive domain, specifically in ECU software integration. The ideal candidate will be proficient in software build processes, toolchain configuration, integration of modules and libraries, and automation of CI/CD pipelines. This role requires strong technical acumen, attention to detail, and collaboration with cross-functional teams to ensure high-quality software delivery. Key Responsibilities: Perform software integration for automotive ECUs, including compiling, linking, and memory mapping Integrate libraries, interfaces, and compiler switches into the software build Manage scheduling and parametrization of software modules in the integration phase Handle advanced compiling/linking processes, and troubleshoot and resolve integration issues Analyze output files such as .map, .hex, and .s19 to ensure correct memory usage and linking Develop and maintain manual and automated software integration toolchains, including CI/CD pipelines Conduct basic integration testing to validate software builds and ensure functional integrity Collaborate closely with development, testing, and validation teams to support smooth software releases Create and maintain documentation of integration procedures and ensure proper version control of all integration assets Required Skills & Qualifications: 5 10 years of relevant experience in embedded software integration, preferably in the automotive domain Proficient in compilation tools, linkers, and integration processes for ECUs Strong experience with output file formats: .map, .hex, .s19 Solid understanding of CI/CD pipelines (e.g., Jenkins, GitLab CI) Familiarity with version control tools (e.g., Git, SVN) Experience in scripting languages (e.g., Python, Bash) is a plus Good understanding of AUTOSAR architecture is advantageous Strong documentation and communication skills Ability to work independently and collaboratively in a fast-paced environment

Quality Control Manager | Pune Job Description We are looking for an experienced Quality Control Manager who will coordinate inspection services across projects, monitor quality performance, and generate detailed reports based on key performance indicators. You will lead the quality assurance efforts to exceed client expectations and maintain high-quality standards throughout the organization. Key Responsibilities Promote a culture of quality achievement and continuous performance improvement across all departments. Develop, implement, and maintain a comprehensive product quality assurance strategy covering all stages of product development. Set and monitor quality assurance (QA) compliance objectives, ensuring targets are consistently met. Integrate environmental, health, and safety standards into quality procedures. Establish clear quality standards and methods for staff to follow. Collaborate with operations teams to define and enforce quality control procedures. Oversee and support a distributed team to maintain consistent quality performance. Prepare and present quality performance reports to management and stakeholders. Qualifications & Requirements Minimum 3 years of quality control experience in a managerial role. Proven ability to manage and coordinate distributed or remote teams effectively. Strong communication skills with the ability to interact at all organizational levels. In-depth knowledge of quality management systems, environmental standards, and health and safety regulations. Analytical mindset with excellent report-writing skills. Lead quality assurance initiatives in a growing and dynamic company. Work with cross-functional teams to drive operational excellence. Competitive salary and opportunities for professional development. Supportive work culture focused on innovation and quality. Location: Pune Job Type: Full-time Experience: 3+ years Industry: Quality Control / Manufacturing / Operations

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.

Senior .NET Software Engineer Pune, India Location: Pune Experience: 7+ Years Start Date: Immediate Salary: Best in Industry Qualification: Bachelor s or Master s Degree in Computer Science, IT, or related field Job Summary: We are looking for an experienced Senior .NET Software Engineer with a strong background in C#, ASP.NET MVC, and Microsoft Azure to join our technology team in Pune. The ideal candidate will lead the design and development of scalable, secure cloud-based applications while mentoring junior developers and driving best coding practices. Key Responsibilities: Lead the design, development, and ongoing maintenance of complex .NET applications using C#, ASP.NET MVC, and Razor Pages. Architect and implement scalable, secure solutions on Microsoft Azure, including Azure App Services, Functions, and Storage. Design, develop, and maintain RESTful APIs for seamless integration with third-party systems and internal applications. Mentor junior team members, ensuring adherence to best practices, clean code, and robust design patterns. Conduct rigorous code reviews to uphold coding standards and improve code quality. Collaborate with cross-functional teams including product managers, QA, and DevOps to define requirements and deliver high-quality solutions. Optimize applications for performance, scalability, and security. Troubleshoot and resolve complex technical issues in both development and production environments. Required Technical Skills: Extensive hands-on experience with C# and the .NET framework. Expert knowledge of ASP.NET MVC, Razor Pages, and Web API development. Proven experience working with Microsoft Azure services such as Azure App Services, Azure Functions, Azure Storage, and Azure DevOps. Strong familiarity with front-end technologies including HTML, CSS, JavaScript, and frameworks like Angular or React. Advanced skills in SQL Server database design, optimization, stored procedures, and query tuning. Experience implementing CI/CD pipelines, version control using Git, and applying DevOps practices. Solid understanding of software architecture principles, design patterns, and enterprise application development. Excellent debugging, troubleshooting, and performance analysis abilities. Qualifications: Bachelor s or Master s degree in Computer Science, Information Technology, or related field. Minimum 7 years of professional experience in .NET development. Azure certification is preferred but not mandatory. Opportunity to work on cutting-edge cloud-based enterprise applications. Collaborative, innovative, and growth-oriented work environment. Competitive compensation with industry-leading benefits. Continuous learning and career advancement opportunities. Apply now to take the next step in your career as a Senior .NET Software Engineer in Pune!

Senior Analyst-IT & Information Security Administration of One Identity tool and management of integrated Identities and Services. Engineering support of One Identity Manager Environment Management of cloud and on-prem infrastructures hosting IAM. Working knowledge on One identity tools : 1IM Manager / Object Browser / Job Queue / Synchronization editor Understanding of the whole IAM environment, Active Directory Multi forest environment at an enterprise level, Windows OS, IIS, MS SQL server Monitor, Report and Analysis of bugs during and after IAM release versions. Performance management of IAM tools, database and Infrastructure. Administration of Identities and Services integrated with the One IDM tool. Support for Organization integration with the IAM Infra. Collaborate and work with onshore development and project team to provide solutions and assist during Project release, testing and for operational support. Responsible for management of incident, problem and change within the IAM Infrastructure. Responsible for documentation and update of IAM Processes and operating procedures. Work with Software Development tool (e.g., JIRA) and handle various IAM related tasks. Your benefits: We offer a hybrid work model which recognizes the value of striking a balance between in-person collaboration and remote working incl. up to 25 days per year working from abroad We believe in rewarding performance and our compensation and benefits package includes a company bonus scheme, pension, employee shares program and multiple employee discounts (details vary by location) From career development and digital learning programs to international career mobility, we offer lifelong learning for our employees worldwide and an environment where innovation, delivery and empowerment are fostered Flexible working, health and wellbeing offers (including healthcare and parental leave benefits) support to balance family and career andhelp our people return from career breaks with experience that nothing else can teach About Allianz Technology Allianz Technology is the global IT service provider for Allianz and delivers IT solutions that drive the digitalization of the Group. With more than 13,000 employees located in 22 countries around the globe, Allianz Technology works together with other Allianz entities in pioneering the digitalization of the financial services industry. We oversee the full digitalization spectrum from one of the industry s largest IT infrastructure projects that includes data centers, networking and security, to application platforms that span from workplace services to digital interaction. In short, we deliver full-scale, end-to-end IT solutions for Allianz in the digital age. D&I statement Allianz Technology is proud to be an equal opportunity employer encouraging diversity in the working environment. We are interested in your strengths and experience. We welcome all applications from all people regardless of gender identity and/or expression, sexual orientation, race or ethnicity, age, nationality, religion, disability, or philosophy of life. Join us. Let s care for tomorrow.

Responsibilities: Administration of One Identity tool and management of integrated Identities and Services. Engineering support of One Identity Manager Environment Management of cloud and on-prem infrastructures hosting IAM. On boarding of Allianz Organizations to IAM Infrastructure. Understanding of the whole IAM environment, Active Directory Multi forest environment at an enterprise level, Windows OS, IIS, MS SQL server Monitor, Report and Analysis of bugs during and after IAM release versions. Performance management of IAM tools, database and Infrastructure. Administration of Identities and Services integrated with the One IDM tool. Support for Organization integration with the IAM Infra. Collaborate and work with onshore development and project team to provide solutions and assist during Project release, testing and for operational support. Responsible for management of incident, problem and change within the IAM Infrastructure. Responsible for documentation and update of IAM Processes and operating procedures. Work with Software Development tool (e.g., JIRA) and handle various IAM related tasks. Your benefits: We offer a hybrid work model which recognizes the value of striking a balance between in-person collaboration and remote working incl. up to 25 days per year working from abroad We believe in rewarding performance and our compensation and benefits package includes a company bonus scheme, pension, employee shares program and multiple employee discounts (details vary by location) From career development and digital learning programs to international career mobility, we offer lifelong learning for our employees worldwide and an environment where innovation, delivery and empowerment are fostered Flexible working, health and wellbeing offers (including healthcare and parental leave benefits) support to balance family and career andhelp our people return from career breaks with experience that nothing else can teach About Allianz Technology Allianz Technology is the global IT service provider for Allianz and delivers IT solutions that drive the digitalization of the Group. With more than 13,000 employees located in 22 countries around the globe, Allianz Technology works together with other Allianz entities in pioneering the digitalization of the financial services industry. We oversee the full digitalization spectrum from one of the industry s largest IT infrastructure projects that includes data centers, networking and security, to application platforms that span from workplace services to digital interaction. In short, we deliver full-scale, end-to-end IT solutions for Allianz in the digital age. D&I statement Allianz Technology is proud to be an equal opportunity employer encouraging diversity in the working environment. We are interested in your strengths and experience. We welcome all applications from all people regardless of gender identity and/or expression, sexual orientation, race or ethnicity, age, nationality, religion, disability, or philosophy of life. Join us. Let s care for tomorrow.

Job Description: Senior Analyst - IT & Information Security We are looking for a Senior Analyst - IT & Information Security to join our team in Pune. The successful candidate will be responsible for the administration of One Identity tool and the management of integrated identities and services within the IAM (Identity Access Management) environment. You will provide engineering support for the One Identity Manager environment and ensure the smooth functioning of cloud and on-prem infrastructures hosting IAM. Key Responsibilities: Administration of One Identity Tool: Manage and maintain the One Identity Manager (1IM) environment, including Object Browser, Job Queue, and Synchronization Editor. Identity & Service Management: Administer integrated identities and services with the One Identity tool, ensuring smooth integration with organizational systems. IAM Environment Management: Oversee and support the IAM environment at an enterprise level, specifically in a multi-forest Active Directory setup. Manage IAM tools, including performance management of databases and infrastructures. Monitoring & Troubleshooting: Monitor the performance of IAM tools and report on and analyze any bugs during and after IAM release versions. Ensure the smooth functioning of the IAM infrastructure, performing necessary diagnostics and maintenance. Incident, Problem & Change Management: Manage incidents, problems, and changes within the IAM infrastructure, ensuring proper documentation and tracking. Collaboration & Support: Work closely with onshore development and project teams, assisting during project releases, testing, and providing operational support. Process & Documentation Management: Develop and maintain IAM processes and operating procedures documentation. Tool Utilization: Use software development tools such as JIRA for managing IAM-related tasks and issues. Qualifications & Skills: Experience: Proven experience in managing One Identity Manager (1IM) or similar IAM tools. Strong understanding of IAM infrastructure and its integration with organizational systems. Technical Skills: Solid knowledge of Active Directory multi-forest environments and integration with IAM tools. Familiarity with Windows OS, IIS, and MS SQL server. Performance Management: Experience in monitoring, reporting, and analyzing IAM tool performance. Collaboration Skills: Ability to work collaboratively with onshore teams and provide expert support for project releases and operational needs. Incident and Change Management: Demonstrated experience in incident, problem, and change management within IAM systems. Tool Knowledge: Familiarity with using JIRA or other software development tools for task and issue management. What We Offer: Hybrid Work Model: Flexible working options, including up to 25 days per year working from abroad. Compensation & Benefits: Competitive compensation package, including a company bonus scheme, pension, employee shares program, and multiple employee discounts (varies by location). Career Development: Access to career development and digital learning programs, with opportunities for international mobility and lifelong learning. Work-Life Balance: Flexible working and health and wellbeing support, including healthcare and parental leave benefits. Support for career breaks and assistance with returning to work. About Allianz Technology: Allianz Technology is the global IT service provider for Allianz and delivers IT solutions that drive the digitalization of the Group. With over 13,000 employees in 22 countries globally, Allianz Technology is a key partner in pioneering the digital transformation of the financial services industry. We oversee a full spectrum of digital services, including IT infrastructure, networking, security, and application platforms. We are at the forefront of digitalization in the financial services sector, offering end-to-end IT solutions for Allianz. Diversity & Inclusion Statement: At Allianz Technology, we are proud to be an equal opportunity employer. We believe in fostering a diverse and inclusive work environment. We welcome applications from individuals of all backgrounds and identities, regardless of gender, ethnicity, age, nationality, religion, disability, or sexual orientation. Join us and help shape the future of technology! Let s care for tomorrow.

R&D Verification Engineer Summary / Role Purpose The R&D Verification Engineer joins the Fluids Business Unit to conduct software testing of ANSYS Computational Fluid Dynamics (CFD) applications. This role helps assess how well the product meets customer needs in terms of functionality and usability while ensuring compliance with product requirements and quality standards. The engineer will collaborate closely with the product creation team and communicate with technical specialists on product issues. Key Duties and Responsibilities Perform functional and regression testing in manual and/or automated test environments. Verify defect fixes and write detailed software defect reports and enhancement requests. Apply standard techniques and procedures while complying with the company's overall development and testing processes. Work in various computing environments, including both Windows and Linux operating systems and high-performance computing. Minimum Education / Certification Requirements and Experience BS in Mechanical, Aerospace, or Chemical Engineering or a related engineering field. Preferred Qualifications and Skills MS in Mechanical, Aerospace, or Chemical Engineering or a related engineering field. Working knowledge of the numerical methods and algorithms typically used for CFD. Experience using Fluent CFD software to solve engineering problems. Strong computing skills, including experience with scripting languages (e.g., Python) and both Linux and Windows platforms. Basic understanding of software testing and verification processes. Good communication and interpersonal skills. Ability to learn quickly and collaborate with a geographically distributed team. Qualification : BS in Mechanical, Aerospace or Chemical Engineering or related engineering field

Introduction: In this role, you will be a part of one of our IBM Consulting Client Innovation Centers (Delivery Centers), where we deliver deep technical and industry expertise to both public and private sector clients worldwide. These centers provide locally-based skills and technical know-how to drive innovation and foster the adoption of new technologies. At IBM Consulting, you will form long-term relationships and collaborate closely with clients across the globe, helping them navigate the hybrid cloud and AI journey. You will leverage our extensive strategic partner ecosystem and robust technology platforms, including Software and Red Hat, to make a meaningful impact on client success. You will also be encouraged to challenge the norm, explore new ideas, and develop creative solutions to deliver groundbreaking results. Your Role and Responsibilities: As an SAP ABAP Developer, you will be responsible for: Analytical problem-solving within SAP environments, working with a range of systems and modules. SAP ABAP programming, including working on Module pool, interfaces, Adobe forms, and BADI. Developing and maintaining solutions to enhance SAP-based business processes. Troubleshooting, debugging, and optimizing existing ABAP code. Collaborating with cross-functional teams to ensure alignment between development and functional requirements. Required Technical and Professional Expertise: BE / B Tech in any stream, M.Sc. (Computer Science/IT), or M.C.A. Minimum 5-7 years of extensive prior experience in SAP ABAP programming. Strong experience in Module pool programming, interfaces, Adobe forms, and BADI. Excellent analytical and problem-solving skills. Preferred Technical and Professional Expertise: Basic knowledge of functional modules like FI/CO, SD, MM. Basic knowledge of other functional modules like PP/QM, PM, HR, etc. Ability to adapt and learn new SAP functionalities or modules quickly. At IBM Consulting, you will be a part of an innovative and dynamic team. You will have the opportunity to collaborate on complex projects, working with the latest cloud and AI technologies, helping drive transformation and technological advancement for global clients. IBM offers a culture of continuous learning, providing opportunities for personal and professional growth in an environment that supports your career development. Qualification : BE / B Tech in any stream, M.Sc. (Computer Science/IT) / M.C.A, with Minimum 5-7 years