Wage Calculation Jobs in Bengaluru

Engineer MEP (Mechanical, Electrical, Plumbing) Education: BE (Electrical/Mechanical) Experience: 2 6 years Location: Bangalore Job Overview We are looking for a dedicated MEP Engineer to join our team and ensure the successful execution of mechanical, electrical, and plumbing works on our projects. You will be responsible for overseeing the installation, testing, and commissioning of MEP systems, ensuring they meet the project s technical specifications, safety standards, and schedule. You will collaborate with contractors, consultants, and internal teams to ensure the highest quality of work and efficient progress throughout the project lifecycle. Key Responsibilities MEP Installation & Supervision: Oversee the installation, inspection, and testing of MEP equipment, fittings, and systems, ensuring compliance with project specifications and consultant requirements. Quality & Schedule Control: Ensure that MEP work is carried out according to approved drawings and within the designated timeframes, aligning with the overall construction program. Coordination & Execution: Coordinate with contractors and agencies to ensure that MEP work is executed efficiently, maintaining high standards of quality, speed, economy, and safety. Drawing Analysis & Feedback: Study and review project drawings and provide feedback or suggestions for improvement, if necessary. Material Management: Prepare bills for materials and services raised by contractors on-site, and raise requisitions for any additional materials needed. Site Supervision: Conduct daily site walk-throughs and closely monitor the progress of subcontractor work, ensuring it adheres to standards. Installation Methods & Sequence: Stay informed of best practices for installation methods and ensure the correct sequence of MEP work is followed on-site. Reporting & Documentation: Prepare technical reports, drawings, and specifications related to MEP work and ensure all documentation is accurate and up-to-date. Material Inspection: Inspect incoming MEP materials for quality and compliance with IS codes, BOQs, and project specifications. Required Skills Strong knowledge of Electrical & Fire Systems, HVAC (Heating, Ventilation, and Air Conditioning), and Plumbing systems. Familiarity with IS codes and BOQs for MEP materials and construction standards. Proficiency in reviewing and interpreting technical drawings, specifications, and project documentation. Excellent site supervision and coordination skills with the ability to manage multiple tasks simultaneously. Ability to handle material requisitions and ensure timely procurement of necessary supplies. Good communication skills to work effectively with contractors, consultants, and internal teams. Qualifications BE in Electrical Engineering or Mechanical Engineering. 2 6 years of experience in MEP systems, preferably in construction or infrastructure projects. Qualification : BE in Electrical Engineering or Mechanical Engineering

MEP Engineer Location: Bengaluru Qualification: B.Tech (Mechanical / Electrical) Experience: 6+ years Job Description We are looking for a skilled and detail-oriented MEP Engineer to oversee the Mechanical, Electrical, and Plumbing systems for our construction and infrastructure projects. The ideal candidate should have hands-on experience in MEP design coordination, execution, and site supervision, ensuring quality, safety, and compliance with project specifications. Key Responsibilities Plan, review, and manage the execution of MEP works (HVAC, electrical, plumbing, fire-fighting, etc.) at project sites. Coordinate with architects, structural engineers, consultants, and contractors to ensure seamless integration of MEP services. Review technical drawings, specifications, and BOQs for accuracy and alignment with project requirements. Monitor MEP installation activities to ensure compliance with design, quality, and safety standards. Conduct regular site inspections and testing of MEP systems. Identify and resolve any on-site technical issues related to MEP services. Assist in procurement of MEP materials and ensure timely delivery. Support project managers in preparing progress reports and documentation. Required Skills & Experience B.Tech in Mechanical or Electrical Engineering. Minimum 6 years of experience in MEP coordination and execution in construction or infrastructure projects. Good understanding of HVAC, electrical systems, water supply, drainage, and fire safety systems. Proficient in reading technical drawings and using AutoCAD or related software. Strong problem-solving, coordination, and communication skills. Knowledge of applicable building codes and safety regulations. Qualification : B.Tech in Mechanical or Electrical Engineering

Electrical System Installation (ESI) Engineer Experience: 3 12 Years Location: Bangalore Role Overview: We are looking for an experienced Electrical System Installation Engineer / Technical Leader to support electrical harness design and installation projects, primarily in aerospace programs such as Airbus A320. This role requires managing design synchronization, modification processes, and ensuring compliance with Airbus design standards and processes. The candidate will work closely with cross-functional teams and design offices to deliver consistent, high-quality electrical system installations. Key Responsibilities: Coordinate and synchronize design activities with various design offices and project teams (e.g., DDMS projects) Manage the complete modification process from Change Request initiation to drawing delivery Establish and maintain design-related processes, methods, and tools to ensure full consistency and coherence Provide accurate and timely reporting to the Head of Project Support system installation design, follow-up, and validation checks Create and maintain drawing sets for Harness Design, Installation, VKE, Equipment Installation, Heater Installation, VU/VE Design Ensure compliance with Airbus installation rules and processes throughout the project lifecycle Qualifications: 3 to 12 years of hands-on experience in Electrical System Installation with strong DMU skills for harness modeling and installation analysis within A320/SA projects Good understanding of Airbus-specific tools and processes including Configuration Management, EHI Concept Design, Electrical Bracket Positioning, IP and UID proposals Experience in system installation design and support activities (design follow-up, installation checks) Knowledge of Functional Electrics (FE) including Configuration Management, Design, RDR & DQN instructions, and support on delivery checks is a plus Familiarity with Design Organization Approval (DOA) is advantageous Technical Skills: Expertise in Catia V5, VPM, PDMLink, PASS SSI / CCD, TAKSY, AIRINA, IPM4Legacy, and other Airbus customized tools Proficient in MS Office applications (Word, PowerPoint, Excel)

Job Title: Design Engineer Location: Bengaluru, Karnataka No. of Positions: 1 2 Industry: Home Automation & AV, Building Automation Joining: Immediate About EBSL Automat Pvt. Ltd. EBSL Automat is a leading provider of innovative home automation solutions, dedicated to enhancing everyday living through intelligent technologies. With a strong presence in the smart living and building automation industry, we offer an exciting and collaborative environment for engineering professionals to grow, innovate, and contribute to transformative projects. Position Overview We are looking for a Design Engineer with a passion for CAD modeling, automation, and system development. This role involves collaborating with engineering, drafting, and operations teams to develop accurate, efficient, and high-quality design solutions. If you're technically inclined, detail-oriented, and eager to contribute to cutting-edge smart automation systems, this opportunity is for you. Key Responsibilities Assist in the development and implementation of CAD modeling and drafting standards for consistent documentation and design. Collaborate with cross-functional teams to incorporate Design for Manufacturability (DFM) and Design for Assembly (DFA) into models and technical drawings. Continuously improve design automation processes to boost efficiency and accuracy. Support engineering operations with tools like spreadsheets, parts lists, BOM (Bill of Materials) generation, and calculation templates. Develop internal system procedures to maintain high-quality standards aligned with industry best practices. Document technical procedures, user manuals, and training materials. Provide technical training and support to team members when needed. Contribute to other engineering or development projects as assigned. Skills & Experience Must-Have: Bachelor's degree in Electrical Engineering or a related field. 1 4 years of relevant experience in industrial or design automation. Good verbal and written communication skills. Team player with the ability to work under tight deadlines. Strong attention to detail, creative problem-solving skills, and analytical thinking. Proficiency in CAD software and understanding of design principles. Experience with engineering tools, ERP systems, and MS Office Suite (Excel, Word, Outlook). Preferred/Good-to-Have: Experience in CAD automation or engineering application development (2+ years preferred). Ability to work as a full-stack developer (desktop, web, client platforms) is a plus. Passion for programming and self-driven learning. Ability to work in flexible shifts as required. Familiarity with home automation or building systems is advantageous. Who Can Apply Candidates with 1 4 years of relevant experience. Freshers with strong academic backgrounds and a passion for design & automation are also encouraged to apply. If you're looking to contribute to the future of intelligent living while advancing your engineering career, we invite you to be part of the EBSL Automat journey. Qualification : Bachelor's degree in Electrical Engineering or a related field

Senior Lead Engineer Structural Analysis (Hybrid) Location: Bangalore, Karnataka, India Job Type: Full-time Company: Collins Aerospace (Raytheon Technologies) Experience: 5 8 years Job Overview We re looking for a Senior Lead Engineer (Stress) to join our Advanced Structures business unit. This role leads structural analysis for New Product Introduction, redesign, and technology programs. Support includes a wide range of aerospace components including ETRAS systems. Responsibilities Lead stress analysis using FEA tools (Ansys) and classical hand calculations. Prepare structural analysis documentation, stress reports, and certification data. Collaborate with design, manufacturing, and quality teams. Investigate failures and provide technical resolutions. Contribute to process improvements, automation, and tool development. Ensure on-time and quality delivery of engineering work products. Basic Qualifications Bachelor s/Master s in Mechanical or Aerospace Engineering. 5 8 years of structural analysis experience using Ansys Workbench. Strong background in fatigue, stress, and vibration analysis. Skilled in classical calculations and report writing. Preferred Qualifications Experience in hydraulic/electro-mechanical component analysis. Proficiency with Mathcad, Python, or Excel VBA. Familiarity with aerospace material properties and treatment processes. Benefits Transportation & meal vouchers Group life, health, and personal accident insurance 18 days vacation + 12 days contingency leave National Pension Scheme and car lease options Employee scholar program Equal Opportunity Collins Aerospace is an equal opportunity employer and values diversity. All qualified applicants will receive consideration without regard to race, gender, disability, or veteran status. Apply Now Be part of our aerospace revolution. Apply today and help us redefine flight for the future.

Position: Application Engineer, Analog & Power Job Overview: We are seeking an Application Engineer specializing in Analog & Power to join our team. In this role, you will provide advanced engineering design services and support to the regional engineering team, with a focus on power electronics and analog engineering solutions. You will be responsible for hardware engineering support, including PCB design and review, electronic simulations, and laboratory analysis, all while ensuring compliance with industry standards and customer specifications. Key Responsibilities: Provide advanced engineering design and support for power electronics and analog systems, assisting the regional engineering team. Conduct hardware engineering tasks, including PCB reviews, electronic simulations, and using lab equipment such as PCBA rework tools and oscilloscopes for product development. Lead PCB design from initial concept (block diagrams) to part selection, schematics, layout, Gerber files, and prototype testing. Develop clear and concise technical documentation, such as whitepapers, technical reports, and internal training materials. Support the development and validation of reference designs to meet customer specifications. Ensure that all designs comply with relevant industry standards and customer specifications. Attend technical and sales training to stay up to date with current technologies and trends. Maintain accurate documentation of engineering designs and solutions for future reference. What We Are Looking For: Bachelor s Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field. At least 7 years of experience in electronics/semiconductors, power management, and analog product design. Strong technical expertise in power conversion topologies (DC-DC, AC-DC, DC-AC). Experience working with WBG (Wide Bandgap) devices such as SiC and GaN. Solid experience with electrical instrumentation, including Op-Amps, signal conditioning, sensors, and data acquisition systems. Familiarity with industry standards and compliance (e.g., IEC, UL, ISO) for high-power systems. In-depth understanding of EMI/EMC standards and mitigation techniques for high-power designs. Experience in reference design development, validation, and component optimization. Strong communication and interpersonal skills to collaborate effectively with internal teams and customers. A passion for innovation and a commitment to delivering high-quality engineering solutions. What s In It For You: Access to training and professional development opportunities. Performance coaching and growth support. The chance to work with a fun and supportive team. Opportunity to be part of a growing and strong company. Community involvement opportunities. About Arrow: Arrow Electronics, Inc. (NYSE: ARW), a Fortune 133 company and one of Fortune Magazine s Most Admired Companies, is a global leader in technology solutions. With 2023 sales of USD $33.11 billion, Arrow develops innovative technology solutions that improve business and daily life. Our broad portfolio helps customers create, make, and manage forward-thinking products that make technology accessible to more people. Location: Bangalore, India Employment Type: Full-time Job Category: Engineering and Technology Qualification : Bachelors Degree or higher in Electronics, Electrical Engineering, Computer Science, or a related field.

Job Description: Electrical Manager Experience: 3+ Years Qualification: B.TECH (Mandatory), M.TECH (Preferred) Job Description: We are seeking an experienced Electrical Manager with at least 3 years of experience to oversee the electrical works for construction projects. The ideal candidate will have a deep understanding of electrical drawings, materials management, and project planning. The role involves managing all stages of electrical works, from planning and scheduling to execution and handover. The candidate should have completed and handed over at least two projects, including one residential and one commercial project. Key Responsibilities: Electrical Project Management: Lead the electrical team and manage electrical works for construction projects. Oversee the planning, coordination, and execution of all electrical works, ensuring they align with project specifications and timelines. Monitor and manage electrical works for both residential and commercial projects. Electrical Drawings and Works: Possess a strong knowledge of electrical drawings and works, ensuring their proper execution. Review and prepare electrical shop drawings for approval, and ensure timely submission of samples for technical approval. Tender Analysis and Worker Orders: Analyze the Tender Bill of Quantities (BoQ) and worker orders to ensure accurate estimation and cost management for electrical works. Planning & Scheduling: Create and manage electrical project schedules using MSP (Microsoft Project), ensuring efficient and timely completion of tasks at each project stage. Monitor progress and implement corrective actions when necessary to avoid delays. Material Management: Prepare and manage material requisitions and procurement processes for electrical works. Ensure proper material handling, tracking, and inventory management. Documentation & Reporting: Prepare and maintain various project documentation such as MIR (Material Inspection Reports), RPI (Request for Inspection), ECR (Engineering Change Requests), DPR (Daily Progress Reports), DLR (Daily Log Reports), and other important documents. Create and review method statements, micro work schedules, cash flow statements, and other documentation related to the electrical works. Approval and Certification: Prepare and submit client bills, ensuring that they are certified in a timely manner. Coordinate with clients and vendors to ensure that all approvals are obtained as needed. Coordination: Collaborate with other project teams to ensure the smooth integration of electrical systems with other construction works. Coordinate with vendors, PMO teams, and clients to ensure timely and successful project completion. Communication and Leadership: Provide leadership and guidance to the electrical team, ensuring high-quality work and adherence to project timelines. Exhibit excellent communication skills to interact effectively with clients, subordinates, vendors, and PMO teams. Qualifications and Skills: Experience: Minimum 3 years of experience as an Electrical Manager in the construction industry. Proven experience in completing at least two projects (one residential and one commercial). Technical Skills: Strong knowledge of electrical drawings and works, with the ability to review and approve shop drawings. Proficiency in MS Office, CAD, and MSP (Microsoft Project) for planning and scheduling electrical works. Documentation & Compliance: Experience in preparing and reviewing project documentation such as MIR, RPI, ECR, DPR, DLR, JMS, and other critical documents. Project Management: Experience in planning and scheduling electrical works, monitoring project progress, and ensuring timely completion. Familiarity with material management, procurement processes, and cost estimation. Communication Skills: Strong communication skills to interact with clients, vendors, subordinates, and other project stakeholders. Ability to lead a team and ensure seamless coordination between different departments. Qualification: A B.TECH degree in Electrical Engineering is mandatory. M.TECH is preferred. Other Skills: Strong problem-solving abilities and attention to detail. Ability to work under pressure and manage multiple tasks effectively. What We Offer: Competitive salary and benefits. Opportunity to work on diverse and high-profile construction projects. A collaborative and growth-oriented work environment. Qualification : A B.TECH degree in Electrical Engineering is mandatory. M.TECH is preferred.

Job Description: Underground Cable Designer Transmission & Distribution Description: Experience in Design of Underground Power line projects using different software or relevant such as Civil 3D, MicroStation, ArcGIS. Role and Responsibilities: Prepare designs and drawings to be carried out in accordance with relevant codes of practice, standards, regulatory authorities, and clients' requirements. Coordinate with lower-level drafting personnel. Support their mentorship and technical development. Delegate and oversee workload to lower-level drafting personnel assigned to projects. Perform documented quality reviews of drawing packages adhering to the terms of the quality management system. Provide specialist knowledge input and keep up to date with the latest developments in particular fields. Innovate and identify optimal methods to perform design tasks. Be willing to make the necessary travels to carry out project requirements. Coordinate with project engineering and project management teams to ensure timely and quality deliverables. Perform QA/QC reviews of pulling calculations, alignments, layers, design standards, and construction design packages. Promote the interests of the company, for example through personal contacts, representation in professional groups, contributions at meetings and the publication of material where opportunities arise. Qualifications: Diploma in Electrical/Civil with 3-4 years of experience OR ITI in Electrical/Civil with 6-8 years of experience. Underground experience a plus. Transmission or distribution experience preferred. Proven verbal and written communication and IT (office packages) skills. Track record in finding solutions to complex problems within deadlines. Experience leading a team of engineers and designers. Managing multiple projects, deadlines, and deliverables in parallel. Communicating with multiple teams and stakeholders. Priority management and schedule planning. Knowledge of underground powerlines construction methods a plus. Knowledge regarding easements, right-of-way, and permitting considerations and impacts. Knowledge of creating plan & profile drawings using Civil-3D or MicroStation. Able to handle multiple projects simultaneously and to prioritize work. Knowledge of utility telecommunications, distributed energy resource integration, and advanced distribution technologies a plus. Strong analytical capability. Flexibility to work in different roles for different clients both locally and worldwide. Traveling will be a considerable advantage. Capable of devising new approaches to problems encountered. Qualification : Diploma in Electrical/Civil with 3-4 years of experience OR ITI in Electrical/Civil with 6-8 years of experience.

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Experience in micro architecture and requirements/implementation for automotive designs (focused on functional safety) and their Safety Analysis work products like concept FMEDA, DFA, DFMEA, FTA, FMEDA, etc. including FuSa compliant IP development and third-party IP compliance/deliverables/DIA. Responsibilities shall include the following: Developing a system level safety concepts and requirements for ADAS and IVI use cases with customer implementations in mind and to integrate Qualcomm s hardware in leading Automotive OEM and Tier 1 safety critical systems. Work in collaboration with 3rd party, Customer, and Automotive Stack suppliers, Hardware component suppliers (PMIC, DRAM, Sensor, etc) to ensure all aligned customer system level requirements are met Work with IP and SoC teams on the implementation of Technical Safety Concepts (TSCs) on Qualcomm s Snapdragon automotive hardware. Work with various technology teams on architectural features that would enable targeted safety levels (ASIL B to ASIL D, depending upon the technology team and system level requirements) to meet customer targets Conducting safety analyses, both quantitative and qualitative, fault campaigns on automotive hardware designs and identify areas of improvement. Responsibilities will include leading functional safety related activities for SoC development and ensure ISO 26262 compliance with respect to SoC architecture, development processes and work products. Work closely with SoC Design and IP teams, Software team, Quality teams, the functional safety manager(s) as well as customers to ensure the functional safety process is executed and documented. Working with vendors and partners to ensure functional safety requirements are fulfilled by the components that they provide Work with internal and external functional safety assessors to ensure compliance with ISO 26262 Create functional safety collateral for customers viz. Functional Safety Manual, Safety Analyses Reports, dedicated application notes etc. Supporting customer assessments of our safety features and recommending HW and SW based solutions that meet overall system targets. Working closely with customers and supporting them on various functional safety related aspects Minimum Qualifications Bachelor s degree in engineering, Information Systems, Computer Science, or related field. 8+ years Systems Engineering, SoC Integration, Verification, or related work experience. Collaborative work experience with good communication skills involving customers, vendors, and internal development teams. Structured problem-solving capability and ability to work with teams on root cause analyses. Preferred Qualifications 5+ years Automotive experience and familiarity with Safety work products, experience with Functional Safety Hardware and/or Software development in semiconductor industry meeting IS0 26262/ IEC 61508 standards. Prior automotive experience in ADAS and self-driving systems preferred. System level Functional safety analysis experience on Hardware/Software components integration preferred SoC/IP integration or verification with good understanding of SoC Architecture and IP design experience preferred Requirements Management Tools and establishing traceability for functional safety requirements e.g. DOORS, etc. Familiarity with Failure Modes and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) is required experience using tools to perform FMEA, FTA preferred Familiarity with hardware failure rate calculation (FMEDA) experience using Siemens 29500 and/or IEC 62380 preferred Relevant Safety Certification is desired e.g. CFSE, CFSP Qualification : Bachelors degree in engineering, Information Systems, Computer Science, or related field.

Senior Payroll & HR Generalist About Saviynt Saviynt is an identity authority platform designed to power and protect organizations in an era of digital transformation. As businesses navigate growing cybersecurity risks, our Enterprise Identity Cloud provides unparalleled visibility, control, and intelligence, ensuring secure, right-time access to critical digital resources. To support our rapid growth, we are seeking a Senior Payroll & HR Generalist who will play a crucial role in managing payroll processes and leading key HR functions across India and the APAC region. This role will report to the Manager of Payroll & Benefits in El Segundo, CA, for functional leadership, while working locally under the Director of Human Resources in Bengaluru. Key Responsibilities Payroll Processing & Compliance Lead and oversee end-to-end payroll processing for India & APAC, ensuring accuracy, compliance, and timeliness. Partner with global payroll and accounting firms to maintain adherence to international payroll regulations and best practices. Review, analyze, and verify payroll reports to identify discrepancies, processing necessary adjustments before final payroll completion. Maintain and update payroll data in Namely, ensuring accurate records of compensation, tax deductions, bonuses, and statutory contributions. Manage payroll-related benefits administration, including incentives, tax deductions, and retirement contributions. Ensure compliance with local labor laws, taxation policies, and company policies related to payroll and employee benefits. HR Generalist & Employee Lifecycle Management Oversee employee leave management, ensuring accurate payroll integration and compliance with company policies. Support onboarding & offboarding processes, ensuring payroll setup for new hires and accurate termination payouts. Assist with performance evaluation processes, ensuring payroll-related adjustments align with compensation changes. Serve as an HR compliance expert, advising on payroll-related labor laws, employment verification, and unemployment claims. Audit, Reporting & Strategic HR Support Prepare payroll-related reports for internal and external stakeholders. Facilitate payroll audits, pension filings, and employment verifications. Work closely with HR leadership to align payroll strategies with business objectives and drive process improvements. Provide administrative, operational, and strategic HR support to the Director of Human Resources as needed. What You Bring Extensive experience in payroll processing & HR functions for India & APAC. Strong knowledge of Indian labor laws, payroll compliance, taxation, and employee benefits. Experience in full-cycle payroll management, including incentives, tax deductions, and statutory contributions. Proficiency in HR systems (Namely or similar HRIS platforms). Ability to manage audits, reports, and compliance documentation. Excellent attention to detail, problem-solving, and analytical skills. Strong collaboration skills with global teams across multiple time zones. Preferred (Good to Have): Experience working in a fast-paced SaaS or tech-driven organization. Knowledge of global payroll practices (US, Europe, APAC, etc.). Work in a high-growth, technology-driven environment that values innovation and excellence. Gain exposure to global payroll processes & HR strategies in a dynamic, fast-paced setting. Collaborate with industry-leading professionals and contribute to scaling a global workforce. Competitive compensation, benefits, and professional growth opportunities. Saviynt is an equal opportunity employer. We welcome applicants from diverse backgrounds and do not discriminate based on race, gender, age, disability, or veteran status. If you re a detail-oriented payroll and HR expert passionate about process efficiency and compliance, we d love to hear from you!

Job Title: Payroll Operations New Associate Skill Required: Payroll Payroll Process Design Location: Bengaluru Qualifications: Any Graduation Experience: 0 - 1 Year About Accenture: Accenture is a global professional services company with leading expertise in digital, cloud, and security. With unmatched experience across 40+ industries, we provide Strategy & Consulting, Technology, and Operations services, along with Accenture Song all powered by the world's largest network of Advanced Technology and Intelligent Operations centers. Our 699,000+ professionals serve clients in over 120 countries, driving innovation and delivering real impact. Visit us at www.accenture.com Job Overview: We are looking for a Payroll Operations New Associate to support payroll processing activities with precision and efficiency. You will play a key role in HR and payroll data management, ensuring compliance with payroll policies and timely issue resolution. Key Responsibilities: Process HR and payroll data in payroll applications within agreed timelines. Address employee and HR queries related to payroll inputs efficiently. Work closely with payroll providers and third-party vendors to resolve discrepancies. Perform checks, validations, and variance analysis on payroll reports. Conduct reasonability checks between current and previous payroll cycles. Assist in resolving payroll-related issues within defined policies and procedures. Support improvements in payroll preparation, pay-slip calculations, post-payroll registration, accounting, and compliance. Skills & Qualifications: Must-Have: Basic payroll experience (US, UK, or International payroll preferred). Strong communication skills to interact effectively with employees and stakeholders. Attention to detail and ability to handle sensitive payroll data. Familiarity with payroll processing systems is an advantage. Good to Have: Knowledge of statutory payroll compliance and reporting requirements. Experience in working with third-party payroll vendors. Be part of a globally recognized organization with vast career growth opportunities. Gain experience in international payroll operations. Work in a dynamic and fast-paced environment with exposure to leading payroll technologies. If you're looking to start or build your career in payroll operations, apply now and be part of Accenture s high-performing team in Bengaluru!

Be part of the world s most successful, purpose-led business. Work with brands that are well-loved around the world, that improve the lives of our consumers and the communities around us. We promote innovation, big and small, to make our business win and grow; and we believe in business as a force for good. Unleash your curiosity, challenge ideas and disrupt processes; use your energy to make this happen. Our brilliant business leaders and colleagues provide mentorship and inspiration, so you can be at your best. Every day, nine out of ten Indian households use our products to feel good, look good and get more out of life giving us a unique opportunity to build a brighter future. Every individual here can bring their purpose to life through their work. Join us and you ll be surrounded by inspiring leaders and supportive peers. Among them, you ll channel your purpose, bring fresh ideas to the table, and simply be you. As you work to make a real impact on the business and the world, we ll work to help you become a better you. ABOUT UNIOPS: Unilever Operations (UniOps) is the global technology and operations engine of Unilever offering business services, technology, and enterprise solutions. UniOps serves over 190 locations and through a network of specialized service lines and partners delivers insights and innovations, user experiences and end-to-end seamless delivery making Unilever Purpose Led and Future Fit. Background: UniOps Tax Data Centre of Excellence team in Unilever is responsible for collection, analysis of tax and finance data and performing / supporting tax compliance, tax, tax reporting and tax audit. in the areas related to direct tax, indirect tax, withholding tax and transfer pricing. The team is also responsible for monitoring the tax control framework and co-development of tax related technology infrastructure along with IT team and maintaining Global Process Model (GPM) and exceptions resolution for tax related issues Main purpose of job: The Global Tax function has launched the Future of Tax (FOT) transformation project under the Digital Finance umbrella. As part of the Future of Tax project, compliance work related to direct tax, indirect tax, withholding tax and transfer pricing which will be done by Business and Supplier Operations Team, under a new target Operating Model (TOM). The new TOM will involve tax process to be performed across Global Tax team, Country Tax Team, UniOps and 3rd party consultant (Big 4s). The UniOps team is envisioned to be the central tax data organization with the responsibility to deliver good quality data. The team has to manage tax data in order to improve the efficiency of the tax operations in a cost-effective manner. UniOps vision is to build an externally benchmarked, world class Tax Data COE which delivers End to End high-quality, accurate financial information for effective decision making and meeting regulatory requirements. Guiding Principles for project success Drive value by freeing up space within Tax (through effective partnering) to focus on strategy Global, standardized, simplified and efficient tax process model Flexible, agile and Future Fit sustainable operations Ownership mindset with passion for high performance Key Requirements of the Role: Collecting / querying / consolidating information from accounting / ERP systems (SAP) Managing financial data with focus on hygiene of master data and transactional data Reconciliation and analysis of data Check sample high value documents checks on tax data being extracted. Check for accuracy and allowance of expenses for tax deduction Monthly/quarterly calculation of VAT and preparation of VAT returns for various countries across the globe Annual preparation of Corporate Income Tax packs of various countries across the globe Post tax related entries in the books of accounts, after sign off from country tax team Ensure tax related payments happen to government / tax authorities as per the timelines in respective countries. Ensure tax related controls and compliance are met as per the Unilever control framework Prepare and maintain detailed documentation/files on monthly basis related to direct tax reporting. Provide documentation / data support on the audit queries raised with analysis performed. Archiving of documents of all the direct tax related activities from data extraction till filings in company dedicated folders as per ITGC & audit requirements. Technical Skills Good Accounting Knowledge (Record to Report) Overview of Direct/Indirect Tax Fully conversant with SAP (FI Module) Awareness of Power BI, Tableau and Workflow management tools would be an added advantage. Successful transition of Record to Report or other finance activities to a Global Hub Soft skills: Good in verbal and written communications. Should have a positive attitude and should be able to proactively get things done Strong problem solving, and analytical skills Good interpersonal Skills - Must have the ability to effectively communicate with personnel at all levels inside and outside of the company. Must be a self-starter with proven ability to take ownership of job responsibilities. Educational Qualification and Experience Semi qualified CA/ICWAI/Masters Degree in Accounting with 2-3- years of experience Work experience in Accounting and Finance Key interfaces Global Tax Team Country Tax Team Country Finance Team Outsourced Service Provide (Big 4)) Qualification : Semi qualified CA/ICWAI/Masters Degree in Accounting with 2-3- years of experience

Job Summary: Halliburton is seeking experienced candidates for the SAP Payroll Specialist position, focusing on payroll processing, administration, and taxation for US and Canada. The ideal candidate will have 2-8 years of relevant experience in SAP payroll systems and the key responsibility areas mentioned below. This role requires strong communication skills and an individual contributor mindset, as it is not a leadership position. Key Responsibilities: Payroll Processing: Responsible for end-to-end payroll processing, including administration, distribution, and banking. Payroll Accounting: Handle payroll accounting tasks such as General Ledger (GL) posting and payroll account reconciliations. Payroll Taxation: Manage payroll-related taxes including income tax, multi-work taxation, and international taxation. Communication: Demonstrate excellent spoken and written English language skills to handle business communications effectively. Qualifications: Experience: 2-8 years of relevant experience with SAP payroll systems, specifically for US and Canada payroll. Education: Relevant educational qualifications in payroll, accounting, or related fields. Skills: Proficiency in SAP payroll system. Strong understanding of payroll accounting, taxation, and administration. Shift Requirements: The role requires a shift from 5 PM to 3 AM. Note for Leadership Role Holders: Candidates in Team Lead/Assistant Manager/Manager roles should note that this is an Individual Contributor role and not a leadership position. Why Halliburton? Career Growth: Halliburton invests in its employees, offering opportunities for personal development and career advancement. Work Environment: As a leading global energy company, Halliburton provides employees with opportunities to experience cutting-edge technologies and work in a dynamic environment. Equal Opportunity Employer: Halliburton is an Equal Opportunity Employer, ensuring all employment decisions are made without discrimination based on race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identity, age, veteran status, national origin, or any other protected status.

Job Description: Develop and implement design strategies that contribute to Climate Positive, Nature Positive, and Human Positive project outcomes. Act as the main point of contact and maintain a good working relationship with clients. Negotiate fees, contracts, and deliverables both internally and externally. Drive business development centered on the Building Services team as part of the team s expansion. Lead the bidding work for the MEP team and collaborate with the wider Built Environment team for multi-disciplinary bids. Seek new opportunities with new clients and secure work for the MEP team. Handle day-to-day engineering duties, lead by example, and manage the MEP team. Ensure adequate resource levels within the office. Hire new staff and manage the team structure. Review project performance. Drive excellence within the MEP team. Conduct financial forward planning, set, manage, and achieve targets and budgets. Ensure compliance with the business management system. Candidate Specification: B.Tech/M.Tech in Mechanical Engineering or Electrical Engineering. Exemplary client management skills with the ability to maintain relationships while growing the business and winning new work and clients. Experience in the design and construction of innovative and technically challenging buildings. Preferred experience in design management and MEP Engineering Design of Healthcare, Life Sciences, and R&D facilities. Extremely commercially aware. Existing network of contacts for potential projects. Proven record of bidding and winning work. Experience managing teams of M&E Engineers and acting as project director for major projects. Ability to work with other directors to shape the future of the business and develop effective strategies to grow the business unit. Technically capable in the design of your engineering bias. We can offer (subject to Company s policy): Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Qualification : B.Tech/M.Tech in Mechanical Engineering or Electrical Engineering.

Job Description Develop safe and efficient structural solutions, and undertake design resolution and preparation of calculations; Manage CAD and Revit technicians, for the delivery of all project work; Ensure checking of all design output and coordination (Interface) between other disciplines; Develop designs and meet delivery as per agreed program; Ensure all design work is carried out in accordance with Mott MacDonald's quality standard procedures. Candidate Specification Minimum 4years of experience in the structural design works for building structures (concrete and steel). We are looking to recruit degree qualified Structural Engineer to join our growing team . Good experience in the design and breakdown of structural designs of buildings and related structures is required, in roles of increasing responsibility and project complexity. Candidate should have experience in the use of design software such as : Robot, Etabs, Ram Concept, CSC, STAAD, RAPT and similar. Mott MacDonald is a leader in the adoption of BIM and therefore the use of Revit Structure would be highly regarded. Candidate should be fully conversant with international design standards and codes. We can offer (subject to Company s policy): Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Qualification : Candidate should have experience in the use of design software such as : Robot, Etabs, Ram Concept, CSC, STAAD, RAPT and similar.

Tool Design Engineer Location: Bangalore Department: Tool Design Designation: Engineer Tool Design About the Role Sansera Engineering is looking for a motivated and skilled Tool Design Engineer to join our dynamic team. The ideal candidate will be responsible for designing, developing, and testing tooling solutions that support efficient and high-quality manufacturing processes. This role requires close collaboration with production, quality assurance, and supply chain teams to ensure successful project execution and continuous improvement. Key Responsibilities Design and develop cutting tools and fixtures using AutoCAD and 3D modeling software. Select appropriate cutting tools based on process requirements and application. Create detailed engineering drawings including isometric views, GD&T, and basic fixtures. Conduct feasibility studies, perform engineering calculations, and analyze tooling costs (process cost, cycle time, tool cost per component). Troubleshoot issues related to cutting tools and machining processes to improve efficiency. Drive continuous improvements in machining and tooling processes. Prepare technical documentation, reports, and project specifications. Assist in project planning, scheduling, and meeting deadlines within budget constraints. Analyze performance data to optimize tool designs and manufacturing processes. Stay updated on the latest industry trends, technologies, and best practices. Ensure compliance with quality assurance standards and safety protocols. Skills and Qualifications Diploma or Bachelor s degree in Mechanical Engineering. 3 to 6 years of experience in tool design, preferably within a manufacturing or machining environment. Proficiency in AutoCAD and 3D CAD tools for tool design. Strong knowledge of cutting tool selection and machining processes. Familiarity with GD&T (Geometric Dimensioning and Tolerancing). Good understanding of manufacturing processes, materials, and cost optimization. Excellent analytical, problem-solving, and communication skills. Ability to collaborate effectively within cross-functional teams. Awareness of quality standards such as ISO and experience with quality assurance processes. Strong project management skills with the ability to handle multiple tasks concurrently. Opportunity to work with a leading engineering company specializing in high-precision automotive and aerospace components. Dynamic and supportive work environment that encourages innovation and professional growth. Involvement in cutting-edge tooling projects that impact global manufacturing operations. Qualification : Diploma or Bachelors degree in Mechanical Engineering

Job Title: Mechanical Design Engineer Location: Bengaluru Experience Required: 2 to 4 years Minimum Qualification: Bachelor of Engineering (BE) Key Skills Mechanical Product Design 3D Modeling (NX or SolidWorks) Engineering Drawing & Documentation Prototyping & Testing FEA & Tolerance Stack-Up Analysis DFMEA & Risk Assessment Cross-functional Collaboration Supplier & Manufacturing Support Job Summary We are looking for a talented and detail-oriented Mechanical Design Engineer to support the development of innovative mechanical products from concept through to production. The ideal candidate will have 2 4 years of hands-on experience in mechanical design, a strong grasp of engineering principles, and a passion for problem-solving and continuous improvement. Key Responsibilities Support mechanical design efforts for new product development from concept to launch. Create detailed 3D models, engineering drawings, and Bills of Materials (BOMs) using NX or SolidWorks. Build and test prototypes to validate design concepts and performance. Collaborate closely with electrical, software, industrial design, and manufacturing teams. Evaluate material choices, manufacturing processes, and cost implications during the design phase. Perform tolerance stack-up analyses, finite element analysis (FEA), and other engineering calculations. Participate in and support design reviews, DFMEA sessions, and risk assessments. Liaise with suppliers and contract manufacturers to ensure design integrity through production. Maintain accurate documentation in line with engineering change control and regulatory requirements. Contribute to continuous improvement initiatives and intellectual property (IP) development. Qualification : Bachelor of Engineering (BE)

Position: Electrical Engineer Location: Bengaluru, Karnataka, India Reporting To: Project Manager Industry: Semiconductor / Automation Qualifications: Education: Bachelor of Engineering (BE) in Electrical Engineering (Mandatory) Experience: 2 to 5 years in related fields (Control Panels, Power Calculations, Circuit Breakers) Software: Proficient in AutoCAD Electrical 2018 or later Candidate Profile: Preferably from Semiconductor Industry or Automation Sector. Hands-on experience in electrical design and control panel schematics. Essential Skills and Experience: Minimum 1 year experience creating detailed point-to-point schematics for Control Panels, Motor Control Centres, Power Distribution Panels. Minimum 2 years of electrical design experience including: Power calculations Component selection Schematic and Bill of Materials (BOM) creation I/O list creation Wire, cable, and harness selection/design Sensor selection (voltage, current, arc, temperature, etc.) Working knowledge of circuit components such as circuit breakers, contactors, relays, protection relays, push buttons, indicators, connectors, terminal blocks, cable routing accessories, and sensors. Desirable Skills: Familiarity with various process sensors: pressure, vacuum, flow, distance, displacement, proximity, limit, rotary and linear position sensors. Knowledge of EMI/EMC principles and panel design. Working knowledge of motor control systems. Responsibilities: Conduct professional electrical engineering research, design, development, modification, and testing related to electrical systems and power distribution/generation. Collaborate with a multidisciplinary engineering team (electrical, mechanical, software, technical support, productivity engineers, suppliers) on design and modifications. Maintain and develop process checkpoints to ensure compliance with design standards and project schedules. Drive process improvements in collaboration with leadership peers. Create electrical schematics and systems based on requirements; generate and release engineering drawings and BOMs. Assist in developing and refining functional specifications for electrical systems and power distribution. Qualification : Bachelor of Engineering (BE) in Electrical Engineering (Mandatory)

Position: Mechanical Design Engineer Location: Bengaluru Industry: Automation / Special Purpose Machinery (SPM) / Semiconductor (preferred) Qualifications: Bachelor s degree in Mechanical Engineering (BE) 3 to 5 years of relevant experience, preferably in machinery or automation sectors Technical Skills: Proficiency in 3D CAD software (mandatory), such as SolidWorks, Autodesk Inventor, or NX Strong expertise in selection and integration of OEM components: motors, couplings, bearings, linear motion guides, O-rings Knowledge of weldment processes, machining for structural design, and sheet metal fabrication for enclosures Ability to create detailed 3D models and GD&T drawings for manufacturing Experience in design calculations like LM guide movement, coupling torque, and O-ring sizing (a plus) Familiarity with semiconductor industry design activities is advantageous Working knowledge of pneumatic, vacuum, and cooling systems is beneficial Soft Skills: Excellent communication skills Willingness to work flexible hours to accommodate US time zone meetings Responsibilities: Develop and generate 3D models and detailed manufacturing drawings adhering to design standards Perform design calculations and validate engineering designs to ensure accuracy and feasibility Collaborate closely with cross-functional teams to select and integrate OEM components appropriately Participate in structural and sheet metal enclosure design and development Keep up-to-date with the latest trends and technologies, especially in semiconductor and automation domains Provide technical support on pneumatic, vacuum, and cooling systems as needed Perform additional related duties as assigned to support project and team objectives Qualification : Bachelors degree in mechanical engineering (BE)

Job Title: Assistant Manager Corporate Finance & Treasury Location: Bangalore Department: Corporate Finance Role Overview We are seeking a detail-oriented and proactive Assistant Manager Corporate Finance & Treasury to manage and optimize Zetwerk s treasury operations. This role involves overseeing cash management, regulatory compliance, banking relationships, and treasury accounting to ensure smooth financial operations and robust control across the organization. Key Responsibilities Monitor and manage daily cash positions across multiple banks and entities to optimize fund utilization, including intercompany fund flows, interest calculations, and short-term investments. Oversee internal and external data management processes to ensure accuracy and compliance; prepare and deliver timely financial and regulatory reports to stakeholders and authorities. Ensure strict adherence to regulatory requirements and contractual covenants, preparing necessary documentation and proactively managing any compliance risks. Execute various payments (vendor, statutory, FX, interest, etc.) in coordination with Accounts Payable and other internal teams, while maintaining compliance with internal controls and Standard Operating Procedures (SOPs). Build and maintain strong relationships with banks and financial institutions to support financing needs, forex transactions, trade finance, and daily banking operations including documentation and account management. Manage end-to-end processes related to issuance and amendments of Letters of Credit (LC) and Bank Guarantees (BG). Monitor foreign exchange exposures and coordinate timely booking of forwards and other hedging instruments to mitigate currency risks. Prepare comprehensive treasury MIS reports on a monthly, quarterly, and annual basis, including cash flow statements, debt schedules, utilization reports, and FX exposure analysis. Support the management of working capital loans (Cash Credit, WCDL, Overdraft) and term loans to optimize financing costs. Ensure accuracy of treasury-related accounting entries and reconciliations in close coordination with the finance and accounts teams. Qualifications & Experience Qualified Chartered Accountant (CA) or MBA with 2 to 6 years of experience in treasury operations, working capital management, and trade finance instruments. Proficient in handling LC/BG issuance, banking documentation, and online banking portals. Solid experience in treasury accounting, cash flow forecasting, and management information system (MIS) preparation. Strong ethical standards, integrity, and problem-solving skills. Ability to thrive in fast-paced, dynamic environments while consistently delivering high-quality results. Join Zetwerk and be part of a fast-growing organization where your expertise in treasury and corporate finance will directly impact the company s financial health and growth trajectory.