Mechanical Mechatronics Engineering Intern Jobs in Panvel,Maharashtra

Quality Specialist Location: Pune Job Type: Full-Time Job Summary The **Product Quality Specialist** plays a critical role in **assessing the quality of inbound and outbound documentation** to ensure compliance with internal quality control standards. This role requires knowledge of operational procedures, the ability to **identify process improvement opportunities**, and expertise in quality systems. The specialist will support both internal and external documentation needs, perform detailed analysis of non-conformances, and coordinate testing activities to maintain **high-quality standards across products.** Primary Responsibilities Documentation Review **Review source documents, including material test records**, to ensure quality, completeness, and compliance with engineering specifications. Record Monitoring & Issue Resolution Monitor, track, and follow up on outstanding record issues, ensuring **timely resolution of discrepancies.** Documentation Changes Respond to and coordinate any requested documentation changes, ensuring accurate recordkeeping. Archiving & Record Support Assist with archiving and scanning, and **provide electronic copies of archived records** as requested for internal and external stakeholders. Quality System Maintenance Help **maintain the quality system requirements** and ensure compliance with the company s standards and practices. Non-Conformance Management **Raise Non-Conformance Reports (NCRs)** for assemblies that do not comply with BOM, GAD, and testing requirements. Collaborate with cross-functional teams to perform **root cause analysis** and provide technical support for corrective actions. Testing & Witness Activities **Perform witness activities for testing** against product standards and NOV test procedures. Coordinate with **Third-Party Inspectors (TPI)** and customer representatives as needed. Test Procedure Development **Review, write, and prepare FAT (Factory Acceptance Test) procedures and test report formats** for new products. Support Quality Practices Assist in developing new work practices and procedures related to quality and continuous improvement. Supplier & Client Assessments Ensure that quality assurance assessments at suppliers and client sites are performed in compliance with company requirements. Training & SOPs Maintain up-to-date training on **Quality Standard Operating Procedures (SOPs)** in relation to the quality system. Facility/Group-Specific Responsibilities 3rd Party Coordination **Schedule and coordinate 3rd party-related tasks**, ensuring alignment with quality and manufacturing teams. Technical & Administrative Support Provide **technical and administrative support** to the quality function, assisting with documentation review, training, and error resolution. Work Order Documentation **Review Work Order specific reports**, including MTR, HT, Dimensional Inspection, and NDT reports, and others. Audit Support Assist in **API Audit document review and preparation**, ensuring all necessary documentation is in place. Product Standards Expertise **Ensure thorough understanding of product standards** (e.g., API 6A, 16A, 16C), particularly regarding quality, calibration, material, testing, and marking requirements. Multiple Task Management **Demonstrated ability to manage multiple tasks** and meet deadlines without compromising on quality. Education & Experience Qualifications Education Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred. Experience For Diploma Holders: **Minimum 6-8 years of experience in quality documentation review and testing** in a manufacturing environment. For Degree Holders: **Minimum 3-4 years of relevant experience.** Skills & Knowledge **Familiarity with MTR and quality documentation review.** Knowledge of hydraulic and electrical schematics. **Proficiency in Microsoft Office** (Word, Excel) and experience with Access and Oracle ERP systems is a plus. **Knowledge of API, ISO, and ASTM standards is preferred.** Job Requirements Documentation Management **Strong ability to manage and review complex documentation** and maintain accurate records. Quality Control & Testing Experience in witnessing tests and **reviewing product quality reports.** Cross-Functional Collaboration **Ability to work closely with cross-functional teams** to resolve quality issues and implement improvements. Behavioral Competencies Must maintain **good behavior and professional conduct** while interacting with colleagues and clients. **Strong written and verbal communication skills** for interacting with various departments, customers, and auditors. Technical Competencies **Strong proficiency in using MS Office** and familiarity with ERP systems (Oracle, Access). **Basic understanding of welding, ASTM standards, and product testing procedures.** Qualification : Diploma or Degree in Instrumentation, Electrical, Mechanical Engineering, or similar field preferred

Manager MEP (Mechanical, Electrical & Plumbing) Location: Pune Company: Gera Developments Pvt. Ltd. Experience Required: 8+ Years Industry: Real Estate / Construction Employment Type: Full-time About Gera Developments: Gera Developments Pvt. Ltd. is a forward-thinking real estate developer known for delivering cutting-edge residential and commercial spaces. With a legacy of trust, quality, and innovation, Gera is at the forefront of redefining living and working environments in Pune, Goa, and Bangalore. Role Overview: As Manager MEP, you will be responsible for overseeing all on-site MEP works and infrastructure execution in accordance with service drawings, specifications, and quality standards. You will play a key role in planning, coordinating, and ensuring timely completion of all MEP and finishing-related activities. Key Responsibilities: Execution & Supervision: Ensure proper execution of MEP and infrastructure works as per design drawings and project specifications. Oversee all finishing activities, including mock-up preparation and approvals. Maintain high-quality standards throughout the execution lifecycle. Planning & Coordination: Prepare Work Breakdown Structure (WBS) and detailed daily/short-term construction schedules. Follow up with contractors for timely resource mobilization, including manpower, materials, and equipment. Work closely with design, planning, and execution teams to resolve site issues. Quality & Compliance: Conduct quality checks for: Drawing dimensions & locations Steel reinforcements Shuttering quality and support stability Ensure adherence to safety and quality protocols. Billing & Material Management: Review and certify RA Bills and Labour Bills. Lead material planning, track deliveries, and ensure drawings are received in advance. Perform material reconciliation to minimize wastage and ensure optimal usage. Cost & Value Engineering: Apply value engineering techniques to optimize MEP costs without compromising on quality or functionality. Candidate Requirements: Education: Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field) Experience: Minimum 8 years of experience in MEP execution, preferably within the real estate or infrastructure sector. Proven track record of handling end-to-end MEP works including finishing stages and cost optimization. Skills & Competencies: Strong understanding of MEP systems and infrastructure works Proficiency in reading and interpreting service drawings Excellent coordination and communication skills Experience in vendor management, billing, and reconciliation Detail-oriented with a strong focus on quality and safety Knowledge of construction planning tools and Microsoft Office Work on landmark real estate projects Be part of a high-performance culture with a focus on innovation Opportunity to make a tangible impact on premium developments Qualification : Bachelor's Degree in Mechanical / Electrical / Civil Engineering (or related field)

Senior Engineer Projects Location: Pune Role Overview As a Senior Engineer Projects, you will lead the mechanical engineering design and documentation efforts for projects from start to finish. Your responsibilities include reviewing customer specifications, finalizing basic designs (P&IDs, GA drawings, BOM), performing piping and structural analyses, and coordinating with vendors and internal teams. You will ensure quality compliance, support procurement through technical evaluations, engage with customers for clarifications and deviations, and oversee project progress through to successful handover. Purpose of the Role Deliver high-quality mechanical engineering design and project execution aligned with customer requirements and industry standards. Key Responsibilities Review customer specifications and inputs to define project scope Generate and manage project documentation and drawings Lead engineering design activities and finalize project basic designs including P&IDs, mechanical equipment layouts, GA drawings, and bills of materials Perform piping and structural analysis; coordinate with designers and engineers to implement design changes Engage with customers through kickoff meetings, query resolution, and deviation management Ensure quality compliance of project documentation and maintain quality records Prepare enquiry datasheets and material requisitions for long lead mechanical items Evaluate vendor technical bids and review vendor drawings and documents Manage sub-vendors through follow-ups, design reviews, and escalation handling Monitor mechanical work progress and report project status and scope variations to project managers Prepare as-built documentation and coordinate project handover to services Perform engineering calculations including pressure drop, head loss, pipe wall thickness, and lifting lug design Provide technical engineering support to E&I, Quality, Purchasing, and Project Management teams Participate in internal and external audits and project kickoff meetings as needed Eligibility & Qualifications Bachelor s degree in Mechanical Engineering Minimum 4 years of experience in piping, oil & gas, or process industry projects Strong knowledge of oil & gas equipment, instruments, piping, and structural systems Familiarity with industry standards such as ASME, ANSI, API, API MPMS, ISO related to oil & gas measurement services Experience with piping and structural welding and non-destructive testing methods Good experience in meter and prover sizing Proficiency in stress analysis using CAESAR-II, STAAD, or equivalent tools Excellent analytical, communication (verbal & written), and drawing skills (AutoCAD/MicroStation) Proficient in Microsoft Office Suite Results-driven, decisive, and capable of delivering innovative solutions Qualification : Bachelors degree in Mechanical Engineering

Executive / Sr. Executive Stores Location: Nagpur Experience: 3 7 Years Qualification: Diploma / Graduate in Mechanical, Metallurgical, or Production Engineering Job Profile & Key Responsibilities Manage and maintain inventory efficiently, ensuring optimal stock levels to support operational requirements. Operate and maintain accurate records in ERP systems (preferably Oracle) and ensure timely data entry and updates. Utilize MS Office tools for reporting, documentation, and analysis. Apply basic accounting principles for inventory reconciliation and stock audits. Monitor and control material movement receipts, issues, and stock transfers. Ensure proper documentation and compliance with internal control procedures. Coordinate with internal departments to fulfill material requirements efficiently. Contribute to continual improvement in store processes and systems. Candidate Profile Proficient in ERP systems (Oracle preferred) and MS Office (Excel, Word, Outlook). Strong communication and interpersonal skills. Good understanding of inventory control principles and warehouse best practices. Analytical and problem-solving mindset with a growth-oriented attitude. Detail-oriented with a focus on accuracy and process compliance. Qualification : Diploma / Graduate in Mechanical, Metallurgical, or Production Engineering

Job Title: Mechanical Engineer (BIM) Location: Pune Experience: 1 5 Years Qualification: B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering Role Overview: We are seeking a highly motivated Mechanical Engineer (BIM) with hands-on experience in Revit MEP and BIM coordination to join our Pune-based team. The ideal candidate will work on a variety of domestic and international projects, handling mechanical services modeling, coordination, documentation, and BIM standards compliance across all stages of the project lifecycle. Key Responsibilities: Review project specifications and technical documents to support BIM execution. Assist in Revit model setup and input data validation. Perform mechanical services modeling using Autodesk Revit MEP and ensure coordination with architecture, structure, electrical, and other disciplines. Support creation of Revit content, parametric families, and detailed mechanical models including HVAC, plumbing, and fire protection systems. Manage project tasks, allocate daily responsibilities, and ensure timely delivery of project milestones. Participate in internal team discussions and client coordination meetings. Create, review, and QA/QC mechanical drawings, fabrication/shop drawings, and builder s work/spool drawings. Conduct clash detection and coordination using tools like Navisworks, BIM 360, BIMTrack, or Revizto. Perform BOQ and quantity take-offs, and contribute to drawing documentation and sheet setup. Adhere to client-specific BIM standards and ensure quality across all project deliverables. Provide technical support and feedback throughout different project phases. Required Skills & Experience: Mandatory: Proficiency in Autodesk Revit MEP and Autodesk Navisworks. Familiarity with AutoCAD is an added advantage. Working knowledge of pipe and duct sizing, pressure drop, and basic mechanical design calculations. Experience working in Common Data Environments such as BIM 360, Bluebeam, Dropbox, or ProjectWise. Hands-on experience with clash coordination tools like BIMTrack, Revizto, or BIM 360 Issues. Experience across diverse project types including residential, commercial, institutional, healthcare, transportation, and data centers. Prior experience with international projects is essential. Strong understanding of Revit modeling tools, including views, sheets, schedules, filters, and family creation. Ability to work on fabrication models, perform hanger/support modeling, and generate shop and spool drawings. Proficiency in mechanical services coordination and QA/QC review of 3D models and documentation. Knowledge of project phases and required deliverables at each stage. Soft Skills & Attributes: Strong oral and written communication skills. Ability to manage and prioritize multiple tasks in a fast-paced environment. Proactive, self-motivated, and adaptable to changing project requirements. Positive attitude with excellent teamwork and interpersonal skills. Professionalism in communication with team members, clients, and stakeholders at all levels. Qualification : B.E./B.Tech in Mechanical Engineering or Diploma in Mechanical Engineering

Category Buyer Indirect Purchase Location: Pune Experience: 5 7 Years Qualification: B.E. Mechanical / Production / IT Industry: Manufacturing / Engineering / Automotive Function: Indirect Procurement / Strategic Sourcing Reports to: Head Indirect Procurement / Purchase Manager Job Summary: We are looking for a Category Buyer Indirect Purchase to manage sourcing and procurement activities across MRO, consumables, IT (Opex & Capex), and other indirect categories. The ideal candidate will be responsible for executing strategic sourcing, optimizing vendor performance, driving savings initiatives, and ensuring procurement efficiency aligned with company objectives. Key Responsibilities: Strategic Sourcing & Procurement: Comply with organizational Procurement-to-Pay (P2P) policies and procedures. Handle end-to-end procurement: PR tracking, technical clarification with users, RFQ preparation, vendor identification, and floating RFQs. Conduct cost negotiations, supplier capability evaluations, and manage reverse auctions where applicable. Prepare commercial comparison sheets (CCS) and seek approvals per Delegation of Authority (DoA) matrix. Issue Purchase Orders (POs) and enter into supplier contracts. Category & Spend Management: Manage procurement for MRO items, plant consumables, and IT assets/software. Drive cost-saving initiatives, conduct spend analysis, and identify supplier consolidation or standardization opportunities. Oversee catalogue management and manage tail-spend optimization. Participate in cross-functional teams (CFTs) for supplier selection, trials, and validation of procurement outcomes. Vendor & Market Analysis: Conduct regular supplier assessments, evaluate market trends, and benchmark pricing. Liaise with suppliers for performance improvement, ensure contract compliance, and optimize payment terms (DPO improvement). Reporting & Compliance: Prepare and present monthly procurement MIS: savings report, PR-PO conversion TAT, PO amendments, DPO tracking, etc. Ensure proper documentation of LC transactions in coordination with the finance team (for overseas procurement). Ensure compliance with commercial terms, import/export norms, and quality/safety standards. Technical Skills & Tools Required: Strong hands-on experience with SAP ERP (MM module). Proficient in MS Excel, PowerPoint, and MS Word. Experience in E-RFQ, E-auction platforms, and e-Procurement tools. Knowledge of Zero-Based Costing (ZBC). Understanding of commercial terms like Inco terms, payment terms, LCs, and tax implications. Familiarity with import transactions and documentation. Soft Skills & Competencies: Strong negotiation and communication skills. Analytical mindset with a focus on cost efficiency. Excellent stakeholder management and collaboration with cross-functional teams. Ability to manage high-value, complex procurement including international sourcing. Exposure to large-scale, high-impact procurement projects. Collaborative and innovation-driven work culture. Opportunities for professional growth and leadership development. Work with a high-performing supply chain team in a dynamic, growing organization. Qualification : B.E. Mechanical / Production / IT

Program Manager RFQ Location: Pune Experience: 5 7 Years Industry: Automotive / Manufacturing / Engineering Department: Program Management / Costing / Business Development Support Function: RFQ Management, Product Costing, Cross-functional Program Execution Job Summary: We are looking for an experienced Program Manager RFQ to lead and manage the end-to-end RFQ (Request for Quotation) process by closely coordinating with Business Development, R&D, Manufacturing Engineering, Supply Chain, and Costing teams. The role requires strong technical, commercial, and program management skills to support business acquisition efforts and ensure accurate and timely cost proposals to customers. Key Responsibilities: 1. RFQ Planning & Coordination: Act as the single point of contact between CFT and Business Development (BD) teams. Participate in Kick-off meetings (DR0/Phase 0) to define customer expectations, RFQ targets, and project milestones. Drive execution of RFQs through PLM tool, ensure project plan is created and updated regularly by CFT. Maintain departmental RFQ trackers and ensure timely closure of tasks. 2. Technical & Costing Feasibility: Coordinate with R&D for BOM, technical specifications, and risk identification. Facilitate engineering, manufacturing, and commercial feasibility assessments with CFT. Liaise with SCM, Tooling, and ME teams to gather inputs on tooling cost, BOP quotes, and capital investments. Review and validate tooling cost breakdown and share it with BD in customer-specific formats. 3. Cost Sheet Preparation & Analysis: Prepare detailed cost sheets aligned with benchmarks and internal targets. Conduct investment analysis using IRR, NPV, and RMC calculations. Support BD in customer negotiations with cost justifications, break-ups, and scenario planning. Maintain centralized cost database for reference and person-independent execution. 4. Gate Review & Program Handover: Track cost evolution across Gate exits, monitor deviations vs. Phase 0 plan. Lead Gate 0 closure and officially handover the project to Program Manager for development phase. Plan phase-wise execution with alignment from SCM and CFT. 5. Win-Loss Analysis & Continuous Improvement: Conduct Win-Loss analysis of RFQs handled, capture learnings, and drive continuous improvement. Optimize BOM costs and capital investments during execution versus Gate plans. Special Focus Areas: Polymer / Metallic Product RFQs Evaluate SOR, CSR, tooling, FTG requirements. Participate in supplier visits for evaluation and negotiation support. Support technical feasibility studies, DVP cost reviews, and risk assessments with internal teams. Required Skills & Qualifications: Bachelor s degree in Engineering (Mechanical / Production preferred). 5 7 years of experience in RFQ management, product costing, and automotive program management. Strong understanding of BOM structures, investment planning, tooling strategy, and costing principles. Hands-on experience with PLM tools, costing software, and Excel-based costing models. Exposure to IRR, NPV, benchmarking, and cost optimization frameworks. Excellent techno-commercial acumen, negotiation skills, and cross-functional leadership. Preferred Experience: Prior experience in automotive product development or costing departments. Familiarity with metallic product costing, supplier tool audits, and customer negotiation support. Knowledge of Gate-based product development processes. Lead strategic RFQ initiatives that directly impact business wins. Work with cross-functional teams on technically complex and commercially significant projects. Be part of a growth-driven, innovation-focused automotive engineering company. Qualification : Bachelors degree in Engineering (Mechanical / Production preferred)

Position: Robot & PLC Engineer Location: Pune Company: FORVIA A Leader in Sustainable Mobility Technology About FORVIA At FORVIA, we pioneer technologies that shape the future of mobility. As the world s 7th largest automotive supplier, we are committed to driving innovation in sustainability, safety, and user experience. With over 157,000 employees in 43 countries, we re creating smarter, cleaner, and more connected mobility solutions for tomorrow. Your Mission As a Robot & PLC Engineer, you will play a key role in optimizing and maintaining automation systems within our manufacturing processes. You ll support both plant operations and new program development by ensuring efficient performance, troubleshooting issues, and driving process improvements in robotics and PLC systems. Key Responsibilities Process Development & Support Support the development and improvement of automation processes across the plant. Maintain and validate innovations in robotics and PLC systems. Provide expert-level support to production teams, suppliers, and program teams. PLC & Robot Maintenance Ensure proper backup and maintenance of PLC and robot programs across all equipment. Troubleshoot and resolve automation-related issues efficiently. Continuous Improvement Identify and implement improvements in tooling, automation, and equipment performance. Analyze and execute Engineering Change Management (ECM) for automation systems. Program & Equipment Support Collaborate with cross-functional teams during new program launches. Support tooling and equipment validation, installation, and ramp-up activities. Provide feedback and insights on plant performance and process optimization. Standards & Best Practices Enforce the use of process design checklists, guidelines, and global standards. Contribute to the creation and sharing of best practices within your domain of expertise. Your Profile Education & Experience Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering. 8 10 years of experience in PLC programming, industrial automation, and robotics in the automotive industry. Technical Skills Proficiency in PLC programming (Siemens, Allen-Bradley, Studio 5000, etc.). Experience with HMI/SCADA systems (Wonderware, WinCC, FactoryTalk View, etc.). Strong understanding of industrial communication protocols (Ethernet/IP, Modbus, Profibus, DeviceNet, etc.). Ability to read and interpret electrical schematics, panel layouts, and system diagrams. Hands-on experience with sensors, actuators, VFDs, and control components. Soft Skills Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Leadership qualities such as managing complexity, cultivating innovation, and driving results. Innovation-Driven Culture: Work on cutting-edge technology shaping the future of mobility. Global Opportunities: Join a diverse, international team with opportunities for global collaboration and career growth. Learning & Development: Access to FORVIA University, with over 22 hours of training per employee annually. Diversity & Inclusion: We value and foster an inclusive culture that celebrates diversity. Sustainability Commitment: Certified under the SBTi Net-Zero Standard, we re committed to achieving CO2 Net Zero by 2045. Impactful Work: Contribute to projects that make a real difference in reducing emissions, enhancing user experience, and transforming the industry. Be Part of the Change Join FORVIA and be a part of our journey toward smarter, cleaner, and more sustainable mobility. Qualification : Bachelor's degree in Mechatronics, Electrical, or Electronics Engineering

Position: Project Engineer MEP Costing Location: Pune Job Type: Full-Time Company: vConstruct (a DPR Construction Company) About vConstruct At vConstruct, we are redefining construction by building better, smarter, and faster. As a team of over 480 construction technology professionals, we partner globally to deliver services in Virtual Design & Construction (VDC), Project Controls, Cost Estimation, Data Analytics, and more. A subsidiary of DPR Construction, we support complex, large-scale projects across industries such as healthcare, life sciences, commercial, data centers, higher education, and advanced tech. On any given day, our work impacts 100+ construction projects worldwide. Role Overview We are seeking an experienced MEP Estimating Engineer to join our Costing Cluster as a Project Engineer MEP Costing. You will be responsible for reviewing project design documents (2D/3D), quantifying MEP scopes (HVAC, Plumbing, Electrical, Fire Protection, etc.), and developing detailed cost estimates for high-value global construction projects. This role requires a solid understanding of building systems, particularly MEP, and the ability to work with both local and international project teams. Key Responsibilities Prepare accurate quantity takeoffs and cost estimates using CSI Uniformat and MasterFormat coding standards. Review and interpret design drawings, specifications, RFIs, and BIM models to identify scope and discrepancies. Perform quantification across HVAC, plumbing, piping, fire protection, electrical, and low-voltage systems. Leverage 3D models (Revit, etc.) to enhance or directly extract quantity estimates. Build 3D models from 2D drawings when necessary to support estimation. Analyze design version changes and clearly communicate their cost impact. Collaborate closely with U.S.-based estimators to align on project deliverables and expectations. Proactively communicate via email and virtual meetings with global project teams. Understand and execute new workflows, platforms, and estimation processes; document and train others as needed. Support cross-functional construction estimating work beyond core MEP scopes. Requirements & Qualifications Bachelor s or Master s degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying). Minimum 2 years of experience in building construction, with a strong focus on MEP estimation. Knowledge of construction systems in sectors such as hospitals, commercial offices, data centers, manufacturing, or life sciences is preferred. Familiarity with US, European, or Indian construction documents and terminology. Working knowledge of quantification and estimation software such as Revit, Assemble, CostX, OST, or Planswift. Proficiency in Microsoft Excel and general data management for cost tracking. Strong analytical, communication, and collaboration skills. Proactive, self-driven, and capable of working independently with minimal supervision. Work on high-impact, cutting-edge global construction projects. Be part of a forward-thinking, inclusive, and collaborative team culture. Opportunity to grow with an industry leader in construction technology and virtual design. Learn continuously through exposure to global best practices and cross-functional training. Our Core Values Integrity is Integral People are Pivotal Ever Forward Spirit If you re passionate about MEP systems, cost estimation, and driving innovation in construction, we d love to hear from you. Qualification : Bachelors or Masters degree in Mechanical or Electrical Engineering (preferably with a specialization in Quantity Surveying)

Position: Manager / Senior Manager Engineering Design Location: Pune Reports To: Engineering Project Lead Educational Qualification: B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering Experience: 12 16 years Industry: Construction Equipment / Automotive / Heavy Engineering Purpose of the Role To lead the end-to-end design and development of construction and earthmoving vehicles (CEV), ensuring innovation, functionality, manufacturability, and cost-effectiveness. This role is responsible for full product lifecycle management, from concept development and prototyping to validation, production readiness, and continuous improvement. Key Responsibilities Full Lifecycle Product Development Drive product development from concept through design, prototyping, testing, manufacturing, and implementation for CEVs. Develop system and component-level solutions aligned with functional, cost, material, and manufacturing requirements. Design Execution & Evaluation Create and review system concepts to ensure innovative and competitive design. Perform 3D modeling, 2D detailing, tolerance stack-ups, and geometric dimensioning (GD&T) using industry-standard CAD tools. Ensure designs are production-ready, meeting engineering, safety, and quality standards. Testing, Validation & Analysis Coordinate testing activities, including trial setups, instrumentation, and performance evaluations. Analyze test data, validate design intent, and implement necessary modifications. Conduct complex engineering calculations for strength, stiffness, service life, and material performance. Collaboration & Coordination Coordinate with internal cross-functional teams and external partners (vendors, design houses) for development and validation activities. Provide specifications, supervise and validate output from external design service providers. Resolve engineering issues and support production and service teams with design inputs. Design Documentation & Control Create and maintain technical documentation: engineering drawings, BOMs, cost comparison sheets, and design change notes. Ensure timely execution of engineering change requests (ECRs) and track their implementation. Use PLM and ERP systems for revision control and release management. Innovation & Standardization Drive the creation of new concepts for components, systems, and subsystems. Standardize parts and subassemblies to improve design efficiency and reduce cost. Identify opportunities for process improvement and design optimization. Key Competencies & Skills Deep technical knowledge in structural systems, fabrication, and vehicle integration. Proficiency in CAD tools (e.g., Creo, CATIA, SolidWorks) and PLM systems. Strong analytical skills in engineering calculations (load path, stiffness, stress, fatigue). Expertise in GD&T, tolerance analysis, and manufacturing drawing preparation. Hands-on experience with design problem-solving and root cause analysis. Effective communication and stakeholder management skills. Ability to lead cross-functional design reviews and mentor junior engineers. Role Authorities Accountable for design ownership and lifecycle maintenance of assigned systems/products. Responsible for execution and approval of engineering changes related to design. Qualification : B.E. / B.Tech or higher in Mechanical / Automotive / Design Engineering

Position: Assistant Manager MEP Location: Mumbai Department: Sales Job Purpose To manage the implementation of Mechanical, Electrical, and Plumbing (MEP) services across project sites, ensuring that all activities are executed within the defined timelines, budget, and quality standards. Key Responsibilities Oversee and coordinate all MEP-related work on project sites. Act as the primary technical liaison for MEP services with external consultants, contractors, and agencies. Collaborate with the internal design team to review and coordinate MEP drawings and documentation. Verify design documents for accuracy, relevance, and compliance with project requirements. Prepare detailed project schedules and timelines for MEP works in coordination with the planning team. Ensure effective execution and coordination of MEP works at the site, working closely with building engineers. Monitor and report weekly progress of MEP activities. Review and approve shop drawings and ensure documentation is accurate, complete, and audit-ready. Ensure quality compliance for PHE (Public Health Engineering) systems and maintain zero non-conformities during audits. Certify bills related to PHE works after due verification. Performance Indicators Individual Accountability Timely execution of PHE works On-schedule vendor finalization Budget adherence for electrical works Compliance with safety and quality standards Quality and durability of PHE installations Shared Accountability Collaboration across internal teams for project success Effective coordination with consultants and contractors Key Stakeholders External MEP Consultants Contractors Internal Site Execution Teams MEP Design Team Functional Competencies In-depth understanding of PHE systems and technical specifications Familiarity with green building materials and sustainability norms Knowledge of safety standards and OHSAS compliance Proficiency in electrical and mechanical design concepts Leadership Competencies (Mahindra Core Competencies) 1. Leveraging Human Capital Foster trust and teamwork within and across teams Empower team members by recognizing and developing their strengths Demonstrate ownership and drive performance 2. Weaving Passion & Energy at Work Promote innovation and support creative problem-solving Learn from setbacks and encourage thoughtful risk-taking Exhibit empathy and active engagement with team members 3. Result Orientation with Execution Excellence Lead by example in achieving project milestones Ensure quality improvement and timely delivery Take full ownership of team goals and deliverables Qualifications and Experience Qualification: B.E./B.Tech. in Mechanical Engineering Experience: 7 8 years of relevant experience in MEP project execution and management Qualification : B.E./B.Tech. in Mechanical Engineering

Position: Engineer Procurement Department: Supply Chain Management (SCM) Division: Corporate Location: Mumbai Experience: 2 4 years Qualification: B.E. in Mechanical / Electrical / Civil Engineering Job Purpose To manage end-to-end procurement activities including purchasing, vendor management, logistics coordination, stores management, and inventory control. The role involves ensuring timely availability of materials and services, maintaining cost efficiency, and adhering to organizational policies and compliance standards. Key Responsibilities Procurement Operations: Handle complete procurement lifecycle: from raising enquiries, quotation analysis, technical/commercial evaluation, vendor finalization, negotiation, and issuing purchase orders (POs). Streamline and manage procurement processes for raw materials, engineering goods, consumables, chemicals, spares, packaging materials, capital goods, etc. Ensure timely procurement of materials and services as per project schedules. Maintain updated procurement records, including vendor documentation, purchase history, and price trends. Review and follow up on stock levels to maintain optimal inventory. Conduct regular market research to identify alternative suppliers, materials, and cost-saving opportunities. Vendor & Supplier Management: Build and maintain strong supplier/contractor relationships to ensure smooth and transparent business transactions. Continuously assess vendor performance on delivery, cost, and quality parameters. Lead vendor development initiatives to onboard capable suppliers in line with project and quality requirements. Obtain feedback on supplied goods/services and resolve any discrepancies through corrective or preventive measures. Logistics & Stores Coordination: Oversee logistics for inbound and outbound material movement (domestic and international), including all import/export documentation and statutory requirements. Coordinate inter/intra-state and international shipments to ensure timely delivery. Support stores and warehouse teams for efficient inventory management, material retrieval, and proper storage mechanisms. Cost & Compliance: Drive cost optimization through strategic sourcing, negotiation, and alternative procurement methods. Ensure procurement operations align with ISO compliance and internal control standards. Collaborate with compliance teams to generate and track all reports related to POs and procurement processes. Actively participate in the procurement budgeting process and contribute to cost tracking and forecasting. Cross-Functional Collaboration: Coordinate with project, engineering, and other internal departments to assess material requirements and specifications. Attend and conduct negotiation and project discussion meetings with cross-functional stakeholders. Team & Performance Management: Set goals for subordinates and monitor performance regularly. Mentor and guide team members for professional development and process improvement. Promote a collaborative, efficient, and accountable team culture. Preferred Candidate Profile Bachelor s degree in Mechanical, Electrical, or Civil Engineering. 2 4 years of experience in procurement, supply chain, or sourcing roles, preferably in a project-based or engineering organization. Solid understanding of supply chain processes, vendor management, inventory control, and logistics. Excellent negotiation, analytical, and communication skills. Proficiency in MS Office, ERP systems, and procurement software. Knowledge of Indian taxation, import/export processes, and ISO standards. Strong attention to detail, time management, and problem-solving ability. Qualification : B.E. in Mechanical / Electrical / Civil Engineering

Position: Sr. Manager Procurement Department: Supply Chain Management (SCM) Division: Corporate Location: Mumbai Experience: 10+ years Qualification: B.E. Civil / Mechanical Job Purpose To lead the procurement function by managing end-to-end sourcing, vendor relationships, cost optimization, and supply chain compliance to ensure the timely and cost-effective availability of materials and services for project and business operations. Key Responsibilities Procurement Operations Manage the full procurement cycle: vendor identification, quotation analysis, commercial/technical negotiation, and purchase order issuance. Ensure timely and cost-efficient procurement of materials, equipment, and services. Oversee logistics and stores functions to ensure smooth material movement and inventory control. Strategic Sourcing & Cost Optimization Drive cost-saving initiatives through strategic sourcing and supplier consolidation. Identify alternate vendors and materials to reduce costs without compromising on quality or timelines. Monitor procurement trends, pricing benchmarks, and market developments. Vendor & Supplier Management Develop and maintain strong, collaborative relationships with key suppliers and vendors. Monitor supplier performance in terms of delivery timelines, quality, and service levels. Lead vendor development initiatives to build a robust and reliable supplier base. Conduct regular vendor review and negotiation meetings to ensure continuous improvement. Cross-Functional Coordination Collaborate with project, engineering, and operations teams to forecast and fulfill material requirements. Resolve disputes or discrepancies related to material quality, delivery schedules, or invoicing. Support compliance with all internal procurement policies, processes, and ISO standards. Regulatory & Documentation Compliance Manage import/export processes and ensure compliance with all regulatory documentation and statutory requirements. Maintain accurate procurement records, contracts, and reports for internal audits and performance tracking. Leadership & Team Development Lead, mentor, and guide the procurement team; define clear goals and KPIs. Encourage a culture of accountability, efficiency, and continuous improvement within the team. Provide coaching and training to enhance the team s capabilities in sourcing, negotiation, and vendor management. Preferred Candidate Profile Bachelor's degree in Civil or Mechanical Engineering. Minimum of 10 years of experience in procurement, preferably in engineering, construction, infrastructure, or EPC sectors. Proven experience in vendor management, cost optimization, import/export handling, and team leadership. Strong commercial acumen and negotiation skills. Proficiency in ERP systems and MS Office tools. Familiarity with ISO standards and procurement compliance procedures. Qualification : B.E. Civil / Mechanical

Position: Technical Buyer Vessel Procurement Department: Supply Chain Management (SCM) Division: Corporate Location: Mumbai Experience: 7 9 years Qualification: Diploma in Mechanical / Civil Engineering or Graduate in Commerce Job Purpose To manage procurement operations specific to marine assets including tugs, barges, and support vessels by ensuring timely sourcing of spares, consumables, capital items, and services to support uninterrupted vessel operations across various projects. Key Responsibilities Procurement Operations Process material requisitions and indents received from vessels, ensuring timely procurement of all required items. Procure capital equipment, spares, inventory items, consumables, and marine-specific services for vessels across projects. Float RFQs, evaluate technical and commercial proposals, finalize vendors, and issue purchase orders. Ensure timely material delivery through regular follow-ups with suppliers and logistics partners. Vendor Management Develop and maintain a strong network of reliable suppliers, vendors, and contractors in the marine domain. Conduct performance assessments of vendors based on delivery, quality, and service levels. Negotiate terms and prices to drive cost savings without compromising quality or timelines. Identify and implement alternative sourcing options for critical items. Cross-Functional Collaboration Coordinate closely with vessel teams, owners, and internal stakeholders to understand technical specifications and procurement requirements. Share daily material status updates with indentors and vessel managers. Resolve material discrepancies or vendor issues promptly to minimize operational downtime. Process Improvement & Compliance Ensure adherence to company procurement policies and marine procurement best practices. Monitor and continuously improve procurement processes for efficiency and transparency. Maintain all procurement documentation and records as per audit and ISO compliance requirements. Preferred Candidate Profile Diploma in Mechanical or Civil Engineering, or Graduate in Commerce. 7 9 years of relevant procurement experience, preferably in marine, offshore, shipping, or EPC industries. Strong understanding of vessel operations, marine spares, consumables, and equipment. Excellent negotiation, vendor development, and communication skills. Ability to coordinate effectively with cross-functional and vessel-based teams. Familiarity with procurement software, ERP systems, and MS Office tools. Qualification : Diploma in Mechanical / Civil Engineering or Graduate in Commerce

Position: Automation Engineer Mechatronics Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Industry: Plastic Injection Moulding Automotive & Allied Sectors Experience Required: 5 9 years Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, serving the automotive and other precision-demanding sectors. With a commitment to innovation and reliability, we deliver engineering excellence through advanced manufacturing technologies. Position Overview We're looking for a skilled and motivated Automation Engineer Mechatronics to lead the development, implementation, and optimization of Special Purpose Machines (SPMs) and automation systems. The ideal candidate will play a key role in evaluating project feasibility, managing technical documentation, vendor coordination, PLC and robot programming, and providing ongoing support for production and maintenance teams. Key Responsibilities Evaluate new project requirements and propose appropriate automation technologies. Participate in cross-functional team (CFT) and customer meetings to define project scope. Prepare and manage technical documents such as concept designs, time plans, and PFMEAs. Identify suitable vendors, issue RFQs, and evaluate quotations. Oversee project timelines from concept through commissioning and handover. Train production and maintenance teams for effective handling of new machines. Provide troubleshooting and maintenance support for SPMs and automation equipment. Identify process improvement opportunities and implement Kaizen initiatives. Qualifications Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering. 5 9 years of relevant experience in automation engineering and SPM development. Technical Skills Required PLC Programming: Siemens, Delta, Mitsubishi. Robot Programming: ABB, Fanuc, Wittmann, Star, Epson, Yaskawa. Hands-on experience in SPM development, maintenance, and troubleshooting. Additional Skills Strong technical, supervisory, and project management skills. Proficiency in MS Office (Word, PowerPoint, Outlook, Internet). Resourceful, self-motivated, and results-oriented with the ability to multitask effectively. Be part of a forward-thinking team at RENATA, where engineering, innovation, and quality converge. If you're passionate about automation, thrive in a fast-paced environment, and are eager to make a tangible impact on advanced manufacturing systems, we invite you to grow with us. Qualification : Diploma or Bachelor's Degree in Electrical, Mechatronics, or Instrumentation Engineering

Position: Junior Engineer Tool Design (Progressive Stamping / Press Tool) Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 2 4 years Industry: Plastic Injection Moulding & Automotive Components Company Overview RENATA Precision Components Pvt. Ltd. is a trusted manufacturer of high-precision plastic injection moulded components serving the automotive and other engineering industries. We are committed to delivering quality and innovation through continuous improvement and advanced engineering practices. Position Overview We are looking for a Junior Engineer Tool Design (Progressive Stamping) with hands-on experience in designing press tools. The ideal candidate will assist in 3D and 2D tool design, collaborate with senior designers and tool room teams, and contribute to the successful execution of tooling projects. Key Responsibilities Prepare 3D and 2D designs for press tools and progressive stamping dies. Collaborate with senior designers and the tool room team to document lessons learned from previous projects. Create detailed 2D drawings and perform cross-checks to ensure accuracy. Support root cause analysis for design-related issues and assist in implementing corrective actions. Adhere to project time plans and maintain timely documentation throughout the design phase. Follow and maintain 5S standards in the workplace. Ensure compliance with design and quality standards throughout the project lifecycle. Qualifications & Experience Diploma or BE in Mechanical Engineering. 2 4 years of experience in press tool / progressive stamping tool design. Required Skills Solid understanding of tool design principles and manufacturing processes. Proficiency in 3D and 2D CAD software (e.g., AutoCAD, SolidWorks, UG NX, or similar). Basic knowledge of design documentation and GD&T. Strong attention to detail, ability to multi-task, and meet project deadlines. Good knowledge of MS Office (Word, Excel, PowerPoint, Email, Internet). Effective communication and collaboration skills. Join RENATA to work alongside talented engineers in a fast-paced and innovation-driven environment. We support career development, offer hands-on project exposure, and foster a culture of teamwork and continuous improvement.

Position: Customer Quality Engineer Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 3 5 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a leading manufacturer of high-quality plastic injection moulded components, catering to the automotive and other engineering industries. We're committed to delivering precision, quality, and customer satisfaction through continuous improvement and adherence to global standards. Position Overview We're looking for a skilled and proactive Customer Quality Engineer to manage customer complaints and ensure compliance with quality standards in line with automotive industry requirements. This role demands a hands-on approach to quality systems, documentation, and effective problem-solving. Key Responsibilities Act as the primary point of contact for handling and resolving customer complaints. Prepare and maintain PPAP (Production Part Approval Process) documentation as per customer and IATF requirements. Utilize problem-solving tools (e.g., 8D, 5 Why, Fishbone) to analyze and address quality issues. Ensure adherence to IATF 16949:2015 quality management system standards. Coordinate with internal departments to implement corrective and preventive actions. Maintain clear and professional communication with customers regarding quality concerns. Support audits and quality system improvements based on customer feedback and internal reviews. Qualifications & Experience B.E. in Mechanical or Production Engineering. 3 to 5 years of experience in a customer quality role within the automotive manufacturing industry. Skills & Competencies In-depth understanding of automotive quality standards and processes. Strong knowledge of PPAP, APQP, FMEA, SPC, MSA. Proficient in using quality tools and methodologies for root cause analysis. Effective communication and interpersonal skills for customer engagement. Proficient in MS Office (Word, Excel, PowerPoint, Outlook). Detail-oriented, resourceful, and able to manage multiple tasks effectively. Be part of a dynamic quality team at RENATA and contribute to delivering world-class components to global automotive clients. We offer a collaborative work environment, opportunities for professional development, and a strong focus on continuous improvement and customer satisfaction.

Position: Assistant Manager Injection Molding & Assembly Location: Pune, Maharashtra, India Employment Type: Full-Time Company: RENATA Precision Components Pvt. Ltd. Experience Required: 8 12 years Industry: Plastic Injection Moulding Automotive & Allied Sectors Company Overview RENATA Precision Components Pvt. Ltd. is a premier manufacturer of plastic injection moulded components, serving the automotive and other engineering industries. We are known for delivering precision-engineered solutions and maintaining a strong focus on quality, innovation, and operational excellence. Position Overview We are seeking an experienced and dynamic Assistant Manager Injection Molding & Assembly to oversee daily production operations, ensure effective resource utilization, and drive process improvements. The ideal candidate will possess strong leadership skills, deep technical expertise in plastic processing, and a proactive approach to quality and efficiency. Key Responsibilities Review monthly production schedules from PPC and develop detailed execution plans. Monitor raw material availability and coordinate with the stores team to avoid shortages. Plan and manage timely mold changes to ensure seamless production. Drive continuous improvement in production processes and overall equipment effectiveness (OEE). Maintain accurate documentation of production activities and ensure process traceability. Prepare and implement action plans for reducing rejection PPM and improving OEE metrics. Supervise machine operators and communicate mold loading schedules effectively. Coordinate emergency loadings and trial runs, ensuring minimal disruption to regular production. Promote harmony within the department and maintain strong inter-departmental relationships. Train teams on new products and processes introduced into production. Set and monitor targets for setup rejections and production efficiency. Allocate manpower based on daily production needs. Collaborate with the Production Planning & Control (PPC) team for effective scheduling. Ensure strict process conformity and adherence to standard operating procedures. Foster a strong culture of safety and 5S in all operations. Qualifications & Experience Diploma / B.E. in Mechanical Engineering, Plastic Processing, or from CIPET. 8 12 years of hands-on experience in injection molding and assembly operations, preferably in the automotive sector. Key Skills Sound knowledge of injection molding machines, mold setup, and processing parameters. Strong leadership and team management capabilities. Effective communication and coordination skills. Proficiency in MS Office tools (Word, Excel, PowerPoint, Email, Internet). Excellent troubleshooting and decision-making abilities. Results-driven with a focus on quality, efficiency, and continuous improvement. Be a part of a progressive manufacturing environment at RENATA, where innovation, quality, and teamwork are at the core of everything we do. We offer a structured growth path, competitive compensation, and the opportunity to contribute to world-class automotive manufacturing solutions.

Job Title: Assistant Manager Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products across a vast spectrum from steel pipes to aerospace engine components, metal bridges to consumer electronics. Serving both small businesses and Fortune 500 companies, Zetwerk connects customers with thousands of manufacturing partners skilled in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven supply chain enables faster, cost-effective manufacturing with world-class quality and transparency. Through our proprietary Manufacturing Operating System (ZISO), we provide end-to-end visibility from order placement to final delivery ensuring seamless collaboration among product designers, manufacturers, quality inspectors, logistics providers, and other stakeholders. At Zetwerk, we believe in empowering game changers who want to shape the future of manufacturing. We offer an environment designed to fuel your career growth, foster innovation through collaboration, and connect you with leaders who inspire you to go beyond. Our inclusive culture supports you to thrive and make an impact every day. Role Overview As Assistant Manager Quality, you will play a pivotal role in ensuring the quality and reliability of heavy fabricated components and assemblies for our North America business. You will lead the implementation of QA/QC procedures, drive continuous improvement, and collaborate across teams to uphold stringent quality standards. Key Responsibilities Plan and execute QA/QC procedures and inspection protocols throughout fabrication and assembly stages. Develop, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and assemblies. Perform detailed inspections of machined parts, verifying dimensional tolerances using precision measuring instruments. Review and approve surface treatment and painting processes in compliance with standards (e.g., SA 2.5 blast cleaning, DFT measurements). Lead root cause analysis (RCA) and coordinate corrective and preventive actions (CAPA) for quality issues. Evaluate supplier quality documentation and conduct incoming material inspections for castings, forgings, and fabricated items. Implement and maintain Core Quality Tools: FMEA, Control Plan, MSA, SPC, and PPAP, as applicable. Drive continuous improvement initiatives to reduce defects, rework, and improve overall quality performance. Travel to supplier locations across Pune and other regions to support quality assurance activities. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related discipline. Minimum 7 years of experience in QA/QC roles, preferably in heavy fabrication or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient with Core Quality Tools: FMEA, MSA, SPC, PPAP, and Control Plans. Working knowledge of quality management standards such as ISO 9001, IATF 16949, ASME, AWS. Hands-on experience with precision inspection instruments and interpreting engineering drawings and GD&T. Willingness to travel regularly to supplier sites. Join Zetwerk and be part of a revolutionary manufacturing ecosystem where your expertise drives quality and excellence at scale. Qualification : Bachelors degree in Mechanical Engineering or related discipline.

Job Title: Senior Engineer Quality Location: Pune Department: Quality Assurance / Quality Control Experience Level: Minimum 7 Years Relevant Experience Business Unit: North America Business About Zetwerk Zetwerk is the world s largest global manufacturing network for custom manufacturing, transforming digital designs into physical products. Our manufacturing solutions span simple items like steel pipes to complex aerospace components, serving industries such as Oil & Gas, Energy, Infrastructure, Aerospace, Renewables, Electric Vehicles, Consumer Electronics, and Space. With thousands of manufacturing partners, Zetwerk offers expertise in metal fabrication, CNC machining, plastic injection molding, 3D printing, aluminum die casting, and more. Our technology-driven platform delivers faster, cost-effective manufacturing with world-class quality and complete transparency through our proprietary Manufacturing Operating System, ZISO. Zetwerk is revolutionizing manufacturing by connecting and empowering stakeholders across the supply chain. We provide a collaborative and innovative work environment that supports career growth, ambition, and an inclusive culture. Join us to be a part of a company where your impact truly matters. Role Overview As a Senior Engineer Quality, you will play a critical role in implementing and managing quality assurance and control processes for heavy fabricated components and assemblies. You will lead quality inspections, ensure compliance with standards, and drive continuous improvements to enhance product quality and reliability. Key Responsibilities Develop and execute QA/QC procedures and inspection protocols across all fabrication and assembly stages. Prepare, review, and approve Inspection Test Plans (ITPs), Work Instructions, and Quality Plans. Conduct in-process and final inspections for heavy fabricated components and structures. Evaluate welding procedures and supervise weld inspections ensuring compliance with standards. Interpret and supervise Non-Destructive Testing (NDT) reports. Inspect machined components, verifying dimensional tolerances with precision instruments. Review and approve surface treatment and painting processes per standards (e.g., SA 2.5, DFT measurement). Support root cause analysis (RCA), corrective and preventive action (CAPA) initiatives. Review supplier quality documentation and incoming material inspections for castings, forgings, and fabricated items. Drive continuous improvement projects to reduce defects, rework, and rejection rates. Qualifications & Experience Bachelor s degree in Mechanical Engineering or related field. Minimum 7 years of relevant experience in QA/QC for heavy fabrication, preferably within industrial or capital equipment manufacturing. Strong expertise in fabrication, welding, and machining inspection. Proficient in Core Quality Tools: FMEA, MSA, SPC, PPAP, Control Plans. Knowledge of quality standards including ISO 9001, IATF 16949, ASME, and AWS. Hands-on experience with precision inspection instruments and interpretation of engineering drawings and GD&T. Willingness to travel to supplier locations across Pune and other parts of India. Join Zetwerk and contribute to a transformative manufacturing ecosystem delivering quality and innovation at scale. Qualification : Bachelors degree in Mechanical Engineering or related field.